What's up with my table? (link to site inside)

My domain name is still being registered but anyhow here is
my deal...
Check out a rough draft of my site here...
http://df31.dot5hosting.com/~vertical/
Now if you notice under the table where it says "New Posts"
it looks like
there is a tiny little cell about 2 pixels in height but the
thing is I've
checked my table and there is NOT a cell there, I only have
ten cells in my
table. What's up with that?
-Chris

slash 'n burn
cant beat it.
James Loudon
www.fatgraphics.com
websites::photography::video
"Chris Jumonville" <[email protected]> wrote in
message
news:efcikj$6ef$[email protected]..
> Ok disregard my question. I fixed it by simple deleting
the table and
> making a new one. Easy fix :)
>
>
> "Chris Jumonville" <[email protected]>
wrote in message
> news:efcigc$6bj$[email protected]..
>> My domain name is still being registered but anyhow
here is my deal...
>> Check out a rough draft of my site here...
>>
>>
http://df31.dot5hosting.com/~vertical/
>>
>> Now if you notice under the table where it says "New
Posts" it looks like
>> there is a tiny little cell about 2 pixels in height
but the thing is
>> I've checked my table and there is NOT a cell there,
I only have ten
>> cells in my table. What's up with that?
>>
>> -Chris
>>
>
>

Similar Messages

What is wrong with the table om page 2 (see attached file)

What is wrong with the table om page 2 (see attached file)

MySpecialSceenName wrote:
But there are several empty lines under the text...........
I'm guessing that by that you mean space for several lines, not empty paragraphs. This could be caused by any number of things, but not allowing hyphenation, or hyphantion rules that are too restictive might cause ID to be unable to break a line which would cause it to go into overset, as would possibly some combinations of Keep Options if there is more than one paragraph in the cell or if there is not enough room to fite the entire paragraph and you are just one line short with keep options requiring at least two lines be kept together at the end, for example. Applying No Break to a sting too wide for the cell would do it too.

C# - What's wrong with a table called JOBS? :(

Post Author: Gee
CA Forum: .NET
Hi
I've just moved up to .NET 2005. and am having a big problem right now with one report in particular.
The report uses an Oracle table called "JOBS". It worked just fine in .NET 2003. Now though, it comes up with the dreaded field name not known error.
So, I tried to just do a completely new report with just ONE field from the JOBS table on it. It doesn't want to know!
I then copied (so it was IDENTICAL) the table structure and data to a new one called "JOBSTEST". The simple report worked (once I'd changed it to use the JOBSTEST fields of course)
I deleted the original JOBS table, copied a new JOBS table from the JOBSTEST table and... it didn't work again!
So, what's wrong with having a table called "JOBS"? Because that seems to be the problem!
Oh... it works ok on the development machine. Just not any other. ALL other reports work fine!
Thank you so much for your time in helping me

Post Author: Gee
CA Forum: .NET
Hi
I've just moved up to .NET 2005. and am having a big problem right now with one report in particular.
The report uses an Oracle table called "JOBS". It worked just fine in .NET 2003. Now though, it comes up with the dreaded field name not known error.
So, I tried to just do a completely new report with just ONE field from the JOBS table on it. It doesn't want to know!
I then copied (so it was IDENTICAL) the table structure and data to a new one called "JOBSTEST". The simple report worked (once I'd changed it to use the JOBSTEST fields of course)
I deleted the original JOBS table, copied a new JOBS table from the JOBSTEST table and... it didn't work again!
So, what's wrong with having a table called "JOBS"? Because that seems to be the problem!
Oh... it works ok on the development machine. Just not any other. ALL other reports work fine!
Thank you so much for your time in helping me

What is wrong with PBO (table control)

Hi,
Another beginner's question. Unable to fill table control.
Following in my Program
report test_tab_con.
controls flights type tableview using screen 100.
data: ok_code type sy-ucomm,
       save_ok type sy-ucomm.
data: fill type i,
      begin of itab_con occurs 0,
      id type i,
      name(10) type c,
      address(20) type c,
      end of itab_con.
data: wa_itab like line of itab_con.
perform populate.
form populate.
itab_con-id = 1.
itab_con-name = 'ABCD'.
itab_con-address = 'Test Area'.
append itab_con.
itab_con-id = 2.
itab_con-name = 'XYZ'.
itab_con-address = 'Come again'.
append itab_con.
call screen 100.
endform.
module fill_table_control output.
move-corresponding wa_itab to flights.
endmodule.
module status_0100 output.
set pf-status 'SCREEN_100'.
describe table itab_con lines fill.
flights-lines = fill.
endmodule.
and my screen PBO is:
process before output.
loop at itab_con into wa_itab with control flights.
    module fill_table_control.
endloop.
module status_0100.
But finally I see empty table control. There is some option of w/ selColumn (i m not using this - is it mandatory for display?).
Regards,
Arpit

Still no luck. I am sure it is not being refresh onto the final screen. Just don't know how to get it done
Steps taken to create the UI using screen painter:
- Create screen
- Drag & drop the Table control element
- Press F6 to open dictionary/program fields view, selected itab_con and its fields. Dragged them on to the table control to create it.
- For all the three fields ID, Name, Address - double clicked on the table control and in screen painter attribute marked them as Input Field (possible). Tried it also by marking as Output field.
Do I need to do anything part of the screen painting?
I get three rows in the UI but the text is not visible. What else can be a miss here?
Regards,
Arpit

Facebook has not been loading properly for me since Feb. 22/14. Can you please check what is wrong with Firefox. The web-site Facebook works fine on Safari.

I've had issues with Facebook not loading certain areas of the web-site correctly or fully since Feb. 22. When I first go onto Facebook I am on the home page "news feed". Thing is when I click on the tab at the bottom of the news feed that says "see more", nothing is happening. It refuses to open the feed up to older posts which friends or myself have posted. Only about 6 - 8 posts at the max show on that home feed. That's it.
My other issue, also in Facebook is when I go to access my "messages". First click on the tab "messages" brings up a white page. Then if I refresh the page to see if it will load, the messages page loads very weird. It shows the last message I may have replied to at the bottom of the screen, but over lapping on top of the list of previous messages to the left of the page. Plus the page appears extremely different than it should. Just like it's been re-formatted or whatever.
Since these 2 issues started on Saturday afternoon I've switched over to the Safari browser on my iMac. On that browser Facebook is performing properly, as it should be. It's not overlapping messages. Plus the home feed isn't refusing to extend for me so that I may view older stories or posts by friends. All appears fine while accessing Facebook on the Safari browser. Not so while on Firefox. I am running the most up to date version of Firefox. "27.0.1" Plus I have a habit to clear the browser's history daily & restarting the browser as well as my iMac. So I do not believe those are my problems. I feel there may be something you guys there at Firefox should look into on this.
Thank you for your time.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item: 
[[Image:FirefoxSafeMode|width=520]] 
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

What to do with Domain Whilst Waiting for Site Development?

I have my hosting set up, my domains are registered but I am not ready to go live for a few weeks.
What should I do in the mean time?
Put up an "It's on its way!" message?
Put up a contact form and an "It's on its way!" message?
Nothing?
Thanks
Martin

Hi Martin
It would depend on what content you have.
Initially, I would recommend a custom 404 page with brief details of what is happening, similar to a 'site under construction' but actually with an explanation of what is to come. After all until the site is indexed by search engines no one should actual have the www address, but do not forget to update this page once you actually upload the site.
If you know what is to be included and have some details, then upload a 'holding' page with this content including any search engine terms/meta info, this way you can at least submit the site/page too the search engines, thus giving your client an advantage with the site being indexed by the search engine. Remember it does not have to be a full design at this point, just something to start the procedure.
Paula

What is wrong with one of my game sites on faacebook

When I go to play my Disney City Girl I get the shield and the grey triangle I just want to play my game and it safe game so is the other Disney game i play

If there is a shield icon to the left of the "Site Identity Button" (globe/padlock) on the location bar then that means that mixed active content is blocked.
*https://support.mozilla.org/kb/how-does-content-isnt-secure-affect-my-safety
*https://developer.mozilla.org/Security/MixedContent
If mixed passive content (e.g. images) is present then Firefox shows an exclamation mark to the left of the "Site Identity Button" (globe/padlock) on the location bar.
*https://addons.mozilla.org/firefox/addon/toggle-mixed-active-content/

What is the best approach to handle multiple FK with single table.

If two tables are joined with each other with more than one ways, for example
MAIN table is (col1, col2,....coln, person_creator_id, person_modifier_id)
PERSON table is (person_id, name, address,........ phone) etc
At database level PERSON_CREATOR_FK and PERSON_MODIFIER_FK are defined.
Objective is to create a report that shows
col1, col2...coln, person creator name, person modifier name
If above two objects are imported with FKs in a EUL and discoverer plus is used to create above report. On first inclusion of person name discoverer plus will ask you to pick the join (provided the checkbox to disable this feature is not checked). Once you pick 'person creator' join it will never allow you to pick person modifier name.
One solution is two create a custom folder with query like
select col1, col2,...coln,
pc.name, pc.address,.... pc.phone
pm.name, pm.address,.... pm.phone
from main m,
person pc,
person pm
where m.person_id_creator = pc.person_id
and m.person_id_modifier = pm.person_id
Second solution is to import the PERSON folder twice in EUL (optionally named one as perosn_creator and other as person_modifier) and manually define one join per table. i.e. join MAIN with PERSON_CREATOR on person_creator_fk and join MAIN with PERSON_MODIFIER table using person_modifier_fk.
Now discoverer plus will let you drag Name from each person folder without needing to resolve multiple joins.
Question is, what approach is better OR is there a better way?
With solution 1 you will not be able to use functions on folder items.
With solution 2 there is a EUL design overhead of including same object multiple times and then manually defining all join (or deleting unwanted joins), and this could be a problem when you have person_modifier and person_creator in nearly all tables. It could be more complicated if person table is further linked other tables and users want to see that information too. (for instance, if person address is stored in LOCATION table joined with location_id and user want to see both creator address and modifier address....now you will have to create multiple LOCATION folders).
A third solution could be to register a function in discoverer that return person name when person_id is passed. This will work perfectly for above requirement but a down side is the report will run slower if they need filters on person names (then function will be used in where clause). Also, this solution is very specific to above scenario, it will not work if you want the report developer the freedom to pick any attribute from person table (lets say, person table contain 50 attributes then its not a good idea to register 50 functions).
Any comments/suggestion will be appreciated.
thanks

Hi
In a roundabout way you have really answered your own question :-)
In my opinion, the best approach, although by all means not the only approach - see below) would be to have the object loaded as two folders with one join going to the first folder and the second join to the other folder. You would of course name the folders appropriately.
Here's a workflow that I use all of the time and one that I teach when I'm giving Discoverer Administrator training. It might help you:
1. Bring in the PERSON folder to begin with
2. Make all necessary adjustments to bring it up to deployment standard. These adjustments would be: folder name (E.g PERSON_CREATOR), item names, item placement, default positions, default aggregation and so on.
3. Create or assign the required lists of values
4. Create any required calculations
5. Create any required conditions
6. Create the first join from this folder to MAIN.
7. Click on the heading for the folder and press CTRL-C.
8. Click on the heading for the business area and press CTRL-V. A second copy of the folder, complete with all of the adjustments you made earlier will be inserted into the business area.
Note: joins are not copied, everything else is.
9. Rename this folder to say PERSON_MODIFIED
10. Rename the items as appropriate
11. Add a join from this folder to MAIN - you're done
Other ideas that I have used and work well would be to use a database view or create a complex folder. Either will work, In both cases you would need to join on some other column other than the ones you referred earlier.
I hope this helps
Best wishes
Michael

Best way to link user form with user table

Hi all.
What is the best way to link an user form with a user table (with all of the functions, add, update...)? I have created a simple form, and the question is next:
depending the type object of the user table (document, master...) i have facilities to imlement the basic operations in the form? if i create an UDO i have the functions but i want to use the form that i created with a screen painter.
Thanks.

Hi again i want add a new comment please.
If i want do all functions (add,update...) of my form in my user table, and i want my user table is a type document? how can add new lines in my user table with objet type document? because when i make the instance i nedd to say what type of document is (item,order...) and when i do an add(), not add() in my user table. In what moment or how can assign that the add,update functions... affect in my table?
Thanks again.

ORACLE EXPRESS: build a page with multiple forms linked to one table

hi,
im using oravle application express. APEX
i would like to build a page with multiple forms linked to one table (orders) , the page has 4 from each one with different order_id number (depending on filtering), and if the order is prepared click yes for each order and this 'YES' should be UPDATED AND SAVED to each order number in the same table with the press of one button.
i created all the form as (sql query)
and create one update process
(UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_1
WHERE ORDER_ID =:P10_ORDER_ID_1;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_2
WHERE ORDER_ID =:P10_ORDER_ID_2;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_3
WHERE ORDER_ID =:P10_ORDER_ID_3;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_4
WHERE ORDER_ID =:P10_ORDER_ID_4;
i dont know really if i can do that, but it appear hat it actually saving according to order_id number , but not all the time some time it saved the value as "null".
please guide me what is the correct way to do this.
I READ THIS ONE
http://stackoverflow.com/questions/7877396/apex-creating-a-page-with-multiple-forms-linked-to-multiple-related-tables
BUT IT WAS FOR MULTIPLE INSERT
thanks.

Sans,
I am no Apex expert, but with a situation as "complex" as yours, have you thought about creating a VIEW that joins these 7/8 tables, placing an INSTEAD OF trigger on that view to do all the business logic in the database, and base your application on the view?
This is the "thick-database" approach that has been gaining momentum of late. The idea is to put your business logic in the database wherever possible, and let the application (Form, Apex, J2EE, whatever) concentrate on UI issues,

What is the better way to change name of a site with paths and links?

Hi!
i m using dreamweaver cs4 and i have a site already configured on dreamweaver
i need to change the name of the site and at the same time, every path names and every links
This site has about 50 pages so i would like to know what is the better steps to do for modified the name of the site unless problem?
I read the informations about 'manage site' but its not clear for me about links and path names!!
thank you

Just use site manager to change the site name. Nothing complicated with that.
What exactly do you mean by changing path names? Do you want to change the name of folders in the site? If so, just change them within DW and it will prompt if you want to update links.

How to insert into 2 tables from the same page (with one button link)

Hi,
I have the following 2 tables....
Employees
emp_id number not null
name varchar2(30) not null
email varchar2(50)
hire_date date
dept_id number
PK = emp_id
FK = dept_id
Notes
note_id number not null
added_on date not null
added_by varchar2(30) not null
note varchar2(4000)
emp_id number not null
PK = note_id
FK = emp_id
I want to do an insert into both tables via the application and also via the same page (with one button link). I have made a form to add an employee with an add button - adding an employee is no problem.
Now, on the same page, I have added a html text area in another region, where the user can write a note. But how do I get the note to insert into the Notes table when the user clicks the add button?
In other words, when the user clicks 'add', the employee information should be inserted into the Employees table and the note should be inserted into the Notes table.
How do I go about doing this?
Thanks.

Hi,
These are my After Submit Processes...
After Submit
30     Process Row of NOTES     Automatic Row Processing (DML)     Unconditional
30     Process Row of EMPLOYEES     Automatic Row Processing (DML)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
50     Insert into Tables     PL/SQL anonymous block     Conditional
My pl/sql code is the same as posted earlier.
Upon inserting data into the forms and clicking the add button, I get this error...
ORA-06550: line 1, column 102: PL/SQL: ORA-00904: "NOTES": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
     Error      Unable to process row of table EMPLOYEES.
Is there something wrong with the pl/sql code or is it something else?

Accessibility Tags - What to do with Table of Contents & More

I am looking for some help and advice regarding tagging a PDF document for accessibility using Acrobat 9 Pro.
Until now, the most I've ever done with Acrobat is create the occasional straight-text document and a few simple forms. But my boss has asked me to tag a programming manual for accessibility and I'm a little lost. There are a lot of both images and code samples in this text that I have no idea how to work with because the automatic tagging seems to have gone haywire.
I downloaded the Acrobat 9 Pro Accessibility Repair Workflow document and have done the following:
Determined that my document is not a scanned document.
Determined that there are no forms or buttons in this document.
Set the language to English.
Set the document security to "no security".
Determined that the document has bookmarks.
Determined that the document is not a tagged document.
Run the Accessibility Full Check.
This is where I ran into problems--both because of the nature of the document and my own ignorance of the "making accessible" process.
My table of contents is split up into multiple areas shown as tables but the individual items in the table are irregularly identified--I have no clue how to get them to appear correctly. Any tips would be appreciated. Should the Table of Contents even be a table? I know it's called a table, but it has multiple levels and I'm just not sure what to do with it.
There are also several tables in the document. They appear mostly OK, but Acrobat seems to think that the tables are made up of individual figures and produces "No alternate text for Figure" errors on some of them.
Finally, how on earth do I do text flow on code?? The code is all text, not images.
If anyone knows anything about this whole accessibility thing I would greatly appreciate your input.
Thank you!
Jenn

It may actually be faster to save it as a DOC file. The formatting may get messed up, but fixing that may be faster than doing all of the tagging you need to do. At the end, you have a document that can easily be modified in the future and recreated in PDF form. The long-term workflow should be better. My guess you will find that setting up a style sheet in WORD (or using an existing one) will be easy to use in addressing the issues. When I think of setting a bookmark in some location, I think of the work in setting just one bookmark manually in Acrobat. I think that WORD would actually be easier if the file transfer is readonably. Worth a try anyway.

I have iPad with my id linked to emarati stores, but off late I am using it in India. Now if I am going to iTunes to purchase a app it is now doing . Please tell me what should I do . Thanks

I have iPad linked with my id linked to emarati stores but off late I am using it in India . Now when I go to iTunes stores to purchase an app it is not allowing . Please help to solve the problem ?

What happens when you try to buy/download an app, do you get any error messages ?
If you are getting a 'not in this store' message then try going to the bottom of the Featured tab in the App Store app on your iPhone and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select your country.
If it's a different problem ... ?

Linking user table with system table

Hello, I'm trying to link a user table with IC table in order to asign many sales person to a customer.
I've created a new button in the IC form. When clicked a new form is opened to asign sales person to the IC. Now I need to retrieve the records assigned to this IC. How can I do that???
Regards.
Angel.

Hi Angel,
I would put a matrix in the new form where you could see/asign/delete the sales person.
Have a look at this post where you can find a great code from Sebastian Danober to fill a matrix from a recordset.
Another option could be to modify the existing IC form and add a new folder with a matrix where you can manage the sales person.
Check this other post with code for adding folder to an existing form.
Regards,
Ibai Peñ

What's up with my table? (link to site inside)

Similar Messages

Maybe you are looking for