What is the Id of navigation button?

Hi all
I need to know what is the ID of the navigation button which allows navigation between records using the UDO. (the button appears at the top toolbar)
thanx in advance
Yoav

Hi Yoav,
these are the id's of navigation buttons -
First Data Record     - 1290
Previous Record     - 1289
Next Record     - 1288
Last Data Record     - 1291
Hope you will got your solution.

Similar Messages

  • MM - PO - what is the meaning of this button?

    Dear friends,
    Could anybody help me with one question.
    There is a strange button in a Purchasing Order on the Account Assignment tab page on this screenshot (it is marked with red color).
    Screenshot below
    http://content.foto.mail.ru/mail/raiden87/81/i-84.jpg
    What is the meaning of this button? When it is used for?
    I hope that anybody knows the meaning =)

    hi raiden,
    as for as i have gone through the issue I have come to know that:
    If you want to use multiple account assignment for a line item in PO then at that moment you will have to first press the "repeat on " button. only after that multiple account button will be active that is just before your "repeat on " button.
    Steps:
    1:Save your PO.
    2:Go to transaction code ME22N to change the PO.
    (Here you will firstly see that the multiple a/c assignment button is firsty gray.It will become active only after when you press the "repeat on" button).
    I hope It will be helpfull for you.
    regards,
    Aslam Ansari.

  • Change Behaviour of the 4 Browse / Navigation Buttons

    Hi!,
    In documents, Iam using a new series each period/month for each type of documents, for example for a quote document in october, the series was named 200810 , for november, the series was named 200811 and so on. So each time a new period/month pases, my DocNum, starts again from 1. This gives me great control in my numbering system, but I get an inconvinience when using the 4 browse/navigation buttons, becuase If I click the last record button, it gives me the document with the biggest DocNum. Not the actual last record.
    Please Help!
    Thank you!

    Please note: when you get something very convenient, chances are you are also get some by-products that may not be that convenient.
    Unfortunately, you have to type in the number to find if this number is not in the current series selection.  Another way will be making sure the number series is the right one to get the max number for that series.  In another word, you can only have one last record which will match your current series selection.
    Thanks,
    Gordon

  • What is the role of navigation atributes in APO DP

    What is the role of navigation attributes in APO DP

    Hi,
          Navigational attributes bear the same meaning as in BW. They can be used for navigation- drill up and drill down in the planning book.  There is a very little difference in usage.
    They also appear in the CVCs, they are just like a regular characteristic. You can select the N.Attribute in your selection profiles, you can use them for forecasting as well.
    But the problem is , when you specify as a navigational attribute, additional tables are created and they have to be accessed from there instead of database like the regular key figures.  So it hampers the performance.
    It is a good idea to define the characteristics that you think would be using in planning, macros, forecasting model selections, selection profiles etc. and have the characteristics by which you want to drill up/down the data in the planning book.
    This saves a lot of performance.

  • What is the difference between "System" buttons and boolean buttons?

    I'm writing a VI with an event structure that allows me to push different buttons to control external instruments, but I found two types of buttons worked: "System" buttons and "Boolean" buttons. On the surface, the functionality seems the same: I can write the VI so that either one works, and they work in the same way, but which one is right?
    Here is a little more info on what I'm doing. I have a case structure that has one "timeout" case, which just measures the position of a movable stage. Another case, if a "system"-type button is pressed, moves the stage to an absolute position. Another case activated by a "boolean"-type button moves the stage to the zero point. I could switch these and it would still work, but I don't understand how the buttons are different.
    Also, right now I'm using the "run continuously" function so that the loop just repeats. Is this the right way to do it? I could put everything inside a loop, and make my own stop button for it. Would that be better? Worse? --> I think I found the answer to my own question: run continuously will stop and start the code at each instance, so a while loop will be better because it doesn't start and stop repeatedly. (True?)
    Thanks,
    Karl
    Message Edited by Karl T. on 03-31-2008 05:43 PM

    Karl,
    You never want to design your program to have to use the run continuously button.  It is more for debugging than anything else.  Using a while loop with your own stop button is the preferred method of doing things.
    The System, 3-D, and Classic Booleans all basically work the same.  The appearance is different.  The System buttons look like your OS buttons that you see on all your other programs.  The 3-D were introduced in LV6 and remain standard across different OS's and are not affected by System color changes or System theme changes.  The classics behave similarly to the 3-D, but they are the older controls that existed prior to LV6 and have been kept for legacy's sake.
    There are arguments for using system controls vs. 3-D controls (I don't think most people use the classic controls much anymore).  So, you really have to make a personal decision as to which you prefer to use.  NI pushes the system controls, but you'll notice there is a large number of controls which are not available in the system pallette.  I have made versions that look like system controls, but they do not automatically update for theme or system color changes.

  • What are the limitations around action buttons?

    I have been trying to publish a presenter file with 5
    different action buttons going to different custom shows from the
    same slide - but when i publish, only the first action button on
    the page is working.
    Can anyone suggest where i might be going wrong, or tell me
    if there are limitations in this area?
    thank you.

    Someone else was asking about this a while back. Presenter
    doesn't capture information about custom shows and show and return.
    It works on a linear process. For example if your custom show was
    displaying slides 5,6 and 7, when you click an action button to
    show the custom show it will jump to slide 5, but then doesn't know
    what else to show.
    You can use action buttons to move forward, backwards, go to
    a specific slide and also show hidden slides. Last viewed slide
    doesn't work.
    Probably not the answer you wanted to hear but I hope it
    helps clarify what I have found out.

  • What is the little Spider / Bug button for?

    I was at my parents house today and downloaded Safari on my Dad's Windows XP laptop. There was a button next to the address bar that looked like a "spider" or "bug"... I didn't have time to toy around with Safari and waited until I got home. Downloaded it on my Mac and the button isn't there... ???
    Anyone know what this button does, and why it isn't on the Mac version?

    As stated above, its a "Report Bug" button (You can read that by going to View - Customize Toolbar... Obviously its too hard to make tooltips for the app interface). Why it's not on Mac version? Well, probably because they expect many report bugs on Windows version.
    Or maybe they think Windows users are stupid enough not to find it in the menu.

  • What are the setting for Save button for saving plan data in WAD template

    Hi,
    i created SAVE button in Webtemplate for saving plan data.But this button is not
    active.is there any setting for this?
    thanks in advance
    chandu

    Hi Chandu,
    The settings to Configure the  Save function.
    Right click the Button Group Item ® Properties ®  * Button    ® 
    Type Caption  ‘Save’ ® Command    ® Select ‘All Commands’ Tab ® 
    De-select ‘Execute Planning Function’ and then select checkbox ‘Save
    Changed Data’ ® Double click on ‘Save Changed Data’ ® OK ® OK ® Save your template.
    *pls assign points,if info is useful*
    Regards
    CSM Reddy

  • What is the use of notes button in the Service Request field in Siebel Application?

    Hi,
    I have an doubt with the "Notes" tab in Service request field of Siebel Application.
    Can you please explain me about this tab.
    Thanks
    Thriveni

    Sometimes 255 characters is not enough and with the Notes you can add more text.
    And from a performance perspective it is better to make the Notes a seperate Tab, so it only gets retrieved when explicitly needed.

  • What Are The Iphone 4 Lock Button Dimensions?

    An odd question and I need the answer to a hundredth of a millimeter ASAP pls

    Ask Apple... This is a user to user forum. How would we know?

  • When trying to sign out of Hotmail the "back navigation button" remains green and I have to click sign out again and the same thing happens over and over and the only way to close Hotmail is to go to File and Close Frame, so what's my problem?

    When I attempt to sign out of Hot Mail by clicking "Sign Out," I get the "Sign In" instruction as I always have, however, the green Firefox navigation button remains on bright green (not going to gray) and my MSN home page will not close automatically as usual. I click on the green arrow and I get an instruction to "Sign Out" again. I click on that and get the "Sign In" again but the arrow stays green. I can repeat this countless times and never get signed out and always remaining on the MSN home page. The only way I can close is to go to File and click on Close Window and then my homepage will close and go back to desktop. I've been using Firefox for a couple of years now (IE prior to that for ten years) and have never had this problem. After using "Close Window" I go back onto my home page, from the desktop, and the navigation button is grayed out normally until I sign in again and we start the cycle over again. Have I been hacked?
    == This happened ==
    Every time Firefox opened
    == Approximately a month ago.

    I was doing a side-by-side comparison of the new and old server (we backed up the server before the reformat) and I can see that, evidently, CR XI was installed.  We have the directory C:\Program Files\Common Files\Business Objects\3.0 and all the versions match what is located in the project's bin directory.  Does this confirm that I did have XI installed and licensed at one time?
    If I purchase a more recent version, couldn't I update the reports to use the newer version?  I have all the source code.
    Thanks for your help, it is a nice sanity check for me after hours of reading forums and documentation.
    Also, just a shot in the dark, but I'm assuming it wouldn't do me any good to simply restore the aforementioned folder to my C drive?  Would that work if I registered all the dll's?
    Edited by: Eric Hollering on Dec 2, 2009 6:40 PM
    To be clear, I do have VS 2003 & 2005, and I have the source code.  I just have never used Crystal Reports in any of my .NET apps because the need wasn't there, so recompiling is not out of the question.
    Edited by: Eric Hollering on Dec 2, 2009 6:49 PM
    Also, I looked at the CrystalDecisions.CrystalReports.Engine.dll that was in the C:\Program Files\Common Files\Business Objects\3.0\Managed folder and when I right-click and view the properties, then the Version tab, in addition to the 11.0.9500.2 version number, there is a property called Product Version that has the value .NET.  Does that mean that this dll was bundled with Visual Studio?
    I also found this directory on the old server...does this tell you anything?
    C:\Program Files\Business Objects\BusinessObjects Enterprise 11
    I did see that you can still buy XI from CDW.  I have a call into them currently to check with Business Objects for any registrations from my company.
    Edited by: Eric Hollering on Dec 2, 2009 8:27 PM

  • What is the install button on the purchases page

    I bought and installed Lion(10.7.3) in August 2011 but I still see an install button on the purchases page.  Need I go through another installation process?  If not what is the purpose of this button.
    Thank you in advance.

    You no longer have a copy of the Lion installer on your Mac because it self deletes after it has been run. That allows you to download it again should you need to use it.

  • What is the "Calibrate..." button?

    In the print dialog - what is the Calibrate... button for? - it always seems to be greyed out, perhaps depends on what printer is used?

    Kevin,
    As you have discovered you cannot change the default values on a running VI.
    The best way to do what you want is to use a configuration file.  There is a set of VIs specifically designed for that purpose on the File I/O palette.  When the user presses the "calibrate" button, the values are saved to the file. When the program starts it reads the file and sets the controls to the values in the file.  You can even keep different sets for each driver, if the data is consistent enough.
    Read the detailed help files for the configuration VIs and look at the examples.  These will show you how to get started.
    Lynn

  • Create Notification Navigation Button not working in Order Objects Tab

    Hi Gurus,
    I am having an issue in Order --> Objects tab. I want to create notification for additional  technical objects for the order. When I enter the technical object details and press enter, a "Create Notification" navigation button gets activated for that line item. But when I press that button, nothing happens. On the other hand if a select multiple line items and then press "Create Notification" button at the bottom of the line items, I am able to create notifications for the selected line items.
    Can someone help me suggest what can be the problem or suggest a Note which might restore the functionality of the "Create Notification" navigation button at the line item level.
    Thanks in advance for the help.
    Best Regards
    Vikas Hali

    Vishal,
    I dont think the Notification Create Button from line item is pretty much dependent on the Customization Settings or any sap note concerning this has not been as yet brought into my notice. In my system, this is working appropriately. The problem with this which i can think of is either an authorization issue or you should raise an oss for this.
    Regards,
    Usman

  • Mandatory Fields and Navigation Buttons

    Hi
    I have a search form where I search by number, then I have the choice to update and submit the request. All fields are required for submission. The problems is that when I have empty fields I cannot use the search and navigation buttons, I tried to set Immediate to true but then the buttons would not perform their action. How can I solve this?
    Your help would be appreciated

    Hi,
    immediate works in the combination with response complete. However, because you are omitting the model update you will have to do this manually in an action method or action listener
    Frank

Maybe you are looking for