What kind of database driver should use for database adapter in BPEL?
what kind of database driver (XA or non-XA) should use for database adapter in BPEL? I have only one database adapter and no JMS.
Thanks
Jo
Edited by: 799095 on Sep 30, 2010 8:35 AM
Hi
It depends on wheter you need XA transaction or not.
See http://www.theserverside.com/discussions/thread.tss?thread_id=21385 third reply.
If you only have one database and no synchronous dependency to the caller, non-XA should be OK.
-Johan
Similar Messages
-
What kind of storage we should use for oracle database?
Hi
thank you for reading my post
Can some one please explain what kind of hardware storage is common for oracle database, and kindly please provide some explanations about the reason that we can use such storage?Perhaps you're thinking about RAID, an acronym for Redundant Array of Inexpensive Disks? That's not specific to Oracle by any means, it's a very common way of setting up multiple disks in a server so that the failure of one or two disks doesn't cause the system to lose any data. If you're dealing with a server of any size or any sort of SAN or NAS device, it is going to use RAID, the question is which form of RAID (there are different sorts of configurations with different levels of cost, performance, and durability).
Justin
orafad was a faster typist than I.
Message was edited by:
Justin Cave -
What kind of external drive should I get for my macbook pro for backups etc
what kind of external drive should I get for my macbook pro for backups and storage
Hi, i have a Mercury Elite-AL Pro from OWC, www.otherworldcomputung.com
this is the one;
http://eshop.macsales.com/item/Other%20World%20Computing/MEAQ7S1TB32M/
have had this for over two years, moved around a lot with the drive, ( to date ) no problems, they have good after sales support; give them a call if you need info.
There are a lot of drives out there as others here will let you know, there are good NAME drives but they also fail, POPULAR drives also fail, select the one you are happy with for your system and how you plan to use.
i suggest if $ is not a problem get a big drive you will find someting to put on it and is better.
hope this helps. -
HT3500 i just want to connect with hp printer what kind of wire i should use
i just want to connect with hp printer what kind of wire i should use
Is your HP printer wireless? If so, no wire.
If it isn't plug it in using the cable it came with. Simple. -
EMERGENCY: what kind of jdbc driver should I use?
Suppose one machine with 9iAS standarv version installed, and another one with oracle8.1.6 installed. OSE is used for JSP and servlet engine. In this case, Oracle internal JDBC driver does not apply, am I right? Then what kind of JDBC should I used to access the database on the other machine?
thanks
nullYour have 4 driver options :
1) 2 from a client install
a) jdbc thin
b) jdbc oci with a client install
2) 2 from inside the JVM including the ose component.
a) server sdie internal(kprb) -- for inside the rdbms usage ONLY
b) server side thin driver.
Please review the following "overview" :
Overview of the Oracle JDBC Drivers
http://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/java.817/a83724/overvw2.htm#1000908
For server side jdbc connection the following information is also relevant :
It applies to java code in IAS 9i running in the Oracle jvm (including the ose) -- but not the apache jserv component.
JDBC in the Server: the Server-Side Internal Driver
http://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/java.817/a83724/advanc4.htm#1001042
i hope this helps .... -
What kind of virus protection to use for
wondering what kind of virus protection would be able to use although that the I'Macs has Melware and also what kind of security system would go good with a time capsule?
thanks
Richard Descoteaux Jr.Regarding the anti-virus software, see my Mac Malware Guide.
As for the security system for a Time Capsule, what kind of security system are you referring to? If you want your backups to be encrypted, see:
http://pondini.org/TM/31.html
If that's not it, you'll need to be more specific. -
What kind of inforobject can be used for compounding while creating charac
Hi all :
what kind of standard inforobject can be used for compounding while creating characteristic ?
I found that some could be , but some couldn't , like 0RESP_PERS.
THE ERROR :
1 Characteristic 0RESP_PERS was included in the compounding for COS09 (-> Long Text) QLong text exists
2 0RESP_PERS is just an attribute and is not allowed in the compounding No long text exists
0RESP_PERS is an object, why can't be used for compouning?
Could you please tell me why ?
Thank you very much!
Edited by: jingying Sony on May 10, 2009 7:05 AMHi Jingying Sony,
One can mark an infoobject as an Attribute Only in the General tab.
This means that the infoobject will only act as an attribute and cannot be used as a characteristic in infocubes. Neither can it be used as a navigational attribute and I guess it may not be available for compounding then(since in compounding - it implicitly becomes a characteristic).
For your ref
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
If you uncheck this checkbox, then may be it will allow you to compound this characteristic..
You may try with a (self created) ZRESP_PERS reference chararacteristic of 0RESP_PERS, to confirm this.
One more link for your reference
http://jgtang82.javaeye.com/blog/191795
Hope this helps,
Best regards,
Sunmit. -
Don't know what kind of application I should use to make this kind of proj.
I am going to make a project and I am not sure what kind of program would work for this document I want to make. The project I would like to make is of a type like a family tree, or a reverse sports playoff grid, where you start out with a few headers that branch out laterally and are linked with lines (just like a family tree graph) to many different headers. I want to have each of these headers as hyperlinks that you can click on to read more text/data/pictures about each header. I want to be able to add and edit it after I created it without major adjustments to the whole thing. Is this a clear question? Any help would be great. Thanks.
PowerPC G5 Mac OS X (10.4.2)
PowerPC G5 Mac OS X (10.4.2)Donna,
At a quick look at the omnigraffle webpage and I knew
that was excatly the application I was looking for
but did not know existed or where to find. Thanks a
ton for your input!
Also, it did not come with my prepackaged software.
Mrl
PowerMac G5s sold in the last 2 years or more all came with OmniGraffle.
Apple's G5 web page
If it's not on your G5, check the DVD that came with your G5.
Cheers. -
I need what kind of J2EE technologies should use to design apporval system
Hi,
I have to design and develop a java based approval system. Which are the best J2EE frameworks we can use for UI layer, Service Layer and Data Access layer to develop a approval system.
Can somebody suggest me, Right now i have some frameworks in my head
it's like Spring with Hibernate and JSF (for rich client).
So please help me out. Looking for a valuable information.
Regards,
Ravi.It's pretty funny to see the forums this question has been cross-posted to:
http://forum.java.sun.com/thread.jspa?threadID=5261669&messageID=10088590#10088590
http://forum.java.sun.com/thread.jspa?threadID=5261668&messageID=10088589#10088589
http://forum.java.sun.com/thread.jspa?threadID=5261667&messageID=10088583#10088583
http://forum.java.sun.com/thread.jspa?threadID=5261664&messageID=10088550#10088550
http://forum.java.sun.com/thread.jspa?threadID=5261663&messageID=10088548#10088548
http://forum.java.sun.com/thread.jspa?threadID=5261661&messageID=10088543#10088543
http://forum.java.sun.com/thread.jspa?threadID=5261658&messageID=10088534#10088534
Cross-posting is rude. One to a customer, please. If you must spread your
question around like this, post it to ONE forum and then put a link to it under
other topics.
You waste people's time when you do this, because someone answering under
one topic might be duplicating information that has already been provided
under another.
% -
What kind of hard drive should i buy to replace the one i'm using
I am currently using an iMac with the following:
Processor 3.06 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.5 (12F45)
I would like to replace the hard drive which is failing but don't know which kind to buy. Can I buy a bare drive or do i need a kit?
What brand is compatible with Mac? What type? Thanks for any help!christianpawlik wrote:
At peck I do not want to create a boot drive. When it comes cleaning my os from old stuff I perfer just to restart the enitre os from the installation of os.
Then 4G should do it (How to make a bootable Lion install disc or drive) -
What kind of hard drive should I get for video editing on my MacBook Pro
I work in film preservation, which requires a lot of rendering of DPX files.
I currently have a late-2009 MacBook Pro. It's having a lot of problems such as freezing and overheating, so I think it might be best to just replace the hard drive. Any tips on ssd vs hdd for quick rendering performance? Also, the optical drive is not functional so if like to use that as extra hard drive space as well.
Don't know too much about hard drives, and I'd really appreciate any help.
Thanks in advance!Thanks everyone,
The symptoms don't exactly correlate with the ones listed on the page about resetting the Systems Management Controller. Typically when I'm running a demanding program like After Effects or Compressor alongside Chrome, the screen will typically freeze up, though I retain control of the mouse. I can't click anything though, and it usually takes about a minute or two (after I've pressed command-option-esc) for the mac to start responding again. I think it's because I'm trying to make the mac do things it wasn't designed to do, such as run these processor-heavy programs. Lately it's also been freezing very frequently while playing Netflix. The movie just freezes, though I can still hear the sound continuing, and then in about a minute or two it will snap back to the currently playing part of the movie.
As far as overheating, I've made it possible for my mac to perform with these programs by either keeping it on an icepack or heavily ventilated with an exterior fan. It seems that after heavy bouts of using these programs though, the freezing frequency and seriousness is worse. If I don't keep the mac really well ventilated and it gets too hot, the screen just goes black, everything stops, and then in a few seconds it pops back as if nothing happened, running normally.
The model of my mac is:
MacBook Pro (13-inch, Mid 2009)
MacBookPro5,5
MB991xx/A
13.3"/2.53/2X2GB/250-5400
However, I did add some more RAM when I go the computer to help it along.
Thanks again for all and any help! It's very much appreciated. -
What kind of material did apple used for the MacBook Pro rubber feet?
One of my MacBook feet is loose. Now I try to fix it by DIY. The exact materialname of the rubber is important, because then I can use the suitable glue.
MacBook Pro: Bottom case foot replacement DIY instructions
If the name of the material is that important and not mentioned in the DIY, call Apple Care. -
External harddrive (also, what kind of internal drive does iMac use)
I was just wondering what kind of hard drive apple uses. I am getting an intel iMac soon and although I probably won't upgrade the harddrive now I may consider adding an external one later on.
My question is this: How come it is $300 to add 250 gigs internally on the machine? That seems like a lot of money to me(amateur)considering you can get external drives for almost half that. Is the quality that good, or is it just a matter of engineering?
Also, any recommendations of good external drives? Thanks!Dunebug38,
Apple uses different manufacturers for their hard drives. I have a Western Digital hard drive in my iMac. I know that Apple uses Seagate hard drives also, and likely others, as well.
I couldn't say why Apple charges so much to add the larger hard disk. Apple charges more for memory too, at least beyond 1GB.
As for external drives, I have two Other World Computing external hard disks, both of which have an OWC case and Western Digital 300GB drives. I bought the case kit and hard drives separately, and installed the hard drive myself (which is quite easy to do). These work flawlessly with my iMac. When you look for an external drive, I suggest that you look for a FireWire drive (or combination FireWire/USB 2.0), and be sure that it has the Oxford 911 bridge, as this one is known to work well with Macs.
I hope this helps.
Joe
iMac Intel Core Duo 20", 2 GB RAM, OWC 300 GB FW HD Mac OS X (10.4.6) eMac 1.42GHz, 1 GB RAM; iPod w/ video 30 GB -
HT201250 How do I find out what portable drive was the drive I used for Time Machine Backup?
Hi, I have 10.7.4 and need to figure out what drive I was using for Time Machine Backup. I have three drives and I have connected each of them to my macbook pro, but I get an error, "Time Machine Error, The backup disk is not available" when I hit the time machine icon on the top of the screen and the "backup delayed" prompt. If I try Back up Now I get message, "Time Machine could not complete the backup. Back up disk is not available." I am trying to figure out what the time machine back up would actually look like as a file on the drives but I don't see a folder/file name Time Machine. If I enter Time Machine I can see in the far right column, in purple, the last back up date (Sept. 12, 2012), but when I hit it nothing happens. In the Time Machine preference box the select disk has, in red and to the right, "Delayed" with an "i" within a circle, and the option indicates, "Next backup: when disk is connected."
I know I have a years worth of backups on one of the three drives, but I can't figure out how the heck to find them or how to determine what was the last drive I used for the backups within Time Machine. Help please.Hi, I have 10.7.4 and need to figure out what drive I was using for Time Machine Backup. I have three drives and I have connected each of them to my macbook pro, but I get an error, "Time Machine Error, The backup disk is not available" when I hit the time machine icon on the top of the screen and the "backup delayed" prompt. If I try Back up Now I get message, "Time Machine could not complete the backup. Back up disk is not available." I am trying to figure out what the time machine back up would actually look like as a file on the drives but I don't see a folder/file name Time Machine. If I enter Time Machine I can see in the far right column, in purple, the last back up date (Sept. 12, 2012), but when I hit it nothing happens. In the Time Machine preference box the select disk has, in red and to the right, "Delayed" with an "i" within a circle, and the option indicates, "Next backup: when disk is connected."
I know I have a years worth of backups on one of the three drives, but I can't figure out how the heck to find them or how to determine what was the last drive I used for the backups within Time Machine. Help please. -
What kind of adhesive does Apple use?
The bottom case of my TiBook is a little loose at the battery corner. When I type and rest my palms on the top case, it kind of "pops" or "clicks" a bit as the pressure moves the top and bottom cases together. It's not a big deal, but it's annoying enough to want to fix. I tried to get the folks at my local Apple repair center to deal with it under Applecare (I have about a month left.) They said it wasn't a warrantied problem, but they did offer to glue it for free. I didn't think that was a good idea, so I declined. I have since been told that Apple glued the bottom cases of the TiBook to the frame at the factory, so that would have been the appropriate repair.
If that's true, what kind of adhesive did Apple use for that, and exactly where was the glue applied? It must have been a prettty strong glue, and sparsely applied, as I didn't see any traces of it when I took the bottom off the computer. In any event, if gluing is the right move, I'd just as soon do it myself. The repair center would take at least a week, since they're usually so backed up. But I don't want to use anything that might damage the case or leak into anything.
Thanks in advance for your help.The metal skin is really glued around the edge by a plastic frame. It is this frame that holds the skin to the main frame and can give problems.
I had to open my ti case to install an airport card. I either did it wrong or the apple glue job was poor because the gray plastic trim around the edge of the metal skin had come loose over 50% of the circumference.
I had a commercial 3M rubber cement on hand so I used that. I applied it with a toothpick very sparingly (of course the rubber cement gets stringy so the job was a ittle messy).
I let dry in a warm room for 24 hours. The reason I did that was fumes from curing glue can be caustic and attack some very thin metals etc. I fugured I wanted to lose any fumes before I trapped them in the warm computer.
It worked well and I haven't had a repeat of the problem.
Maybe you are looking for
-
Aperture Not Working After Updating to OS 10.10.3
I have updated to the latest version of the OS and my legitimate copy of Aperture has been inoperable since the update. Apple has sent an email to everyone with a registered copy of Aperture stating that it still will work after the update but that i
-
Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.
-
when no sound is playing, all of the sudden the speakers start doing an static sound, very annoying, which only way of stopping it is if i play a sound in windows or if i disable/enable for example the mic line. I've just reinstalled the latest drive
-
Not getting any serrver nodes in SAP MMC
Hi experts, When I am trying to login to SAP MMC. Here I not getting anything under the server system. Its saying there is no items to show in this view. When i checked the eventviewer. Its showing this error. The SAPJ2E_01 service was unable to log
-
The class or interface 'flash.utils.ByteArray' could not be loaded.
Hi all, I am trying to use some of the new functionality that is available in AS3 and I keep getting an unfathomable error message. The code that I am using is at the bottom of this post. No matter what I do I keep getting the following error when I