What is this Partition type mention in code "Partition by HASH".

Hi Team,
Regularly i am Adding new partions and sub-Partitions to production table, based on Date. For example Every Day Data stored in one partion.
please find below code, what i am using to add new partitions. I think this called RANGE partition.
CREATE TABLE "owner"."TABLE_NAME"
(     "COLUMN01" VARCHAR2(4),
     "ACOLUMN02" VARCHAR2(32) NOT NULL ENABLE,
BUFFER_POOL DEFAULT)
TABLESPACE "Tablespace_name"
PARTITION BY RANGE ("Daily_TIME")
(PARTITION "ABC_2008_08_31" VALUES LESS THAN (TO_DATE(' 2008-08-31 23:59:59', '
SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
Now i have found new type of code from one of the new table created by development team.
Code is.....
CREATE TABLE "owner"."TABLE_NAME"
(     "COLUMN01" VARCHAR2(4),
     "ACOLUMN02" VARCHAR2(32) NOT NULL ENABLE,
BUFFER_POOL DEFAULT)
TABLESPACE "Tablespace_name"
PARTITION BY HASH ("ACCOUNT_NUMBER")
(PARTITION "PART_P01"
TABLESPACE "tABLESPACE01",
PARTITION "pART_P13"
TABLESPACE "Tabelspace01") ENABLE ROW MOVEMENT;
There is no below code in new Table code....
( (PARTITION "ABC_2008_08_31" VALUES LESS THAN (TO_DATE(' 2008-08-31 23:59:59', '
SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
SO, i am unable to alter this table to add new partions monthly wise.
Please suggest me, How to save data date wise in this table. Also suggest me if it is not comes under RANGE Partion or not.
If not possible to add new partition data wise, I will inform to client.
Thanks & Regards,
Venkat

New table use hash partitioning, not range partitioning. You can refer to the Concepts:
http://docs.oracle.com/cd/E11882_01/server.112/e25789/schemaob.htm#CNCPT88864
The key of new partitioned table is account number, not date, therefore you cannot partition this table date-wise.

Similar Messages

Unable to set Non-FS partition type (GPT + RAID)

I'm performing a new install, and am following the RAID wiki for a RAID1 on 2 disks.
The wiki suggests to use the "Non-FS" partition type (DA00), rather than the "Linux RAID" partition type (FD00), to avoid potential issues down the road.
However, the example given in the wiki is for cfdisk (MBR). I'm using GPT partitioning rather than MBR, and cgdisk only accepts the FD00 partition type, not DA00.
Do the wiki's precautions against using FD00 only apply to MBR-partitioned drives? Or should I be setting the partition type some other way?

A few comments:
Four-digit (two-byte hexadecimal) partition type codes are, AFAIK, unique to my GPT fdisk (gdisk, sgdisk, and cgdisk) program and any programs that might mimic it. (The fdisk clone in busybox is one of these, IIRC.) These codes are not industry-standard; I created them just because I needed a compact way to describe partition types and to accept partition typing data from users. GPT actually uses 16-byte GUIDs as type codes, and those are very awkward, from a user interface perspective!
GPT fdisk does not have a type code of "DA00," so any documentation that refers to such a code is either flawed or is referring to something other than my GPT fdisk. (Somebody might have a patched version of GPT fdisk that implements such a code, though.)
AFAIK, there's no such thing as a generic "non-FS" partition type for GPT. The most complete list of GPT type codes I'm aware of is on the Wikipedia entry on GPT, and I don't see anything close to that meaning in its table.
According to this site, which holds a good list of known MBR type codes, 0xDA is the MBR type code for "non-FS data." Given the way I create GPT fdisk type codes, that would translate to DA00 if there were a GPT equivalent. Since there is no GPT equivalent, though, DA00 remains invalid in GPT fdisk.
Tools based on libparted, such as parted and GParted, do a terrible job at presenting partition type code data to users. I've just skimmed it, but the page to which you refer, s1ln7m4s7r, appears to set up RAID data on a partition with a GUID of EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 -- "Microsoft Basic Data". That is, the RAID partition will be flagged as holding an NTFS or FAT filesystem! That's one of the worst possible ways to set up a Linux RAID, in terms of its partition type code.
For the most part, Linux doesn't care about type codes, on either MBR or GPT. There are a few exceptions to this rule, though. Thus, on a Linux-only system, using a bad partition type code won't have dire consequences; but on a dual-boot system, or if the disk gets moved to another computer for some reason, a bad type code choice could result in data loss. Windows might try to reformat the partition to use NTFS, for instance.
The Linux RAID partition type code (GUID A19D880F-05FC-4D3B-A006-743F0F84911E on GPT; represented in GPT fdisk as FD00) was created to hold RAID data. Although I do recall running across advice somewhere to not use this type code for RAID data, I honestly don't recall what the reason was, but my recollection is that I was unimpressed.
Since you didn't post a link to the page that recommended using "DA00" for RAID devices, Nairou, I can't comment on that advice in context; however, I suspect the author was confused or that the wiki went through some edits and something got mangled. Unless somebody can provide a good reason otherwise, I recommend using the RAID data type code on a partition that holds RAID data. If you want to use something else, create your own random GUID; do not use the type code for a Microsoft filesystem, especially if the computer dual-boots with Windows!

Partition inaccessable due to wrong choice of partition type

Dear friends,
I have created a lot of problem for myself and now I desperately need your help to come out of this mess.
I have an 80GB hard disk with four partitions.
1- C 10GB NTFS
2- D 25GB NTFS
3- E 25GB NTFS
4- not allocated (reserved for Solaris)
(All of these partitions are primary partitions)
I decided to install Solaris 10 for intel on my 4th partition. First I installed it on my friend's laptop
and it is working great. Both Win XP and Solaris are working fine.
Then I tried to install it on my PC. Everything was fine till it reached where it asked for the partition
where I wanted to install the Solaris. On that screen, I choose the partition type for the fourth (unallocated)
partition as Linux/solaris, but by mistake, instead of leaving the partition types of my other partitions C, D
and E as other, I changed the partition types of these trhee partitions as "PRI DOS" thinking that these are the primary partitions.
Solaris was installed fine and it is working, but my other three partitions have become corrupted. I could not boot into Windows XP. From boot manager, when I tried to select partition 1 (C), it displayed some error message like PBR or BPR not found etc.
I tried to check the partitions with fdisk, it showed the partition type of C, D and E as unknown. Then I
installed windows XP again on my C partition and tried to access my D and E partitions, but they are
inaccessable. Although it is showing the partition size, but in properties, it says 0 bytes used and 0 bytes available.
Dear friends, I really can't tell you how much important data is there on these two partitions. I never thought that this mistake would cost me so much. Please please help me getting out of this problem.
I need to know if there's any possibility to correct this mistake with least amount of destruction to the file
systems on these partitions? Is there any data recovery procedure/software which can bring my data back in original form as much as possible??
Any suggestion/solution/clue/pointer in this regard will be very highly appreciated.
Thanks and best regards.
--MAC

Dear Kidari,
Thank you very much for the response and sorry for the late reply from my side. Actually I was posted away from my home for the last two months so could not try the solution mentioned in your mail.
Yesterday I managed to d/l knoppix and tried the method you had suggested. Unfortunately it did not work. It did not recognize the partition.
Here I would like to emphasize on the point that since I changed the partition type to "PRI DOS" during Solaris installation, so it is no more an NTFS partition. Now it has been changed to DOS 16 kind of FS. So all I need is a way to get my data back from a partition which was accidentally converted from NTFS to "PRI DOS". Any procedure/software which can read data from this kind of "changed" partition.
I would appreciate any clue to any other appropriate forum where I would be able to get a bit of help in this regard.
Thanks
--MAC
I'm afraid I don't know how to repair the NTFS
partitions. You could try to recover their data,
though, using a Knoppix CD. Knoppix is a Linux
distribution which a) runs a full system off the CD
without hitting the hard drive, and b) understands
NTFS.
1. Burn the iso from knoppix.org & boot from it.
2. The devices of your Your NTFS partitions will
probably be /dev/hda1, /dev/hda2 & so on.
# fdisk -l /dev/hda
should tell you.
3.
# mount /dev/hda1 /mnt
4.
# ls /mnt
That should show you all the stuff in the top level
of your first NFS partition. You'll need a network
drive (samba, NFS) to which to copy the things you
really really need. perhaps knoppix will let you
burn CDs too.
Repeat for each partition.
If this doesn't work, and no one else's suggestions
work (try them first!), then you can use the fdisk
utility within knoppix to change the declared
filesystem type
of a given partition: you could try to change the
type back to NFS.
# fdisk /dev/hda
t <to change type>
L <to see hex codes for different FS types>
This fdisking might make your problem worse. though,
so treat this as a last resort. Booting off
knoppix and copying stuff onto the network is safe.

Change partition type and 2 billion rows limit.

Hello experts ,
My DB's 1 table has 4 billion records , so I'm using range partition for this , I devided 10 partitions.
I want to change this range partition to hash partition.
In this time , I think I should do following .
1. execute "alter table bigtable merge partitions";
2. execute "alter table bigtable partition by hash (column1) partitons 10"
I think it will be correspond to 2 billion row limit in sequence 1.
How to execute re-partitioning in this case ? Should I unload current data to file or sometiong and load from this
Regards,
Jim

You can change the partitioning type without merging the partitions, and as you said you would hit the limit even if you did that. I would recommend stopping the SLT master job (if this is fed from SLT), then performing this operation. It will clearly take a good chunk of time to do so.
Also to note, hash will simply work on the column values that you partition on, you can't really guarantee that there will equal distributions across the 10 partitions.
Regards,
Justin

IDOC message type and message code and function?

Hai...
anyone can explain with example what is IDOC message type and message code and function? how it is used?
regards,
prabakaran

Hi
An IDoc type can be implemented for various "logical" messages; one message can also be assigned to different IDoc types (m:n relationship).
The message is defined by the values for message type (required), message code (optional) and message function (optional). These three fields belong to the key fields in the partner profiles, which are used, for example, to determine inbound processing. If the 'Message type' field is not maintained (e.g. in the case of a control record from Release 2.1, in which MESTYP did not exist), the IDoc Interface uses the value from STDMES (EDI message type).
If possible, the descriptions of the message type should be linked to the corresponding EDI message type.
The message ORDERS (= message type) identifies purchase orders (outbound) and sales orders (inbound).
Message code or Process Code for Inbound Processing
Code which identifies a process type.
The process type determines which process is used to convert an IDoc to an SAP document.
Process code for outbound processing
Code which identifies the type of data which is to be sent via the IDoc interface.
Using the process code, the IDoc interface finds the application selection module which converts the SAP document into an IDoc.
The process code is only used with applications which perform outbound processing via Message Control (NAST).
Thanks & Regards
Kishore

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7
I found the manual update, which worked!
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5595&fileID= 5604

Hi Barbara,
For failed 13.1.2 update error U44M1P7, Please refer to the solution mentioned in the following threads :
http://forums.adobe.com/message/5396792#5396792
http://forums.adobe.com/message/5409050#5409050

What is "Type of Legal Code" in legal regulation setting used for?Thanks

There are several options for "Type of Legal Code" in legal regulation settings.What are they used for? We found that if "others" is selected in this field for certain legal regulation, this legal regulation can't be found in the configuration of "Activate legal regulation " under legal control service or embargo service.Does anyone know what this field used for?thanks

Define the legal regulations is done for all import and export processes you use with SAP Global Trade Services (SAP GTS).
If, for example, you want to use the embargo, sanctioned party list screening, and license determination services in SAP GTS, you must create a legal regulation for each service.
Type of Legal Code : help in indentifing for which purpose its used.
for example:
US Automated Customs Environment (ACE)
Customs Processing - Germany (ATLAS)
German Foreign Trade Regulations
EU Common Agricultural Policy (CAP) - Restitution
Customs Processing - Austria (eZoll)
Customs Processing - Belgium
Customs Processing - Switzerland
Customs Processing - Denmark
Customs Processing - France
Customs Processing - Great Britain
Customs Processing - Netherlands
Export Administration Regulations
Embargo - United Nations
Numbering System - European Union
Letter of Credit Processing
North American Free Trade Agreement (CA/MX/US)
Pan-European Agreement (EC/EFTA
PAN-EURO-MED
Vinmar Sanctioned Party List Screening
Sanctioned Party List Screening
(NCTS) Transit Procedure Austria - eZoll Transit
(NTCS) Transit Procedure Belgium
(NCTS) Transit Procedure Switzerland - Transit
(NCTS) Transit Procedure Germany - ATLAS Transit
(NCTS) Transit Procedure France - Transit
(NCTS) Transit Procedure The Netherlands
(NCTS) Transit Procedure Slovenia
Others doesn't have relavance. so only i doesn't need activation.

What Message type and Process Code to use for Purchase Order Change in 4.6C

I like to implement in SAP R/3 4.6C a scenario for Purchase Order Change, via inbound IDoc.
I have been searching, but could not find what Message Type, Idoc Basic Type and Process Code to use.
I can not imagine this functionality does not exist in 4.6C.
Any suggestions for my problem are welcome.

Hello,
In this case you should use the message PORDCH and BAPI method BAPI_PO_CHANGE but only exist as of release 4.7.
Function module    BAPI_IDOC_INPUT1
Idoc Type              PORDCH01
Message Type      PORDCH
So check carefully the following OSS notes:
[Notes 589066 - BAPI_PO_CHANGE: Incorrect account assignment to network |https://service.sap.com/sap/support/notes/589066] (not be fooled by the description)
[ Notes 197958 - BAPIs for purchase orders - Missing Functions|https://service.sap.com/sap/support/notes/197958]
Regards,
Andrea
Edited by: Andrea Olivieri on Sep 3, 2009 10:17 AM

What event should i use to make code execute whenever I type a letter?

This is what I'm trying and it makes an empty file, so I know that the code is executed at least once, but since the file is always empty, I don't think that I'm using the right method to get text out of the text pane.
private void jTextPane1PropertyChange(java.awt.event.InputMethodEvent evt)
String words;
FileOutputStream out;
PrintStream p;
try
words = new String(jTextPane1.getText());
out = new FileOutputStream("myfile.txt");
p = new PrintStream( out );
p.println (words);
p.close();
catch (Exception e)
System.err.println ("Error writing to file");
Edited by: hansbig on Jan 13, 2008 12:41 PM

PrintStream doesn't like the FileWriter, it's all squiggly. Oh, and I found the right event so that it updates every time i type a letter. So, what is this you say about making a FileOutputStream an attribute? I don't know what that means. I'm also not sure what you mean by listener, is that the PrintStream?
private void jTextPane1KeyTyped(java.awt.event.KeyEvent evt) {
FileWriter out;
PrintStream p;
try
out = new FileWriter("myfile.txt");
p = new PrintStream(out);
p.println (jTextPane1.getText());
p.close();
catch (Exception e)
System.err.println ("Error writing to file");}
}

HP service Tags - what type of bar codes do they use?

Hi there,
i have asset tracking software and a bar code scanner. I'm looking to know what type of bar code is on the HP service tags. As i want to be able to scan in the bar code to give me the serial number of the machine.
thanks,
Paul

Hi,
your problem is that you are trying to resolve a problem related to a specific statement by using instance-wide tools. You should look at performance stats for that particular statement.
1) Identify sql_id of the offending statement (e.g. select sql_id from v$sql where sql_fulltext like '%part_of_statement_text_here%', if it doesn't return results check case or look in
dba_hist_sqlstat)
2) Look for records with this sql_id in DBA_HIST_ACTIVE_SESS_HISTORY (use filter on sample_time). Compare performance indicators for the timeframe of the incident and outside it
3) You can also find performance stats for this statement in DBA_HIST_SQLSTAT, but you will have aggregates over snapshot duration
Given your symptoms, the most logical explanation is a plan flip. Check plan_hash_value in DBA_HIST_SQLSTAT -- if it changed around the time of the incident, that will confirm your suspicion.
Use dbms_stats.display_awr to display both "good" and "bad" plan. Try to understand the key difference, look at predicates for any hint that could explain it. If it doesn't give you results,
use format=>'advanced' to generate outlines for both plans, then you can set STATISTICS_LEVEL=ALL and run the statement with both plan, producing extended plan statistics. Use
dbms_xplan.display_cursor(..,..,format=>'allstats last') to display it. If having difficulty interpreting it, post it here to get the help from community.
Best regards,
Nikolay

What is this line of code means???

Hi have a general question, I am not sure if it right place to ask. But I will be grateful if some body could help on this one. I could not figure out what is that line of code (**) is doing or what does it mean. I gave sample implementation here.
Public class Decoder{
InputStream in
Public Decoder(InputStream in){
This.in = in;
String st = somefunction(in)
public static Xval decode(InputStream in){
return new Decoder(in).decode(); **
What I don�t understand that what is line of Code do �return new Decoder(in).decode(); � I have never seen this kind of implementation. The return type is Xval but the function is retrunin t object of this (Decoder) type. And what is Decoder(in).decode() when function decode() is doing nothing except returning a object???
Thank you

Apparently, the Decoder class has a method called decode() that returns a Xval object. The line is equivalent toDecoder d = new Decoder(in);
Xval xv = d.decode();
return xv;

While performing travel sensor calibration get error code 1802. What is this means in plain language.

We are using NI configurator 3.1. On our DVC5010f fisher controllers we have replaced potentiometer. While performing calibration thru NI we are getting error code 1802. Can some one explain in plain language what is this means and what can be done to fix this.

We have replaced potentiometer (Travel sensor ) on our Digital Valve Controller DVC5010F (Fisher). After Replacing this travel sensor, we were doing calibration using NI configurator software. During the calibration the software did not recognized the set range (variable) of travel sensor and gave us error code # 1802. These codes are accesible through www.ni.com web site. To get to listing of error codes. go to main page and in search block type in Fieldbus error code and select option 2 from several choices. these gives you listing of error codes. Code # 1802 derived from combination of error codes 0x0002, 0x0800 and 0x1000. These is where I am getting confused ...what is this? can some one explain this in simple term.
Attachments:
FieldBus Error Code 1802.JPG ‏47 KB
FieldBus Error Code tavel count.JPG ‏53 KB

What does this mean when burning CDs...Error code 0x80020022?

I'm trying to burn data to a CD. I get the above error message, plus the error message "Burning the disc failed because communication to the disc drive failed. Error code: 0x80020022."
This has happened with 3 blank CDs. I followed the standard advice to use a different brand of CD (although I typically use imation CD-R media). How can I get Macbook to burn data to CD, and what does this cryptic message mean?
Thanks,
Dan Neunaber

It seems I have corrected the error myself. I reset my PMU (I think), and now it seems to burn beautifully. With the same type cd's that it did before.
You can find instructions on how to perform this operation here. It only takes a few seconds. http://docs.info.apple.com/article.html?artnum=303319
Besides now burning beautifully it seems that my apps are now starting up quicker. I would say that I have gained about 30% in speed. Weird. But nice.
BR
Karsten

[SOLVED] Change swap partition type code

Hello,
I get error on getting my swap to work because I have it configured in fstab and systemd also automatically picks it up. According to the wiki https://wiki.archlinux.org/index.php/sw … by_systemd I can either remove my fstab entry or change the partition type code.
Guide me what I shall read up on in order to change my swap partition type code - so far I dont quite follow what is relevant in my searches.
Regards
Martin
Last edited by onslow77 (2015-02-19 21:52:50)

Hello,
I see, the type code is the same as the system id for the partition, so I can use fdisk for MBR and gptdisk for GPT.
Regards
Martin
Last edited by onslow77 (2015-02-19 20:41:10)

HT5625 I'm trying to create a new Apple ID but when I was putting on my information, there's a box asking for an ITunes gift code. What's this and how can I get one?

I'm trying to create a new Apple ID but when I was putting on my information, there's a box asking for an ITunes gift code. What's this and how can I get one?

You're not obligated to insert a gift code. But you can purchase gift codes on the Apple online store (gift cards or certificates) or Apple Retail store
Gift codes are pre paid cards so you can use credit on the iTunes Store to purchase content
To create apple ID without payment method:
http://support.apple.com/kb/HT2534?viewlocale=pt_PT

What is this Partition type mention in code "Partition by HASH".

Similar Messages

Maybe you are looking for