What is twin sing? what kick off in implementation project

what is twin sing? what kick off in implementation project
regards
ramana

Hi,
Twin Sign means Both the CLIENT and the COMPANY(IMPLEMENTING) signing on the Project papers by defining various project related things.
Once it is signed the Project Will KICK OFF means literally starts,
With the required resources, software and hardware.
Regards,
Anji

Similar Messages

What is twin sign? what kick off (in implementation project)

what is twin sign? what kick off (in implementation project)
regards
ramana

Hi,
Twin Sign means Both the CLIENT and the COMPANY(IMPLEMENTING) signing on the Project papers by defining various project related things.
Once it is signed the Project Will KICK OFF means literally starts,
With the required resources, software and hardware.
Regards,
Anji

Clusterware 10g: what kicks off 3rd-party failover script?

I am trying to use Oracle Clusterware 10g (installed on two identical Dell Linux boxes,
OEL 5.2) to failover a 3rd-party application, specifically websphere MQ. I have a ksh
script that is supposed to start/stop/restart the application.
Clusterware will fail over the IP address fine to the other box if I yank the primary box's
cable, but the app itself doesn't fail over. If I knew what (in Clusterware) did the
"kicking off" of the ksh script I could troubleshoot it more. I used the instructions in:
http://www.oracle.com/technology/products/database/clusterware/pdf/TWP-Oracle-Clusterware-3rd-party.pdf
and I'm pretty sure I did it right.
Any ideas?

Here is the action script:
#!/bin/ksh
LOG="/san1/var/mqm/config/Controlmq.log"
echo "script started at `date` from `hostname`" >> $LOG
############################### func_stopMQ ######################################
func_stopMQ () {
QUEUENAME=$1
while [[ `ps -ef | grep $QUEUENAME | grep -v grep | grep -v Control| awk {'print $2'} | wc -l` -gt 1 ]]
do
echo "DEBUG : `ps -ef | grep $QUEUENAME | grep -v grep | grep -v Control` " >> $LOG
echo "there are `ps -ef | grep $QUEUENAME | grep -v grep | grep -v Control| awk {'print $2'} | wc -l` processes running associated with $QUEUENAME on `hostname`" >> $LOG
endmqm $QUEUENAME
endmqlsr -m $QUEUENAME
## echo "sleeping for 10 seconds before checking again"
sleep 10
done
## echo "All set, there are no processes associated with $QUEUENAME "
echo "stopped $QUEUENAME at `date` from `hostname`" >> $LOG
return 0
################################ func_startMQ ######################################
func_startMQ () {
QUEUENAME=$1
case $QUEUENAME in
MECM|MEQM)
PORT=1414
MEQA|MEQB)
PORT=5077
esac
## echo "starting $QUEUENAME"
strmqm $QUEUENAME
sleep 5
## echo "STARTING listener for $QUEUENAME"
runmqlsr -t tcp -p $PORT -m $QUEUENAME &
sleep 5
runmqsc $QUEUENAME < /san1/var/mqm/config/startCH_$QUEUENAME.DEF
echo "started $QUEUENAME at `date` from `hostname`" >> $LOG
return 0
################################ func_checkMQ ######################################
func_checkMQ () {
QUEUENAME=$1
PROCESSCOUNT=`ps -ef | grep $QUEUENAME | grep -v grep| grep -v Control| awk {'print $2'} | wc -l`
if [ $PROCESSCOUNT > 1 ]
then
echo "there are $PROCESSCOUNT processes associated with $QUEUENAME" >> $LOG
echo ":::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::" >> $LOG
echo "Status of $QUEUENAME : " >> $LOG
runmqsc $QUEUENAME < /san1/var/mqm/config/ChannelStatus.DEFS
return 0
else
echo "there are $PROCESSCOUNT processes associated with $QUEUENAME" >> $LOG
echo ":::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::" >> $LOG
echo "Status of $QUEUENAME : " >> $LOG
runmqsc $QUEUENAME < /san1/var/mqm/config/ChannelStatus.DEFS
return 1
fi
ACTION=$1
# QUEUENAME=$2
case $ACTION in
start)
## func_startMQ MECM
## func_startMQ MEQA
func_startMQ MEQM
func_startMQ MEQB
stop)
## func_stopMQ MECM
## func_stopMQ MEQA
func_stopMQ MEQM
func_stopMQ MEQB
check)
## func_checkMQ MECM
## func_checkMQ MEQA
func_checkMQ MEQB
echo "Sorry, the proper usage for this command is ControlMQ.sh start|stop|check"
exit
esac

Off site implementation

Hi,
in the next project i have work on off site implementation project.
till now i am in onsite implementation.
can any body expalin what is the difference between on site and offsite implementation.
Regards
venkat

Hello,
The difference between both is you are physically not there in the client's place. If your company is using clients network (local area network will be connected to client's network using WAN) there is no need of VPN. If the connection is internet based, then you need to have a Login to VPN.
Almost all the dicsussions and workshops are help there in on-site, you may be a part of the discussion using telephone or video conferencing. The work will be devided and allocated.
The advantage of working at client's place is , if there is any issues you can speck to the concrned person directly and the issue can be solved then and there.
Prase

What is meant by kick off meeting?

what is meant by kick off meeting?

hi,
its the first step for a project. all the top ppl involved from the client and the IT partner are present. the projct managers make presentations like the scope of the projct, timelines etc.
saurabh

Trying to download Mavericks I get install_error_distribution_signed_by_Apple. then I get kicked off to Lion troubleshooting,I meet the requirements what the h***?

Trying to download Mavericks I get install_error_distribution_signed_by_Apple. then I get kicked off to Lion troubleshooting,I meet the requirements what the h***?

Try this thread, it worked for me: https://discussions.apple.com/message/22873594#22873594

I keep getting kicked off internet and have airport extreme, what can fix?

I keep getting kicked off airport extreme on my new Macbook Air-- what are possible reasons and solutions?

Interference...
PowerCycle the extreme for now and see if it does any difference.

I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this.

AE what are those things that turns on and off in the Project

AE what are those things that turns on and off in the Project

I had was $1,000 credit in September of 2014. In October, I called Digital Juice, because I had a stroke 25 years ago and I told him I would be foolish to give up $1,000 and join Platinum Account. He agreed with me. He then said why don’t you join Platinum Account, and he can update the $1,000 to the account. I said, OK. Then about January 2, $1,000 was in the Platinum Account. I am starting to do some Wedding videos, and I just noticed that the $1,000 credit wasn’t there. What happened to my $1,000? Oh by the way, your Update Status only goes back to December and not back to July.
Rich
"Todd_Kopriva" <[email protected]> said:
AE what are those things that turns on and off in the Project created by ( https://forums.adobe.com/people/Todd_Kopriva ) in After Effects - ( https://forums.adobe.com/message/7122815#7122815 )
I don't understand the question. Please explain in more detail.

TS1717 I had to restore my itunes library however everytime I try to go to my podcasts I am kicked off of Itunes with a send/dont send error report I can acess podcasts only while syncing ipod

I have been having trouble getting into my podcasts after restoring my itunes library to an earlier library, every time I select podcast i am kicked off itunes with an error send/dont send pop up however I can acess the podcasts when sinking my ipod only

Hello there, danbucfan.
It seems that you were referred to us from the very article that provides steps for troubleshooting your issue. Although they may seem extensive, these steps will help pinpoint where the issue lies:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
If you continue to get the error, please feel free to provide the exact error message, to see if that sheds further light on what your issue may be.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

What's going on with Project "Gateway" and Sybase?

I've just returned from Teched in Berlin where I followed mostly the mobile track of sessions.
I've come away alternately energised and confused. Each topic in its own right is clear, but piecing allthe components together is a different matter.
Has anyone got opinions on the future role of project Gateway? I saw many sessions by Sybase on the SUP and only one which mentioned Gateway. Gateway didn't feature in the mobile strategy slides. However, I have seen material mentioning the future tie-up of the two. If this should happen, then how might they interact? And what future for the co-innovation platform? Can we draw any conclusions on this yet?
The instant value mobile apps session CD161 seems to build on top of the SAP Data Protocol (SDP), but thinking back, they didn't mention Gateway in there at all. And the co-innovation platform session was silent on both Gateway and SDP
So does "Instant Value" equal "Project Gateway"? It can't be since the Sybase guys talk a lot about Instant Value. Are there two interpretations of this term within the organisation?
Just hoping to kick off a general discussion on this subject. All opinions and replies welcome. Especially from insiders...
Alex.

Hi Steffan - good point. I kind of assumed that LMS is another term for Project Gateway... They seem to be addressing the same problem, and the architecture diagrams look qualitatively similar. The CD121 Sybase slides also talk about the "SAP Mobile Connector", which might be yet another name for the same thing. I think you would know better than me since you've already built that thing you showed at the Demo Jam - what data consumption technology was your demo-ed app using?
I get the impression that there have been a number of independent development streams within SAP which are only now being brought together. This manifests itself to us as mixed or incomplete messages. It's easy to see how at a teched, each group might be responsible for getting its own message out and not necessarily integrating into the overall message of the mobile strategy.
So essentially there are two categories of mobile app inthe SAP vision:
1. Instant Value and
2. Mission Critical.
Then there are various methods of consuming SAP backend data from our mobile apps:-
1. Netweaver mobile DOE (via co-innovation platform?)
2. LMS
3. Project Gateway
4. Web services
5. BAPIs (via JCA)
(This is five methods, not four, which is another reason why I thought LMS and Gateway were the same thing).
Then on top (or underneath?) of all this, you have to make a call on whether to make use of the SUP middleware and/or a security product like Afaria.
So perhaps the most likely combinations look like:-
Mission Critical apps with SUP ( + Afaria ) + DOE/Gateway
or
Instant Value apps with (LMS/Gateway or simply Web services/JCA)
But if you have a LOT of Instant-value apps to build I guess your landscape could become complicated enough to justify the middleware too.
Now please someone point out the flaws in this summary!
Alex.
Edited by: ajfear on Oct 20, 2010 6:44 PM

Payables Transfer to General Ledger does not kick off Journal Import

Hello,
This is on 11.5.10.2.
We have some invoice batches that are not posted in GL. This problem is sporadic and only happens for some batches and not all. It is unclear to why some batches are posted fine and others are not.
The problem is at payable trasnfer to General Ledger program. After these batches are validated and create accounting has been executed successfully, we submit Payables Trsnfer to General Ledger program.
This program does not kick of Journal Import child process for these batches. It just completes normally without showing any error detail on log/output.
What could be the reason? Why Payables Transfer to General Ledger is not kicking off Journal Import for these batches?
I have even verified GL_INTERFACE and there is nothing there.
Please advise.
Thanks
D

Are these invoices accounted, and was create accounting done for these Invoices?
If so these should be available for the import.

Auto-kick off MaxL script after Oracle GL data load?

Hi guys, this question will involve 2 different modules: Hyperion and Oracle GL.
My client has their accounting department updating Oracle GL on a daily basis. My end-user client would like to write a script to automatically kick off the existing MaxL script which is for our daily data load in Hyperion. Currently, the MaxL script is manually executed.
What's the best approach to build a connection for both modules to communicate with each other? Can we use a timer to trigger the run? If so, how?

#1 External scheduler.
I've worked on Appworx and it has build a chain dependent task. There are many other external schedulers like Tivoli,....
#2 As Daniel pointed out you can use Windows scheduler.
For every successful GL load add a file to a folder which is accessible for your Essbase task.
COPY Nul C:\Hyperion\Scripts\Trigger\GL_Load_Finished.txt
Create another bat file which is scheduled to run on every 5 or 10 mins (this should start just after your GL Load scheduled task)
This is an example i've for a triggered Essbase job.
IF EXIST %BASE_DIR%\Trigger\Full_Build_Started.txt (
Echo "Full Build started"
) else (
     IF EXIST %BASE_DIR%\Trigger\Custom_Build_Started.txt (
     Echo "Custom Build started"
     ) else (
          IF EXIST %BASE_DIR%\Trigger\Post_Build_Batch_Started.txt (
          Echo "Post Build started"
          ) else (
          IF EXIST %BASE_DIR%\Trigger\Start_Full_Build.txt (
          Echo "Trigger found starting batch"
          MOVE %BASE_DIR%\Trigger\Start_Batch.txt %BASE_DIR%\Trigger\Full_Build_Started.txt
          call %BASE_DIR%\Scripts\Batch_Files\Monthly_Build_All_Cubes.bat
          ) else (
               IF EXIST %BASE_DIR%\Trigger\Start_Custom_Build.txt (
               Echo "Trigger found starting Custom batch"
               MOVE %BASE_DIR%\Trigger\Start_Custom_Batch.txt %BASE_DIR%\Trigger\Custom_Build_Started.txt
               call %BASE_DIR%\Scripts\Batch_Files\Monthly_Build_All_Cubes_Custom.bat
               ) else (
                    IF EXIST %BASE_DIR%\Trigger\Start_Post_Build_Batch.txt (
                    Echo "Trigger found starting Post Build batch"
                    MOVE %BASE_DIR%\Trigger\Start_Post_Build_Batch.txt %BASE_DIR%\Trigger\Post_Build_Batch_Started.txt
                    call %BASE_DIR%\Scripts\Batch_Files\Monthly_Post_Build_All_Cubes.bat
)So this bat file if it finds Start_Full_Build.txt in the trigger location, it'll rename that to Full_Build_Started.txt and will call the Full Build (likewise for custom and post build)
Regards
Celvin
http://www.orahyplabs.com

How to kick off workflow from Web Dynpro?

Hi,
I have abap experience but haven't used workflow before. I have to kick off a workflow from a java web dynpro.
I think that I need to set up a business object and an event within this object, as step one. I then go to Status Management in the Business Workflow as I need to establish a relationship between the web dynpro and my event, step two.
The question is, what Status Object type do I use in this Status Management? For example if I was releasing a production order I could set this to ORH.
Any advice greatly appreciated.
Regards,
Warren.

Hello Warrenabap,
Do you know how to send (or modify) the container values from a workflow ??

Kicking off a workflow via Event

Hi. How do you kick off a workflow via Event? I created a simple workflow with start--assign--stop. I created an event and subscription but when i raise it nothing happens.
the workflow though runs when i use the launch process. What am i missing? I read an article that says the start node should be a receive event, but i couldnt find that in the owb workflow builder.
Thanks for you help in advance.

I think you could start your WF by setting the viewOptions.process attribute to your WF name, in the User Form you are using. When the WF is finished, control returns to the Form.
For instance.
<Field name='viewOptions.process'>
     <Default>
         <s>My Load From File WF</s>
    </Default>
</Field>

What is twin sing? what kick off in implementation project

Similar Messages

Maybe you are looking for