What's causing email transfer disruption network error?

I would appreciate help in troubleshooting and solving my problem of which the email transfer disruption network error is only one of the problems.
I'm using Mozilla Firefox rather than Microsoft Explorer with Ixquick as my default Internet search engine. I have Juno as my email provider. I have the same features on a laptop via WiFi and my workstation.
We have a new modem, and have had problems since the installation of the new modem.
With each attempt to transfer my email, there is the following Mail Transfer Error message: "There were errors encountered during mail transmission. Mail transfer was disrupted by a network error."
In searching the Internet using Ixquick, I encounter the following message(s):
"Unable to connect"
"Firefox can't establish a connection to the server at support.moxilla.org."
"The site could not be temporarily unavailable or too busy. Try again in a few moments."
"If you are unable to load any pages, check your computer's network connection."
"If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web."
"Try Again"
Thank you for your time and efforts with this matter.
Take care,
Margo

When you look at the address in the address bar, does it seem to match up with the email?
Sounds like Firefox sent the server something it wasn't expecting. Sometimes this can be caused by obsolete or corrupted cookies -- assuming you have visited the site before. It also might be caused by modifications to standard information sent to servers such as the "user agent" string that specifies your browser version and OS.
To clear a site's cookies, while viewing a page on the site, either:
right-click and choose View Page Info > Security > "View Cookies"
(menu bar) Tools > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

Similar Messages

What is causing ASA 5520 v8.4 error 305006 for DNS traffic?

I implemented transparent mode NAT in single context mode on an ASA 5520 v8.4. Some connections are working well, but I am seeing others unable to resolve DNS. I am seeing lot of the following error messages:
Syslog ID 305006 regular translation creation failed for udp src inside: 10.x.x.x/x des outside:192.168.1.3/53
Any ideas on what I might look for as possible errors in my configuration?

I implemented transparent mode NAT in single context mode on an ASA 5520 v8.4. Some connections are working well, but I am seeing others unable to resolve DNS. I am seeing lot of the following error messages:
Syslog ID 305006 regular translation creation failed for udp src inside: 10.x.x.x/x des outside:192.168.1.3/53
Any ideas on what I might look for as possible errors in my configuration?

What's causing email spoofing FROM my Outlook account

I detected email spoofing of my company email address through a notification that a message was undeliverable. My sys admin said to install antispam software on my Mac, but is that the problem? Does that protect against sending spam too? Is a virus on my machine a possibility? Or is it more likely on the server?
I'm not highly technical on system issues so I'm not sure what information is useful in detecting the source of the spoofing. Obviously it's important that my business email isn't spamming or infecting clients' machines, who are mostly PC, by the way. I use Outlook 2011 and also have an IMAP account on Apple Mail for the same company email. My Outlook account syncs to MS Sharepoint online.
I have no antivirus software installed. I use Flash and Java for work. I'm running Mavericks 10.9.4 and installed the update July 12, 2014. My system is running very slowly now, but that could be an unrelated issue with this 2008 model laptop.
Any thoughts or similar experiences would be much appreciated.

Thanks for the followup, Camelot. All I have to work with are the headers included in the delivery failure notification. None of those IP addresses match my machine, so that's good. But they all match our company server at outlook.com. I'll verify that with the sys admin tomorrow.
It looks like my email address was spoofed in forwarding some spam about 6 hours after it was received. The initial spam message was sent to a group info@ address at my company from a domain in Asia and the content was in an Asian language script. That was then somehow forwarded from 'me' to a Mexican domain and rejected. [email protected] That address isn't in any contacts list on my machine and I've never seen it before.
It seems like a nasty little virus, but being a Mac user, I'm not at all experienced in those !
I also appreciate your comments on the SMTP protocol. It's really a shame it's so easy to do. I'm aware that there's a code you can set on your account that will verify an email came from you. My mail host added it to my personal account.
Again, thank you for the thoughtful and detailed reply. Very helpful.

FRM-9999 Network Error

Does anyone know what would cause the FRM-9999 network error message? I don't think it's the network. Rather, I think there's a disconnect between the forms or app server to the database that's creating the error.
Thanks!!

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Mustafa Lakdawala ([email protected]):
<HR></BLOCKQUOTE>
Sorry about the previous blank mail. It was an accidental click. Any way here are the details of the FRM-99999 error I get.
FRM-99999. A network error occured, the client will not be able to continue.
Details...
Java Exception
java.io.Exception (As Jason correctly pointed out)
at java.lang.Throwable <init>(Compiled Code)
at java.lang.Exception <init>(Compiled Code)
at java.io.Exception <init>(IOException java:34)
at java.io.EOFException <init>(EOFException.java40)
at java.io.DataInputStream.readUnsignedByte(Compiled Code)
One more thing these FRM-99999 errors do not come up each time I restart the web and forms server and start coming up again if the browser is left inactive for some time.
Can anyone tell me a work around.
Thanks!!!
Can
null

Whats the cause of this problem

Hi everyone!
Whats the cause of this sort of errors/warnings in alert log.
kcrrsarc: (WARN) Failed to find ARCH for message (message:0x1)
tkcrrpa: (WARN) Failed initial attempt to send ARCH message (message:0x1)
Maximum redo generation record size = 80896 bytes
Maximum redo generation change vector size = 77472 bytes
tkcrrsarc: (WARN) Failed to find ARCH for message (message:0x10)
tkcrrpa: (WARN) Failed initial attempt to send ARCH message (message:0x10)
*** 2011-04-16 01:24:12.184
Warning: log write time 990ms, size 3KBThanks.

The value was 10 and I just increased it to 12That seems to be an extremely high value. I would guess that your I/O system f or the redo log and archivelogs cannot keep up with the rate of redo generation.
You may have addressed a symptom, not a cause.
Is the cause :
a. Very (unnecessarily) high redo rates ?
b. Slow I/O (with a warning about log write time being logged) ?
Hemant K Chitale

I get a network error that pops up that says model_ERROR_BIND and tells me to check the network settings. But all is working fine. Any ideas what to do to fix this error.

I get a pop message that says there is a network error. The message is MODEL_ERROR_BIND. Please help. The network seems to be working fine.

You have some other problem with your boot drive that has corrupted data backed up to the TimeMacine drive.
My advice is to boot into each operating system and manually backup just your Users files each to separate regular external drives (no Timemachine or backup software) and disconnect.
Make a note of any serial numbers, emails, address book contacts, export bookmarks etc. that isn't typically in your users folders data.
You might be able to Winclone 3 the Windows as a whole thing as it's appearing not to have issues but it's your MacintoshHD partition that is so that will have to be rebuilt from scratch.
Most commonly used backup methods
If your OS X parititon doesn't boot, you can use this to recover files.
Create a data recovery/undelete external boot drive
Without any further detail about your machine I can't advise specifically what to do, but it involves using Disk Utility to Zero Erase (move slider one spot to the right or in 10.6 using Security Option) the ENTIRE boot drive and reformatting, then installing OSX fresh and then setting up BootCamp again.
If you wish to switch your boot drive for something better, this is a good time to do this.
Install/upgrade RAM or storage drive in Mac's
If your machine is capable of Internet Recovery, then use that, then upgrade.
If your machine came with 10.6 or earlier, then use the 10.6 install disks and work up from there.
Erase, formatting, OS X installs on Mac's

I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. Any ideas what is causing this?

I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. I have been to the local Genius bar and through trial and error we have determined that Mail is working ok but somehow the account is causing the problem. I have used this account for years. Any ideas what is causing this?

No idea why, but one thing you may try if you have the time, is create a new user, and set up the problem mail account in the new user space. See if it causes your MBP to hang as well. That will tell you if it is something wrong with your main User, or something wrong with MBP.
Assuming this works, I'd nuke the problem account in your main user space, re-start, and reinititate the account and see if that helps.
Depening on how many email accounts you have setup, it may be necessary to nuke the whole Mail folder in your User/Library.... Hard way to get it to work, but just my idea.

What is causing a disk error when saving psd files or writing to cache?

The problem only happens when running Photoshop CC (2104) and Bridge (actually these are the only two programs I really use my external drive for) during a save or write operation to an external hard drive. I can work for hours, with multiple files open, saving, creating, etc. without a problem and then suddenly I'll get a message from Photoshop saying, "Could not save .... because of a disk error." or from Bridge saying, ".. unable to write to cache..".
When I quit and try to troubleshoot the problem, I find that, for some reason, Mavericks has put system files on my external (non boot) drive or, for whatever reason, thinks there is a system file on it. Consequently, the drive cannot be ejected (Error message: "... one or more programs may be using it...") and I cannot repair it using Disk Utility (Error message: " ... live file system repair is not supported"). I also cannot write to it (Error message: "... unexpected disk error has occurred (error code: -50)"). The problem persists even after quitting all other programs, which wouldn't surprise me if Mavericks thinks there is a system file on it.
I have force ejected the drive a couple of times but became concerned that I might be compounding the problem. Now I just restart my computer and run Disk Utility Repair Disk. (Don't know which is worse.) Disk Utility either doesn't find a problem or, if it finds one, it repairs it. After that, Photoshop and Bridge work fine for a while.
System information:
MacBook Pro 13" 2.4GHz with 16GB RAM, 500 GB HD (recently upgraded)
Apple Cinema Display
Mavericks (up to date)
G-Technology G-Drive (Gen 5) 2TB HD connected via Firewire 800 (latest firmware)
Unconfirmed observation: I believe the first few times this problem occurred, Firefox was up an running. I made a point of quitting all programs except System Monitor when running Photoshop and Bridge and I can't remember having the problem again. The the last time the issue occurred, today, however, Safari was up and running.
Is this an OS problem, a hardware (disk drive, cable, etc.) problem, a software problem (PS, Bridge) or some combination? I have put this much detail in the post hoping someone can share some insight into the cause. I will be sending this report to Apple and G-Technology and I will report any resolution, if and, hopefully when, I find one.

The only thing that will cause a disk error is an actual error from the disk.
Photoshop is just telling you what that OS told it about the error.
It sounds like you need to boot off another disk and try to repair your disk.
Also, make sure you have a backup. And check the SMART status to see if it is failing and needs to be replaced.

Photoshop CS4 for Mac What can cause the error: Plug-in failed to load - NO VERSION

With Photoshop CS4 for Mac I install the Kodak Plug-in DIGITAL GEM Airbrush Professional v2.1.0. When Photoshop starts I get an error:
Plug-ins that failed to load:
   DIGITAL GEM Airbrush Professional v2.1.0 NO VERSION - - from the file “DigitalAIRProv2.plugin”Flash:
   Connections
   Kuler
This plug-in works fine on my Mac Pro with Photoshop CS4 and OS 10.6 but fails on a new Macbook Air.
Reinstalling the plug-in did not make any difference. What can cause this error?

Thanks Chris, That was my first thought too but this same plug-in works on another installation of CS4. This is a Mac installation and the plug-in is Universal so it should work. Is there any other possible cause for this error? Would Photoshop refuse to load a plug-in in a low memory situation?
Also, The Flash extensions:Connections and Kuler are working OK, I just copied a little more out of the System Info report than I needed to.

"A network error ocurred while attempting to sign in" on the reader page--What gives?

While attempting to sign in to the reader page, I get the following error message:
A network error occurred while attempting to sign in. I am a stand alone, not on
a network. What gives???

Mr. B Alheit, good day to you sir and thanks for the information/update. I have a single stand-alone
computer which has never been on a network. This used to not be a problem, but I will make a bold
attempt to restore network status by way of the control panel. Thanks again, and wish me luck.
Best--Gregory

When trying to send a photo via email, I am prompted to setup an email account even though email is already setup. What would cause this?

when trying to send a photo via email, I am prompted to setup an email account even though email is already setup. What would cause this? Better yet, how do I fix it?

I have checked this on my device. I see a Default account under Messages created outside of Mail will be sent from the default account. There is an account selected, though it does not show my exchnage account. If it is only an exchange accout, can that not be used for this?

In my preferences on my mac mini when i click it, i find the lock the open even after changing the password what would cause this?I use my home wifi network and have never given the password out,as I asked what could cause this?

What could cause the lock in my preferences to seemingly to click open on there own,I use my home wifi network which is private and have never given out that password either for my network or preferences password.....help,Thank you

You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

TS3274 When sending a photo by email, the receiver gets the photo upside down. Why is this and what can I do to correct the error please?

When sending a photo from my iPad with an email, the receiver gets the photo upside down. Why is this and what can I do to correct the error please?

I venture to say the recipient is a Windoze user and if so, state of the art Windoze ignores or doesn't recognize photo orientation data that is included with a photo's EXIF data.
There are 3rd party photo viewing apps that provide for this but not incorporated with Microsoft software.

What has caused "data error count" under execution detail on Audit browser

Hi,
I have a simple mapping that load data from external table to target fact table. From OWB Runtime Audit browser, the Execution Details page show the status= Complete + <Red error sign>. And the value under Data error count is 2563. Where can I look for information about what has caused this errors or what the data error are? The SQL*Loader log file looks OK and no bad file generated. And I don't see suspecious under WB_RT_AUDIT*, WB_RT_ERROR tables It's owb9ir2 on 9iDB Thanks.

Solved. I set the audit level to the highest and re-executed and can see the error msg now. It would be nice if audit broser can show the report for all the rejected rows.

When I send emails with photos from iPhoto recipients often tell me images are upside down. What would cause that?

When I send emails with photos from iPhoto recipients often tell me images are upside down. What would cause that?

Found this :
https://discussions.apple.com/thread/3431867?start=0&tstart=0
by doing this :
http://www.google.com/search?q=images+are+upside+down+ios

What's causing email transfer disruption network error?

Similar Messages

Maybe you are looking for