In my preferences on my mac mini when i click it, i find the lock the open even after changing the password what would cause this?I use my home wifi network and have never given the password out,as I asked what could cause this?
What could cause the lock in my preferences to seemingly to click open on there own,I use my home wifi network which is private and have never given out that password either for my network or preferences password.....help,Thank you
You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.
Similar Messages
-
I entered the incorrect password for my home wifi network, and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?
Settings > wi-fi then tap on the little blue arrow next to the network you want to change. You have to tap on the blue arrow and not on the name.
Now at the top tap on "forget this network".
After that, the iPhone will think your home network is a new network and will ask you for the password to connect. -
I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?
you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.
-
I am trying to set up home sharing between my iphone 4s and mac which is running itunes 11. Both are connected to my home wifi network and using the same apple id but on the iphone app it says 'Turn on Home sharing in iTunes on your computer or apple tv using account ***
Does anybody have suggestions as to why this is the case?Understanding Home Sharing - Support - Apple
Hope this helps. -
I just purchase this card two hours ago on my visa debit card and I am receiving a invalid nonactivate message. What do I do. I always purchase iTunes cards and have never experience this before.
Are you able to go back to where you bought it from and see if they can activate it properly ? If not then you can try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and probably of the receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
My iphone 5 does not appear to be remembering my home wifi network and connect to it automatically. I have to reconnect manually each time. My other iphone (4s w/iOS6) has no such problems. Any suggestions?
It's not a bug in iOS 6, and it won't be fixed. It's usually caused by your phone having been paired to 2 different networks with the same SSID. So it needs to ask which one you meant. Occasionally be corrupt data in the network settings, which is why Allan suggested Forget This Network.
-
Just bought a new IMAC. Cant get the iPhoto to open even after apparently loading the library upgraded. Ideas?
Did you install and RUN the iPhoto Library Upgrader on your library?
OT -
How can I access my iTunes music library using my iPad air, both in my home wifi environment and away from home? Music loaded onto iTunes on my home windows PC. Thanks
Start iTunes on the computer and connect your iPad to your computer. Select your iPad in iTunes on your computer then select the Music tab in the main window. You can choose to sync all music to your iPad or select only those playlists you want on the iPad. When you click on .sync or Apply the selected music will be copied to your iPad.
You can sun photos this way also. -
I have the premier elements 3.0 version. I have been using it successfully for years and have never
I have been using it for years with success. Recently I had a proplem with opening the program. I brought it to Best Buy. They fixed it and I can make the movies but I can not burn a DVD. I get a message, " cannot initialize the DVD burner engine". Can you help me.
>cannot initialize the DVD burner engine
That MAY be related to the information in the links below
These notes are (mostly) for Encore, but since the disc burning module inside Premiere Elements is also licensed from Roxio, the steps and ideas are the same for PE
As well as the below, right click the program icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems... To create a two layer DVD (or a BluRay?), you MUST have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/969395
-and Vista http://forums.adobe.com/thread/1021721
Odd Errors http://forums.adobe.com/thread/670174
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558
And This Message Thread http://forums.adobe.com/thread/665641
Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
Create a DVD output ISO file (Encore) or set your DVD output to a folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program) -
Connecting two routers to create a home network and have access to the net "wired"
How do i set up a network between two linksys routers that can access the internet and computers set up on both routers. I noticed I cannot browse our home network computers that are behind the other router. currently i have a net connection going to router 1 and a cable from that router going to the wan port on router two. I cannont access router 1 computers from router 2. thank you for your help!
See here.
-
I am stuck on the log in page even after changing my password
I think it was when I upgraded to version 5. Went to login page and entered password. Changed password, still nothing, stays on login page
Try to clear the cookies from that website.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies" -
Hi,
i am currently using 10.6.8 snow leopard
i usually access internet through my broadband modem and wifi at home.
i've been using our home wifi network for almost 1 week now (since it's new) and almost everyone at home use it as well.
and im using my broadband everytime i go out.
this last week, i went to a vacation and i use the wifi connection of the hotel where i stay in.
my connection works fine and so i don't use my broadband anymore.
then i got home..
when i got home.. i tried to connect to our home wifi network again .
like what im doing before, im clicking the airport icon on the top of my desktop,
and since my airport is always on, the next step that im doing is to click the preferred network that i want to join and put the password on it.
this is perfectly working in my macbook before i left.
but now , it's not working to my laptop anymore! i can't connect to it!
after putting the password and hitting the enter, the airport icon at the top will run, however after seconds it showing gray color with exclamation point on it!
the alert is showing : No internet connection
but the network i joined is still checked and showing full signal !
i tried checking my Network under system preferrence and the airport tab in the left corner is showing me a message that
my airport has the self-assigned IP address 169.***.****.** and will not be able to connect to internet!
i don't know what happen and i dont understand why is this happening since everyone at home can still use and access our home wifi !!
it's the same network that i'm trying to connect to anyway!
i tried using my broadband instead to connect online and it works fine!
but everytime i try to connect using wifi at home , again i cant connect!
anyone can tell me what's going on?
i haven't try joining other network anyway! but i'm planning to do so..
can some one help me please??
showing me a message that
my airport has the self-assigned IP address 169.***.****.** and will not be able to connect to internet!and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!! -
I have installed adobe reader onto my Mac but when I open up an adobe pdf it tells me that i need to accept the end user license agreement, quite, and then open up a new browser but i have never seen the end user license agreement. What should I do in order to accept the end user license agreement even though it never pops up when i install adobe reader?
Make sure Readr is closed. Go to the Applications form, look for the Adobe Reader icon, double click on it, and follow the lead. Restart Reader when finished.
-
I have the Numbers-applications on both Mac mini and Macbook Air. My problem is that they don't sync so when I create a Numbers-file on the MacBook while travelling, it will not be on my Mac mini when I get home :(((
Hey iWeb plubishing problems,
I would first check to make sure that you meet the system requirements for OS X to support Documents in the Cloud. For that your Mac’s needs to be running at least OS X Lion 10.7.5 or later to make sure that everything syncs. Take a look at the article below for more information.
iCloud: Troubleshooting Documents in the Cloud
http://support.apple.com/en-us/HT203517
Take care,
-Norm G. -
When I open I photo, I just get a spining white wheel. Mac is 2 months old and have never used iphoto. what is wrong ? I've reinstalled from the disk. I've tried the Option command idea..nothing seems to work ?
Post in the iPhoto forum.
Maybe you are looking for
-
Converting a pdf document with devnagari font
Is it possible to convert a devnagari pdf to devnagari word in krutidev010 font?
-
Closed captioning not appearing in video files
I've been working on producing a number of videos intended to be used as content in an iPad app for a Self-Guided Museum Tour which is under development by a non-profit Museum I work for. Many of the videos are intended to have closed captions for th
-
Looking for sound designer for a survival horror game
Hi all, We are looking for a talented sound designer to help make atmospheric ambient soundtracks and sound effects. Our current project, Nightfall, is an atmospheric horror oriented game that is focused on provoking many different emotions from our
-
VS 2010 and sql server support
Hi, I'm currently using VS 2010 10.0.40219.1,Framework 4.5.50938 SP1 Is the above is supported with sql servers versions of 2012, 2014. What if i switch to VS2012, will it support sql server 2008, 2008 R2. Pleas share your inputs Thanks
-
Cannot find "JPD Document Upgrader options"
When I upgraded application from weblogic8.1 to weblogic10.2,the application exist jpd ,dft and xq files. I want to upgrade them with tools, but I cannot find the "JPD Document Upgrader options" item. Does any one know why "JPD Document Upgrader opti