What's the maximum voltage for each LED on the LED panelette (SC-2345)?

I need to know whether or not, I can hook up the LED's of the LED panelette on a 15VDC circuit or not.

Hello;
Those LEDs are used with 5VDC. The best way to go about that is to use a external Voltage divisor to create the 5VDC to be connected to the LEDs.
Regards
Filipe A.
Applications Engineer
National Instruments

Similar Messages

Howdo I obtain a column with the calculated age for each member in the membershiplist? memberlist

The list contains 250 rows of names and their DoB (Date of Birth) = colum A and B.
The 3r colum should feature the automatically calculated AGE in years only = colum C from TODAY
It is a **** of a job to input the DATEDIFF formula for each cell (of colum C).
Can this be simplified?
Pleas help to find the right solution for Numbers '09 (version 2.1)
Thanks

Hi Lepe,
Assuming the first row of your table is used for labels (Name, DOB, Age, etc) and the data starts in row 2...
In C2, enter: =DATEDIF(B2,TODAY(),"Y")
Hover the mouse pointer over the Fill Handle (small circle) at the bottom right of the selected cell (C2).
When the mouse pointed turns to a black cross ( + ), click and drag the control down to fill the formula into the rest of the cells in the column.
For a 250 row table, there are other, more efficient ways of filling the formula down the column. These are described in the User Guide section referenced in Jerry's post.
Regards,
Barry

Can any one help. I have put music on my phone and its showing lots of the same covers for each song on the album, how do i make it into one album?

Hi Can anyone help? I have put music on my i-phone but its showing lots of the same album cover for each individual song, how can I create one cover for the album?

Do you have Sidebar ON?
iTunes > View > Show Sidebar.
Connect and select iPhone in iTunes Sidebar under DEVICES, choose the Music tab on the right, select Sync Music and whatever music you the on iPhone. Click Apply (bottom right)

Can I plot 2 locations at the same time for each record in a table

I'm trying to plot 2 Locations (2 points on a Power View Map) at the same time for each record/project in a table
I can plot 1 location for each project of course with no problem
but I'm trying to show the Begin Point and the
End Point for each project at the same time
Is this even possible?

First of all THANKS this worked!
But now I stumbled on another issue. So I actually have 3 tables (and I've adopted them to the file you sent)
Table 1 => TripData
Trip
LongLat
Location
Type
TypeCode
Size
NW Tour
47.568077, -122.320800
Seattle, WA
Begin
0
1
NW Tour
47.035608, -122.884812
Olympia, WA
End
1
1
Cali Trip
37.808848, -122.412580
San Francisco, CA
Begin
0
1
Cali Trip
32.682611, -117.178348
San Diego, CA
End
1
1
Table 2 =>
TripInfo
Trip
OneLongLat
NTP
NW Tour
47.568077, -122.320800
1/1/2015
Cali Trip
37.808848, -122.412580
1/5/2015
Table 3 =>
ALLTrips
Trip
Stop
Owner
NW Tour
1
Owner1
NW Tour
2
Owner2
NW Tour
3
Owner3
NW Tour
4
Owner4
NW Tour
5
Owner5
Cali Trip
1
Owner6
Cali Trip
2
Owner7
Cali Trip
3
Owner8
Cali Trip
4
Owner9
Cali Trip
5
Owner10
Cali Trip
6
Owner11
This is how the Diagram View looks like in PowerPivot
Trip Data => Trip Info <= ALLTrips
Since I don't know how to post pictures
The MAP FIELDS are as follows
SIZE - Count of Stop(s)
LOCATIONS - OneLongLat followed by
LongLat (drill down feature)
COLOR - Trip
The problem now happens with the drill down feature
You can either plot OneLongLat which is the general location for each trip
Or LongLat of each trip which shows the begin and end points
But you can't use the drill down feature???
If instead of OneLongLat you use a
State Column it actually works!!!
I wonder if it has to do with the fact that both locations used for the drill down are Long/Lat numbers???
Any suggestions???
And again Thanks for the response!

What's the maximum RAM for this notebook (ze2000)?

Hello,
i want to find out, what's the max memory for notebook ze2000 (p/n: EF062EA#ABU)
Andrius
LTU

Hi:
According to the service manual for your notebook at the link below, maximum is 2 x 512 MB for 1 GB.
Chapter 1, page 1-3.
http://h10032.www1.hp.com/ctg/Manual/c00400869.pdf
I would run the free Crucial Memory scanner and see what it reports. 1 GB seems pretty low for the hardware in your notebook.
http://www.crucial.com/systemscanner/
Paul

What is the maximum MBPS for the AirPort Extreme 5th Generation?

I am considering the E4200 v2 and AirPort Extreme routers. Can any give me the pros & cons for each? Price is about the same with the E4200 v2 $20 more.

For an excellent review of the 5th Gen AirPort Extreme Base Station (AEBSn), I would recommend that you check out the following SmallNetBuilder article. They not only provide comprehensive data on testing the base station's performance. but they also do so for a number of other router manufacturer products, including the Cisco/Linksys E4200V2 that you are also interested in.

What is ths maximum PDO read buffer size using the Series 2 CAN cards?

Does anyone know the maximum size for the PDO read buffer when using a Series 2 PCI NI-CAN card?

Hi
The maximum size for a single PDO does not depent on the series of your board it is depending on what else you are doing with the CANopen Library.
The board uses a specific shared memory to transfer messages between driver and hardware. The size of this memory fits nearly 350 messages.
The CANopen Config takes 100 messages for different services like NMT. That means the maximum size for a single PDO would be approx. 250 messages.
Or for 5 different PDOs 50 each. But normaly you can leave the buffer size to zero, thus the PDO Read would allways read the newest data.
This calculation is true for the board. That means you have 350 messages per board and 2 ports whould need to share the memory.
DirkW

FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

Hi there,
I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
database using the fillby query.
It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
each click of the fillby button.
also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered.
so actually 2 questions here:
1. how to populate a new row for each click of the fillby button
2. how to delete records from data grid view after an item has been entered
Thanks
Vishwas

Hello,
The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
Some examples
Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
The following article with code shows this but does not address adapters.
Conceptually speaking the code in the second code block shows how to get the new key
Public Class Form1
Private Sub StudentsBindingNavigatorSaveItem_Click(
sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
Me.Validate()
Me.StudentsBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
End Sub
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
End Sub
End Class
Get new key taken from
this article.
Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
Dim Success As Boolean = True
Try
Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
cmd.CommandText = InsertStatement
cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
cn.Open()
cmd.ExecuteNonQuery()
cmd.CommandText = "Select @@Identity"
Identfier = CInt(cmd.ExecuteScalar)
End Using
End Using
Catch ex As Exception
Success = False
End Try
Return Success
End Function
In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
Additional resources
http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Getting the first row for each group

Hi Everyone,
I have a query which returns a number of rows, all of which are valid. What I need to do is to get the first row for each group and work with those records.
For example ...
client flight startairport destairport stops
A fl123 LGW BKK 2
A fl124 LHR BKK 5
B fl432 LGW XYZ 7
B fl432 MAN ABC 8
.... etc.
I would need to return one row for Client A and one row for Client B (etc.) but find that I can't use the MIN function because it would return the MIN value for each column (i.e. mix up the rows). I also can use the rownum=1 because this would only return one row rather than one row per group (i.e. per client).
I have been investigating and most postings seem to say that it needs a second query to look up the first row for each grouping. This is a solution which would not really be practical because my query is already quite complex and incorporating duplicate subqueries would just make the whole thing much to cumbersome.
So what I really new is a "MIN by group" or a "TOP by group" or a "ROWNUM=1 by group" function.
Can anyone help me with this? I'm sure that there must be a command to handle this.
Regards and any thanks,
Alan Searle
Cologne, Germany

Something like this:
select *
from (
   select table1.*
   row_number() over (partition by col1, col2 order by col3, col4) rn
   from table1
where rn = 1In the "partition by" clause you place what you normally would "group by".
In the "order by" clause you define which will have row_number = 1.
Edit:
PS. The [url http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions004.htm#i81407]docs have more examples on using analytical functions ;-)
Edited by: Kim Berg Hansen on Sep 16, 2011 10:46 AM

How to activate a different sub-report for each row in the data set as main report page breaks on each row of data in the main dataset

I am going to try asking this same question a different way as I have yet to find a working solution to my problem. I have a main report and then 8 sub reports. My main report has one data set and returns one row of data per account number. One
of the fields in the main data set is called AccountProf. My main report displays one page per Account number and then calls a different sub report based on that account's AccountProf value. The sub reports take in the account number as a parameter
and get multiple rows of data to display that accounts usage formatted differntly for each AccountProf (hence the 8 different sub report.
So far I can figure out how to do everything but setting the visibility property of each sub-reports when I have multiple accounts. If I use the following expression for the visibility property on each sub report, it makes all the applicable sub report
for all the accounts requested visible at once:
=IIF(Fields!AccountProf.Value= "USE_PLUS_DMD",False,True)
*The value in bold USE_PLUS_DMD is different for each sub report.
Here is a look at what the main report look like:
Here is the main reports data set:

Hi JasonDWilson77,
According to your description, there is a main report and 8 sub reports in the report, you want to set visibility of sub reports, if no value is passed to the parameter of sub report, the sub report will not be displayed. If that is the case, please refer
to the following steps:
1. Create a new parameter named NewAccountNumber, set its data type the same as @AccountNumber, select Allow multiple values, set Visibility to be hidden, then set all available values to default values.
2. Right-click the first sub report and open Subreport Properties dialog box, click Parameters in left pane, set name to AccountNumber, then click (fx) button, type the expression like below:
=Parameters! NewAccountNumber(0)
3. Click Visibility in left pane, select Show or hide based on an expression, then click (fx) button and type the expression like below:
=IIF(InStr(Join(Parameters! AccountNumber.Value), Parameters!NewAccountNumber.Value(0))>0 , false,true)
4. Modify parameter of other sub reports like step2.
5. Set visibility of other sub reports like step3.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Setting up the correct voltages for PHC

Hi all!
I'm trying to use PHC to undervoltage my cpu, but I can't find how to set the correct voltages.
I installed phc-intel from AUR and /sys/devices/system/cpu/cpu0/cpufreq/phc_controls file contains the following line:
33:0 22:0 20:0 19:0 18:0 17:0 16:0 15:0 14:0 13:0 12:0 11:0 10:0 9:0 8:0
While in /etc/conf.d/phc-intel there's:
# voltage IDs to be set for all CPUs
VIDS=""
I read the wiki page about PHC, but I found only this:
[...]After the phc module is compiled and the lowest voltages are found[...]
and it's not really helpful...
Can anyone help me?
My CPU is an Intel i2720 processor.
Thanks a lot!

pernix wrote:
pernix wrote:I'll use the intel-phc-undervolt.bash file to see if it works.
It seems that it's quite useless: it determines the lowest available voltage, but starting from 0 it sets 0 for each FID. The question is: how can the voltage be zero???
It isn't. I remember reading about this on the ubuntuforums thread about it a few years ago. Basically, if it let's you go to 0, it means that the hardware wont accept values below its actual minimum. So it's okay for you to set your FIDs to 0 because your hardware will just go to its minimum.

Selecting the second result for each client...

Hi,
I have a table containing all the contacts we had with our clients.
We consider a file an active file from the moment there have been 2 contacts for that client.
Today somebody asked me "can you tell me how many new clients with an active file we have this year"
So what I actualy want to do now, is make a view containing the DATE of the SECOND CONTACT for each CLIENT_ID.
the table looks like this:
CONTACT_ID
CLIENT_ID
DATE
CONTACT_FORM (doesn't matter in this story)
REMARKS (doesn't matter in this story)
Can somebody assist me with this please?
Thanks in advance for your replies.
L
edit I do know how to make a view, that's not the problem :) in this case only the select query to make it is the problem.
edit 2 I made a little example
If I start with this table data:
CLIENT_ID || DATE           .... other columns here...
436     || 01-02-2011
328     || 05-04-2011
319     || 13-01-2011
220     || 03-09-2011
319     || 17-12-2011
220     || 25-11-2011
436     || 01-04-2011
436     || 01-04-2011than the view would have to make me end up with:
CLIENT_ID || DATE_OF_SECOND_CONTACT
436     || 01-04-2011
220     || 25-11-2011
319     || 17-12-2011(working with version 11.2.0.1.0)
Edited by: 901981 on 13-dec-2011 2:16

I hope this helps:
with t as
select 436 client_id, to_date('01-02-2011','DD-MM-YYYY') d from dual union all
select 328 client_id, to_date('05-04-2011','DD-MM-YYYY') d from dual union all
select 319 client_id, to_date('13-01-2011','DD-MM-YYYY') d from dual union all
select 220 client_id, to_date('03-09-2011','DD-MM-YYYY') d from dual union all
select 319 client_id, to_date('17-12-2011','DD-MM-YYYY') d from dual union all
select 220 client_id, to_date('25-11-2011','DD-MM-YYYY') d from dual union all
select 436 client_id, to_date('01-04-2011','DD-MM-YYYY') d from dual union all
select 436 client_id, to_date('01-04-2011','DD-MM-YYYY') d from dual
select client_id,
       to_char(d,'DD-MM-YYYY') d
from
select client_id,
         d,
         row_number() over (partition by client_id order by d) rn
from t
where rn=2; Edited by: hm on 13.12.2011 02:17
please try out this to see how it works:
with t as
select 436 client_id, to_date('01-02-2011','DD-MM-YYYY') d from dual union all
select 328 client_id, to_date('05-04-2011','DD-MM-YYYY') d from dual union all
select 319 client_id, to_date('13-01-2011','DD-MM-YYYY') d from dual union all
select 220 client_id, to_date('03-09-2011','DD-MM-YYYY') d from dual union all
select 319 client_id, to_date('17-12-2011','DD-MM-YYYY') d from dual union all
select 220 client_id, to_date('25-11-2011','DD-MM-YYYY') d from dual union all
select 436 client_id, to_date('01-04-2011','DD-MM-YYYY') d from dual union all
select 436 client_id, to_date('01-04-2011','DD-MM-YYYY') d from dual
select client_id,
       d,
       row_number() over (partition by client_id order by d) rn
from t;(By the way: in my opinion it is not a good idea to choose a keyword "DATE" as a column name. That the reason why I choose "d" in my example.)

Must use Step Input Keyboard prior to using midi controller? When I attempt to use my midi keyboard conteoller for step input, it won't work unless I input the first note in each track via the Step Input Keyboard. This doesn't seem right...

When I try to use my midi controller keyboard for step input, it won't work unless I input the first note in each track via the Step Input Keyboard.. What am I doing wrong?
Logic Studio 9.1.7, OS X 10.7.5

Hi
Playhead in the right place?
CCT

Grab a list of the latest note for each job when/if they start with set text

How would I look only to the latest [01-JobComment].[Creation_Date] where [01-JobComment].[text] starts with the text "AB001:" for each [05-Job].[Job_ID]?
SELECT [05-Job].Job, [01-JobComment].[CREATION_DATE], Mid([01-JobComment].[TEXT],1,6) AS AB001, [05-Job].Name, [05-Job].Owner, [05-Job].Type, [01-JobComment].CREATED_BY, [01-JobComment].CREATED_BY, [05-Job].Status, [05-Job].Owner
FROM [05-Job] INNER JOIN [01-JobComment] ON [05-Job].Job = [01-JobComment].JOB_ID
WHERE ((([01-JobComment].[CREATION_DATE])>[05-Job].[AsBuiltProof]) AND ((Mid([01-JobComment].[TEXT],1,6))="AB001:"))
ORDER BY [01-JobComment].[CREATION_DATE];

I'm not sure this is what you want:
SELECT [05-Job].Job, (SELECT Max(T.CREATION_DATE) FROM [01-JobComment] AS T WHERE T.JOB_ID=[01-JobComment].JOB_ID AND Left(T.[text],6)='AB001:') AS CreationDate, Left([01-JobComment].[TEXT],6) AS AB001, [05-Job].Name, [05-Job].Owner, [05-Job].Type, [01-JobComment].CREATED_BY,
[05-Job].Status
FROM [05-Job] INNER JOIN [01-JobComment] ON [05-Job].Job = [01-JobComment].JOB_ID
WHERE [01-JobComment].[CREATION_DATE]>[05-Job].[AsBuiltProof] AND Left([01-JobComment].[TEXT],6)="AB001:"
ORDER BY [01-JobComment].[CREATION_DATE];
Regards, Hans Vogelaar (http://www.eileenslounge.com)

What's the maximum voltage for each LED on the LED panelette (SC-2345)?

Similar Messages

Maybe you are looking for