What's causing VDP to fail installation? VDP: Configuring Install Storage vSphere Data Protection 5.5 An error  occurred  while  performing  this task.

I have been pulling my hair to figure out what's going on here. I can deploy the VDP ovf appliance fine, it's allowing setup to finish so I can start using it. It fails at the final stretch, during the Storage Configuration. Here's the errors event log:
XXX
com.vmware.vdp2.config.failed.config.os.data.di-
sk.formatOnVm not found XXX
XXX com.vmware.vdp2.config.failed.config.os.data.disk.category not found XXX
4/9/2014 12:05:05 PM
VDP: Configuring Install Storage
vSphere Data Protection 5.5
VDP: Finalizing storage configuration.
error
4/9/2014 12:05:06 PM
VDP: Configuring Install Storage
vSphere Data Protection 5.5
VDP: Completed finalizing storage configuration.
error
4/9/2014 12:05:07 PM
VDP: Configuring Install Storage
vSphere Data Protection 5.5
This is all I get, and I have to start all over again only to run into the same error. I have a NFS share mounted to the HOST to store the VDP hard drive images. Help, please! ~_~
Regards,
Mark A.

Just found this from a Google search.  I'm about to try it!
Deployment of a VMware VDP appliance fails on NFS shares on a Windows Storage Server 2008 R2 or Windows Storage Server 2…

Similar Messages

  • Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)

    Hi there
    Patch Tuesday yesterday (10th June2014). As always we deploy new patches first to a test collection where Windows 7 updates automatically apply.
    Upon trying to rebuild any of the machines in this test collection, we were presented with the following error message:
    Failed to run task sequence.  Error occurred while starting the task sequence (0x8007000E)
    After searching about this, I found this page from Niall Brady, which explained the problem:
    http://www.niallbrady.com/2013/05/17/after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log/
    So I removed some of the machines from the test Windows update collection, and as per the advice in the above link, the error was gone and those machines could be built successfully.
    So the problem is there were too many many policies downloaded (apps, packages and most of all updates) for the task sequence ram to store, hence the error.
    Now...
    ...I have a question.
    The next logical step to my mind is to patch our OS image with all missing patches, so these do not have to be downloaded at build time. Niall mentions this as one of the resolutions to this issue.
    However there seems to be some confusion over whether this would actually make a difference.
    I read through this link:
    http://social.technet.microsoft.com/Forums/en-US/7e597b44-2586-4063-b6d0-cec48a7c11c7/sccm-2012-task-sequence-failure-0x8007000e?forum=configmanagerosd
    There's seems to be no consensus on this.
    Is SCCM 2012 clever enough to - when the task sequence is first started - to download ONLY the updates (policies) it detects as NOT present in the OS image...
    or
    Will it simply try to download policies for ALL items deployed to it, whether the updates are present in the OS image or not?
    I will be disappointed if SCCM 2012 SP1 CU2 isn't clever enough to only download policies at build time for the apps, packages and updates it detects as needed.
    I'd be grateful for some clarity on this.
    Regards,
    John, Glasgow.

    Hi Jason
    Thank you for replying, I appreciate it.
    1) We currently have 15 or 16 software update groups for Office updates, dating back a month or two. The latest software update group contains all the patches in the previous software update groups plus the patches released on 10th June. Do you recommend
    deleting all but the latest software update group?
    2) I'm almost reluctant to ask this, but based on what you have advised, is it the case that when the task sequence executes, it will download policies for each update in each software update group regardless of whether it has already downloaded a policy
    for an update in a previous software update group? So in effect it's downloading policies (for updates) it has already downloaded?
    3) I'm not clear on why there would be no policy for an image; in Niall Brady's informative page on the 8007000E error, he writes the following:
    "The reason it has run of space could be due to four possibilites: too many applications, too many Windows updates, too many Task Sequence steps, too many referenced packages'.
    Can you shed some light on why there isn't a policy for an image?
    Thanks again for replying,
    John.

  • IOS 5 seems to work, but when I connect the ipad to my macbook, i get the message that itunes was interrupted when restoring. I try to restore again and I get the message "An error occurred while restoring this iPad (-50)." What should I do?

    iOS 5 seems to work on my ipad, but apparently something went wrong when restoring. I lost music and movies, and when I connect the ipad to my macbook, I get the message that itunes was interrupted when restoring. I try to restore again and I get the message "An error occurred while restoring this iPad (-50)." What happened and what should I do?

    I have had the same issue since day 1 of the ios5 installation.  I always hit "Cancel" and then the iPad eventually shows up again in iTunes.  Then a few hours later, I get the same message again.  Annoying, but I've not found a way around it.

  • OSD - Failed to run Task Sequence. An error occurred while starting the task sequence (0x8007000E).

    Failed to run Task Sequence.
    An error occurred while starting the task sequence (0x8007000E)."
    While OSD, picks up task sequence but fails in resolving task sequence dependencies. SMSPXE identifies device is not in database (unknown).
    SMSTS.log shows
    ThreadToResolveAndExecuteTaskSequence failed. Code(0x8007000E)" in SMSTS.LOG, have seen other articles suggesting failure due to lack of storage (RAM) but this task sequence has worked in past.
    By the way, if I create a stand alone media, we are able to image the workstation. What has changed in the task sequence such that the workstation is unable to download policies due to lack of storage (RAM) on workstation. Workstation has 2 GB of RAM.

    I have found a work around for the issue, even though the computer is unknown, there were software updates targeted to the ALL SYSTEMS collection which applies to All Unknown Computers and therefore to x64 Unknown Computer and x86 Unknown Computer.
    We had a SCEP ADR applying definition updates to All Systems, we applied the ADR to a different collection, removed all the SCEP updates to All Systems and successfully re-imaged the workstation. Following article was of great help in identifying the problem
    after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log
    Thanks Gerry for your assistance.

  • SharePoint List Error :[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)

    When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table
    in the list I created returns this  error.
    I can connect fine with InfoPath
    [DataSource.Error] SharePoint:   Request failed: The remote server returned an error: (500) Internal Server   Error. (An error occurred while processing this request.)
    thank you for your help
    Andrew
     

    Hi Andrew. In order for us diagnose this issue, you'll need to capture some network traces using a tool such as Fiddler and share them by sending a Frown.
    To capture a trace using Fiddler, start Fiddler, enable the Tools > Fiddler Options > HTTPS > Decrypt HTTPS traffic option, start the capture, reproduce your issue, then stop and save the capture. You can find more information here.
    Once you've done that, please send a Frown through the Power Query ribbon and attach the traces.
    Thanks,
    Ehren

  • I have a problem when ı want to update and restore my ipad for ios5 : an error occurred while restoring this ipad (-10), what can i do??

    i have a problem when ı want to update and restore my ipad for ios5 : an error occurred while restoring this ipad (-10), what can i do??

    Error -1 is not mentioned in this article about error messages during a restore process: http://support.apple.com/kb/TS3694
    This one comes close:
    The device could not be restored. An internal error occurred, or Error 3200: This indicates a network-connectivity or traffic issue. If you see this error, wait an hour or more and try again.
    You may also check your security software settings, to make sure that iTunes can contact Apple servers during this process: iTunes for Windows: Troubleshooting security software issues

  • I get the message "an error occurred while processing this directive" but no hint of what the error

    I am trying to download Photoshop for the first time. I get the message "an error occurred while processing this directive" but no hint of what the error is or what I should do about it.

    Graham which version of Photoshop are you referencing?  Also which operating system are you using?  Finally can you please post a screen shot of your error message?

  • When i try to load the itunes introduction i only get: an error occured while processing this directive. What can i do!?

    Hey there,
    When i try to load the itunes introduction i only get: an error occured while processing this directive. What can i do!?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • What does this mean: error occurred while restoring this iphone (-35)?

    What does it mean when you are attempting to restore a phone and you get this message: error occurred while restoring this iphone (-35)

    http://support.apple.com/kb/TS3694#error35

  • What does it mean when I get this message: "an error occurred while processing this directive"

    www.sprint.com main page loads with this error message all over the page. If I click on business at top of site and then back to personal all loads correctly. What do I have to do to have it load the first time?

    It sounds like an error on the server: Firefox may be sending something unexpected, inconsistent, or incomplete that is causing the failure. But since they give so little information, that's just a guess.
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    "3-bar" menu button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * (menu bar) Tools > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?

  • I have just updated my iphone4 to iOS 5 and unable to restore my back up. The error message that appeared was "an error occurred while restoring this iPhone (-50). Can anyone tell me what the problem is?

    . Can anyone tell me what the problem is?

    I have had the same issue since day 1 of the ios5 installation.  I always hit "Cancel" and then the iPad eventually shows up again in iTunes.  Then a few hours later, I get the same message again.  Annoying, but I've not found a way around it.

  • Why can't I send emails from my Macbook Pro. A window pops up saying this: Sending the message content to the server failed.  The server response was: An error occurred while sending this message using the SMTP server "(null)"

    This is starting to REALLY frustrate me! I used to be able to send emails with attachments perfectly fine with my email, and now all of a sudden it won't work. I work from home, and 8/10 my emails need to have images in them. SOMEONE PLEASE HELP ME!

    Contact your internet service provider. They can run some tests to verify the cause of the problem. This sounds very much like an ISP issue.

  • Anyone know what this error means/how to fix it?:  An error occurred while restoring this iPhone (-50).

    My sister-in-law wanted the new Operating System for the IPhone 4, and i plugged her phone into MY macbook in order to do this.   Before I updated the operating system, I synced her phone (at least I thought) to my computer.   It went through the whole process, transferred her purchases and everything.   But once I updated the operating system, it gave me the error message "An error occurred while restoring this iPhone (-50)." right at the end.   Then her photos, videos, and contacts were all gone.   Could these possibly still be on my computer somehow and I just can't see them?  I don't want her to lose all of her stuff.   Thanks.

    Normally you would be able to do a Restore from Backup in iTunes, but since no backups are saved in YOUR iTunes, you're out of luck.

  • SharePoint Foundation 2010, hotfix install fail "An error occurred while running detection"

    Hi all,
    I am having a lot of trouble installing hotfix 2849990 on my server. After running it shows the error "An error occurred while running detection". I tried another hotfix as well but got the same result. I read on the web to do a "repair"
    but I cannot seem to access that. I attempting to run the install to get there, I click "Install SharePoint Foundation" a new window begins and I can see a new window open that reads "Please wait while setup prepares the necessarily files"
    Very shortly after this opens, it then closes and nothing else happens. 
    Anybody have any suggestions?
    Thanks!

    Thanks for the quick reply. Here is the Folder I am looking in:
    "C:\Users\[My User]\AppData\Local\Temp\2" Let me know if this is incorrect.
    Here is some of my opatchinstall log:
    OPatchInstall: Logging all properties
    OPatchInstall: Property 'PACKAGE.KBARTICLE' value '2880975'
    OPatchInstall: Property 'PACKAGE.MIN.MSI.VER' value '3.1.0.0'
    OPatchInstall: Property 'PACKAGE.NAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
    OPatchInstall: Property 'PACKAGE.PATH.TEMP' value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp'
    OPatchInstall: Property 'PACKAGE.PLATFORM' value '64-Bit Edition'
    OPatchInstall: Property 'PACKAGE.PRODUCTNAME' value 'Microsoft SharePoint Foundation 2010'
    OPatchInstall: Property 'PACKAGE.PROMPT.ALREADYINSTALLED' value 'The update is already installed on this system.'
    OPatchInstall: Property 'PACKAGE.PROMPT.CONFIG.AFTERUPDATE' value 'You must install the same SharePoint 2010 Products and patches on every server in your server farm. If you have multiple servers in your farm, please immediately install the same patches on all the other farm servers once this installation has completed.'
    OPatchInstall: Property 'PACKAGE.PROMPT.DETECTIONERROR' value 'An error occurred while running detection.'
    OPatchInstall: Property 'PACKAGE.PROMPT.DETFAILED' value 'The detection failed, this can be due to a corrupted installation database.'
    OPatchInstall: Property 'PACKAGE.PROMPT.ERROR.WITHKB' value 'The installation of this package failed. Please see for more information.'
    OPatchInstall: Property 'PACKAGE.PROMPT.EULA' value 'You must accept the Microsoft Software License Terms in order to continue the installation.'
    OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFAILURE' value 'The extraction of files from this package failed.'
    OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFOLDER' value 'Select a folder to store the extracted files'
    OPatchInstall: Property 'PACKAGE.PROMPT.INITIAL' value 'Do you wish to proceed with the installation?'
    OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLCANCELED' value 'The installation of this package was canceled.'
    OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLFAILURE' value 'The installation of this package failed.'
    OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLSUCCESS' value 'The installation is complete.'
    OPatchInstall: Property 'PACKAGE.PROMPT.NOPRODUCTSPRESENT' value 'There are no products affected by this package installed on this system.'
    OPatchInstall: Property 'PACKAGE.PROMPT.NOTADMINUSER' value 'You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation.'
    OPatchInstall: Property 'PACKAGE.PROMPT.NOTMINMSIVERSION' value 'This program requires Windows Installer 3.1.0.0 (or greater).'
    OPatchInstall: Property 'PACKAGE.PROMPT.NOTNEEDED' value 'This package is not needed for the current release of the installed product.'
    OPatchInstall: Property 'PACKAGE.PROMPT.PATCHEDBYADMIN' value 'The update cannot be installed due to a previous update was installed through a modified installation source.'
    OPatchInstall: Property 'PACKAGE.PROMPT.PRODUCTVERSIONFAILURE' value 'The expected version of the product was not found on the system.'
    OPatchInstall: Property 'PACKAGE.PROMPT.REBOOTNEEDED' value 'Do you want to reboot now to complete the installation of this package?'
    OPatchInstall: Property 'PACKAGE.PROMPT.RM.CONFIRM' value '&OK'
    OPatchInstall: Property 'PACKAGE.PROMPT.RM.DETECTION' value 'Please wait while we determine the list of files that need to be updated.'
    OPatchInstall: Property 'PACKAGE.PROMPT.RM.DISABLE' value 'Do &not close applications. (A Reboot will be required.)'
    OPatchInstall: Property 'PACKAGE.PROMPT.RM.ENABLE' value 'Automatically &close applications and attempt to restart them after setup is complete.'
    OPatchInstall: Property 'PACKAGE.PROMPT.RM.OPERATION' value 'The following applications should be closed before continuing the install:'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.DETAILSPREBODY' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition failed to install.'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALAPPNAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALREPORTEE' value 'Microsoft'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.INTROREG' value 'We apologize for the update installation failure'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINCAPTION' value 'Report Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition Installation Failure'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAININTROBOLD' value 'An error report containing information about the updates that failed installation has been generated.'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINNOREPORTBTN' value 'Cancel'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINPLEAREG' value 'Using the information in the report we can investigate and potentially fix the problem you experienced. We will treat this report as confidential and anonymous.'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINREPORTBTN' value 'Send Report'
    OPatchInstall: Property 'PACKAGE.RM.ENABLED' value '0'
    OPatchInstall: Property 'PACKAGE.RM.MINOS.VERSION' value '600'
    OPatchInstall: Property 'PACKAGE.STRING.CANCEL' value '&Cancel'
    OPatchInstall: Property 'PACKAGE.STRING.CANCELCONFIRMATION' value 'Are you sure you want to cancel setup?'
    OPatchInstall: Property 'PACKAGE.STRING.CONTINUE' value '&Continue'
    OPatchInstall: Property 'PACKAGE.STRING.DETECTING' value 'Please wait while update detection is being run.'
    OPatchInstall: Property 'PACKAGE.STRING.EULACHECKBOX' value 'Click here to &accept the Microsoft Software License Terms.'
    OPatchInstall: Property 'PACKAGE.STRING.EXTRACTING' value 'Extracting files, please wait...'
    OPatchInstall: Property 'PACKAGE.STRING.HELP' value 'Usage:
    /extract:path, extracts the content of the package to the path folder
    /log[:path to log file], enables verbose logging for the update installation
    /lang:lcid, sets the user interface to the specified locale when multiple locales are available within the package
    /quiet, runs the package in silent mode
    /passive, runs the update without any interaction from the user
    /norestart, prevents prompting of user when reboot of machine is needed
    /forcerestart, forced restart of machine once update is complete
    /?, shows this help message'
    OPatchInstall: Property 'PACKAGE.STRING.INSTALLING' value 'Please wait while the update is installed.'
    OPatchInstall: Property 'PACKAGE.SUCCESS.WITHERRORS' value 'The installation is complete. However, some updates were not applied (please see the log for additional details).'
    OPatchInstall: Property 'PATCH.FILEID.EULA' value 'volumelicense_eula_postrtm_en-us.txt'
    OPatchInstall: Property 'PATCH.LANG' value '1033'
    OPatchInstall: Property 'SYS.ARGS.EXTRACT' value '0'
    OPatchInstall: Property 'SYS.ARGS.EXTRACTPATH' value 'NONE'
    OPatchInstall: Property 'SYS.ARGS.EXTRACTPATHREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.EXTRACTREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.FORCERESTART' value '0'
    OPatchInstall: Property 'SYS.ARGS.FORCERESTARTREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.HELP' value '0'
    OPatchInstall: Property 'SYS.ARGS.HELPREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.LANG' value '0'
    OPatchInstall: Property 'SYS.ARGS.LANGREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.LANGVALUE' value 'NONE'
    OPatchInstall: Property 'SYS.ARGS.LANGVALUEREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.LOG' value '1'
    OPatchInstall: Property 'SYS.ARGS.LOGPATH' value 'NONE'
    OPatchInstall: Property 'SYS.ARGS.LOGPATHREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.LOGREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.NORESTART' value '0'
    OPatchInstall: Property 'SYS.ARGS.NORESTARTREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.PASSIVE' value '0'
    OPatchInstall: Property 'SYS.ARGS.PASSIVEREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.QUIET' value '0'
    OPatchInstall: Property 'SYS.ARGS.QUIETREADONLY' value '0'
    OPatchInstall: Property 'SYS.ERROR.ARG1' value 'NONE'
    OPatchInstall: Property 'SYS.ERROR.ARG2' value 'NONE'
    OPatchInstall: Property 'SYS.ERROR.ARG3' value 'NONE'
    OPatchInstall: Property 'SYS.ERROR.ARG4' value 'NONE'
    OPatchInstall: Property 'SYS.ERROR.ARG5' value 'NONE'
    OPatchInstall: Property 'SYS.ERROR.CODE' value '0'
    OPatchInstall: Property 'SYS.ERROR.INERROR' value '0'
    OPatchInstall: Property 'SYS.ERROR.TYPE' value 'NONE'
    OPatchInstall: Property 'SYS.LANG.LCID' value '1033'
    OPatchInstall: Property 'SYS.LANG.NAME' value 'en-us'
    OPatchInstall: Property 'SYS.LANG.RTL' value '0'
    OPatchInstall: Property 'SYS.MSI.VER' value '5.0.7601.17807'
    OPatchInstall: Property 'SYS.PATCH.NEEDREBOOT' value '0'
    OPatchInstall: Property 'SYS.PATCH.SUGGESTREBOOT' value '0'
    OPatchInstall: Property 'SYS.PROC.RESULT' value '0'
    OPatchInstall: Property 'SYS.WIN.ARCHITECTURE' value 'X64'
    OPatchInstall: Property 'SYS.WIN.PACKAGEPATH' value 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
    OPatchInstall: Property 'SYS.WIN.PLATFORM' value 'WINNT'
    OPatchInstall: Property 'SYS.WIN.SHELLVER' value '6.1.7601.18429'
    OPatchInstall: Property 'SYS.WIN.SPLEVEL' value '100'
    OPatchInstall: Property 'SYS.WIN.SYSTEMLCID' value '1033'
    OPatchInstall: Property 'SYS.WIN.USERADMIN' value '1'
    OPatchInstall: Property 'SYS.WIN.USERLCID' value '1033'
    OPatchInstall: Property 'SYS.WIN.VER' value '601'
    OPatchInstall: End of all properties
    OPatchInstall: Setting system property 'SYS.ARGS.LOGREADONLY' with value '1'
    OPatchInstall: Setting system property 'SYS.ARGS.LOGPATH' with value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
    OPatchInstall: Setting system property 'SYS.ARGS.LOGPATHREADONLY' with value '1'
    OPatchInstall: Done executing the IfFalse list
    OPatchInstall: CActionIf::execute ends
    OPatchInstall: Done executing the IfTrue list
    OPatchInstall: CActionIf::execute ends
    OPatchInstall: Done executing action
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.LOG' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'LOGPATH' to value '$(fullPath:SYS.ARGS.LOGPATH)'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: Executing action
    OPatchInstall: CActionIf::execute starts
    OPatchInstall: Begin evaluation of the condition
    OPatchInstall: The property 'SYS.ARGS.LOG' is equal to '1'
    OPatchInstall: Evaluation of the condition complete, the result is true
    OPatchInstall: Executing the IfTrue list
    OPatchInstall: Setting property 'LOGPATH' to value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
    OPatchInstall: Done executing the IfTrue list
    OPatchInstall: CActionIf::execute ends
    OPatchInstall: Done executing action
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionExtractFile
    OPatchInstall: CActionExtractFile::initFromElement starts
    OPatchInstall: Will extract the file with ID '$(PATCH.FILEID.EULA)' to the path '$(PACKAGE.PATH.TEMP)\eula.txt'
    OPatchInstall: CActionExtractFile::initFromElement ends
    OPatchInstall: Executing action
    OPatchInstall: CActionExtractFile::execute starts
    OPatchInstall: Will extract the file with ID 'volumelicense_eula_postrtm_en-us.txt' to the path 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
    OPatchInstall: Getting the data from the file 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
    OPatchInstall: Successfully retrieved the data location and size
    OPatchInstall: CActionExtractFile::execute ends
    OPatchInstall: Done executing action
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: Executing action
    OPatchInstall: CActionIf::execute starts
    OPatchInstall: Begin evaluation of the condition
    OPatchInstall: Executing CConditionBooleanOperator::evaluate
    OPatchInstall: The property 'SYS.ERROR.INERROR' exists
    OPatchInstall: The property 'SYS.ERROR.INERROR' is not equal to '1'
    OPatchInstall: Evaluation of the condition complete, the result is false
    OPatchInstall: Executing the IfFalse list
    OPatchInstall: Done executing the IfFalse list
    OPatchInstall: CActionIf::execute ends
    OPatchInstall: Done executing action
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'PACKAGE.NOEULA.PROMPT' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'PACKAGE.NOEULA.PROMPT' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPromptEULA
    OPatchInstall: CActionPromptEULA::initFromElement starts
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: No Accept button specified
    OPatchInstall: Cancel button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionPromptEULA::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPromptEULA
    OPatchInstall: CActionPromptEULA::initFromElement starts
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: No Accept button specified
    OPatchInstall: Cancel button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionPromptEULA::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: Executing action
    OPatchInstall: CActionIf::execute starts
    OPatchInstall: Begin evaluation of the condition
    OPatchInstall: The property 'SYS.ARGS.PASSIVE' is equal to '0'
    OPatchInstall: Evaluation of the condition complete, the result is true
    OPatchInstall: Executing the IfTrue list
    OPatchInstall: CActionIf::execute starts
    OPatchInstall: Begin evaluation of the condition
    OPatchInstall: The property 'PACKAGE.NOEULA.PROMPT' doesn't exist
    OPatchInstall: Evaluation of the condition complete, the result is false
    OPatchInstall: Executing the IfFalse list
    OPatchInstall: CActionPromptEULA::execute starts
    OPatchInstall: Running in full UI, will show the EULA dialog
    OPatchInstall: Reading EULA from file 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
    OPatchInstall: User Accepted the EULA, executing the Accept action list
    OPatchInstall: Finished executing the Accept action list
    OPatchInstall: CActionPromptEULA::execute ends
    OPatchInstall: Done executing the IfFalse list
    OPatchInstall: CActionIf::execute ends
    OPatchInstall: Done executing the IfTrue list
    OPatchInstall: CActionIf::execute ends
    OPatchInstall: Done executing action
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACT' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListOr>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to ''
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to 'NONE'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPromptFolder
    OPatchInstall: CActionPromptFolder::initFromElement starts
    OPatchInstall: Will prompt the user with the title '$(PACKAGE.PROMPT.EXTRACTFOLDER)' and store the folder in 'PACKAGE.EXTRACT.FOLDER' if cancelled will set 'PACKAGE.FOLDER.CANCELED'
    OPatchInstall: CActionPromptFolder::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'PACKAGE.FOLDER.CANCELED' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'PACKAGE.FOLDER.CANCELED' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17023'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLCANCELED)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionCreateFolder
    OPatchInstall: CActionFile::initFromElement starts
    OPatchInstall: Will check for file '$(PACKAGE.EXTRACT.FOLDER)'
    OPatchInstall: CActionFile::initFromElements ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17024'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.EXTRACTFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-nb-no.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.msp'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-nb-no.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.xml'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.msp'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.xml'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-prs-af.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.msp'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-prs-af.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.xml'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.msp'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.xml'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-th-th.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.msp'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-th-th.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.xml'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-ca-es.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ca-es.msp'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt

  • What the meaning of error occurred while iPad (-50)

    Can anyone help me what the meaning of error occurred while restoring this iPad (-50)

    Getting the same exact message.  I updated to IOS 5 and every nothing was organized into the folders it took hours to build.  I spent a ton of time cleaning ths mess up and I still get the the error "error occurred while restoring IPAD (-50).  At this point, I would be happy to just stop the messages.
    I am finding out about Apples support policies, which really suck!  it seems like a disproportionate amount of people have this error after updating, yet there isn't a single thing about it on the Apple site and if I want to speak with someone, it will cost me money.  Not a bad business strategy, I must say.

Maybe you are looking for