What is the use of Fragmentation Content

Hi All,
I need some clarifiration on Fragmentation content on OBIEE RPD side, for what purpose we can use these fragmentation in OBIEE.

Hi Deva,
Thanks for You are Quick Response...
Actually in my project we have total 9 tables are there in these 9 tables 3 were FACT tables remaining are the Dimensional Tables.
For each day we are getting around 7 to 8 lacks data into our DB.
When ever client to see or to pull one month data its taking around 9 to 10 mins , but for pulling one day or one week its taking less then 20 sec only .
So for improving response time what are the steps i need to follow, could you please guide me.
For each Fact and each Dimensional tables i'm using single logical source only and am not using multiple logical sources .In each fact table for 10 or 15 colums am using sum function only, at max am doing sum claculations for 20 columns in both fact tables..
why its taking time to show results ..is there any way to reduce these response time..
Culd you pls suggest me..we are working on OBIEE 10.1.3.4

Similar Messages

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT GIVE DETAILS

Hi,
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
From a technical point of view, the SAP delivery version (D version) is matched with the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
Example of an automatic match
Additional customer-specific attributes have been added to an InfoObject in the A version. In the D version, two additional attributes have been delivered by SAP that do not contain the customer-specific attributes. In order to be able to use the additional attributes, the delivery version has to be installed from Business Content again. At the same time, the customer-specific attributes are to be retained. In this case, you have to set the indicator (X) in the checkbox. After installing the Business Content, the additional attributes are available and the customer-specific enhancements have been retained automatically. However, if you have not checked the match field, the customer-specific enhancements in the A version are lost.
Example of a manual match
An InfoObject has a different text in the A version than in the D version. In this case the two versions have to be matched manually. When Business Content is installed, a details screen appears which asks you to specify whether the text should be transferred from the active version or from the D version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if
¡        the match indicator is not set and
¡        the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
In the context menu, two options are available:
                            a.      Merge All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Match.
                            b.      Copy All Below
The Match indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy. If the Install indicator is also set, these objects are copied from the delivery version to the active version.
The most important properties which are taken into account when versions are matched are now listed.
When referring to InfoObjects it is important to differentiate between:
§         Characteristics
§         Time characteristics
§         Key figures and
§         Units
Valid for All InfoObjects Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        Texts
·        Description
If texts/descriptions in the delivery version do not yet exist in the active version, they are transferred.
·        Attribute only (flag)
·        Short and long text (description)
·        Time dependency of attributes
·        Transfer routine
Valid for Characteristics
Properties Matched Automatically:
Properties Matched Manually:
·        Compounding
New InfoObjects are included in compounding
·        Referenced characteristic
Reference characteristics are transferred automatically. A warning is issued.
·        Attributes / navigation attributes
New attributes are included.
If an attribute is added by the customer, the settings for this attribute are transferred (for example, F4 sequence).
·        Application components
If the entry for the active version is initial, the delivery version is used.
·        BEx display
·        Characteristic constants
·        Default member
·        Authorizations (flag and field)
·        Selection (CHASEL)
·        InfoObject is document attribute
·        Data type
·        Length
·        Output length
·        Conversion routines
·        Lower case allowed (flag)
·        Contains master data (flag)
·        Master data is authorization relevant (flag)
·        Export DataSource (Flag)
·        F4 query design
·        F4 query runtime
·        Check ODS object
·        Contains text tables (flag)
·        Texts are language-dependent (flag)
·        Short, medium and long texts exist (each with flag)
·        Default currency
·        GIS attribute
·        Hierarchies exist (flag)
Valid for Key Figures
Properties Matched Automatically:
Properties Matched Manually:
·        Type of key figure
·        Fixed unit
·        Fixed currency
·        Aggregation
·        Exception aggregation
Valid for Units
Properties Matched Automatically:
Properties Matched Manually:
·        See the table above (Valid for Characteristics), if these properties are also relevant for the units.
When referring to InfoProviders it is important to differentiate between:
¡        MultiProviders
¡        InfoCubes
¡        ODS Objects and
¡        InfoObjects
InfoObjects are discussed above (see the first table Valid for All Objects Named Above).
Valid for All InfoProviders Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoObjects
If InfoObjects in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for MultiProviders
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoProviders
If InfoProviders in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for InfoCubes
Properties Matched Automatically:
Properties Matched Manually:
·        New dimensions
If dimensions in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
With the InfoObject catalog object type, InfoObjects that are assigned to a catalog in the delivery version are transferred to the active version automatically. Manual matching is not necessary.
With the transfer rule object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional attributes) are added automatically when the match is performed. Manual matching is not necessary.
With the process chain object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional objects in the process chain) are added automatically when the match is performed. Manual matching is not necessary.
·        Active Version Available
In this column, the following display options are available:
¡        : The object is available in an active version. You decide whether you want to retain this version or reinstall the latest version of the object.
¡        Date symbol: The object is already available in an active version. However, the active version belongs to an older Content release. SAP recommends that you install the latest version.
¡        Gray symbol: An activated version of the object is available in the system. However, the object status is inactive. If an object version is activated, this indicates that all metadata for the object can be created successfully. The inactive object status indicates that the processed object is inconsistent and cannot currently be used for processing data. Transfer the object again from the SAP delivery version (D version). If this is not enough to change the object status from inactive to active the object has to be postprocessed. You find notes on postprocessing in the activation log.
Postprocessing: An inactive object status may also occur for an InfoObject if changes are made to the structure at field level. Postprocessing the object involves converting the relevant tables in accordance with the activation log.
¡        No indicator: The object is not available in an active version.
7. Make Settings in the Selection List and Install.
Make the required settings in the Install selection list:
Installation Type
Installation Type
Information
Simulate installation
The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (and not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
Install
The selected objects are installed immediately.
Install in background
The selected objects are installed in the background.
Install and transport
The selected objects are installed immediately and then written to a transport request.
SAP recommends you use the Install in background option because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time to complete. Make sure that when you install objects in the background that the versions are not matched. It is always the delivery versions that are installed. These are not matched with any available customer versions.
Refer
Business Content (Versions)
http://help.sap.com/saphelp_nw04/helpdata/en/c1/ea683cc5e8ca68e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Thanks,
JituK

What is the use of Withholding tax identification number field?

Hello SAP Experts,
I posted this question earlier but had to close because of no replies from anybody. Posting it again to see if I am lucky to get some answer this time.
Can someone tell what is the use of field Withholding Tax Identification Number? Does it help with the reporting? Where does it get populated on the report if given at vendor or master record or within the withholding tax customization for company code? What is the difference between creating it in the customization for withholding tax information for company code and vendor/customer master record?
As per SAP: Withholding tax identification number
This is a number issued by the tax authorities per withholding tax type.
This number must be specified in Customizing either:
(a) As part of the withholding tax information defined for the company code, or
(b) As part of the withholding tax information defined in the customer or vendor master record.

Hi Pete,
The only thing that I could check is the content used in US:
See content of this field for US:
LFA1-STCD1 Social security number
LFA1-STCD2 Employer identification number
LFBW-WT_WTSTCD Withholding tax identification number for WT Type
In order to populate it, please kindly check the following:
The reason why you cannot fill in the field WT_WTSTCD in transaction
Fk02 however you can do it in XK02 (Change vendor centrally) can be due
to wrong customizing of the field status group.
Kindly check the following:
SPRO->
Finantial accounting -> Accounts receivable and accounts payable ->
Define screen layout per activity (vendors) -> Change Vendor(Accounting)
Company code data -> W/holding tax data, w/h tax 2 ->
FIELD Withholding tax code,w/h tax 2 will be probably just available to
display. Please, change it to optional entry.
I hope I could be of assistance.
Kind Regards,
Fernando Evangelista

What is the use of access level

Hi Experts,
What is the access level and what is use of each option in access level
1 Application
2 Superior component
3. Top Component
4. Sap
5. Global
and in Details section what is the use Properties tab
1. Application Component
2. Software Component
3. Development Package
4. Settings Class
Please explain Each option use.
Thank you in advance,
Srini M.

Hi Srini,
just read the documentation (although the current status on SAP Help Portal isn't really up-to-date):
1. [Entry point|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cc/85414842c8470bb19b53038c4b5259/frameset.htm]
2. [Setting an Access Level|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/32/6aba9c49fd41a5a14f710e121220f1/content.htm]
W/r to "Application Component" etc., docu on Help Portal is definitely not sufficient. Here, the following applies:
An application offers attributes for the application component and the software component. The application component and software component have to be the same as defined for the development package. Application and software component are automatically derived from the development package if they are not set explicitly.
For the definition of the development package, application component, and software component, we recommend that you choose the same values that are in effect for the software solution that you want to enhance by a new BRFplus application. This simplifies all activities related to the software infrastructure, especially transports.
CU
Claus

What are the uses of portal

Hi,
Iam new to Enterprise portal.
Can anybody tel me what are the uses of portal
correct me if iam wrong " EP can be used from anywhere where the internet conncetion is available and anybody who is authorised to view the content"
Thanks in advance
SAI

Hi,
Your statement is correct. To be crisp, the portal offers a single point of access to SAP and non-SAP information sources, enterprise applications, information repositories, databases and services in and outside your organizationall integrated into a single user experience. It provides you the tools to manage this knowledge, to analyze and interrelate it, and to share and collaborate on the basis of it.
With its role-based content, and personalization features, the portal enables usersfrom employees and customers to partners and suppliersto focus exclusively on data relevant to daily decision-making processes
To read more visit,
http://help.sap.com/saphelp_nw04/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
Regards
Srinivasan T

What are the uses of MVC, Extension and how to create it for begineers pls

what are the uses of MVC, Extension and how to create it for begineers pls
dont give link for tutorials please explain ,
thank you,
Regards,
Jagrut BahratKumar Shukla

Hi,
Check out this link :
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm</a>
It is the best possible explanation and documentation that you'll get.
Thanks,
Tatvagna.

What are the uses of diffrent concepts in data warehousing

What are the uses of diffrent concepts in data warehousing? Why?
naveen

Hi,
Your statement is correct. To be crisp, the portal offers a single point of access to SAP and non-SAP information sources, enterprise applications, information repositories, databases and services in and outside your organizationall integrated into a single user experience. It provides you the tools to manage this knowledge, to analyze and interrelate it, and to share and collaborate on the basis of it.
With its role-based content, and personalization features, the portal enables usersfrom employees and customers to partners and suppliersto focus exclusively on data relevant to daily decision-making processes
To read more visit,
http://help.sap.com/saphelp_nw04/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
Regards
Srinivasan T

What is the use of additional file(s) in sender file adapter?

Hi experts,
what is the use of additional files parameter in sender file adapter?
give me some example.......
Thanks & Regards
E.Ravi Chandra Reddy

Hi,
please check the below link,
you can specify additional files to be included in the XI message as attachments.
http://help.sap.com/saphelp_tm90/helpdata/en/44/692ab8a4b633eae10000000a1553f6/content.htm
Regards

What is the use of planning package in bps

hi friends,
what is the use of planning package in bps .
Thanking u
suneel.

Hi Suneel,
Check the info here:
http://help.sap.com/saphelp_nw04/helpdata/en/0e/8007dc83d011d3b72e0000e82debc6/content.htm
Hope this helps...

What is the use of MAIN WINDOW in SCRIPTS

what is the use of MAIN WINDOW in SCRIPTS, y we con't create a script w/o main window.
Title was edited by:
Alvaro Tejada Galindo

Hi
See this
What are the different types of windows in SAP Scripts?
Windows are defined in the Layout sets which define the position and the text to displayed.
The different types of windows are:
MAIN - Main Window
The main window is a continous window which can extend over several pages. If the text in the main window fills up a page, a new page is created.
Only one main window can be defined in the SAP Script whereas upto 100 instances of main window can be created in a page.
VAR - Variable Window
This window can have the variable contents displayed on them. The contents of the window cannot exceed the window size. The content can be formatted for each page.
CONST - Constant Window
The constant window can have a fixed content and is formatted only once.
Main Windows (MAIN)
Each form must have one window of type MAIN. Such a window is called the main window of the form. For SAPscript forms, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the form. The SAPscript composer thus avoids reformatting of the text after each page break.
Variable Windows (VAR)
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different form pages.
Constant Windows (CONST)
Starting with Release 4.0, the system internally processes windows of type CONST similar to windows of type VAR. Therefore, if you create a new window, always use type VAR.
<REMOVED BY MODERATOR>
Anji
Message was edited by:
Alvaro Tejada Galindo

What is the use of personalization tab in user creation?

what is the use of personalization tab in user creation

Hello Kumar,
Check these links for this
http://help.sap.com/saphelp_nw04s/helpdata/en/07/5430fbdb39fb4d9abb56754e039d0d/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/ab/e70538389511d5974400a0c930dcc1/content.htm
Award points if helpful,
Regards,
Raju.

What is the use of "end of selection" event in report

Hi all
As we can display the outputs in the "start-of-selection "using the write statement.
Then what is the use of "end-of-selection" in reports.
Please tell me with some real tiem examples.
God points will be rewarded.
Thanks

Hi,
The END-OF-SELECTION event is triggered in type executable programs once the logical database has finished reading all data and before the list processor is started.
It tells the server that all the database reading is completed and no further reading is going to take place..
For more details go through the following link:
http://help.sap.com/saphelp_me21sp2/helpdata/en/9f/db9aca35c111d1829f0000e829fbfe/content.htm
END-OF-SELECTION is used mostly when you are using Logical data base in your report. It is triggered when all selection get finished from the data base.
You can use write statments in start of selection and end of selection also.
But the one use of end of selection is... if you want to stop the processing of a certain code and directly display some message you can use this.
start-of-selection.
select data..
process data
if no data .
stop.
endif.
write data
end-of-selection.
write : 'No data to display.
Stop command will take the control to end of selection event.
thanks,
mahesh
Message was edited by:
I Can Solve It

What is the use of jsp when compare with Struts

what is the use of jsp when compare with Struts

JSP Tag Libraries are great for reusable content formatting and ligic.
For example, let's say you have this Shopping site. Each item you sell is stored in a database, and you get them out depending on Catagories, creating a List of ItemBeans. You allways want to display the items with a catagory header, then a <table> with the item number, the description and the price.
Instead of creating a bunch of logic in the JSP that does this, you can pass it on to a Tag that might look like this in your JSP:
<shopping:itemTable catagory="${selectedCatagory}" items="${itemsForCatagory}" />
This would make the JSP easier to read and work with.
The actual uses are incredible. Have you used the <jsp:useBean ...> tag? That is an example of a use of the Custom Tag Libraries.
Furthermore, look into JSTL (JSP Standard Tag Libraries). They are a collection of tags (API by Sun, coding by Apache) used to do many of the standard actions you might want/need to do in JSPs, like a conditional tag (c:if only do something if the test is true), multiple-conditional tags (c:choos c:when c:otherwise) like an if [else if] else construct. Looping through an array or Collection (c:forEach), storeing values in scopes (c:set) formating numbers and dates (the fmt library), xml transformations (xml library), and lots of other things that you could replace scriptlet code with.

What is the use of keyword SCAN ABAP-SOURCE

Hello experts,
what is the use of scan abap-source. please explain. what is tokens, statements, levels in that.

Hi
SCAN
This statement is for internal use only.
It cannot be used in application programs.
SCAN ABAP-SOURCE itab1 ...TOKENS INTO itab2
 ...STATEMENTS INTO itab3.
Parts marked with " ..." are interchangeable
Addition 1
... FROM n1
Addition 2
... TO n2
Breaks down the source code table itab1 into tokens not from start to finish, but only from line n1 to line n2.
The additions FROM n1 and TO n2 must, in this order, follow the specification of the source code table itab1.
When using the start specification n1, use the addition WITHOUT TRMAC to ensure that there are no unnecessary database accesses to the table TRMAC.
The end specification n2 is treated as "soft", i.e. a statement that begins on a line <= n2, but ends only on a line > n2, is returned completely.
If the end specification n2 is split in a chain statement, only the split part up to the next comma is returned completely, not the entire chain statement up to the next period.
Negative line specifications are not allowed and result in a runtime error.
A line specification of 0 amounts essentially to no specification.
If n1 number of lines in source code table, the scanner is not called (SY-SUBRC = 2).
If n1 > n2 and n2 > 0, the scanner is not called (SY-SUBRC = 2).

Addition 3
... KEYWORDS FROM itab4
Does not return all statements, only those specified in the key word table itab4.
If the key word table is empty (i.e. it contains 0 lines), all the statements are selected.
The lines of the key word table are treated as a character field.
To select a Native-SQL-statement or a macro definition, you can specify the pseudo key words EXEC_SQL or DEFINE_MACRO. It makes no difference whether the statements EXEC or DEFINE occur as well. Native SQL statements and macro definitions are returned as one statement (of type E or M even if the expansion of a macro definition results in more than one statement.
If the key word table contains a blank line, blank statements are also selected.
Addition 4
... LEVELS INTO itab5
Stores details about each edited source code unit (source code table itab1 itself, expanded include-programs, expanded macro definitions) in the level table itab5.
Specification of a level table makes sense only with the addition WITH INCLUDES.
The level table itab5 must have the structure SLEVEL.
The fields of the structure SLEVEL - and consequently the columns of the level table itab5 have the following meaning:
TYPE
Type of source code unit with the following possible values:
P (Program)
D (Internal DEFINE macro)
R (Macro from table TRMAC)
NAME
Name of source code unit (name of include program, macro name)
DEPTH
Current nesting depth of source code unit (>= 1)
LEVEL
Index of superior (i.e. including or calling) source code unit in the level table (>= 1, if DEPTH >= 2, otherwise 0)
STMNT
Index of superior (i.e. including or calling) statement in the statement table (>= 1, if DEPTH >= 2, otherwise 0)
FROM
Index of first statement of source code unit in the statement table (>= 1)
TO
Index of last statement of source code unit in the statement table (>= 1)
If the source code unit contains include programs or macro calls, the line range [ FROM, TO] in the statement table also covers the statements in subordinate source code units.
Addition 5
... STRUCTURES INTO itab6
Details of the construction of the source text table are given in the structure table itab6.
The structure table itab6 must have the structure SSTRUC.
The fields in SSTRUC (which are also the columns of structure table itab6) have the following meanings:
TYPE
Type of the structure with possible values:
P (Beginning of the source code)
R (Subroutine)
M (Macro, EXEC SQL)
I (Loop)
A (Case distinction)
C (Condition in a case distinction)
J (Goto command)
D (Structured declaration)
E (Event)
S (Follow-on from simple structured statement)
STMNT_TYPE
The statement type of the beginning of the structure. The values are listed in the type pool SCAN in structure SCAN_STRUC_STMNT_TYPE.
KEY_START
Flags whether the start of the structure is described semantically ('X' if there is a special statement, otherwise ' ').
KEY_END
Flags whether the end of the structure is described semantically ('X' if there is a special statement, otherwise blank).
STMNT_FROM
Index of the first statement of the structure in the statement table itab3.
STMNT_TO
Index of the last statement of the structure in the statement table itab3.
Index of the first substructure of the structure in structure table itab6.
STRUC_TO
Index of the last substructure of the structure in structure table itab6.
BACK
Index of the structure in the structure table itab6 that contains the structure as a substructure (0 if the structure is the root structure of a structure tree).
Addition 6
... OVERFLOW INTO c1
The addition is only allowed and required if the token table itab2 has the structure STOKEN or STOKEX.
If a token is too large to be stored in the token table in the field STR, it is placed in the overflow area c1. The offset of the token in the overflow area then lies in the token table in the field OFF1.
Addition 7
... WITH ANALYSIS
Breaks down each token t = a+b(c) according to the logic of the RSYN key word >ANALY into its three components a, b and c.
Offset and length of components a, b and c are stored in the fields LEN1, OFF2, LEN2, OFF3, and LEN3 in the token table. (The offset of OFF1 is always 0 and therefore not required.)
If you specify the addition WITH ANALYSIS, the token table itab2 must have the structure STOKESX, so that the fields LEN1, OFF2, LEN2, OFF3 and LEN3 are available.
If the token table has the structure STOKEX, you must consider the following:
If the whole token exists in the token table, the offset specifications are relative to the token start. If the token is in the overflow area c1, the offset specifications are relative to the start of the overflow area.
Addition 8
... WITH COMMENTS
Returns comments also, with each individual comment representing a token. The system additionally stores entries for each full block of comments in the table itab3, differentiating between comments that occur within statements and those that occur at program level. In itab3, an entry for a comment within a statement always comes before the statement containing the comment.
Example
Look at the following program fragment. The preceding numbers are the indexes of the tokens.
1 * An example *
2 * with scattered comments
6 MOVE
3 * Inserted comment 1
7 X
4 * Inserted comment 2
8 TO
9 Y
5 * Inserted comment 3
SCAN then enters the following values for the components TYPE, FROM and TO (in this order from left to right) into itab3.
'P' 1 2
'S' 3 5
'K' 6 9
If the addition ... WITH COMMENTS is used, the table itab2 must have the line type STOKES or STOKESX.
Addition 9
... WITH INCLUDES
Also breaks down subordinate source code units (included programs, called macros) into tokens.
You should normally combine the addition WITH INCLUDES with the addition LEVELS INTO itab5.
If (at least) one included program does not exist, SY-SUBRC is set to 1 and the relevant INCLUDE statement is flagged in the statement table itab3 by the statement type J (instead of I), but the breakdown process continues. The level table itab5 contains no entry for include-programs that do not exist.
If you combine WITH INCLUDES with WITHOUT TRMAC , TRMAC-Macros are not expanded because the system does not recognize them as subordinate source code units.
When macro calls are expanded, no position specifications are available. The corresponding fields in the token table itab2 and the statement table itab3 are then set to 0.
Addition 10
... WITH TYPE-POOLS
This addition has the same effect as the WITH INCLUDES addition, except that with the former include programs belonging to type groups are broken down into tokens.
Addition 11
.. WITH LIST TOKENIZATION
Tokens of the form (a1, a2, a3) are not returned as tokens but broken down into the elementary components.
Addition 12
... WITHOUT TRMAC
If a statement begins neither with an ABAP/4 key word nor with a DEFINE macro, the system does not check whether this is a TRMAC macro, but assumes an unknown statement. (Unknown statements are flagged in the statement table itab3 with a U in the field TYPE.)
To avoid unnecessary database accesses to the table TRMAC, you should use the addition WITHOUT TRMAC whenever you assume that the source code to be scanned contains unknown statements. Unknown statements are particularly likely to occur if you use the addition FROM n1, because the scanner does not start at the beginning of the source code, but from a specified point.
If you use WITHOUT TRMAC with WITH INCLUDES, TRMAC macros are not expanded because the system does not recognize them as subordinate source code units.
Addition 13
... PROGRAM FROM c2
Addition 14
... INCLUDE INTO c3
Addition 15
... MESSAGE INTO c4
Addition 16
... WORD INTO c5
Addition 17
... LINE INTO n3
Addition 18
... OFFSET INTO n4
The above additions have the same meaning as those for the
SYNTAX-CHECK: statement: c2 is an input field for a program name to be assigned to the source code, while the fields c3, c4, c5, n3 and n4 are output fields in case an error occurs.
To be able to analyze errors without modifying programs, use the additions INCLUDE, MESSAGE, WORD, LINE and OFFSET. These provide information about the errors which have occurred.
Variant 2
SCAN AND CHECK ABAP-SOURCE itab1 ...RESULT INTO itab2.
Parts marked with " ..." are interchangeable
Extras:
1. ... PROGRAM FROM c1 2. ... INCLUDE INTO c2
3. ... MESSAGE INTO c3
4. ... WORD INTO c4
5. ... LINE INTO n1
6. ... OFFSET INTO n2
The syntax of the program in table itab1 is checked. During the check, all of the information from the program, such as statement structures, statements, tokens, data objects, types and do on are placed into the result field. This field must have the type SYSCH_RESULT, which is defined in type group SYSCH. You must therefore declare type group SYSCH in your ABAP-program using a TYPE-POOLS statement.
&ABAP_ADDITION _1&
... PROGRAM FROM c1
&ABAP_ADDITION _2&
... INCLUDE INTO c1
&ABAP_ADDITION _3&
... MESSAGE INTO c3
&ABAP_ADDITION _4&
... WORD INTO c4
&ABAP_ADDITION _5&
... LINE INTO n1
&ABAP_ADDITION _6&
... OFFSET INTO n2
The above additions have the same effect as the corresponding additions in the statement SYNTAX-CHECK: c1 is an input field for a program name to be assigned to the source code, the fields c2, c3, c4, n1 and n2 are output fields, used when errors occur.
To enable you to analyze errors without having to modify the program, you should specify the INCLUDE, MESSAGE, WORD, LINE and OFFSET additions for the information about the error that occurred.
Reward if usefull

What is the use of E/F tables?

What is the use of E/F tables?

Hi,
When ever we are loading the data into the cube,the data 'll store in F table.
Ex: I have cube which Tech name is like 0RT_C03.And data is loaded.I can find the that data in F table bu navigating like this
Goto SE11 ,select Table radio botton and type /BI0/F0RT_C03.then click the display tab which is available in the bottom of the screen.
Ther you can find new screen the click the botton Content or 'shiftcontrolF10' and then click execute botton.Here you can find the loaded data.As this you can see E table data also .But you can find no data.
When we are generating the report based on this cube the F table data only available for reporting.not E table data.
I hope this 'll helps you.assign point if this helps
Regards
JT Goud

What is the use of Fragmentation Content

Similar Messages

Maybe you are looking for