What is wrong with my actions?

I am trying to use an action that I created several years ago and have used numerous times. The action seems to just open the file and stop...not playing through each of the steps in the action. So what happens is that I end up with all of the files that I wanted to batch convert, open with nothing else in the action completed. The steps in the action (including the "open" step, don't appear to be running (highlighted when the action plays). I have tried recreating the action, and it still doen't work...any ideas?
HELP!
Clem
I am attaching a screen shot of the action and a screen shot of the batch screen.

wow...I SWEAR I tried that, but that seems to have done the trick....man do I feel stupid!
Clem

Similar Messages

What is wrong with this action?

sometimes when using this action as a batch operation, it misses a step somewhere and applies the changes to the inverse of the desired selection, or maybe also just not at all. it occurs with a frequency of around every 25 or 50 images. should i record the action differently? is it a bug? here is how it appears in the action palette:
=====================
convert mode:
to: rgb color mode
set selection:
to: 3.15 inches 3.573 inches / tolerance: 65 / with anti-alias / without contiguous
inverse
refine edge:
radius: 1 pixel / contrast: 0% / smooth: 3 / feather: 0.5 / nudge: 100%
inverse
curves:
preset kind: custom / adjustment: curves adjustment list / curves adjustment / channel: composite channel / curve: point list / point: o, 110 / point: 218, 255
levels: using saved leveling
save: to tiff (or i tried also jpg)
====================

yeah, they are all the same size. what i ended up doing was to re-record the action on each offending image and then try that new action again on the whole batch. it took like three tries, but eventually it worked. i still don't understand *why*, though. slight variations in where i originally 'click' with the wand tool. maybe there is some way to 'click' the image without actually logging a specific pixel? 'select all' doesn't work... i will need the same operation again, so hopefully my saved action will work on a new folder of images.

What is wrong with as3

this is not a question about 'how i do X'. is rather a 'discussion' (flame or whatever, but to defend or argue about aspects, not people) about 'what is wrong with as3' and what aspects whould be taken into consideration for updates. right now i am using as3, and since i paid for this license, i choose this tool over some alternatives and i am using it to do stuff for other people who pay me to do it, i think it can be helpful for all of us if some actions are started in the right direction. i have already posted about 'all people in adobe are dumbasses that do not know how to make a scripting tool and are messing up my work', but i was pissed at the time (i still am pissed) but i believe this is not the right aproach. instead, if this goes to the right people in adobe, we all may get something in the future, like better and easier todo apps and web presentations.
pre: not only about the as3 specification, but COMPLY with the specification that you set. for example, some time ago there were problems with matrix transforms. this was corrected later with a patch. but this means it is not even doing what is is supposed to do
1. scriptable masks and movement, sprites and child sprites: there is a sprite with a mask, the mask is a shape drawn via script, something like
somemask=new shape();
somemask.graphics.beginfill();
(...etc)
somesprite.mask=somemask;
just like that. now add some child sprites to 'somesprite', and make 'somesprite' move, scale and rotate. there you will have something like a kaleidoscope, but not what you expected to do with your script. as the child sprites move in the parent mask, you will see that the child sprites appear or dissapear kind of randomly, and if the child sprites are textfields, it may be that the text is rendered outside the mask, or partially rendered outside the mask (as in only part of the text), rendered with the wrongf rotation or in the wrong place. some child sprites are clipped correctly, some dissapear totally when only a part should dissapear (clipped) etc.
way around: have not tried it yet, but i have the impression that bitmaps have different criteria for clipping, so i am thinking of trying this: appli an empty filter (a filter with params so it does not have any effect on the sprite or in the textfield) so the sprite is rendered as bitmap before doing anything else with it. as i said, i have not done it yet, but it may be a way around this problem, to avoid all this inconsistency with clipping
1-b. inconsistency between hierarchy and coordinates, specially masks: you apply a mask to a sprite, yet the sprite has a set of coordinates (so 'x' in the sprite means an x relative to its container), yet the mask applied to the very same sprite, as another reference as reference for coordinates (like the stage)
2. painting via script: in any other languaje, in any other situation, something like:
beginFill(params);
(...stuff 1)
endFill();
beginFill(params);
(...stuff 2)
endFill();
(...etc)
means: render region of block 1, then render region of block 2 etc, and no matter what, it should be consistent, since there is noplace for ambiguity. if you read it, you may think what that means, even if you dont run it you may have an idea of the picture you want to draw, but not with as3. as3 somehow manages to screw something that simple, and mixes all the blocks, and somehow uses the boundaries of one block as boundaries for other block. is like all blocks are dumped into whatever, and then uses all lines defined into it as boundaries for a unique block. it changes all boundaries and generates inconsistency between what is shown and redraw regions of the resulting picture, like lines that go to the end of the screen and then dont go away in the next frames, even tough the beginfill endfill block should prevent it
3. event flow: i dont know what was the policy behind as3 event flow design. it is in no way similar or an extension to previous event flow, neither with any event flow in any other plattform. i dont know how most people start with as3; in my case, i unpacked, installed and when i tried to do something with what i already knew i could not, so i started reading the as3 docs, and since is like 800 pages long, i just read the basics and the rest i would 'wing it'. in the part of the event flow, there was something about bubbling and stuff, it was not clear at all and when i tried to do what is was said in the documentation (like preventing events to 'bubble', as is called in the documentation), i could not see any effect but i could see it was a mess. flash is not the only thing out there to work with pictures or to work with mouse events, but is the only one that deals with things like 'target' and 'currentTarget'. my first experience on needing this was when i was dealing with my own event handlers (so the only thing that had control over mouse was the stage, and i would admin everything via script). there were events generated everywhere, the stage got events that were not genrated directly over the stage, but got there not with stage coordinates but the coordinates relative to the sprite that generated the event. so if i hover the mopuse over the stage, and the stage has some things on it how does it work? i get multiple event calls, like it was hovering multiple times over the stage in a single frame, but in each call with different coordinates? and what if i set all child sprites as mouseenabled=false or compare like 'if (event.target != event.currenttarget)', what if i move the mouse over a child, does it prevent the move mouse event at all? or does it filter only the event call with only stage coordinates? in my case, every time i move over another clip (with mouseenabled = true), the stage gets it as 'mouse up', even tough there was never a mouse release, what the hell? do even the people at adobe know how to handle events with their own tool when they require it? why does an event 'bubble' when i have not specifically tell it to do it? mi thought is that this event flow was very poorly conceived, and tough the intention may have been that there were different cases and it shopuld cover all cases, they actually introduced new problems that were not present in traditional ways to handle it, and it is neither the easier way to handle things, and this way, a very simple problem turns into a very ugly thing because it must handle things that were not neccesary to handle, or were implicit in other situations.
4. legacy: since as3, all interaction is different, and if you want to do things in the new plattform, using the new features, what you already knew just goes to the garbage can. when a new tool arrives, it should be an extension to previous tools (which is a reason to update instead of just buying a new tool from a different vendor). if everything i had or knew just means nothing from now on, then i can not say 'i know flash script', and my previous knowledge gives me no advantage when aproaching the new version. as3 is a new aproach that requires doc reading and stuff, even if you knew something about previous as specifications or other oo languajes. if you decide to change things from now on, like the things mentioned in this post, instead of just throwing away everything the users alerady knew about the tool, do like in java releases, they mark some things as 'deprecated', they keep working as they should, give a warning, but also a message saying this feature is deprecated, we suggest you use this library instead.
5. lack of previous functionality: if you 'update' something, it meand all previos functionality is still there (probably improved, but not with bugs if it was working fine), plus something else. now it seems backwards, there are some things that could be done in previous versions but not in this one, like 'duplicatemovieclip'
6. inconsistency with scripting/programming paradigms: (ok, fancy work, but fits perfectly here): as3 proposed ways to handle things, but the people who designed it got 'too creative', and they did something that is not consistent neither with previous versions of as or with other languajes. the documentations is full of things like 'it looks like x languaje or languaje family, but instead of using XXX word, you must use YYY'. great, what is this? namespaces 'work like', but 'differently' for example from java, .net, .c. its got the idea that a namespace means a grouped functionality but there are rules about where should be placed the file (ok, java has this also, .net takes care of it automatically if all files are registered in the project), but what you got is a mess that 'if you know other languajes you got the general idea, but nonetheless, even if you knew this or previosu versions of as, you still have to read whatever we decided arbitrarily just to be different'. namespaces, event handling, vars definition which is not like previous scripting neither like fully typed languajes.. is just a mess.
7. lack of scripting and graphics integration: unlike flash and adobe tools that just got on the graphics side leaving all the scripting integratuion apart, most tools from other vendors integrate very well interacton with what is on the screen. the script editor: very poor. autocompletion? a drop down list that does not heklp at all, appears in the wrong places, and when you need it to go, it does not go (so if i want to move away from the uncalled drop down list, i have to click somewhere else, making developement slowewr instead of helping, so the drop down list does not capture all events when i dont want to). in other ides you double click somewhere and it will go to the part of code relevant to that event or whatever. for example microsoft tools, ok i am antimicrosoft, and one of the reasons was that when windows 95 got to market proposing itself as the ONLY pc os you could use if you wanted to keep useing the apps you already had, it was a lousy product full of flaws but you had to keep using it because you had no choice. what is so different from what is happening with flash just now? yet the ide of c# is awesome, works very well and seems reliable.
adobe people: not all user are designers that just make pretty pictures. if it is not intended for scripting then why is it there. and if there are corrections to be done, they should patch all versions, not only the last one. previous version users also paid for their versions.

Well, there is no point in arguing.
I personally believe AS3 does exactly what it promises to do within limits (read: reasonable limits) of ECMA type of language. And sometimes it doesn’t do what we expect it to for it cannot possibly emulate everyone’s thinking process. The task, I guess, is to learn to think in terms of AS3 – not to try to make AS3 think like us. No language covers all the grounds. And no, it is not Java - with no negative or positive connotation. It is what it is. Period. I just hope that AS5 will be more Java like.
You are right about the fact that it is not necessary to know all the aspects of language in order to perform the majority of tasks. But it is paramount to have a clear idea about such fundamental concepts as display list model and events. For instance, depth swap has no meaning in terms of AS3 because display list object stacking is controlled automatically and there is no need for all these jumping through hoops one has to perform in order to control depth in AS2. There no more gaps in depths and one always know where to find things.
Similarly, there is no point in having duplicateMovieClip method. More conventional OOP ways of object instantiation accomplishes just that and much more. Just because OOP object instantiation needs to be learned doesn’t mean past hacks have place in modern times. duplicateMovieClip is a horse carriage standing next to SUV. What one should choose to travel?
Events are implemented to the tee in the context of ECMA specifications. I consider Events model as very solid, it works great (exactly as expected) and never failed me. True, it takes time to get used to it. But what doesn’t?
By the way, speaking about events, contrary to believe in Adobe’s inconsideration to their following. Events are implemented with weakly reference set to false although it would be better to have it set to true. I think this is because there are smart and considerate people out there who knew how difficult it would be for programming novices to deal with lost listeners.
I think AS3 is million times better than AS2. And one of the reasons it came out this way is that Adobe made a very brave and wise decision to break totally loose from AS2’s inherent crap. They have created a totally new and very solid language. If they had tried to make it backward compatible – it would be a huge screw up, similar to how our friends at Microsoft are prostituting VB and VBA – extremely irritating approach IMHO.
Also, Flash legacy issues shouldn’t be overlooked. Flash did not start as a platform for programmers. Entire timeline concept in many ways is not compatible with the best OOP practices and advancements. I think for anyone who is used to writing classes the very fact of coding on timeline sounds awkward. It feels like a hack (and AS2 IS a pile of hacks) – the same things can be nicely packaged into classes and scale indefinitely. As such I wouldn’t expect Adobe to waste time on hacking timeline concept issues by making smarter editor. They have made a new one – FlexBuilder – instead. Serious programmers realize very soon that Flash IDE is not for developing industrial strength applications anyway. So, why bother with channeling great minds into polishing path to the dead end?
I would like to state that all this is coming form a person who knew Flash when there was no AS at all. And I applaud every new generation of this wonderful tool.
I believe Adobe does a great job making transition from timeline paradigm to total OOP venue as smooth as possible. And no, they don’t leave their devoted followers behind contrary to many claims. They are working on making developing Flash applications as easy as possible for people of all walks. Welcome Catalyst!
Of course there is not enough information about AS3 capabilities and features. But, on the other hand, I don’t know any area of human kind activities that does.

What's wrong with the server?

execute me ~what's wrong with the server? I can‘t use the command nohup any longer.Can somebody help me?
root@shhis1new # nohup
Segmentation Fault (core dumped)
root@shhis1new # nohup ls
Segmentation Fault (core dumped)
root@shhis1new # nohup /opt/SUNWexplo/bin/explorer -w all &
[1] 6871
root@shhis1new #
[1]+ Segmentation Fault (core dumped) nohup /opt/SUNWexplo/bin/explorer -w all
root@shhis1new # uname -a
SunOS shhis1new 5.9 Generic_122300-19 sun4u sparc SUNW,Netra-T12
System Configuration: Sun Microsystems sun4u Sun Fire E2900
System clock frequency: 150 MHZ
Memory size: 49152 Megabytes
Best Regards
<email address removed by moderator>
Edited by: 884082 on 2011-11-22 下午10:00

Moderator Action:
You email address has been removed from your post.
You wouldn't want bad people to send you spam messages for the rest of your life, eh?
Moderator Advice:
If this is the same E2900 that you have mentioned in every one of your other forum posts, then it would seem you need to contact Technical Support and open a proper support request. These forums are NOT techsupport and that system seems so poorly configured that it needs deep analysis. Such investigation cannot be done by using an online forum.
The immediate solution is to log on to the SC of that box and power it down, then boot it back up. At least it will be running after that.

What's wrong with my syntax?

I'm getting an error with this. What's wrong with my syntax?
Error: Scene 1, Layer 'actions', Frame 1, Line 21 1084: Syntax error: expecting rightparen before semicolon.
// Line 21
holder.load(new URLRequest("Interactive_StrategyMap.swf" + "?random=" + Math.random();));

Hi Ned,
I'm trying to force my preloader to load the .swf every time. I do not want it stored in cache (because I'm trying to solve the issue where the dynamic text doesn't load on refresh)
So, I've added this math.random to the end of the string... but now the preloader .swf apparently can't see the .swf I want it to load because the path is Interactive_StrategyMap.swf?random=123 instead of Interactive_StrategyMap.swf
The error I get is:
completeHandler: Interactive_StrategyMap.swf?random=123
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
My full code is:
//THIS IS THE PRELOADER CONTAINER THAT LOADS THE INTERACTIVE
//STRATEGY MAP (Interactive_StrategyMap.swf).
// CREATE A NEW LOADER OBJECT TO HOLD THE LOADED CONTENT
var holder:Loader = new Loader();
var myString:String = "Interactive_StrategyMap.swf" + "?random=123" + Math.random();
addChild(holder);
// CREATE EVENT HANDLERS TO TRACK THE LOADING PROGRESS
// AND TO TRACK THE COMPLETION OF THE LOADED CONTENT
holder.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, onLoading);
holder.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
function onComplete(e:Event):void {
this.loadingClip.visible = false;
function onLoading(e:ProgressEvent):void {
var pcent:Number = e.target.bytesLoaded / e.target.bytesTotal * 100;
loadingClip.loadingText.text = int(pcent) + "%";
// LOAD THE EXTERNAL CONTENT
holder.load(new URLRequest(myString));
trace("completeHandler: " + myString);

What's wrong with my script?

Can someone please look to see what's wrong with my
navigation bar here:
http://www.simple-it.us/index2.html.
The links don't work.
At the top of the page you can download my files.
If you figure it out, please tell me in laymen's terms. Flash
is NOT my forte!
Thanks!
Michelle

Click on the top frame and open the actions window:
btn_home.onRelease = function() {
btn_home.getURL("");
The getURL needs a url inside of the quotes - something like
index.html

What's wrong with my browsers?

When i first got my macbook the internet was going really slow but then i changed the dns server to 4.2.2.2 and sometimes change it to 4.2.2.1 and the internet got better but now my browsers are acting funny.
One moment i'm surfing webpages with safari or firefox.... Chatting with AdiumX or MS Messenger... and suddenly it just stops... Msn is getting time-out's, Safari says I'm not connected.
But Airport sais it is still connected to my wireless network (with all the black bar's filled). It has valid IP adress etc, But everywhere I want to go on the internet it sais I'm not connected.
When I disconnect the airport en let it reconnect with my wireless network, the connection is fine.
how can i fix this?

Most users shouldn't be manually entering DNS addresses, and those DNS addresses you mention probably aren't intended for end users. Is Level3 your ISP?
That doesn't answer 'what's wrong with my browsers?', but a good start would be to configure your network according to your ISP's instructions. If you have DNS problems then, you might try using OpenDNS.

What's wrong with networking since Leopard?

Hi,
I'm with Mac since years. I was a PC User once and spent hours with all kinds of network troubles. What convinced me with Mac right in the beginning was easy networking: It just worked!
But since Leopard things got worse: I have several MBP's, iMacs, Airport Extreme's and Airport Express's at different places which I installed, and I face the same problems at EVERY place:
- I can't connect to AExtreme for several reasons: timeout, security incompatibility, ...
- Sometimes only two Macs are allowed to connect to one AExtreme
- Airport doesn't find Aiport or any other networks for minutes
- After connecting to the router, can't get an IP (self-assigned IP only) - other PCs get an IP.
- Aiport Extreme crashes (yellow blinking)
- connection loss (even when AExtreme is very close)
Now I know about networking, about configuration, I've done this for years. Whatever I do, problems disappear and appear again, at different times, at different places with different hardware.
What is wrong with Leopard? Such problems remind me of times with Windows98 and stuff like that.

What's wrong with networking since Leopard?
on my network and many i have setup there have been no problems with leopard. However there are always teething problems with new operating systems. Thankfully with leopard only a tiny percentage of users experience technical difficulties.
can't connect to AExtreme for several reasons: timeout, security incompatibility,
is it set to use WPA/WPA2
Airport doesn't find Aiport or any other networks for minutes
sometimes my macbook pro takes a while to show up any networks if there are lots in the area this is because it is scanning them all.
After connecting to the router, can't get an IP (self-assigned IP only) - other PCs get an IP.
What kind of router are you using? What happens if you powercycle the router?
# Aiport Extreme crashes (yellow blinking)
# connection loss (even when AExtreme is very close)
Have you tried resetting your AE to default. reinstalling its firmware or checking for a firmware update?
Have you tried changing hte wireless channel your networ is broadcasting on?
What is wrong with Leopard? Such problems remind me of times with Windows98 and stuff like that.
Did you upgrade install your leopard installation or did you do clean (erase) installations?
Have you tried created new network locations?

What's Wrong with My Computer?

I have a G5 desktop computer, I believe it's referred to as a "Power Mac." My mom purchased it some years ago, I think in late 2005 shortly after this particular model was on the market.
Info is:
Version 10.5.8
Processor 4 x 2.5 GHz PowerPC G5
Memory 4.5 GB DDR2 SDRAM
Hard Drive 240 GB (127 GB unused/available)
My mother wasn't using this computer for many years, and my 13" Macbook was giving me trouble, so she gave this one to me. It's all been great (she maxed out the memory and hard drive space when she bought it, even though it is outdated and insignificant compared to current models), except for one little thing... Browsing the internet is usually fine when it's only one window, but not always. However, it is almost a guarantee that while trying to operate multiple windows and trying to play a video, Safari will crash. And not just once in awhile. I'm talking about on a daily basis. During regular offline computer use, like Photoshop or iTunes, the computer will sometimes grey over (as if someone put a fairly thick grey film over the entire screen), and tell me I have to restart the computer. So what's wrong with it? I presume it is a physical issue (failing memory, mother board, etc.), but what?

Your computer is not remotely "maxed out" with RAM.
You're describing a G5 Quad like mine (though mine was built in June of 2006), and maxed out means having 16 GB of RAM installed, like mine has.
The Frolick wrote:
…the computer will sometimes grey over (as if someone put a fairly thick grey film over the entire screen), and tell me I have to restart the computer. So what's wrong with it?…
That's called a Kernel Panic, and, yes, it is most often caused by hardware problems, such as bad RAM or mismatched RAM. I can't imagine how you get to 4.5 GB of RAM without exponentially increasing the risk of mismatched RAM.
RAM has to be installed in matched pairs, starting from the center slots and spreading outward: 4*3*2*1*1*2*3*4
On the other hand, my own personal experience has led me to conclude that Safari is a piece of cr@p. It causes problems just being active in the background, causing other applications to fail.
Check your RAM carefully, starting with just one pair of matched RAM sticks in the two center slots, then adding one pair at a time. Check your hard disk with Apple's Disk Utility.
The kernel panics can be caused by a damaged directory too, so if you own Disk Warrior, run it. If you don't own DiskWarrior, at least Repair Permissions with Apple's Disk Utility and use Verify Disk/Repair Disk with it.
I'd also recommend downloading and installing Applejack and run it according to the instructions.
Good luck.
2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.

What's wrong with my iPod's Cover Flow??

I have an iPod Touch 3rd Gen, 32Gb, and recently updated to IOS 5.
Since then, the iPod's cover flow feature is extremely slow, doesn't flow smoothly, and crashes after a few (15-20) seconds.
Today I noted something else: some album covers appear pixelated and blurry, even though HD. Those covers looked just fine until now.
As a side note, I have in use 30 of the 32 Gb (that's a lot of music, I know). Could this be related? I never had those problems before IOS 5, though.
What's wrong with my iPod?
Thanks for your help!

so as I see it people with this problem have 3 options
- Make all of your album art a maximum of 500X500 pixels
- Wait for an IOS update that fixes the problem
- Scrap ipods and buy another brand of music player
Using photoshop to do it with, it took me about an hour to resize, change, and resync all of my 1400 songs(86 albums)

What's wrong with my Final Cut Pro 7.03?

What's wrong with my Final Cut Pro 7.03?
I have just started up a new project.
Every time I try to ad a clip in top of each other a "general error" shows up. The sequence viewer turned red and it displays that I have to close and reopen the window to restore.
The only "new thing" I do - is the use/brand of camera.
Now I use the canon D5 mark 3 for my project (before D5 mark 2)
What's wrong??? Do I need to update my Final Cut Pro 7.0.3 And how do I do this???
Final Cut Pro 7, Mac OS X (10.6.8)

Did you use Log & Import? Or did you at least convert the D5 files before importing? FCP doesn't work with those files natively.
-DH

What is wrong with this code? on(release) gotoAndPlay("2")'{'

Please could someone tell me what is wrong with this code - on(release)
gotoAndPlay("2")'{'
this is the error that comes up and i have tried changing it but it is not working
**Error** Scene=Scene 1, layer=Layer 2, frame=1:Line 2: '{' expected
     gotoAndPlay("2")'{'
Total ActionScript Errors: 1 Reported Errors: 1
Thanks

If you have a frame labelled "2" then it should be:
on (release) {
    this._parent.gotoAndPlay("2");
or other wise just the following to go to frame 2:
on (release) {
     this._parent.gotoAndPlay(2);
You just had a missing curly bracket...

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?
I have a two and half year mac book pro... I've had some issues with the screen looking scrambled when I quit certain applications, but now it's turned into something worse. I'll be working on my computer and the thing will freeze. When I force restart, the first screen, the apple logo, will be a blue tint and won't boot up normally. Then I try safe mood and it will then boot just fine. But there are blue stripes on my screen. The screen alternates from a blue tint to normal and if the computer freezes again the screen will become completely blue with black stripes. I haven't tried reinstalling my software because I don't have the startup discs that came with my computer. If I was sure that would fix it I would purchase them, but if it's a hardware issue I'm afraid that I'm screwed. I've been able to successfully get the blue off my screen by putting it to sleep and then waking it up, but that's not working well anymore either.
Does anyone else have experience with this? Is it the firmware or what? I have a MacBook Pro from early 2011 and I'm running Mac OS X 10.6.8.
Please help... Thanks!

I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

HT3228 When I try to send an email from my Iphone it will not send and tells me the recepient will not allow relaying. The email will sit in my outbox and then at some point will send. It sometimes takes days. What is wrong with my settings?

When I try to send an email either new, or reply on my phone I receive a notification that recepient will not allow relaying. The email will then sit in my outbox. At some point it will send but it is hardly dependable. What is wrong with my settings?

The collum to the right listed similar problems. The solution appears to be that under smtp outgoing settings the user name and password are listed as optional. I have not plugged in the information and it seems to be working. However from my office it always allowed the relaying. The true test will be when I try to respond later from the road.
Thank you for your help.

TA21328 every time I use Safari I receive a message that says Safari is no longer responding because of a script problem with the website and I must press "continue" for the page to continue. This happens with every website I go to. What is wrong with my

When using Safari I have begun to notice this box appearing as I try to reach any website: "Safari is no longer responding because of a script on the webpage and then it lists what ever web page I have tried to reach. It then asks me if I want to "stop" the script or allow it to continue. I must "continue" it in order to reach my web page/ If I press "stop" it just keeps coming back and back and I can't continue. What is wrong with my computer or Sarari or both?

chick --
Does it mention "Slow Script?

What is wrong with my actions?

Similar Messages

Maybe you are looking for