What is the similar subevent in multiloadaction as startmapproces(urgent)

Hi
i want to know the subevent for multiload action event just like startmap process for import action.
updating worktable code works fine for single period load with startmap process i am trying to use the same code with aftimporttext in multiload action but it does not work so i would like to know what would be the similar event for this in multiload.
please help
Thanks

Hi
I've just replied to your other post about creating and running a debug script. From the API guide only you have picked the logical option, others could be BefValidate again in the MultiLoadAction as the API guide implies that this runs before the BefProcLogicGrp and BefProcMap events.
As I say in your other post it is worthwhile running the debug script to see exactly what event order you see in your environment and then use that to pinpoint where you need action. Try to step through it a bit at a time so check-in, review, import, review etc.. at each step if you can check the underlying data table to see at what point the action you are looking to change has happened.
It is an iterative process and can take some time, but if it helps you get it right....
Hope this helps
Stuart

Similar Messages

What is the similar tool on HP-UX like MMC?

Hello guru,
I see there is a SAP monitor tool MMC on windows platform, we can start SAP and stop SAP there, we can also see red, yellow, green there indicting SAP system status.
Is there similar tool on Unix platform? I am using HP-UX 11iV2

Hi,
Please check this note
877795 Problems w/ sapstartsrv as of Release 7.00 & 6.40 patch 169
Thanks,
Tanuj

What's the error in this snippet? very urgent!

import java.io.*;
import java.net.*;
public class HttpClient {
     private String msg =null;
     private int gsm =0;
     private DataOutputStream out = null;
     private Socket HttpSocket = null;
     private String message = new String("Hello Socket");
     public HttpClient(String msg,int gsm) {
          this.msg = msg;
          this.gsm = gsm;
     try {
          HttpSocket = new Socket("127.0.0.1",3333);
          out = new DataOutputStream(HttpSocket.getOutputStream());
     } catch(UnknownHostException e) {
          System.out.println("Don't know about host:127.0.0.1");
          System.exit(1);
     } catch(IOException e) {
          System.out.println("Couldn't get I/o connection for 127.0.0.1");
          System.exit(1);
out.writeChars(message);
out.close();
HttpSocket.close();
/*When i compile the following errors are detected:
C:\Work\sms\HttpClient.java:29: <identifier> expected
out.writeChars(message);
^
C:\Work\sms\HttpClient.java:30: <identifier> expected
out.close();
^
C:\Work\sms\HttpClient.java:31: <identifier> expected
HttpSocket.close();
^

Its just some declaration errors...
just do as follow:
    public HttpClient(String msg,int gsm)
        this.msg = msg;
        this.gsm = gsm;
        try
            HttpSocket = new Socket("127.0.0.1",3333);
            out = new DataOutputStream(HttpSocket.getOutputStream());
            // guess you shall change this with out.writeChars(msg)
            out.writeChars(message);
            out.close();
            HttpSocket.close();
        catch(UnknownHostException e)
            System.out.println("Don't know about host:127.0.0.1");
            System.exit(1);
        catch(IOException e)
            System.out.println("Couldn't get I/o connection for 127.0.0.1");
            System.exit(1);
    }good luck!

What is the utility similar to Launchclient Utility of websphere in WebAs

hello friends,
we have this launchclient utility in websphere which is a an application client provided by the websphere app server.
what is the similar client utility in SAP web as, has any one got any idea

Hi,
Is this tool reponsible for the WebSphere startup?
Can you please explain a littlebit more?

What is the difference between JDK & SDK?

What is the difference between JDK & SDK?
its urgent.
thanks

The first letter. That's it.
The J stands for Java, the S stands for Software.
JDK is the old name for the SDK.

Illustrator keeps quitting-notice others have had similar issues, not resolved-so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help-come on-someon

Illustrator keeps quitting…notice others have had similar issues…so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help…come on…someone has to have an answer…HELP Pleeeeease

<moved from Adobe Creative Cloud to Illustrator>
reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

What is the best way update similar OID and OAM LDAP attributes via OIM?

Our environment uses OIM provisioning to an OID LDAP which is used by OAM.
For legacy purposes, we need to populate both the Oracle "orcl*" attributes and OAM "ob*" in cases where they have the same or similar usage.
Example: When a user is disabled in OIM we need to set orclisenabled="false" and obUserAccountControl="DEACTIVATED" in OID
What is the best way to accomplish this in OIM? My initial thought was to write a custom adapter, similar to the out-of-the-box OID Modify User adapter, which supports modifying multiple attributes.
Is there a better way?

You can create two tasks which will modify two attributes of OID.
On Disable user task, call task1 and on Success of task1, call Task2 (using Task to Generate Feature).
You can make use of OOTB connector only.

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible or something similar. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible access denied. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Apple has really crappy NTFS read-only that does not always work. And it is probably a licensing issue.
Paragon Software is constantly being updated and supported with their NTFS for Mac OS X - they also have an HFS+ driver for Windows that works - Apple's HFS+ read-only driver for Boot Camp / Windows does not.
I keep seeing problems and lack of support for MacFUSE, that could change.
http://www.bing.com/search?q=ntfs+for+mac

What is the command similar to ied (HPUX) on Solaris

I was using ied (interactive editor) to store previous commands on HPUX. Is there a similar utility on Solaris?
Rgds
Haraprasad

Hi Haraprasad,
If you use ksh on Solaris and use option -o vi ($ksh -o vi), this will provide you the similar functionality. You can recall or search the previous command using key sequence "ESC k" or "ESC /<command>".
Hope this helps.
Thanks,
--Raj

When using the analog inputs and analog outputs of the PCI-7344, what is the conversion between the voltage entering the card to counts? Similarly, what is the conversion between counts to voltage at the output of the card?

I am using the PCI-7344 to control my system. The analog inputs are connected to the output of my system while the analog outputs serve as feedback to the system. The system is a servo. I want to know what is the conversion between the voltage read at the input, to card counts, and finally to the voltage output to the system.

Carole,
If you are trying to do analog feedback with a servo motor, Chapter 14 of the manual talks about how to set up the torque feedback. Also linked below is a LabVIEW example of analog feedback.
Chapter 14
NI-Motion User Manual
Automatic Analog Feedback with FlexMotion example
A. Talley
National Instruments

What's the diff. between Sound Blaster Audigy MB Audio and the similar but ADVANCED ca

I just bought a Dell Inspiron 53 with?the?former card, but whenever I search for more info about it, I can only find the "Advanced" version. Please, can you tell me, what's the difference between the two cards?Also,? as I was building the PC, Dell offered only two other?audio options, and this was the middle one; none of the other choices was ideal. This appears to be a bottom-of-the-barrel card, so can anyone recommend?a replacement?card for under $40-$00 that wouldproduce very high quality music for my new 5. wireless Dell speakers?Much obliged.

I've been fiddling around in the Device Manager and it has Other Devices and under it is Multimedia Audio Controller, I can choose to either reinstall the driver udate the driver, disable it, or uninstall it. Here's what comes up on properties
This device is not configured correctly. (Code )
To reinstall the drivers for this device, click Reinstall Driver.
Help would be appreciated here. I'm a big gamer and would like to have this up and running before our first CAL Match.

Newbie: what is the equivalent of passing request parameters?

Hi-
I am new to JSF. I have read many tutorials and articles. I still don't get one concept about passing parameters. Note: I don't want to store stuff in the session unless I have to.
Let's say I have a page with a list of users. I layout the page with a panelGrid. Each row of the table has the first and last name of the user. If a user clicks on the name of a user on the user list, it should go to the user profile page. The backing bean for the user list page will be the UserListBean. It has a method called getUsers() that returns a List of User objects.
For the View User page, I have a ViewUserBean. The ViewUserBean retrieve the entire profile for that user.
How do I pass the user ID to the ViewUserBean? In struts, I would pass it as a request parameter (I would manually write the link URL with the userID). I know I can use the request like that in JSF, but that seems ugly. I looked at the code of the J2EE bookstore tutorial and it does a funky thing with all sorts of data stored in the session.
What is the best way to request a page and "pass in" a userID?
Thanks for your help.
Adam

I have a case on my current project very similar to your case. What you want, very simply, is an easy way to allow faces to handle URLs like http://www.domain.com/showUserDetails?userId=50
The natural trouble is that when loading the page, there is no action to use to prefetch the User object based on the Request Parameters in JSF.
All the solutions above either rely on the session or they are exceedingly complex. This case is actually very easy to do and is very straight forward using Managed Properties and a Request Scope bean...
Here is the rather straight forward solution I used...
First, make a "ShowUserDetailsBean" which represents the "logic" for this page.
public class ShowUserDetailsBean
    /** Will point to the actual user service after dependency injection*/
    private UserService userService;
    /** Will hold the userId from the HTTP Request Parameters*/
    private String userId;
    /** Will hold a lazy loaded copy of the User object matching userId*/
    private User user;
    public void setUserService(UserService userService) {
        this.userService = userService; //dependecy injection
    public void setUserId(String userId) {
       this.userId = userId; //dependency injection
    /** Lazy loads the User object matching the UserId */
    public User getUser() {
        //Trap the case where the URL has no userId
        if (userId == null) return null;
        if (user == null) {
            user = userService.getUser(userId); //Lazy Load
        return user;
}Next, configure the managed properties in faces-config.xml
<faces-config xmlns="http://java.sun.com/JSF/Configuration">
<managed-bean>
    <managed-bean-name>userService</managed-bean-name>
    <managed-bean-class>foo.UserServiceImpl</managed-bean-class>
    <managed-bean-scope>application</managed-bean-scope>
</managed-bean>
<managed-bean>
    <managed-bean-name>showUserDetails</managed-bean-name>
    <managed-bean-class>foo.ShowUserDetailsBean</managed-bean-class>
    <managed-bean-scope>request</managed-bean-scope>
    <managed-property>
      <property-name>userService</property-name>
      <property-class>foo.UserService</property-class>
      <value>#{userService}</value>
    </managed-property>
    <managed-property>
      <property-name>userId</property-name>
      <property-class>java.lang.String</property-class>
      <value>#{param.userId}</value>
    </managed-property>
</managed-bean>Finally, you just make your webpage as you normally would...
<h:outputText value="#{showUserDetails.user.userId}"/>
<h:outputText value="#{showUserDetails.user.firstName}"/>
<h:outputText value="#{showUserDetails.user.lastName}"/>
Now you're ready to test, so you visit the page
http://www.domain.com/showUserDetails?userId=50
And your user details with userId=50 appears!
It's just that simple!
Regards,
Doug
Caveat: I haven't added any sample logic to handle cases where you visit:
http://www.domain.com/showUserDetails
without specifying a userId. I suggest you add some basic logic to your page to handle this case more gracefully.

What is the diffrence btween IDOC and BDOC?

what is the diffrence btween IDOC and BDOC?

Hi,
In short Idoc is an Intermediate Document and Bdoc is an Business Document.
Data can Be Transferd from Sap to Non Sap using Idoc where as we can transfer
data between sap to sap in Bdoc.
IDoc
IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions
BDOC
BDoc is a business document which is technically similar to an IDoc. BDocs are used to communicate data between two systems.
BDocs come in two types. One is the message BDoc (MBDoc) and the second is the Synchronizing BDoc (SBDoc).
MBDoc is used for replicating the data between SAP CRM and SAP R/3
SBDoc is used for replication and realignment between SAP CRM and mobile clients
som times SAP will be integrated with som other third party systems
ex SAP with BAAN here we should comunicate one to other systems
here we can integrate using EDI technology in this the formate of data will be in I DOCS EX :EDI is a bridge between 2 systems .I doc is a container to transfer data from one sys to other
this Idocs we can use in ALE technology also
BDoc is called Business Document,
BDoc represents data in a structural format. This sturctural architecture is use to either input data to system or send data to other system.
BDocs are data carrier that can either collected in system(Inbound) or can be send out of system(Outbound)
Please refer following link:
http://help.sap.com/saphelp_crm40sr1/helpdata/en/ec/8d7e3a7e760b55e10000000a114084/content.htm
Thanks,
Medha.

What is the use of Alternative Calculation Type =2 and 4

Dear Friends
In pricing procedure in gross value, Net value for Item and Net value has Alternative calucation type is 2.
What is the use of it?
Without using it these value line are also fetching net value then what is the work of it. Please give me detail information with its effects in pricing condition tab page in sales document.
Thanking You
Arun

Arun biswal,
Correct Biswal. We have at varoius stages within Pricing procedure the "net value" which is calculated. Not only the alternative calculation type "2" is used if you notice carefully they are stored as subtotals at various levels.
For Ex Gross Value --> Subtotal =1 --> Calc type = 2
similarly for Net value for Item --> Subtotal =2 --> Calc type = 2
Net value 2 --> Subtotal =3 --> Calc type = 2
See, these are used to calculate the net value at various levels in pricing. The calculation Type has got a set of routines that will facilitate us in pricing. SAP has provided certain clauclated formulas or routines to facilitate us during calculation within pricing . Here the "2" is used for calculation without tax and store it as subtotal and display it or use it for further calculations.
We can use this "netvalue" amount for further calculations. It is used for clarity purpose when you issue a statement to customer. (like Confirmation order) at various levels like discount amt involved, Freight involved, Rebate amount invloved.....
Even without this Calc type or using sub total u can proceed....
Finally we have TOTAL --> Subtotal =A --> Calc type = 4
In the above line we have Calc type as 4, which means when you use TAX this calc type is used .
Routines are used to facilitate your process....
Regards
Sathya

What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff"
O.o
A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
Here is a summarized history of my relationship with Wine:
Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
Third, you will need to get MacPorts and configure it. The tutorial should have this data.
When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
After obtaining wine, to run a program, open the terminal.app window.
cd desktop/XYZ/ZYZ\ WRQ
The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
wine th11e.exe
Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

What is the similar subevent in multiloadaction as startmapproces(urgent)

Similar Messages

Maybe you are looking for