What it mean "225" in virsa_cc_config table entries ??
Please see below link
http://i303.photobucket.com/albums/nn153/S0002919350/virsa_cc_config_table.jpg
What is the meaning / use of entry 225 in VIRSA_CC_CONFIG Table
Rgds
Please do not consider this Question as answered. i am closing this message as SDN will not allow me to have more open questions.
Rgds
Similar Messages
-
Table entries in the transport
Hi,
What are the steps to add Table entries(SM30) in the transport?
I have added the entries using SM30 for the table, but it doesnt appear in the transport request.
Please help.
Thanks & regards,
YogitaHi,
What I mean by 50 entries is:
for example,
In my transport there are 50 records for the table XYZ
Source system table XYZ = 50 entries
I want to move these 50 entries to TARGET system.
TARGET system table XYZ had few OLD entries , lets say 20 entries.
TARGET system table XYZ = 20 entries
With the transport of 50 entries + old 20 entries, I get all 70 entries in my TARGET system table.
But I want the table entries in TARGET same as SOURCE system entries that means 50 entries.
Is this possible? Is there any option with which TARGET system can have records only as per the transported entries?
Regards,
Yogita -
What is mean by "No entry for BW_USER in table RSADMIN availablea'
Hi All,
While creating Source system in my system i am getting this message "No entry for BW_USER in table RSADMIN available" , What is mean by this?
Reply back me to [email protected]
Regards,
Kiranhi Kiran,
means no aleremote user maintained for bw, you can maintain via rsa1->settings->global settings->glob settings enter bw user ale. normally ALEREMOTE is used.
Creating source system: No entry for BW_USER in table RSADMIN available
hope this helps.
oss note 410952
Symptom
You receive the error message when trying to connect a source system to the Admininistrator Workbench:
"No entry for BW_USER in table RSADMIN exists" (message number RSAR 059).
Additional key words
RSAR059, APO, RSADMINA
Cause and prerequisites
In table RSADMINA, the BW user is not maintained for ALE.
Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors. -
After downloading the latest version of iTunes and updating my iPhone, everytime I turn on my computer I receive a message that reads: "AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite.dll" Help! Does anybody know what this means and how I can fix it? Thanks.
Yes. I just solved the problem on my PC. Here goes...
Issue: My Windows7 computer was producing the pop up box with the error text as you described.
The Problem: You have another application on your computer that uses the like named .DLL file... in this case a DLL supporting SQLite on your local PC.
Solution:
1. You need to use the Windows File search feature to look for the name "SQLite". This will quickly locate the offending DLL in the other application.
2. Decide which program you like the most, in my case "Mobile Me", and uninstall the offending application.
3. Uninstall Mobile Me.
4. Restart your PC.
5. Reinstall Mobile Me.
6. Mobile Me should sync at this point, but if not, restart the PC once again.
In my case, the offending program was my Aptana Studio development application. I had recently the SQLite3 database to my Ruby On Rails configuration...
This is where the file was located:
C:\Users\<USERNAME>\Aptana Studio 2.0\plugins\com.aptana.radrails.sqlite3.win32_3.5.7.1278709071\vendor\SQLite3.d ll
I hope this helps,
Ron -
What does mean You can include static and dynamic tables into a Smart Form?
Hi guys,
If you check the official documentation for Smart forms in the Internet you will read that the initial pharagraphs of the text tell you "Tables - You can include static and dynamic tables into a Smart Form. Dynamic tables enable you to display tables whose size is determined only at the moment of their output by the number of the table items to be displayed". The link is the following: http://help.sap.com/saphelp_nw04/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm
I was wondering if this means that I can use field symbols with dynamical number of columns to print a smart form. Because it would be great since the customer wanted a dynamical report depending on the week day it was (If Monday, there was only 12 columns, but if Friday, it will be 52 columns (1 column more for every day elapsed in the current week)). I had to create 5 different forms, but I think using field symbols I had spent less effort. Do you know if it is really possible? If not, then what does mean "You can include static and dynamic tables into a Smart Form"?
Thank you in advanceHi ,
The concept of static and dynamic tables in smartforms, means you can use template- ( static table as no of rows and columns is fixed). Also you can use table- dynamic as the no of rows will depend on your line items.
Hope this will help you to close this thread.
Also, try to find this answer in posted forums. Creating a new forum everytime just increases the network traffic. So please try to avoid it.
Regards,
Vinit -
What does it mean .INCLUDE in the table ROOSOURCE?
Dear One's,
What does it mean .INCLUDE in the table ROOSOURCE?
Thanks,
RajHi,
.Include and .append are used for adding structures to a table. But the difference is when we use .append for adding a structure, the structure cannot be added to another table.But if we use .include, the structure can be added in any number of tables.
Regards,
Krishna. -
What are dyanmic internal tables and what s the exact use of forall entries
what are dyanmic internal tables and what s the exact use of forall entries?
hi,
<u><b>dynamic internal table.</b></u>
http://searchsap.techtarget.com/tip/1,289483,sid21_gci912390,00.html
http://www.sap-img.com/ab030.htm
<u><b>
FOR ALL ENTRIES</b></u> is an effective way of doing away with using JOIN on two tables.
You can check the below code -
SELECT BUKRS BELNR GJAHR AUGDT
FROM BSEG
INTO TABLE I_BSEG
WHERE BUKRS = ....
SELECT BUKRS BELNR BLART BLDAT
FROM BKPF
INTO TABLE I_BKPF
FOR ALL ENTRIES IN I_BSEG
WHERE BUKRS = I_BSEG-BUKRS
AND BELNR = I_BSEG-BELNR
AND BLDAT IN SO_BLDAT.
*******************************8
look another example
what is the use of FOR ALL ENTRIES
1. INNER JOIN
DBTAB1 <----
> DBTAB2
It is used to JOIN two DATABASE tables
having some COMMON fields.
2. Whereas
For All Entries,
DBTAB1 <----
> ITAB1
is not at all related to two DATABASE tables.
It is related to INTERNAL table.
3. If we want to fetch data
from some DBTABLE1
but we want to fetch
for only some records
which are contained in some internal table,
then we use for alll entries.
1. simple example of for all entries.
2. NOTE THAT
In for all entries,
it is NOT necessary to use TWO DBTABLES.
(as against JOIN)
3. use this program (just copy paste)
it will fetch data
from T001
FOR ONLY TWO COMPANIES (as mentioned in itab)
4
REPORT abc.
DATA : BEGIN OF itab OCCURS 0,
bukrs LIKE t001-bukrs,
END OF itab.
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
itab-bukrs = '1000'.
APPEND itab.
itab-bukrs = '1100'.
APPEND itab.
SELECT * FROM t001
INTO TABLE t001
FOR ALL ENTRIES IN itab
WHERE bukrs = itab-bukrs.
LOOP AT t001.
WRITE :/ t001-bukrs.
ENDLOOP.
Hope this helps!
Regards,
Anver -
What it means when psoprdefn table doesnot have PS user
what it means when psoprdefn table doesnot have PS user?
invalid access id and password for signon see your security administrator
getting this message please help!
Thanks,
kishoreCan you please describe what you are doing and about the oracle error that prompted.
Shafiulla Syed -
What to copy table entries from production to test
Hello!
After production client copying to TSTclient NNN the table Z* (concerned PA2001) was not copied completely...
How could I transfer Z* table entries to TSTNNN?
Via SCC8?
Is pa2001 also need to be copy?
Regards,
TonyaRefer to
[http://searchsap.techtarget.com/tip/0,289483,sid21_gci959527,00.html] -
What is meaning of highcardinology?
hi friends,
what is the meaning of high cardiniology?
regards
suneel.hi Suneel,
you must mean high cardinality,
please search forum, this question asked frequently,
or search help.sap.com
http://help.sap.com/saphelp_nw70/helpdata/en/a7/d50f395fc8cb7fe10000000a11402f/frameset.htm
High cardinality: This means that the dimension is to have a large number of instances (that is, a high cardinality). This information is used to carry out optimizations on a physical level in depending on the database platform. Different index types are used than is normally the case. A general rule is that a dimension has a high cardinality when the number of dimension entries is at least 20% of the fact table entries. If you are unsure, do not select a dimension having high cardinality.
hope this helps. -
Posix perf pack: Got Exception for fd: 'nn' with no corr. table entry
My log file is filling up with the following error on an HP9000 with HPUX 11.0
running WL 5.1 SP9 and JRE 1.2.2-06
<W> <Posix Performance Pack> Got exception for fd: '59' with no corresponding
table entry
Any help appreciated
Please cc my email if possible
Thanks
Ricky
In most cases, these errors can be ignored. Please open a support case with BEA and
report this problem along with a description of any observed side effects (if any).
-Charlie
Krish wrote:
I got an error thrown in the weblogic log shown below
<Posix Performance Pack> Got exception for fd: '126' with no corresponding table
entry
I guess it has something to do with the File Descriptor.I ahve the file descriptor
count set to Max(8096).
Does any one know what this means.
Krish. -
Got exception for fd: '126' with no corresponding table entry
I got an error thrown in the weblogic log shown below
<Posix Performance Pack> Got exception for fd: '126' with no corresponding table
entry
I guess it has something to do with the File Descriptor.I ahve the file descriptor
count set to Max(8096).
Does any one know what this means.
Krish.In most cases, these errors can be ignored. Please open a support case with BEA and
report this problem along with a description of any observed side effects (if any).
-Charlie
Krish wrote:
I got an error thrown in the weblogic log shown below
<Posix Performance Pack> Got exception for fd: '126' with no corresponding table
entry
I guess it has something to do with the File Descriptor.I ahve the file descriptor
count set to Max(8096).
Does any one know what this means.
Krish. -
What is the usage of for all entries ?
What is the Usage of read table after using for all entries ?
In the following example what exactly it is doing ?
Usage of 'for all entries' in Select Statement
FORM data_retrieval.
DATA: ld_color(1) TYPE c.
DATA: BEGIN OF T_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN,
MATNR LIKE VBAP-MATNR,
POSNR LIKE VBAP-POSNR,
END OF T_VBAP.
DATA: BEGIN OF T_VBFA OCCURS 0,
VBELV LIKE VBFA-VBELV,
VBELN LIKE VBFA-VBELN,
VBTYP_N LIKE VBFA-VBTYP_N,
END OF T_VBFA.
DATA: BEGIN OF T_VBAK OCCURS 0,
VBELN LIKE VBAK-VBELN,
IHREZ LIKE VBAK-IHREZ,
END OF T_VBAK.
DATA: BEGIN OF T_KNA1 OCCURS 0,
KUNNR LIKE KNA1-KUNNR,
NAME1 LIKE KNA1-NAME1,
END OF T_KNA1.
DATA: BEGIN OF T_MAKT OCCURS 0,
MATNR LIKE MAKT-MATNR,
MAKTX LIKE MAKT-MAKTX,
END OF T_MAKT.
SELECT likpvbeln likplifex likpbldat likpwadat likpwadat_ist likpkodat likp~lfart
likpkunnr likpvstel lipsposnv lipslfimg lipsvrkme lipslgmng lips~meins
lipswerks lipslgort lipscharg lipsvbelv lipsposnr lipsmatnr
lipsvbeln LIPSVGBEL LIPSVGPOS vbupkosta vbupwbsta vbupposnr vbup~vbeln
VBAKIHREZ VBAKVBELN VBAP~VBELN
INTO CORRESPONDING FIELDS OF TABLE it_itab
FROM ( likp
INNER JOIN lips
ON lipsvbeln = likpvbeln
INNER JOIN vbup
ON vbupposnr = lipsposnr
and VBUPVBELN = LIPSVBELN )
left outer join VBAK
on VBAKVBELN = LIPSVGBEL
inner join VBAP
on VBAPVBELN = VBAKVBELN )
WHERE likp~vbeln IN so_vbeln
AND likp~lifex IN so_lifex
AND likp~lfart IN so_lfart
AND likp~kunnr IN so_kunnr
AND likp~vstel IN so_vstel
AND likp~bldat IN so_bldat
AND likp~wadat_ist IN so_wadat
AND vbup~kosta IN so_kosta
AND vbup~wbsta IN so_wbsta
AND LIPS~LFIMG NE 0.
SELECT VBELN IHREZ INTO TABLE T_VBAK
FROM VBAK
FOR ALL ENTRIES IN IT_ITAB
WHERE VBELN = IT_ITAB-VGBEL.
APPEND T_VBAK.
ENDSELECT.
SELECT VBELN MATNR POSNR INTO TABLE T_VBAP
FROM VBAP
FOR ALL ENTRIES IN IT_ITAB
WHERE VBELN = IT_ITAB-VGBEL AND
MATNR = IT_ITAB-MATNR AND
POSNR = IT_ITAB-VGPOS.
APPEND T_VBAP.
ENDSELECT.
SELECT VBELV VBELN VBTYP_N INTO TABLE T_VBFA
FROM VBFA
FOR ALL ENTRIES IN IT_ITAB
WHERE VBELV = IT_ITAB-VBELN AND
VBTYP_N = 'M' .
SELECT KUNNR NAME1 INTO TABLE T_KNA1
FROM KNA1
FOR ALL ENTRIES IN IT_ITAB
WHERE KUNNR = IT_ITAB-KUNNR.
APPEND T_KNA1.
ENDSELECT.
SELECT MATNR MAKTX INTO TABLE T_MAKT
FROM MAKT
FOR ALL ENTRIES IN IT_ITAB
WHERE MATNR = IT_ITAB-MATNR.
APPEND T_MAKT.
ENDSELECT.
*Populate field with color attributes
LOOP AT it_itab INTO wa_ITAB.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
i.e. wa_ekko-line_color = 'C410'
REFRESH color.
colourize 'VBELN' 0. " .
WA_ITAB-farbe = color[].
ld_color = ld_color + 1.
Only 7 colours so need to reset color value
IF ld_color = 3. "8
ld_color = 1.
ENDIF.
CONCATENATE 'C' ld_color '10' INTO wa_ITAB-line_color.
WA_ITAB-NAME1 = ''.
WA_ITAB-MAKTX = ''.
WA_ITAB-IHREZ = ''.
WA_ITAB-VBELV = ''.
READ TABLE T_KNA1 WITH KEY KUNNR = WA_ITAB-KUNNR.
IF SY-SUBRC = 0.
WA_ITAB-NAME1 = T_KNA1-NAME1.
ENDIF.
READ TABLE T_MAKT WITH KEY MATNR = WA_ITAB-MATNR.
IF SY-SUBRC = 0.
WA_ITAB-MAKTX = T_MAKT-MAKTX.
ENDIF.
READ TABLE T_VBAK WITH KEY VBELN = WA_ITAB-VGBEL.
IF SY-SUBRC = 0.
WA_ITAB-IHREZ = T_VBAK-IHREZ.
ENDIF.
READ TABLE T_VBFA WITH KEY VBELV = WA_ITAB-VBELN.
IF SY-SUBRC = 0.
WA_ITAB-VBELVA = T_VBFA-VBELN.
ENDIF.
READ TABLE T_VBAP WITH KEY VBELN = WA_ITAB-VGBEL
POSNR = WA_ITAB-VGPOS
MATNR = WA_ITAB-MATNR.
IF SY-SUBRC = 0.
WA_ITAB-IHREZ = T_VBAK-IHREZ.
ENDIF.
wa_ekko-line_color = 'C410'.
MODIFY it_itab FROM wa_itab.
ENDLOOP.
ENDFORM. " data_retrievalhi Jyotirmoy,
The explanation below can give u an idea of wat is going in ur code..
Use of FOR ALL Entries
Outer join can be created using this addition to the where clause in a select statement. It speeds up the performance tremendously, but the cons of using this variation are listed below
Duplicates are automatically removed from the resulting data set. Hence care should be taken that the unique key of the detail line items should be given in the select statement.
If the table on which the For All Entries IN clause is based is empty, all rows are selected into the destination table. Hence it is advisable to check before-hand that the first table is not empty.
If the table on which the For All Entries IN clause is based is very large, the performance will go down instead of improving. Hence attempt should be made to keep the table size to a moderate level.
Not Recommended
Loop at int_cntry.
Select single * from zfligh into int_fligh
where cntry = int_cntry-cntry.
Append int_fligh.
Endloop.
Recommended
Select * from zfligh appending table int_fligh
For all entries in int_cntry
Where cntry = int_cntry-cntry.
Thankyou,
Regards. -
What is mean by index range scan and fast full scan
What is mean by the following execution plans
1)Table access by index rowid
2) Index range scan
3) Index fast full scan
4) global index by rowid
..etc
where i can get this information.In what situation CBO take these paths.Can you pls give me a link where i can find all these.I read these long time ago but not able to recollect
Thanks
AnandOracle® Database Performance Tuning Guide
10g Release 2 (10.2)
Part Number B14211-01
13.5 Understanding Access Paths for the Query Optimizer
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14211/optimops.htm#sthref1281 -
Table entries not getting displayed in desired format
Hi All,
In my adobe layout I created a table . I used data format Align Right and align middle for the table entries. In the Output some entries of the table are not displaying in align right and align middle.
Output:In the below output the first row data is not in desired format .
Thanks in Advance,
Suneel.Uggina.That is pretty to much information to help you.
You need to share your technical setting. How did you create the table? Subforms, Table-assistent... what are the values in? Format, what happens when you also pass more than 1 digit to the numbers in the first row, does it show up correct?
So please share more details and explain exact what you have tried to fix the issue. The community is able to help you, but not meant to suggest enaything you could have done.
~Florian
Maybe you are looking for
-
Help Creating a Graph (of sorts) for Professional Driver Daily Logs
Hey All! I'm working on a project for myself, that could go commercial if it gets as good as I'm hoping it will. This application (which I'm calling Truck Manager) will manage income and expenses, help plan trips, track trip/load information and do t
-
IChat Inline Images No Longer Working After a Fresh Install of Snow Leopard
My roommate and I share the same computer network and iChat through Bonjour. This is mostly for us to drop data to each other as we both work - urls, images, etc. He upgraded to Snow Leopard as a completely fresh upgrade and reinstalled his existing
-
04 inspection lot with status SPST
Dear Experts, We are using Handling Unit (HU) functionality in FG material, 1. We create HU's (say 50 HU's) using tcode COWBPACK, 2. On creation of HU, an inspection lot of type 04 is created for 50 HU's. 3. In regular scenario, we do GR of all 50 HU
-
How to insert a tumbler blog into muse web site?
Hey I was wondering if you know how to insert a tumbler blog into adobe muse? I have a tumbler account but would like to use it in adobe muse. how can I add it to my blog page in muse for desktop?
-
Exception Handling of Screenflows inside Processes
Greetings, We are currently encountering a problem where some unhandled Exceptions are not being caught in our BPM application. Whenever an exception occurs inside a process, BPM has provided a way of handling those exceptions by using the "Process E