What program must I use, if I want to program C

Hello, I study computer science and I want to know which programm I must use to prgram the speach C-Sharp on a Mac Book.
It would be great if anyone could help me
Thank you

My advice, install Windows using either a VM like Fusion, Parallels, or VirtualBox or using Boot Camp Assistant. Then install Visual Studio which includes C# development tools and framework.

Similar Messages

What adapter must i use to make a projection of an m4v-file (sound and images)

I have to make a presentation from an m4v-file. What adapters shall i use for sound?

PrintStream doesn't like the FileWriter, it's all squiggly. Oh, and I found the right event so that it updates every time i type a letter. So, what is this you say about making a FileOutputStream an attribute? I don't know what that means. I'm also not sure what you mean by listener, is that the PrintStream?
private void jTextPane1KeyTyped(java.awt.event.KeyEvent evt) {
FileWriter out;
PrintStream p;
try
out = new FileWriter("myfile.txt");
p = new PrintStream(out);
p.println (jTextPane1.getText());
p.close();
catch (Exception e)
System.err.println ("Error writing to file");}
}

What trigger should I use if I want to keep record amendment log?

I am a newbie to Oracle forms, I would like to raise a simple question here ... hope you won't mind ... I have a form interface which accepts user input to record attributes for an object (e.g. personal information of a user). Now, because the importance of data, I was required to write log records in a journal table for changes made on the data. What trigger am I recommended to place and use?
Thanks for any replies!

Duncan, thanks for your reply first. However, I have two queries:
1) Any generic event state to indicate change of record rather than 'POST-INSERT', 'POST-UPDATE' and 'POST-DELETE'?
2) Given that I use the 'POST' event, how can I get the pre-update value? (My log record is supposed to record the before-update value)
Thanks for your reply!

What compression settings to use from finalcut4.5HD to quicktime to toast?

I've been looking thru the forums and there are a lot of questions pertaining to this issue but I'm still having issues so here goes again...:)
I'm trying to burn quicktime movie files that I created in Final Cut 4.5HD onto a data dvd. When the files are created and played from the computer, they play fine. But when I burn them onto a DVD, a few of them are really jerky in motion and sometimes the video stops while the audio keeps going. I've been reading on Apple's forum that it may have to do with the compression or the data rate at which the file is created from FinalCut. Any suggestions on what export settings to use out of Final Cut?
I tried using - File - Export - Quicktime Movie (setting: current settings...include: audio & video...make movie self-contained)...created a .mov file but it was large and jerky on the data dvd when burned...
I also tried using the - File - Export - Quicktime Conversion option as well with different variations of the settings...(i.e. quicktime movie/mpeg-2/mpeg-4 with different compression types (dv/dvcpro-ntsc/none/video/mpeg-4/animation), key frames, compressor quality, etc)...The only thing I wasn't sure about was the data rate (i.e. automatic or restrict to?....and if I use the 'restrict to' what's a good amount?).......i
I have played around w/ these settings and still get jerky motion when played on a data dvd...the only ones that played correctly were the ones created thru the mpeg-2 format setting but these were .m2v files and are separated from the audio .aiff files...(the person getting the file needs the format in .mov format)...
My purpose for these particular exports are to create relatively small but good quality quicktime files that someone else can take and post on the web
I would also like to know what settings I should use if I wanted to 'backup' files for archival purposes in case I needed to go back and use the footage for editing purposes (in this case, file size the normal 720x480).
I'm using quicktime player 7.04 basic (not pro)
I'm using Toast 7 to burn the files. Just been dragging the files onto the Data Tab - Mac & PC format.
Thanks in advance!
powerbook g4

Just use the movie project file in Toast, it is DV and Toast will transcode it to MPEG-2 when authoring the DVD. DOn't encode to a lossy format before Toast as Toast makes MPEG-2 which is lossy enough already without two compression cycles.
You also don't use Toast to just burn a data disc as playback of a very high bitrate QT file might be more than the DVD can deliver.
Use the Toast video tab, DVD video button and add the movie project to the drop area or select from the media browser. Read the Toast manual as well.
For backup - export the project to a fresh DV tape or store the raw DV files on a external hard disk - do not compress it to some QT format and expect it to be "archival" footage to re-edit later - it will look terrible ( and while some people think encoding it to H264 is a way around this - it isn't and takes a ton of time to encode to H264 anyway).
$5 DV tapes are the best backup in addition to a 2nd hard disk.

I feel I must move beyond iMovie, what program should I use ?

I have been happily using iMovie and iDVD from versions 1 through 6. iMovie 08 was so bad that Apple made iMovie 06 available as a free download for buyers of iMovie 08. The newer iMovies were better, but they seemed “dumbed down” (even for me). Now, I am shocked and horrified to learn that the latest iMovie does not even set chapter markers!
So, I have continued to use iMovie 06 and iDVD 08 (they seem to work fine under OS 10.9.4).   iMovie 06 is now 8 years old! I feel compelled to move forward. A lot of my work is DV.    In the past, most of my source material came out of S-Video.   I used a Canopus ADVC300 analog-to-digital converter that gave good results.   Going forward, I will have more video utilizing Component Video, or HDMI.
I am looking into 2 possibilities, Adobe Premiere elements 12, or.........Final Cut Pro X.
The final result of my work is almost always a DVD.   It is hard for me to move from iMovie and iDVD. I never read the manuals for either program, yet, I was able to produce DVDs with nice menus and overall quality close to Hollywood.
It looks like Final Cut Pro X 'can' make a DVD directly without other software. However, from what I have seen on YouTube the result is primitive compared to what iDVD was doing 10 years ago.
Adobe Premiere elements 12 can make nice DVDs and Blu-ray's directly. I have no problem with using a separate program to make DVDs but I haven't got a clue how to do that with Final Cut Pro X.   I suppose I can still use iDVD, but now I'm back to using discontinued software.
I do not need any of the high-powered affects capability that Final Cut Pro X possesses. My “movie-making” is mostly confined to simple editing (the old iMovie 06 did all I needed).
Frankly, one motivation for choosing Final Cut Pro X, is the excellent, compassionate and understanding support that the kind people on this very forum provide. So, what program should I use?

Ziatron wrote:
... I am shocked and horrified to learn that the latest iMovie does not even set chapter markers!
.. I am looking into 2 possibilities, Adobe Premiere elements 12, or.........Final Cut Pro X.
The final result of my work is almost always a DVD. ...
... I do not need any of the high-powered affects capability that Final Cut Pro X possesses. My “movie-making” is mostly confined to simple editing (the old iMovie 06 did all I needed).
to turn perspective for a second by 180°:
Why do you want to switch to a new editor anyhow?
• iM-a never did discs - that was iDVDs job = no big change in your workflow
• iDVD is still working, and aside obsolete, complex and $$$$ DVDSP (part of obsolete FC/p) or Encore (part of Adobes CC rent package) your only option left to create disks on MacOS is indeed iDVD (...ok, there's Toast and Burn and some weird 'shareware'-stuff...)..
• iMovie-b supports the new HDef formats (AVCHD) - you mentioned converters and DVDs = no HDef in use, in your habitat, correct?
• if you don't need FCPX' bling-bling (I can't imagine that ) - why not using FCPX-lite = iMovie? 15$ ...
• chapters could be done in iDVD - just to mention that ............
• AP and FCPX are following very different concepts in usage - my personal preference is 200% on FCPX, … I was one of the loudest nay-sayers, when iM08 araised, meanwhile, FCPX is my dream!! AP (tested it) is way too complex, crowded, 'optionalized' and did I mention 'complex' for me. A bit like Windows vs. MacOS: 'everything goes' (incl. getting lost) vs. 'convenience' (incl. restrictions) ... After 2y of practice, I'm editing my weekly hobby-projects with 6-cam-Multicam, incl. tons of custom graphics, slow-mow, effects (soccer games) in less than 2h ... awesome!
summary:
• why switching?
• use iMovie10 + iDVD
• Premiere (or Premiere Elements!) and FCPX are both avail as fee trial ... test it - but you need iDVD anyhow
• 'disks' is a dwindling niché, for years!- consider to switch to 'other' distribution options
... what are 'chapters' anyhow??... (kid din'!)

Trying to download a FIrefox and when I click on run it asks what program I want to use to open with so I cant finish install

I've been using FF for years and lately have been having issues with internet access. Worked through the troubleshooting suggestions and got it working, but last night FF couldn't connect to internet after something updated and my Norton anti virus was gone too and I couldn't fix it. The last resort was to delete my ff and download new, so I did. When I clicked on run I got a pop up asking what program I wanted to open it with and of course nothing worked. By then it was 1:30 am so I quit. Today I'm having the same issue and I'm at the end of my rope trying to figure out what to do. I'm so disgusted and can't stand it.

# Go to the following page and scroll down to the language you're interested in.
#* http://www.mozilla.org/firefox/all/
# Next to that language, right-click the arrow icon for Windows, choose Save Target As and save the file somewhere handy, like the desktop.
# Run the installer you downloaded.

I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive ,what program can I used to transfer one hard-drive to another hard- drive on this mac pc.

I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive
,what program can I used to transfer one hard-drive data to another hard- drive on this mac pc.

The Disk Utility, Carbon Copy Cloner, SuperDuper, or similar software. For best results, place the second drive inside the computer or in a FireWire enclosure and boot the computer from it before removing the internal drive.
(66989)

I want to clean all of the cookies and bugs that are in my computer causing it to be slow. What program should I use that is safe and won't mess up my computer?

I want to clean all of the cookies and bugs that are in my computer causing it to be slow. What program should I use that is safe and won't mess up my computer?

Problem description:
I would like to clean up my computer. Its beginning to run slow and I believe cookies and bugs are apart of the reason.
EtreCheck version: 2.0.6 (91)
Report generated October 26, 2014 at 4:59:31 PM EDT
Hardware Information: ℹ️
MacBook Air (13-inch, Early 2014) (Verified)
MacBook Air - model: MacBookAir6,2
1 1.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 -
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 13 days 2:41:41
Disk Information: ℹ️
APPLE SSD SD0128F disk0 : (121.33 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 120.47 GB (70.38 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. iPhone
General USB Flash Disk 16.13 GB
S.M.A.R.T. Status: Verified
MSD (disk1s1) /Volumes/MSD : 16.13 GB (11.18 GB free)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] foo.tap (1.0) Support
[loaded] foo.tun (1.0) Support
Startup Items: ℹ️
tap: Path: /Library/StartupItems/tap
tun: Path: /Library/StartupItems/tun
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Daemons: ℹ️
[failed] com.apple.wdhelper.plist
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.perion.searchprotectd.plist Support
User Launch Agents: ℹ️
[loaded] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.ltvbit.plist Support
[running] com.genieo.completer.update.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.jdibackup.ZipCloud.autostart.plist Support
[running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
User Internet Plug-ins: ℹ️
TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
Safari Extensions: ℹ️
Trovi Search for Safari (Disabled)
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      53% mds
      9% WindowServer
      3% mds_stores
      3% storeagent
      2% hidd
Top Processes by Memory: ℹ️
920 MB mds
31 MB com.apple.WebKit.WebContent
30 MB Messages
29 MB Safari
21 MB WindowServer
Virtual Memory Information: ℹ️
31 MB Free RAM
713 MB Active RAM
681 MB Inactive RAM
1.09 GB Wired RAM
17.85 GB Page-ins
1.95 GB Page-outs

In email, when I click on a "pdf" file, how do i get it to just open instead of being asked what program I want to use?

When I get a "pdf" in an email and I click on the "pdf" button, I am always asked what program I want to use. How do I get the file to just open automatically?

You can specify in Windows what program to use for a given extension, for instance Adobe Acrobat Reader, for files with PDF extension. How you can connect the program and the extension, is described in this article; [http://windows.microsoft.com/en-US/windows-vista/Change-which-programs-Windows-uses-by-default "Change which programs Windows uses by default"]
In Firefox PDF links get opened automatically with Acrobat reader. When clicking on PDF attachments in Thunderbird, however, you will need to associate the program and the extension as described in the above article.
Hope it helps!

I am confused. Tell me what to do.. I am using Indesign and want to go on using the program as cheap as possible. Which possibilities have I got?

I am confused. Tell me what to do.. I am using Indesign and want to go on using the program as cheap as possible. Which possibilities have I got?

Not enough information to provide an answer... do you have a licensed (old) version, or do you have a Cloud subscription?

Trying to download a trial product but it keeps asking me what program I want to use to download it??

Trying to download a trial product but it keeps asking me what program I want to use to download it??

try a different brower.
if that fails, what link and what product/version for what os?

I can't open the downloaded evaluation copy of Project Professional 2013. Asks me what program I want to use to open the file.

I can't open the downloaded evaluation copy of Project Professional 2013. Asks me what program I want to use to open the file.

I think you have downloaded .img file. If you want to install that program follow the given instruction.
download open source magic disc viewer software.
http://www.magiciso.com/tutorials/miso-magicdisc-overview.htm
After installation, right click on notification icon of magic disc, click Virtual CD/DVD ROM -> No Media -> Mount,
Select disc image file of project professional 2013.img.
Open My Computer -> select mount drive and install that program.

When I want to synch my iphone to my computer shows the following message keeps appearing: This iphone cannot be used because the Apple Mobile Device service is not started. Any ideas what I must do?

Any ideas what I must do when I want to synch my ophone to my computer the following message keeps poopping up: This iphone cannot be used because the Apple Mobile Device service is not started? I am not sure how to proceed. Hepl please....

take a look at this link http://support.apple.com/kb/TS1567

Firefox is asking me what program I want to use to open firefox. It has never done this before.

Several days ago an XP internet Security 2012 invaded my computer. It would not let me do anything except sign up for a $60 program. It did allow me to send a message to its support stall. But of course I could not get to my email to read their answer. Yesterday I went to safe mode Firefox and that allowed me to get to my email. The message from XP internet security apologized and suggested that I set the date on my computer 6 days ahead and that would remove their program. So I did and their program is gone. But now whenever I want to use firefox it asks me what program I want to use, I select Firefox and the site opens. Also I can not change to date back to normal. When I go to the control panel and click on date and time, it says application not found and does the same thing for most everything else in the control panel.

'''''XP internet Security 2012''''' is malware masquerading as anti-malware. You may need to go to an un-infected computer to read the following article, to download the tools needed to remove it (then transport them to your infected system on a CD or DVD; avoid using a pin/jump/thumb/USB drive to transport the files as it can become infected).
*http://www.bleepingcomputer.com/virus-removal/remove-xp-internet-security-2012
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins <u>after you get the infection cleared</u>. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''Next Generation Java Plug-in for Mozilla browsers''': [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

When i open firefox, i get asked what program i want to use to open this file.

when i open firefox, i get asked what program i want to use to open this file. i select firefox to open firefox, and it opens to - Index of file:///C:/Documents and Settings/HP_Administrator/- instead of my home page. this has been going on for months. today i updated my kaspersky intrnet security 2011 and since then fire fox will only open in firefox safe, even if i shut down kaspersky. IE opens with no problems.
thanks
jeff

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

What program must I use, if I want to program C

Similar Messages

Maybe you are looking for