What is the sku for Onplus service Renewal?

                   Hi All,
I've tried to find the sku needed to renew a service 1 to 3 years after the standard 3 years of service link to an Onplus device.
Do you you have any clue, as on my side i didn't find anything that helps to answer the question :
What can be sold to a customer after an Onplus service has expired, to renew for 3 more years the service for the device ?
Thanks for your help
Best regards
David Falaise

Hi David,
We have not yet created a sku for renewal after the initial 3 year subscription expiration.  We still have more than 18 months before any one should need to renew.  The renewal cost after 3 years will be $50 per year though.
Kind Regards,
Lisa

Similar Messages

  • What are the settings for automatic service PO?

    What are the settings for automatic service PO?

    Hello,
    I would like to know if it is possible to automatically create the PR for services. It would be similar to MD04 but instead of being for stockable materials, it would be done for non-stockable materials (services in this case).
    PR would be generated monthly, because this services have to be paid every month, for example electricity, water, rent, phone bills.
    I hope you can help me, thank you!

  • What is the address for Canon service center in Irvine?

    I like to bring my Canon 40D in fir service what is the address for Irvine sevice center?

    This is where I mailed gear for service.  I'm assuming it is the same address for walk-ins
    15955 Alton Parkway
    Irvine, CA 92618

  • What is the url for sap services?

    hi
    i need url for  sap services to search in market place for oss notes

    Hi , pls chk this.
    OSS notes describe bugs/issues/problems in SAP software, provide the technical details and correction instructions.
    Notes also sometimes cover 'features' (ie things that are not bugs) that cause ambiguous application behavior. Additionally, specific information relevant to releases, SAP strategy (eg when is support to a particular version going to end) regarding its products and so on is also provided via notes.
    You have a search portal for SAP Notes which will tell you more about it.
    You would a S-user id to logon to the OSS Notes. The S-user id is basically based on the installation number of your SAP system. You can get the user id from your BASIS. Once you get this then logon to this link:
    http://service.sap.com/notes.
    Check this:Re: oss
    Also check this document. It has the step by step procedures with screenshots to apply a Note.
    http://www.sappoint.com/basis/snote.pdf
    first you should have oss id then you can see oss note here
    https://service.sap.com/notes
    take a look thread
    oss
    oss note is a document provided by SAP that described particular issue, usually with symptom, cause(the reason), solution provided, and some other info (correction instruction and code).
    oss note has version, date issued, and categorized to application area (e.g BW, CRM, etc).
    in practice, when error occured, normally there will be error number and message, that can be used to search oss note which in return may provide possible solutioon. some problem will have short dump, and in the dump, there is suggestion to search oss note with using keywords specified(program name, module name, etc.)
    cheers,

  • What is the number for Verizon Wireless  Corporate Customer Service Complaint for CA

    My Complaint:  I have been a Verizon Wireless customer for approx 20 years.  I called customer service to seek an early upgrade for my daughter's phone. She is away in college and her phone is malfunctioning.  She is eligible for an upgrade in approx 6 weeks so I did not want to spend the money on a replacement phone when since we were planning on updating to something newer.  The customer service rep to me they could not do the early upgrade an to call back in a few weeks. After explaining this was unacceptable (I do not like the idea of a young female being out of state and away from home with no reliable means of communication), she places me on hold to later return with the only offer of  I must purchase a new device through her ( over the phone) which will be shipped to me, the phone was priced $100.00 more than the online price (they will not price match), plus i must pay $30.00 upgrade fee, $35.00 activation fee and taxes on the retail price of the phone.  I am upset and disappointed with the quality of service provided by Verizon being a 20 year customer.  If not for the seriousness and urgency of this matter, i would not have asked for an early upgrade.  It is times such as these that you get to see how much of a "valued customer" you really are.   I guess you are valued as long as you pay your bill and continually  purchase their products.  I would like to speak with someone from Verizon's corporate or customer relations department.  As of now I am really considering changing my service to a different provider.  I have multiple accounts with Verizon and i will canx each after the current contract committment expire (starting with my daughter's phone which expires in 6 weeks) In the meantime I will go purchase her a new phone with someone else and take comfort knowing she will have reliable communication.

    I started with them in 1985. It has been wonderful service but very expensive. They seem to operate on day of deposit day of withdrawal. That means that I have no benefits nothing beyond the normal customer if I don't pay my bill they shut me off. That's why I have switch to another provider and I have better service lower cost and better phones. you can't beat  other providers I mean it. Please don't expect more from verizon other than a "pay me more money and I'll do what you want" because it's all about money. Read the transcripts from current Verizon employees all over the internet. The company is going down and they're taking customers with them.
    msvat <[email protected]> wrote:
    msvat  created the discussion
    "What is the number for Verizon Wireless  Corporate Customer Service Complaint for CA"
    To view the discussion, visit: https://community.verizonwireless.com/message/1113982#1113982
    >

  • Outlook 2007 doesn't show icloud service running.  Does anyone know what the dll for this service is so it can be manually added to outlook?

    Outlook 2007 doesn't show the icloud service running in Windows 7 within outlook.  Does anyone know what the dll for this service is so it can be manually added to outlook?   I've installed the icloud control panel app and set it up to synch everything, but after initially downloading my icloud calendar, it won't process any calendar updates (new entries made on either iphone 4 on ios 5 or outlook). 
    So since the control panel installed, but the service doesn't show running in outlooks "trust center" add-ins list, anyone know the actual dll file it would point to so I can see if I can add it the hard way?

    I had the same issue and figured it out.  First you have to start Outook as administrator.  To do this, shift and right-click on outlook and click run as administrator.  Next you need to enable Hard-disabled add-ins:
    Hard-Disabled Add-Ins
    Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event handler in your add-in is executing.
    To re-enable an add-in
    In the application, click the File tab. 
    Click the ApplicationName Options button.
    In the categories pane, click Add-ins.
    In the details pane, verify that the add-in appears in the Disabled Application Add-ins list.  The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
    In the Manage box, click Disabled Items, and then click Go.
    Select the add-in and click Enable.
    Click Close.
    Then you need to activate it. 
    To re-enable an add-in
    In the application, click the File tab.
    Click the ApplicationName Options button.
    In the categories pane, click Add-ins.
    In the details pane, verify that the add-in appears in the Inactive Application Add-ins list.  The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
    In the Manage box, click COM Add-ins, and then click Go.
    In the COM Add-Ins dialog box, select the check box next to the disabled add-in.
    Click OK.

  • What is the best online storage service for time machine

    what is the best online storage service for time machine?

    ds store wrote:
    There isn't any, the reason is TimeMachine is a backup of your entire boot drive, can be many gigabytes in size which Internet Service Providers only provide a fraction of upload speed compared to download speed so it makes online backups rather impractical for most.
    You can share some files via a service like DropBox between remote computers, but to backup your whole system it's better to have it stored locally.
    After all how can you restore your hard drive if OS X isn't running to get online?
    https://discussions.apple.com/docs/DOC-3045
    Why is local storage better than offsite? I had a house that burned down and can tell you from experience that local backup was totally useless.

  • What is the procedure for creataing a portal service

    Hi All
    an any one tell, What is the procedure for creataing a portal service inorder to establish a connection to Netweaver from Java.
    Regds
    Phanikumar

    Hi,
    I dont understand exactly your use case -- "connection to NetWeaver from java -- but a portal service is simply a portal application that contains a single java class that inherits from IService.
    The NWDS has a wizard for creating a new portal object, and one type of object is a service. The wizard in this case creates a public interface and a private implementation of your service.
    For more information, see http://help.sap.com/saphelp_nw04/helpdata/en/df/e6b74253ffda11e10000000a155106/frameset.htm.
    Hope this helps.
    Daniel

  • Different tax codes in the MIRO for single service item

    Dear all,
    Customer wants to enter 2 different tax codes in the MIRO for single service item. How it can be achieved?

    >
    Milosavljevic Sreten wrote:
    > Just loudly thinking... what can be reason that one service for same invoice is taxable with two different tax codes? 
    >
    It is cross-counties transportation. Part of route outside company country is non-taxable, inside part is taxable. Amounts are proportional to distance and hence become known only at time of invoice receipt.
    Users do not want to create 2 separate invoices. They would like to have ability to enter 2 lines in MIRO. But I need your help to understand, how it can be done? Service receipt is done by single line (because actual taxable / non-taxable amount is unknown at that time). So, is it possible to enter non-taxable amount in MIRO in some additional line?

  • HT1688 Can you please help me. I purchased the new Apple I 4s phone from AT&T. I bought it out right. NO CONTRACT!! I paid almost $1000.00 for it. I then, had it enrolled it in my company's  ATT service plan. They paid the bill for my service. Since, I ha

    Can you please help me. I purchased the new Apple I 4s phone from AT&amp;T. I bought it out right. NO CONTRACT!! I paid almost $1000.00 for it. I then, had it enrolled it in my company's  ATT service plan. They paid the bill for my service. Since, I have left the company. I have retained, and assumed financial responsibility for the phone, and the phone number with AT&amp;T. The same day I assumed ifinancial responsibility, I had the phone number ported to a new service provider. ( Straight Talk ) After doing so, my phone worked fine. (as far as cellular service) NO DATA Service !!!! I have been on the phone with AT&amp;T, Straight Talk, and Apple, FOR HOURS over TWO days!!! Trying  to get this problem resolved. All I need to do, is change my APN settings (access point name ) settings. Its  my phone!!! Why does any body have this APN menu locked from me??? I've been on the phone for two days between, AT&amp;T, Straight Talk, and Apple products technical support teams. Everybody points the finger at the next guy!! What can I do to get the phone, that I paid for, work  for more than just a phone, and a paper weigh?
    PLEASE HELP ME!!!!!
    Jason
    Sent from my iPhone
    <Email Edited by Host>

    Wow... you seriously over paid for an iPhone.
    That probably explains why you have/had no clue you were purchasing a locked device and think it's an Apple problem to get it unlocked.

  • What are the settings for apn data and mms for iphone 4 on straight talk?

    what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

    They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
    Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
    You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
    It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
    Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

  • What are the announcements for renting VPS?

    What are the announcements for renting VPS? For details, understand VPS and make the choice of rental; for Taiwan VPS and Hong Kong VPS, without records, unlimited contents, wider range, and more efficient experience. Your server will show its excellence with the advantages.
    Most station agents become less inclined to virtual hosting, for national space, domain name records are needed, which waste the time; for overseas hosting such as Korea hosting, US hosting, no records, but slower speed than national space; therefore, more and more station agents prefer servers, but because the price of servers are too high, they turn their focus on VPS.
    The following are the announcements:
    1.Open remote desktop lander:
    Start-run-mstsc or start-procedure-nearby-remote desktop connect
    2.Several conditions for account halt:
    First, client side login cause account halt
    Second, certain account quits the remote control in midway when it runs routine
    Third, certain routine is restricted by synchronous operation of system administrator.
    3. Not install the third party firewall
    If you need firewall, please use windows firewall, the third party firewall in VPS will cause system collapse and data loss, the system automatically obtains the newest windows patches and install itself, which do not require human operation. Installing system patches in VPS sometimes will heavily lead to VPS collapse and data loss.
    Do not modify remote desktop port.
    Because of the specialty of VPS system, default remote desktop port is 3389, do not modify randomly, or the remote connection will be out of work.
    4. Except some special conditions that user registration is needed for certain procedure, when the remote connection has been close down, do not forget logout user to save memory resource, and prevent the loading connection next time, if it happens, reboot VPS.
    5. VPS has been set with relative security when it was paid, with high security. It suggests that do not open firewall randomly, if you open it by your own, the following ports should be opened: 21(FTP), 3389(remote connection), 80(website http), 3306(MySQL), 1433(SQL Server). Timely check whether there is suspicious account or system log, download 360 safety guard to avoid these files and process.
    6. Try not to modify registry hand-actuated, ensure the reboot of VPS. Modify remote ports please add the modified port in firewall first, and then reboot.
    7.Modify IIS installation files, backup these files, and then modify them with the software that can keep the file layout, prevent these files from destroying IIS.
    8.Website service of VPS and FTP service of IIS are default to open hand-actuated, set Web Publishing Service as automatically if you are station agent. If you often use FTP service of IIS, please set FTP Publishing Service as automatically, i.e. reboot it automatically. If you use serv-u, tick all the system service terms. In the terms of security and resource consumption , it suggests that those users who seldom use FTP do not set it as automatically.

    Hi there
    "So for ALL the apps, the annual monthly fee is £46.88, but you can rent occasionally for £70.32 pm.... ?" Correct
    £17.58 single app plan requires an annual commit - it's £27.34 for the month-to-month plan without annual commit.
    Thanks
    Bev

  • Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration?

    Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration? Do we have any Instructions/steps?

    Migration from WCS 7.0 to PI 1.2 can be  performed. If the customer wants to migrate data you need to first upgrade to  NCS 1.1.1  You can download NCS 1.1.1 from Cisco.com if you have a valid service  contract.
    For the migration step involving NCS an evaluation license is  sufficient.  You can obtain an NCS evaluation license from http://www.cisco.com/go/license >  Get Demo > Network Mgmt Products > Cisco Prime NCS Evaluation License.  
    Instructions for migrating data from WCS 7.0 to NCS 1.1.1 are available in  NCS 1.1.1 Release Notes.  Do not upgrade to NCS 1.1.2 as this release is not  upgradeable to Prime Infrastructure 1.2.  If you are ordering a Cisco Prime  physical appliance (PRIME-NCS-APL-K9) be sure to select the NCS 1.1 image which  you can later upgrade to Prime Infrastructure 1.2 after you have migrated your  WCS data.
    There is a post in the support forum which can be refered.
    https://supportforums.cisco.com/docs/DOC-26972

  • What are the prerequisite for getting MTTR / MTBR data.

    Dear SAP Experts,
    I want to know what are the prerequisite for getting MTTR / MTBR data.
    Regards
    ERP Tech

    Pre-requisites are:
    Maintain Start date in Equipment / Functional location master
    Maintain the Malfunction Start date & time, Malfunction End Date & time in Notification
    Maintain the Breakdown tick mark in notification
    Maintain update group (stats) in Notification type configuration (IMG - Plant Maintenance & Customer Service - Maintenance & Service Processing - Maintenance & Service Notifications - Notification types - Define Notification types)

  • What is the location for the swatches file in the illustrator product part of Adobe Creative Suite 3 Design Premium for windows (date and lenght)? File that manges its funcionallity.  Thanks

    As per adobe agent chat representative, the following question is posted on the fórum to obtain an answe from adobe.
    What is the location for the swatches file in the illustrator product part of Adobe Creative Suite 3 Design Premium for windows (date and lenght)? File that manges its funcionallity.
    Thanks
    <moved from downloading,installing,setting up - kglad>

    Illustrator is not working as it should...
    I want them to compare the original size and date of creation with what I have installed on my computer... I have installed several times with my original CD and I tried once downloading the files from the adobe site (using my own license). I suspect the files has been modified or renamed on my laptop by an external unauthorized user causing the malfunction of the application. 
    Customer services does not support CS3 anymore and the updates / patches in the adobe site does not solve the problem... They redirect me to the forums for support...
    Presently, my problem is that after creating a swatch and drag it to the swatch panel, it does not fill as it should a new form... Now, after deactivating and activating my license the swatch seems to fill the new form but when the filter that the swatch has is persistence in the next filling object created even though a different color is being used as a fill (X)... Help in the creation of a swatch over the internet just complicate the issue.
    That's why I would like to know whether updates on my product are being received or files are being replaced without my knowledge...
    Thanks...
    PS Do you know how to contact a staff adobe employer on the forums?

Maybe you are looking for

  • Handling anything gets extremely slow after some time

    I'm having a strange issue with CS5. Without any apparent reason, the file I am editting becomes very slow with simple actions. For example, moving a (random) object around. Using the arrow keys, it takes every move about a second to complete... ther

  • Fix background image within div

    Hello I've done a lot of research about this, and tons os answers have come up, still, none solved my problem so far. I'm trying to make the background image within a div to be fixed when i scroll vertically. Have a template made, in which the only e

  • I need something fixed this is a Java Servlet with Wireless Multicasting

    I need help I can't get this thing debugged! Its a HTTP Servlet very standard but I can't get it to work import java.connection; import javax.servlet.http.HttpSession; // You need to import the java.sql package to use JDBC import java.sql.*; public c

  • Help BC Webform custom date Field

    I have a BC webform which I have decided to use a custom field as the date field, because BC Date picker is buggy for users. This is my webform: <form name="catwebformform72193" method="post" onsubmit="return checkWholeForm72193(this)" enctype="multi

  • Appending DS with a standard field from another DS

    Hi     I am appending a standard field( 0catcode_ud) from QM datasource to 2LIS_03_BF.Hence i created a ZZcatcode_ud field and appended to the MC03BFO Structure.Got to write an exit code to populate the zzcatcode field in BF datasource.Now my query i