What is timeout for messaging server waiting on the 220 banner

May I know what the timeout is for messaging server waiting on the 220 banner during the first attempt? Thanks.

YY_MM wrote:
May I know what the timeout is for messaging server waiting on the 220 banner during the first attempt? Thanks.As you didn't provide the version of Messaging Server you are using, I can only point you to the values for the latest version (6.3):
http://docs.sun.com/app/docs/doc/819-4429/acmkh?a=view
STATUS_MAIL_RECEIVE_TIME (Integer) : Specifies, in minutes, how long to wait to receive the SMTP response to a sent MAIL FROM command. (Also corresponds to the time we wait for the initial banner line, and the time to wait to receive a response to a HELO, EHLO, or RSET command.) The default is 10.
Regards,
Shane.

Similar Messages

FPN configured for message server port

Hello,
I would like to configure my Consumer Portal to connect to my Producer on port :8101 (the default message server port of the Producer). However, each time I try with this conifguration FPN breaks and nothing works - can't browse the PCD or see remote roles via Identity Management (when I switch the config back to point to port :50000 in the Producer object on the Consumer it works fine again). I'm not using a SAP web dispatcher between the two portals but Producer portal is indeed listening on port :8101 since I can hit it directly. Is this a limitation of FPN?
My http trace shows an ABORT message when trying to connect with the :8101 configuration.
The 8101 port is necessary to be configured in order to leverage our clustered load balanced environment which has the 8101 message server port listening and redirecting to a cluster of servers.
Patrick

When using Remote Delta Links one can configure the SAP Message Server's RMI-P4 port (3901 by default) for RMI-P4 communication.
For the HTTP load balancing you cannot configure it to point to the HTTP port of SAP Message Server (8101 by default) only the application server's HTTP port on the Central Instance (e.g. 50000) can be used.
But don't bother yourselves with this, because SAP recommends using SAP Webdispatcher for HTTP load balancing in FPN scenario, so don't use SAP Message Server directly for HTTP load balancing in the FPN connection setup!

Who can explain the message server string in the OSS connection ?

Who can explain the message server string in the OSS connection ?
For example:
MSG SERVER FIELD IS:
/H/128.168.0.28/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
What is the mean to each field in the string?
What does the first "/H" mean?
What does the second "/H" mean?
What does the third "/H" mean?
What does the first "/S" mean?
What does the second "/S" mean?
What does "/oss001" mean?
Thanks .

Hi,
when you define techinacal settings in tcode OSS1
Transaction OSS1 -> Parameter -> Technical Settings -> Change -> Save. The SAPOSS destination is only automatically updated when you save.
/H indicate server
/S indicate Service
check following SAP note
Note 33135 - Guidelines for OSS1
regards,
kaushal

Too many recipients found for message type ORDERS in the ALE model

Hi all ,
please help me to solve this issue .
i done with ale settings .
orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks

> orders message type is used in 2 different model view for 2 different systems
do both of them carter diffrent needs or is it the same idoc which is being sent to diffrent systems?
if yes, then use a single model view with noth receiver systems defined in it.
if not, i would suggest, copying the standard idoc and create a zidoc and then use different ones for diffrent receivers....
or u can use diff versions of the orders message type...
say orders05 for one.... receiver and orders02 for another one....
hope this helps!!
Cheers!!
Sidharth

My iphone 4 does not ring for messages when i use the handsfree..

my iphone 4 does not ring for messages when i use the handsfree..

iPhone supports A2DP audio streaming. If you have it paired to a handsfree kit that supports this, for example, an in car audio system, and are currently tuned to a source other than the phone, the phone will send the audio for things like text message alerts to the handsfree system, but you will not hear them. This is just the nature of the beast. If you do not intend to use audio streaming from the phone, you may be able to disable this in the in car system. This should not affect Bluetooth calling. There is no option to disable this on the phone itself.

Mutiple instance for messaging server

Can I set up mutiple instance of messaging server in one physical server ? The purpose is to separate domain to use difference resource, configuration. Now we use JES verion 6.

Can I set up mutiple instance of messaging server in
one physical server ? The purpose is to separate
domain to use difference resource, configuration. Now
we use JES verion 6.While I don't know if it supported(I think it wasn't but we needed to make it work while JES is still in transition about HA strategy), I did an installation of 3 JES2004Q2 messaging instances on 3 different hosts that were all in the same Veritas Cluster. With this configuration, we were able to have any messaging instance run on any host in the cluster (and could shift them so all 3 instances were running on a single host without problem, which we did several times)
Each host had a SAN partition mounted as
/usr/iplanet-$host
such as
/usr/iplanet-host1
/usr/iplanet-host2
these partitions were able to be moved between hosts as needed by the cluster software.
On each host, I made sure it had the SAN mount in place, then installed messaging as:
/usr/iplanet-$host/msg61
(instead of /opt/SUNWmsgsrv)
and when I ran /usr/iplanet-$host/msg61/sbin/configure
I said that the data directory should be:
/usr/iplanet-$host/msg61/msg-$host
I installed the admin server as:
/usr/iplanet-$host/admin5
On each of the messaging instances, I ran the ha_ipconfig script to lock down the IP address that the server processes bound to (and also had to lock down the ens daemon using a separate configutil variable, it still listened on the wildcard address).
When I was configuring the admin servers, I made each instance's run on a seperate port number so I didn't need to worry about locking down the IP. We also had to make a slightly customized version of the VCS agent that Sun supplies to work with the model we decided on.
There are still some issues, such as with performing patches. To patch an instance, you would need to make sure it is running on the host that it was originally installed on. If you only have a single host, I don't think the technique I used would work for you (unless you are able to use Solaris 10 beta and the zones functionality, and I am not sure if the JES packages play well with it yet)

Set Command Timeout For SQL Server

Hello,
How do you set the command timeout for the 'open' statement? I am running a Database via SQL Server and I tried the dialog box timeout statement (the check box on the advanced tab) and simply get an error. The manual shows a 'step.commandtimeout' but how is it implemented?
Thanks,
Kevin

Kevin -
I looked at the internal implementation of the CVI SQL Toolkit. The toolkit function that the step type uses is DBNewSQLStatement. Internally to the toolkit the function opens a recordset instead of a command object. The command timeout attribute is only available on a command object and not on a recordset object, so as implemented inside the toolkit the error is appropriate. I think the toolkit could have used a command object to create the recordset object and this would allow the toolkit to let you set the timeout attribute. Unfortuneately this is not the way it was done.
For the future I may investigate to see if there is a way to bypass this limitation by using different toolkit functions, but I am not sure if there a
re any side effects.
Scott Richardson (NI)
Scott Richardson
National Instruments

What is name for default server

Hi
we use to invoke a server before invoking the deployment tool whats the name of the defualt server's named...can any one find me the answer

Thank you for your reply,
I am finding a .dat file in the devsuitehome\\reports\server. But name of that file is same like which I give in default.env file for APPLICATION_REPORT_SERVER parameter.
My doubt is whethere report server name is same as machine name and application server name?
And I want to check whether I have given correct report server name in default.env file too..
Plz help
Edited by: user13522443 on Feb 9, 2011 4:14 AM

Anti-Virus Software for Messaging Server

I am new to Java System Messaging Server. I would like to know that what is the Anti-Virus Software that can be use with Java System Messaging Server. (Symantec is the one but I dont know about the other)
And I would like to ask that can I use NOD32 (ESET) with Messaging Server ?
Thank you very much.

Ok. NOD32 runs as smtp filter. That's easy to configure with Messaging Server, using the 'aliasdetourhost" keyword.
In the comparison test they show on their website, I note that they don't compare against ClamAV. ClamAV has no license fees. It's open source. It runs on Linux and Solaris. I'd go there, first.
Since you're sensitive to costs, I'd suggest you have a look at running your system on Solaris X86. It's free, too.
Messaigng Server, SpamAssassin and ClamAV all work very well on Solaris.

Pw for messaging server o9iASwireless 2

I'm using o9iASwireless 2 beta4.
I have configured the following instance:
System Manager > Wireless Server > Messaging Server > messagingservertest
Now I have to insert a password and a username for the Pushdrive instance:
System Manager > Wireless Server > Messaging Server > messagingservertest > Driver Instances > PushDriver Instance
Can anyone tell me the default password for the messaging server at the following adress:
http://messenger.oracle.com/push/webservices
There are two messages in the queue but they couldn't be send. My log shows the following error:
11/23/02 12:09:49 PM ERROR : [Thread-12] messaging.transport.driver.push.PushDriver.init(PushDriver.java:108)
User name missing.
Any suggestions?
Thanks in advance.
Regards,
Thomas

It's working now. Thank you very much (also for the link). So I assume that the limited amount of messages will count for all the different types (email, fax, sms, WAP push etc.). To my opinion, messaging (and pushing information in general) could add a lot of surplus value to wireless services. So let's work on the development of killer apps now ;-)
Regards,
Thomas

Messaging server not calling the SpamAssassin

HI all,
The current instalation:
For SJES Messaging :
# ./imsimta version
Sun Java(tm) System Messaging Server 6.2 (built Dec 2 2004)
libimta.so 6.2 (built 00:34:23, Dec 2 2004)
SunOS rcaredev 5.9 Generic_117171-08 sun4u sparc SUNW,Sun-Fire-V240
For Spam Assassin:
# ./spamassassin -V
SpamAssassin version 3.2.3
running on Perl version 5.8.8
The option.dat contents:
! for Spamassassin
spamfilter1_config_file=/opt/SUNWmsgsr/config/spamassassin.opt
spamfilter1_library=/opt/SUNWmsgsr/lib/libspamass.so
spamfilter1_optional=1
spamfilter1_string_action=data:,require "fileinto"; fileinto "Junk"
mm_debug=5
# cat /opt/SUNWmsgsr/config/spamassassin.opt
host=127.0.0.1
port=783
mode=0
verdict=spam
debug=1
# ls -l /opt/SUNWmsgsr/config/spamassassin.opt
-rw-r--r-- 1 mailsrv mail 52 Nov 15 01:49 /opt/SUNWmsgsr/config/spamassassin.opt
The imta.cnf contents:
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 poo
l IMS_POOL fileinto $U+$S@$D destinationspamfilter1optin spam
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL ma
ytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 destinationspamfilter1optin spam
I ran:
# ./imsimta cnbuild
# ./imsimta restart
Then I started thge :
# ./spamd -d
But nothing happens, if I manually run:
# telnet localhost 783
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
SPAMD/1.0 76 Bad header line:
Connection to localhost closed by foreign host.
Which proves that the spamd is listening on port 783.
The messaging server is not calling the SpamAssassin on the port 783, any ideas what could have gone wrong?
I also checked the "snoop" command and also "spamd -D" for debug, no traffic go to the spamd daemon.
Best

Hi,
goSolaris wrote:
The junk emails are sent now to the folder "Junk" in the users mailbox, can you comment on the following
1. Does the spam emails live in the Junk forlder forever until the user delete them?Emails aren't deleted from users email folders (including Junk) unless you have configured a folder expiry rule. The following web-page steps you through what is required to set up just such an expire rule:
http://docs.sun.com/app/docs/doc/819-2650/6n4u4dttr?l=en&a=view
2. If I need to discard completely the spam emails instead of sending them to a folder in the user mailbox, what change should I do to the channel configuration?The following link gives an example of how to configured a sieve rule which will discard emails above a certain spamassassin score and to fileinto a 'spam' folder if the score is below this value.
http://docs.sun.com/app/docs/doc/819-4428/6n6j4261t?a=view#gebhx
3. After applying the patch, the documentation says that I can work with the existing configuration files or upgrade using a set of commands, do you think keeping the existing configuration (to minimize the changes) will work fine?You definitely need to run the ./patch-config and ./install-newconfig commands post-upgrade. Otherwise fixes that have been made to things such as the messaging express interface will not be represented (files need to be changed for a lot of the fixes).
Regards,
Shane.

Set a timeout for crystal sessions while using the Windows.Forms.Viewer?

Hi,
I am looking for a way to set the timeout for the crystal report sessions when using the Windows.Forms.Viewer in a .NET application. I guess that the default value is 20 minutes (like in the entperprise installations) but we cannot afford to keep many sessions open for that long. Is there a registry entry which can be set? Or even a way to do this programmatically?
Thank you in advance,
Stratos

Hi David,
we are talking here about a standalone .NET application where the reports are installed locally (like the application itself). We are not retrieving the reports from a server. The whole thing was developed using the crystal report viewer model probably because it was easier to do so. Is there a method in this model to tell the crystal runtime to do the clean-up work either for a report (like the ReportDocument.Close() ) or for the entire runtime instance. Dispose() does not seem to help us. If you say that there is no other way than redesign then we have to consider this option also.
Cheers
Stratos
PS: What I was thinking of (as Plan B instead of using the ReportDocument object model) is to instantiate the crystal report viewer object in a separate process (.exe). Please note that we open a new crystal report viewer windows for each report, which is displayed. Closing the viewer window (ie. terminate the process) will at least then clean up and release the crystal DLLs and hopefully close the database connections. Or am I missing something here?
Edited by: Efstratios Karaivazoglou on Jul 29, 2008 10:05 PM

Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main Dell computer and my Iphone. Any ideas? Duanekot

Overnight, the taxt body of emails will not display for all messages in the inbox. Only the From and To and a subject line display. All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully. Any ideas?? Duanekot

See if this helps .... Reset the iPad.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

User Access for Messaging Server and Calendar Server

This is the first time i have setup JES. What i did was install Messaging, Calendar, Directory and Administration server. I did a configure after install option and followed the post install instructions for all of those servers.
I then started the administration console and added a user via the crete user option under "users and groups". Next i tried to logon as the user i just created via webmail and pop (exchange) and get an error message stating that the user does not exist. I did a search on the user via that admin server console and i did find the user and the "mail account" option was selected. I also verified the password was correct.
My main question is what am i doing wrong?
My goal is to create a email and calndar server using JES. I also want webmail.
Do i need to configure Identity Manager to create users for mail / calendar? Or do i create the users using the directory server / administration console?
Also i didnt setup delegated administrator. I didnt think i needed it becasue i will configure all of this using on administrator. If i dont need multiple administrators do i need delegated admin.
Here is some background information.
Sun W2100Z
4GB RAM
Solaris 10 01/06 x86
JES 2005 Q4
Thanks for any assistance.

You can not use the Administration console for creating Messaging users. Look-up "provisioning users" in the Messaging admin guide. If you're using schema 1, use Delegated Administrator. If you're using schema 2, use commadmin.
HTH,
Roger S.

Server Timeout for Authentication server

Hi all
Does anybody know how to increase server timeout more than 30 sec, may be 60 sec.
Our LDAP structure very deep, 5 levels - I mean login accounts placed on the 5th level from the top.
I configureed web-authentication via LDAP, for test I created new OU and login is succesfull.
Then when real account with real OU tried to login, there always timeout error on debug window of WLC.
So I am sure it is because of deep tree of AD. It is configured long time ago and this structure already used by some applications so almost impossible to change this structure.
So only way I see to increase server timeout.
Best regards.

Hi Toleukhan,
it looks like AAA issue to me. I am moving this to security for faster response.
thanks,
Vinay

What is timeout for messaging server waiting on the 220 banner

Similar Messages

Maybe you are looking for