What messages does it shows the integration engine(sycn/ asyn)?
What messages does it shows the integration engine(sycn/ asyn)?
Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
2. We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords
Similar Messages
-
Messages "to be delivered" at the integration Engine
Hi
Since Yesterday, we have a lot of messages with the status "to be delivered".
I have checked the SMQ1, the SMQ2 and nothing is there, but I saw 2 entries in SM58, blocked.
I deleted those entries but the system is still not working.
SMQR is showing the process as "inactive", and if I do not start it manually, it does not start automatically, but even starting it manually, nothing seems to happen.
I am unable to delete the firtst message that stays "to be delivered" its status is Cancelable No, Repeatable No.
The messages are in the Integration Engine.
I checked with no luck:
- Register Queues and Activate again the Queues
- Transaction SLDCHECK shows everything Ok
- AI_DIRECTORY_JCOSERVER , AI_RUNTIME_JCOSERVER and INTEGRATION_DIRECTORY_HMI seem to be Ok
- Stop and Start the SAP
- Refreshing the Cache
what else to check?
many thanksStatus: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
2. We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords -
Change status for 18 million messages in the Integration Engine
Hello there!
I have the following situation and I wonder that maybe you could help. Currently I have more than 18 million messages for the BC_XMB object in the Integration Engine for a BI System (connected to a PI system).
The problem here is that the archiving/deletion jobs in this BI system are faulty since maybe a couple of years ago and all of these messages are marked as "Archivable":
What I'm trying to do here is to change the status for these 18 million messages from "can be archived" to "to be deleted" since there is no way that I can archive this 18 million messages (filesystem capacity). I've been looking many option but I cannot figure out how to do it.
Maybe, if you know an alternative way to do this, I will be very pleased to hear it.
Thanks a lot in advance.
CarlosRaghu.
I've done the following:
1. I've executed SE38 tx code.
2. I've entered the "RSXMB_DELETE_MESSAGES" report as "Program"
3. As the "RSXMB_DELETE_MESSAGES" report does not have a selection screen, it must be executed with default parameters. So, I selected "Program -> Execute -> Background".
4. There are no available variants, so I clicked on the "Execute immed." button.
5. The job starts. I can monitor it on the SM37 tx code.
6. It only deleted 20 messages.
What I get from this, is that the "RSXMB_DELETE_MESSAGES" report cannot delete the big part of the messages since them are marked as "Archivable" and not as "Archived".
what do you think of it??
regards
Carlos. -
Auto Cancellation of Messages in the Integration Engine.
Dear all,
Issue: Auto Cancellation of Messages in the Integration Engine.
Description: Actually Today, I'm facing Problem in message mapping and its showing error "JCO_SYSTEM_FAILURE". Finally the message is Auto Canceled and showing the status in the Message Monitoring as Canceled with Errors.
I have doubt here how the messages are Auto Canceled with Error? Is there any system or ABAP program which cancelling these messages?
Waiting for yours valuable reply on the above issueu2026
Edited by: BhavinPatel on Oct 7, 2010 8:15 AMHi Bhavin,
Two report program are there to cancel error msgs automatically..
1) RSQIWKEX
2) RSXMB_CANCEL_MESSAGES
Regds,
Pinangshuk. -
appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?
ccooper52
check out the tips and video at the bottom of this link and see if any of it helps
http://www.allabouthomeelectronics.com/apple-tv-airplay.html
Apple policy requires we mention we might benefit or profit somehow by your visit
please let us know if this helped -
hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date
Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
what causes iphone 3gs every time I insert the SIM card does not show the screen or no service?
If the iPhone was unlocked unofficially, it has been locked to original carrier again.
-
My iphone does not show the option to share the internet, is an iphone 5 what can I do
I can not share the internet because my iphone 5 does not show the option, what can I do
Contact your wireless provider to see if they offer this feature,
and if there is a price to obtain the feature. -
my iPad does not show the Airplay icon. The software is iOS 7.0.4, I have home sharing turned on and have an Apple TV. What should I do?
If you don't see the AirPlay icon in the Control Center:
1. Turn off router, Apple TV and iPad
2. Turn on router and then wait 30 seconds for it to complete start-up process
3. Turn on Apple TV and then wait 30 seconds for it to complete start-up process
4. Turn on iPad (wait 30 seconds) and test AirPlay -
I updated my iPhone today over wifi. It downloaded 6.1.3 completely and started then installed it. After the install all it does is show the connect to iTunes screen. What did I do wrong and now do I have to completely restore the phone?
Next question.... I did an iCloud save point earlier today so in theory everything should have been saved and the restore won't be a complete loss right? Please tell me my pics aren't gone.....
Thanks for the help. -
I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?
iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.
-
Using the SOAP inbound channel of the Integration Engine
Hi,
I am following the blog of Stefan Grube.
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
However I have difficulties.
Is this blog still relevant for SAP PI7.10?
I have set this up as a test for a scenario I have.
Current Scenario NOT using your Blog and working perfectly.
SandBox PI Development PI
File > SOAP > SOAP > ABAP Proxy
What I am attempting now is.
SandBox PI Development PI
File > SOAP > Integration Engine > ABAP Proxy
I am using our SAP PI Sandbox to push a SOAP message using a Receiver SOAP adapter channel.
Transport Protocol: u201CHTTPu201D
Message Protocol: u201CSOAPu201D
Conversion Parameters: u201CDo not Use SOAP Envelopeu201D
Target URL: u201Chttp://<Integratio Server Host Development PI>:<Port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=FigmentD&Interface=urn:figment-co-za:fleetcard:efuel_50ppm^oa_Msg50ppm&QualityOfService=ExactlyOnce&sap-user=<PIAPPLUSER>&sap-password=<PASSWORD>u201D
SOAP Action: u201Chttp://sap.com/xi/WebService/soap1.1u201D
I am however getting the following error on the SandBox Pi AE.
u201CSOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 302 MOVED TEMPORARILYu201D
Please can you assist in this matter.
Regards
Willie HugoHi williem,
Stefans weblog works great. The error you are getting is some wrong data you are sending. Please verify the data you are sending is correct. Also check this threads for the same errror:
ADAPTER.HTTP_EXCEPTION / HTTP 302 Moved Temporarily
Re: SOAP client receives HTTP 302 Found
Re: Synchronous RFC-XI-Web Service with no request method
HTTP Error (302) Found when calling Web Service on XI
Regards,
---Satish -
Configurate the integration engine of an R/3
hi experts!
I need to configurate the integration engine of an R/3 receiver .... ( R3 SENDER>XI-->R3 RECEIVER )....in order to be able to see aynchronous messages (corrects an incorrects) and asynchronous messages (corrects), and honestly speaking i don't know hot to do it or the values that i have to chose.
the parameters that I have, are this:
ARCHIVE----
PERSIST_ARCH_MANUAL_CHANGES
ARCHIVE--PERSIST_DURATION--
ASYNC
DELETION-----PERSIST_DURATION--
ASYNC
DELETION-----PERSIST_DURATION--
SYNC
DELETION-----PERSIST_DURATION_ERROR--
SYNC
DELETION-----RELATED_OBJECTS--
ASYNC
DELETION-----RELATED_OBJECTS--
ROWS
DELETION-------ROWS_PER_LOOP
HTTP_PLAIN----SUPPRESS_URL_PARAMETER
IDOC----
EXTERNAL_MAPPER
IDOC----
SYNTAX_CHECK
IDOC----
XML_CONVERSION
MONITOR----
CCMS_MONITORING
MONITOR----
QRFC_RESTART_ALLOWED
PERF----
DAYS_TO_KEEP_DATA - -
AGGREGATION_ITEM
PERF----DAY_KEEP_DATA -
MEASUREMNT_ITEMS
PERF----
MAX_ENTRIES
PERF----
MEASUREMENT_LEVEL
PERF----
MEASUREMENT_PERSIST
RFCADAPTER----LOGGING
RUNTIME-------ACK_SYSTEM_FAILURE
RUNTIME-------CACHE_DIRTY_READ
RUNTIME-------ENGINE_TYPE
RUNTIME-------ENTRY_LOCK
TUNING----
EO_OUTBOUND_PARALLEL
TUNING----
EO_OUTBOUND_PARALLEL_SPLIT
TUNING----
IS_RETRY_LIMIT
and my actually configuration is this:
ARCHIVE PERSIST_DURATION ASYNC 2 1
DELETION PERSIST_DURATION ASYNC 2 1
DELETION PERSIST_DRATION SYNC 2 0
DELETION PERSIST_DURATION_ER SYNC 2 1
MONITOR CCMS_MONITORING 1 0
MONITOR QRFC_RESTART_ALLOWED 1 0
RUNTIME ENGINE_TYPE LOC UNDEFNED
RUNTIME IS_URL des:/XID
THANKS...Hi,
What you are searching for is only about RUNTIME category parameters. Try changing parameters LOGGING (for async) and LOGGING_SYNC from default to 1. You can also try some other parameters, you can search for the documentation for each one or just changing and testing.
ACK_SYSTEM_FAILURE
ACL_CHECK
CACHE_DIRTY_READ
CACHE_REFRESH_PACKAGE_SIZE
ENGINE_TYPE
ENTRY_LOCK
ERROR_ON_NO_RECV_FOUND
HTTP_TIMEOUT
IS_RFC_DESTINATION
IS_URL
LOCK_MESSAGE
LOGGING
LOGGING_AMF_ERR
LOGGING_PROPAGATION
LOGGING_SYNC
PACKAGING
QUEUE_COUPLING
RFC_DEST_QUEUE_COUPLING
TRACE_LEVEL
TRACE_LEVEL_PROPAGATION
regards.
roberti -
HT3529 Messages does not show Add Contact
Using iPhone 4S with iOS8. When I touch Details in a message, it does not show the Add Contact, and does not allow to change the name of a group.
Is this down to it being on the 4S?HI,
iChat and Messages can Display the pics that are in the Contacts/Address book list.
If you have Chat window is open in iChat then the View Menu Show Buddy Pics is the first port of call.
For Messages and iChat the next is the View Menu > Messages > Show Buddy Pics and Names.
The Show Pics and Names items also works for Buddy list in either app.
For AIM Buddies this will tend to be the On Line broadcast pic of the moment.
It can the pic in the Card in the Contacts List (Or Address Book)
In the case of your Own Pic this in fact can have been called from System Preferences > User and Groups (formerly Accounts) .
All of them can be changed individually, so for yourself in the Mac Account pic, the Contacts > My Card and Messages Buddy Pic can have different pics set to them.
I don't have a Facebook Account so I can't say if the Contact's pulling of Pics is what is causing them not to show in Messages.
I suspect the general option to display them is not On.
4:36 PM Friday; November 2, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
The Move/Copy option does not show the phones gall...
Hello,
I want to move some photos (wallpapers) to the phone's Gallery to use them for slide set but I can't do that... The Move/ Copy option does not show the phones gallery. It only shows the MMC, Games and My Apps. Please tell me what should I do.
Thanks.
Moderator's Note: Post was moved and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.Because you posted this message in a thread about the Nokia 301 before, are you about a Nokia 301 as well?
Nokia 301 » Menu » Apps » Files or Gallery » … » (do not open but highlight) your file » Options » Move. Did that help?
Maybe you are looking for
-
Digital camera no longer syncs to iMac 10.6.8
Hello, I have been using a Fuji Finepix E550 digital camera for years and for some reason tonight my iMac (running Snow Leopard) does not recognize it. I've never experienced this before. I've plugged the USB cable into the three different ports, a
-
Should I upgrade my G4 hardrive, or just get an imac?
This may seem like a silly question- but.. I'm not sure if its time to replace my trusty G4 yet, and I would appreciate any insight anyone might have. I use my computer mainly for photoshop, and the funny thing is that I honestly don't find my ( less
-
Adding a field in Web dynpro java in Travel Request application
Hi All, How to add a field in Web dynpro java in Travel Request application or can we copy the Web dynpro java application to Web dynpro ABAP and add a field. Experts, Can you please suggest me step by step in resolving the problem. Thanks & Regards,
-
Connected to Wireless Network, Not Connected to Internet...
Hi All I recently had my NVIDIA graphics card replaced as it freaked right out the other day. I took my MacBook Pro home yesterday and everything was perfect. It connected to my wireless network @ home as normal, and was functional all night. I have
-
Does the mac book air and mbp have problems
does the macbook air have problems and the same things for the macbook pro