What is the meaning of dumping in oracle?

What is the meaning of dumping in oracle?
Also tell me is there any method to dump by user commands?

Hi,
Dumping is a format used for storing regular oracle data that is used for transferring data between two databases or servers or within the database i.e export/import.
For dumping user commands you can use user auditing.
http://download.oracle.com/docs/cd/B10501_01/server.920/a96524/c25audit.htm
regards
Jafar

Similar Messages

  • What is the meaning of different fields of Oracle Software e.g 11.1.0.2.0

    What is the meaning of different fields of Oracle Software e.g 11.1.0.2.0
    Please share.

    The first digit is the most general identifier. It represents a major new version of the software that contains significant new functionality.
    Database Maintenance Release Number
    The second digit represents a maintenance release level. Some new features may also be included.
    Application Server Release Number
    The third digit reflects the release level of the Oracle Application Server (OracleAS).
    Component-Specific Release Number
    The fourth digit identifies a release level specific to a component. Different components can have different numbers in this position depending upon, for example, component patch sets or interim releases.
    Platform-Specific Release Number
    The fifth digit identifies a platform-specific release. Usually this is a patch set. When different platforms require the equivalent patch set, this digit will be the same across the affected platforms.Check
    Meaning of each number in version

  • What is the meaning of the oracle service  "SERVICE=orclXDB"  ?

    Hi See below.
    What is the meaning of the oracle service "SERVICE=orclXDB" ?
    SQL> r
    1 select name,
    2 value
    3 from v$parameter
    4 where upper(name) in (
    5 'DISPATCHERS',
    6 'MAX_DISPATCHERS',
    7 'SHARED_SERVERS',
    8 'MAX_SHARED_SERVERS',
    9 'CIRCUITS',
    10 'SHARED_SERVER_SESSIONS',
    11 'LARGE_POOL_SIZE',
    12 'SESSIONS'
    13* )
    NAME VALUE
    sessions 170
    large_pool_size 0
    dispatchers (PROTOCOL=TCP) (SERVICE=orclXDB)
    shared_servers 1
    max_shared_servers
    max_dispatchers
    circuits
    shared_server_sessions
    8 rows selected.
    SQL>
    SQL> select * from v$services;
    SERVICE_ID NAME NAME_HASH NETWORK_NAME
    5 orclXDB 3468872077 orclXDB
    6 orcl 2392458149 orcl
    1 SYS$BACKGROUND 165959219
    2 SYS$USERS 3427055676
    SQL>

    Hi Siva,
    don't you remember Re: Net service name and service ? :-)

  • What is the meanning of the following ?

    hi , db 10g ,
    What is the meanning of the following :-
    1- Literals .
    2- Expressions in Sql .
    3- PL/SQL Expressions .
    4- Padded blanks .

    It is all documented.
    1 - Literal: https://web.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10759/sql_elements003.htm#sthref377
    The terms literal and constant value are synonymous and refer to a fixed data value. For example, 'JACK', 'BLUE ISLAND', and '101' are all character literals; 5001 is a numeric literal. Character literals are enclosed in single quotation marks so that Oracle can distinguish them from schema object names.
    2 -SQL Expressions: https://web.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10759/expressions001.htm
    About SQL Expressions
    An expression is a combination of one or more values, operators, and SQL functions that evaluates to a value. An expression generally assumes the datatype of its components.
    This simple expression evaluates to 4 and has datatype NUMBER (the same datatype as its components):
    2*2 
    SQL (simple) expression: https://web.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10759/expressions002.htm#sthref802
    simple_expression::=
    3 - PL/SQL expressions: https://web.stanford.edu/dept/itss/docs/oracle/10g/appdev.101/b10807/02_funds.htm#sthref211
    Expressions are constructed using operands and operators. An operand is a variable, constant, literal, or function call that contributes a value to an expression. An example of a simple arithmetic expression follows:
    -X / 2 + 3 
    Unary operators such as the negation operator (-) operate on one operand; binary operators such as the division operator (/) operate on two operands. PL/SQL has no ternary operators.
    The simplest expressions consist of a single variable, which yields a value directly. PL/SQL evaluates an expression by combining the values of the operands in ways specified by the operators. An expression always returns a single value. PL/SQL determines the datatype of this value by examining the expression and the context in which it appears.

  • What are the Meaning ...

    Hi Guys,
    In Oracle HRMS, Termination form we have the Following dates such as Actual, Final, Projected, Last Standard Process, Final Process. I an just wondering what was the meaning for those dates ( Actual, Final, Projected, Last Standard Process, Final Process)
    Waiting for the reply
    with regards
    Surya

    Actual: Last working day of employee at the company
    Last standard: The last date when Salary is paid (mainly end of month)
    Final Process:No more payment process after this date.
    Example: employee's last working day was 17.OCT.2007 ,
    Last standard date is 31.OCT.2007 (Recieved last pay check).
    Final Process 01.DEC.2007 recived pay for various expenses.
    If there is no date in Final Process date you can still enter to assignment record. After Final Process Date, assignment is blocked.

  • What's the meaning of parameter "_release_insert_threshold"?  Thanks

    what's the meaning of parameter "_release_insert_threshold"?
    And in case what, need to adjust this parameter?

    This parameter is more or less described at [http://www.orafaq.com/parms/parm1719.htm]. Parameters starting with _(underscore) are hidden parameters. We should not use these parameter unless or otherwise specified by Oracle Support. Check metalink document id 2893261.8
    Regards
    Virendra.

  • What is the meaning of UL3+?

    We want to install FMW 11g components(WLS,ADF,SOA,OIM) on RedHat EL5.
    The FMW11g certification matrix say 11g certified on Red Hat EL 5 (UL3+) on Oracle VM, minimum update level required is Red Hat EL 5 (UL3+) on Oracle VM 2.1.2+.
    What is the meaning of UL3+?
    Do we must instll oracle VM 2.1.2+ after install Red Hat EL5?
    Oracle VM2.1.2+ is free or need license?
    Thanks

    Based on context, it would be update (or update level?) ... similar in concept to Service Pack in some other OS that I don't quite remember the name of ...
    OracleVM is optional, but it would be installed BEFORE Red Hat (or Oracle Enteprise Linux - whch has the same release numbers)
    OracleVM (OVM), like Oracle Enterprise Linux (OEL) is GPL and is licensed for no fee. And like OEL, OVM allows you to purchase support for an annual fee. (Note that even 'Free' software has a license.)

  • What is the meaning of the black line in the Layer 2 View?

    In the layer 2 View,there are many black line indicate "Ethernet 100M",what is the meaning?Does it mean the device is an end device that connected PC only?

    Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
    If anyone else in the forum has some advice, please reply to this thread.
    Thank you for posting.

  • MM - PO - what is the meaning of this button?

    Dear friends,
    Could anybody help me with one question.
    There is a strange button in a Purchasing Order on the Account Assignment tab page on this screenshot (it is marked with red color).
    Screenshot below
    http://content.foto.mail.ru/mail/raiden87/81/i-84.jpg
    What is the meaning of this button? When it is used for?
    I hope that anybody knows the meaning =)

    hi raiden,
    as for as i have gone through the issue I have come to know that:
    If you want to use multiple account assignment for a line item in PO then at that moment you will have to first press the "repeat on " button. only after that multiple account button will be active that is just before your "repeat on " button.
    Steps:
    1:Save your PO.
    2:Go to transaction code ME22N to change the PO.
    (Here you will firstly see that the multiple a/c assignment button is firsty gray.It will become active only after when you press the "repeat on" button).
    I hope It will be helpfull for you.
    regards,
    Aslam Ansari.

  • So I have an iPad with the smart cover, and it's usually supposed to turn on the iPad when u open it, but it's no doing that for me. Nor is it turning off without pressing the button. What is the meaning of this?

    So I have an iPad with the smart cover, and it's usually supposed to turn on and off the iPad when u open it and close it, but it's not turning on for me. Nor is it turning off without pressing the button. What is the meaning of this?what caused it to be this way? Is there someway that I could fix it?

    Wait a sec did this just start?
    You set up the smart cover function in settings (you did that, right?) so, if you did that and it's failed you make an appointment at your nearest Genius Bar now.

  • What are the UI components used in oracle adf?

    what are the UI components used in oracle adf?

    Web.:
    - ADF Faces and Trinidad JSF components
    http://docs.oracle.com/cd/E28280_01/apirefs.1111/e12419/toc.htm
    Desktop:
    - MS Excel
    http://www.oracle.com/technetwork/developer-tools/adf/overview/index-085534.html
    Mobile
    - AMX UI Components for Android and iOS
    Frank

  • What is the meaning of this column in the pricing  procedure?

    Dear Gurus,
    What is the meaning of this column in the pricing procedure?
    thanks..

    subtotal field : Subtotal field is used to pass the value to some other field in PO .
    for ex: using value 9 you pass the value to field komp-brtwr. so that this can be used in  any other routine in the pricing procedure.
    requirement field: if there is a scenario that condition type should come in pricing on some condition like vendor country is india. in that case use create the requirment and attached this requirement.in this requirment you put logic and set the sy-subrc value 4 or 0.

  • What is the meaning of e system- jvm:infop=25a84f41,a='7.1.0.746',0='9.50.0.80',h=e000f03

    what is the meaning of e system- jvm:infop=25a84f41,a='7.1.0.746',0='9.50.0.80',h=e000f03 when i press alt+L+G+L+G on my bb 9220 i have that situation,but when i press alt+L+G+L+G on the other device i come different situation.what i must to do?

    deepspace wrote:
    i2b converts form int tot byte.
    If you don't use this instruction, the int will probably simply be chopped off at 1 byte.
    The casting does this:
    Narrowing Conversions: when an integer type is cast to another integer type of a smaller n number of bits, all but the n lowest-order bits, will be truncated.
    Yes, if instructions that yields integer results, such as iload_<n>*, are not proceeded with an i2b* instruction then the bastore* instruction, for example, would truncate the 32bit word into 8bits. But what option is there anyway? Maybe not proceeding an instruction, such as iload_<n>*, with i2b* will cause the bastore* instruction to forcibly compress a 32bit word into an 8bit byte?
    Please, if you would look at the output of the programs, that I discussed earlier in this post, you would notice the results are exactly the same, regardless to if the iload_<n>* instruction is proceeded with i2b* or not; it is analogous to the NOP*, No Operation, instruction used by microprocessors; however, conversely, the i2bmnemonic implies it actually performs a function. This is why I was questioning the pragmatic* reasoning behind it's usage. I just want to understand what is happening!
    I have posted this question to 3 different developer sites, including java.sun.com/j2se forums, and HAVE YET to get a DEFINITIVE* answer. All I get is the obvious answer but that is my problem, isn't it OBVIOUS* that 32bits must be truncated to 8bits to fit into a byte? I could understand if i2* transformed the 32bit word in some way but as evidence by the programs I posted earlier this is not the case. The values I passed to thoses methods ranged from -255 to 255, inclusive!!! Should I use values ranging from java.lang.Integer.*MIN_VALUE* to java.lang.Integer.*MAX_VALUE*, inclusive, instead?
    h4.
    Please read the posting and look at the output and you will understand my conundrum
    -----

  • What is the meaning of "i" in apple products?

    what is the meaning of "i" in apple products? i means "my" or any other answers?
    iOS means iphone Operating System
    so , iphone means my phone , internet phone or any other meanings?
    Can any one please clear my doubt?
    Thank you.

    http://www.quora.com/What-is-the-history-of-the-i-prefix-in-Apple-product-names
    Cheers
    Pete

  • What are the steps involved in configuring Oracle EBSR12 after installation

    What are the steps involved in configuring Oracle EBS R12 after installation is complete?
    We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
    Please direct me to the documents that can be followed to do initial steps for the application functionality to work.
    Thanks,
    SR

    What are the steps involved in configuring Oracle EBS R12 after installation is complete?
    We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
    Please direct me to the documents that can be followed to do initial steps for the application functionality to work.All Oracle EBS Docs 11i/R12 can be found at:
    Oracle Applications Documentation
    http://www.oracle.com/technetwork/documentation/applications-167706.html
    Thanks,
    Hussein

Maybe you are looking for

  • Epson Stylus CX5400 - Epson Scan error dialog won't go away using OS10.4.3

    I have 2 user accounts set up (both Admin) and, after setting up my printer and installing the epson software, I get an error dialog for the 2nd account that says, "Epson Scan cannot be started...". There's a Yes and No button to open the troubleshoo

  • How do I add files to third party apps?

    Hey guys, I recently updated iTunes to 12.1. I needed to add some pdf files to my iPad for a class. In previous versions of iTunes, I would just click the app tab and there would be a section for Adobe Reader/Acrobat where I could click and drag the

  • How to send a request to Apple?

    Would someone please point me in the right direction to send and/or make a request to Apple. In particular, I would like to make a request to have Graphics card/energy saver selection for my MBP. It was a selection in Leopard, but not in SL. I could

  • ISE Captive Portal & redundancy

    I have a guest SSID configured in my WLC. I also have 2 ISE appliances (Primary/Secondary) that I use to do the web auth on my guest SSID. In the config of my SSID (Security / Layer 3 / Web Policy), I selected "Web Auth Type: External" and I had to e

  • Upgrading to SQL 2005 from 2000?

    I have a very large database in 2000 and I'm thinking of requesting that it be moved to 2005. I've heard that 2005 is faster and I've seen the interface for it and it looks like it combines Query analyzer with the standard interface tools. Enterprise