What is the premiere sequence preset for canon vixia hf r400?

I'm new to the world of editing. I shot a project on a Canon Vixia HF R400 with all the factory presets. Is the correct Premiere preset sequence AVCHD 1080i30 (60i)?
Thanks!

Yes that is the correct sequence setting.
Get Started with Premiere Pro
New to Premiere Pro? Get started with your first project — editing a video. In less than an hour, you'll learn to edit together different types of media to tell a video story.

Similar Messages

Best Sequence Preset for Canon HG 10?

Hi guys, i have a Cannon HG10, but i am confused on which Sequence Preset to choose when starting a new project.
My settings for the Cannon are 1920x1080, 15mbps, PF25 (frame rate), 1080i
I want to choose the best settings possible for the best quality
also once my video is edited what are the best export settings for me?
i'm so confused
thanks for the the help

I you have no idea what to choose drag a file from the Project Window into the New Item Icon. That will setup the correct sequence.
On the whole it would be AVCHD 1080i50 non anamorfic.

What are the best sequence settings for anamorphic?

sorry for the long explanation....
i have a project that was shot 16:9. my question is what is the best sequence setting to use so that when i export it to tape it will look right on a regular TV? on the FCP viewer it looks right with either setting. the difference is that if i choose a regular sequence setting ("anamorphic" unchecked), the video clips need to be rendered (it's green, but it will limit my ability to add effects and watch them without rendering). therefore i would prefer to use the anamorphic setting that does not need rendering. However, when i export the movie it comes out stretched (and only works with TV that has an anamorphic setting).
Can i edit the whole project with the anamorphic sequence setting and in the end copy it to a regular sequence without it becoming stretched?
i tried this on a little test sequence and it appeared to work, but i'm afraid that if the project becomes elaborate... well, last time i tried editing an anamorphic sequence (a while back, on FCP 2) i had to redo my whole film cut by cut with a regular sequence setting and then render it anamorphic so that it will look right.... it simply didn't work to just cut and paste the project onto a new regular sequence (could this have happened because i had many effects?). it came out stretched as it would when you merely uncheck the "anamorphic" box. has this been solved in the newer versions?

Your settings -- between the Compressor, Pixel Aspect Ratio and Frame Size -- are oil-and-water.
If this is going to YouTube (meaning not going to be viewed on traditional TVs) and it's mainly Photos, try using this:
Frame Size: 1280x720
Aspect Ratio: HDTV 720p
Pixel Aspect Ratio: Square
Editing Timebase: 29.97
Compressor: Motion JPEG A
Quality: 100% (though in a lot of cases, you could drag this down to about 75-80% and quality will not suffer)
Unfortunately, you won't get much (if any) real-time effects. Unless, of course, you're on FCP 6 or later, where you can use a ProRes compressor instead. But with your signature saying 10.4. something, I wasn't sure if it was safe to assume that. The Motion-JPEG setting should work in all versions.

How to view what I am recording on my pc - Canon Vixia HF R400

Hello. I purchased the Canon Vixia HF R400 to record arts & crafts tutorials that will be uploading on YouTube. I would like to be able use my pc as my screen, as opposed to the the 3.0" LCD Screen on the camcorder. Is it possible to connect the camera to my PC with some interface software or equipment?
This is all very new to me and I greatly appreciate any help provided.

this is some MAJOR BS..HUH?..It's 2015 and she cant plug her camera in to her computer? I see Canon Adertises LIVE STREAMING through the wifi....How does she stream video live to the computer? or on the HFr50 with wifi if hers doesnt have wifi DOES CAMERA ACCESS HAVE A PC APP OR is there better options for this SOFTWARE????...Does the HFr50 do what she wants??HE SAID WHILE RECORDING. Cant she view what the camera is veiwing like a webcam through the USB? veiw and record into some capture software? and not record on the camera at all?? How do you get the camera to be recognized as a working video capture device to use it as a webcam??? I was doing this in the over 10 years ago with a consumer sony camcorder.

What are the best sequence presets and settings to use in FCE for the best resolution with the least amount on strain on computer?

Hello!
Can someone please help me figure out the best settings to use in order to obtain the best resolution in FCE4 for a television show that is going to be sent out on full size Sony DVcam tapes, with 4:3 aspect ration and audio output at 48kHz? I am currently working with mixed media sources in Final Cut Express, and I am wondering what the best settings (presets and preferences) are, in order to provide the HIGHEST resolution possible, while putting the least amount of strain on my computer system?
I am importing mini DV-standard definition footage and still photos (from Canon Rebel camera, HD CMOS Canon camcorder that records in 1440x1080 at 48 kHz, and cell phone photos). For voiceovers I use the tools in FCE.
I use Voltaic (which I use thanks to recommendations from Apple discussion boards, love it!) to convert the footage from the HD CMOS-Canon HD VIXIA (HG 20) camera, and then I am using print to video to output onto Sony DVcam tapes (full size). This is for delivery for a television network that broadcasts in Standard Definition, so I need to produce the highest resolution and best quality possible that also puts the least amount of stress on my computer system.
If anyone has any recommendations, help, or sources that can help me answer this question I would be greatly appreciative.
Thank you!
Susan Kayne

This is happening because your video clip properties do not match your sequence settings. This is always a problem when you try to insert video from multiple camcorders/cameras (that use different video codecs, frame sizes & rates) in a single sequence.
It will help a lot if you provide more specifics - what FCE easy setup did you use to create your sequence? For your DV footage, are you using standard 4:3 DV or anamorphic 16:9 DV clips?
If you plan to export to standard def (DV/DVCAM) and are mixing DV from a miniDV camcorder, stills, cell phone images and AVCHD then I would suggest that you use the DV NTSC easy setup for your sequence. Use MPEG Streamclip or similar utility to convert your non-DV video (your AVCHD video) to QuickTime/Apple DV-DVCPRO NTSC. Then all your video will match your sequence settings. Yes, you will have to crop the AVCHD footage to 4:3 and you can do that in MPEG Streamclip.

What is the correct sequence preset to choose?

Now a days I shoot AVCHD but I have video from years past that is from several different
Video cameras, on my hard drive, just waiting until I get around to editing it. How do I
determine which of those many presets that are available to choose from, that are offered when you
start a new project, is the right one?
I seem to remember someone telling me once that if you just hit the "OK" button without selecting anything, the software will assign the
correct preset to the project. I don't know if that is correct or not.

Steven L. Gotz wrote:
Actually, the preset no longer really matters much.
No matter what the preset, if you import 1920X1080 video and drop it on the "New" button, it will create the proper sequence for your video.
Yes, but it's called the "New Item" button.
You could also right click on a clip and "Create New Sequence From Clip"
You could also select the clip and choose File > New > New Sequence From Clip
You could also create any sequence, and edit the clip to that sequence and conform the sequence to the clip settings in the dialog box, as shown.
There's always a number of ways to get from A to B in Premiere Pro.

What are the best sequence settings for a movie to be put on youtube?

I am making a video that consists of mainly jpegs and audio. The final movie needs to be crisp and fairly high resolution because the pictures have some house plans that need to be easily read.
I have tried the following settings only to get a blurry image result in the end:
Frame Size: 960x720 Aspect Ratio: HD (960x720) (16:9)
Pixel Aspect Ratio: NTSC - CCIR 601 DV 720X480
Editing Timebase: 29.97
Quicktime Video Settings:
Compressor DVCPRO50 - NTSC
Quality: 100%
This seems to me like it should be a crisp enough image result but the end result is very poor. When I use the H.264 Compressor instead of DVCPRO50 - NTSC, the image is much sharper but the faded transitions are sometimes choppy, and you have to render the timeline with each change you make. Please help me find the best overall settings for smooth editing and sharper image.
Thanks,
Caleb

Your settings -- between the Compressor, Pixel Aspect Ratio and Frame Size -- are oil-and-water.
If this is going to YouTube (meaning not going to be viewed on traditional TVs) and it's mainly Photos, try using this:
Frame Size: 1280x720
Aspect Ratio: HDTV 720p
Pixel Aspect Ratio: Square
Editing Timebase: 29.97
Compressor: Motion JPEG A
Quality: 100% (though in a lot of cases, you could drag this down to about 75-80% and quality will not suffer)
Unfortunately, you won't get much (if any) real-time effects. Unless, of course, you're on FCP 6 or later, where you can use a ProRes compressor instead. But with your signature saying 10.4. something, I wasn't sure if it was safe to assume that. The Motion-JPEG setting should work in all versions.

What are the best sequence settings for editing a movie made on your iPhone

I have a lot of footage taken on my iPhone 3Gs. I want to make a summer fun movie and compile all the clips together. What are going to be my best sequence settings to make editing of the footage easy and viewable in real time without the need to render. Is this possible?

Open the videos in QT Pro player and export to a codec and frame rate consistent with any easy set up such as NTSC DV and edit that.

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

FCE HD Easy Setup for Canon Vixia HFS21?

Dear ones, I have FCE HD v 3.5.1 installed on Powerbook G4 Mac OSX 10.4.11
Is FCE HD v 3.5.1 compatible with Canon HD Vixia HFS21?
If so, what is the appropriate Easy Setup for Canon HD Vixia HFS21? Thxs kindly!
Do I need an Intel based laptop to use this Canon Vixia HD HFS21? I believe my Powerbook G4 is not Intel based! Or is it?
Thanks kindly!
Nestor

Bad news:
I'm pretty sure this Canon shoots AVCHD video for which you need both FCE4 and an Intel Mac to edit. (Your G4 was the next-to-last of the Motorola processors before Apple switched to Intel chips.)

I am trying to determine the new project preset for multi-camera video shot as follows: 3 Canon camcorders, main shot is DV (tape) (720x480), b-roll is DVD (mini-disk) (720x480), additional b-roll is AVCHD (1920x1080). Film is from a wedding, DV contain

I am trying to determine the new project preset for a multi-camera video shot as follows: 3 Canon camcorders,
Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception.
Film is from a wedding, DV contains main footage so I assume it will need to be the base. I am planning to use the preset for DV-Widescreen. Is there a better option? I'm concerned about playback as the three appear to have different PAR. I'm using Premiere Elements 10 on W8.
Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
(And no I won't be doing this again for a wedding that I shoot.)

VDRAVES
Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
Before
After
It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
And, after the Scale increase, you can always click on the screen and move the image around a bit
(without overdoing it to get black borders again).
After and an adjust
Please let us know if you are OK with the information above.
Thank you.
ATR

What is the best photo paper for the Canon MX860?

What is the best photo paper for the canon mx860? I have the Hammermil photo copy paper but I don't think that that's the right paper for the printer
Solved!
Go to Solution.

Hello Kolourl3lind,
The following Canon photo papers are recommended for use with the PIXMA MX860:
Photo Paper Pro Platinum <PT-101>
Photo Paper Pro II <PR-201>
Glossy Photo Paper "Everyday Use" <GP-501>
Photo Paper Glossy <GP-502>
Photo Paper Plus Glossy II <PP-201>
Photo Paper Plus Semi-gloss <SG-201>
Matte Photo Paper <MP-101>
High Resolution Paper <HR-101N>
T-Shirt Transfers <TR-301>
Photo Stickers <PS-101>
These photo papers, as well as other accessories for the printer, can be purchased online at the Canon eStore here:
http://shop.usa.canon.com/shop/en/catalog/accessories/pixma-mx860-wireless
Hope this helps!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

What is the boot sequence for an 2911 Router

What is the boot sequence for an 2911 Router. How long does it take to boot up from power being turned till it is passing traffic.

The default boot sequence should be as follows:
1) POST
2) BOOT-STRAP (locates the IOS)
3) IOS
4) Starup Config

What is the SAFEST SEQUENCE to convert from a Outlook/iPad/iPhone synced with MobileMe to syncing with iCloud (I have 10 years of calendar diary events and 3000 contacts) - I am worried about the data issues that have been posted about iCloud.

What is the SAFEST SEQUENCE to convert from a Outlook/iPad/iPhone synced with MobileMe to syncing with iCloud (I have 10 years of calendar diary events and 3000 contacts) - I am worried about the data issues that have been posted about iCloud.
This has worked fine with MobileMe with only a couple of minor glitches in the past.
Any experience doing this the "right" way?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

What are the best export settings for video with small text?

I am making videos of lectures (where slides show up next to a small video of a person talking). I would like the text to show up as legibly as possible, all while maintaining a small file size (smallest possible) and still maintaining quality. What would you recommend? The slides change every couple minutes or so, but I don't wnat to reduce the frame rate becuase I do have that small video in the corner. Which settings and format are best? Also, I'll be uploading this to Youtube.
THANKS!

Keep in mind that the small video in the corner does not require as high a data rate as a full screen video. So, if a full screen video requires, let's say 5Mb/s for a talking head, you might be able to get away with 2Mb/s or less for the entire frame with a little video and a lot of static slide. Also remember that the less motion in the video, the lower the bit rate can be.
Try it out.
Use the H.264 preset for YouTube at the same frame size as what you are editing, and then reduce the data rate to half normal. Export and check out the quality. Then halve it again and check the quality. Keep going until the quality is unacceptable then go up a little. Find your sweet spot.
It is subjective. You have to decide the lowest bit rate you personally can accept and still be confident that the client will be OK with it.

What is the premiere sequence preset for canon vixia hf r400?

Similar Messages

Maybe you are looking for