What SAP function is used to get current system time?

Hello All:
I heard there is an SAP function to get system time. It was "gettime" or something! Could anyone please tell me what the function is?
Thanks.
Mithun

Like this:
DATA tt TYPE uzeit.
GET TIME FIELD tt.
This will reset sy-uzeit as well.
Hmm... it appears I am mistaken. SY-UZEIT always seems to have the current time. I think this is a change from earlier releases.
Rob
Message was edited by:
Rob Burbank

Similar Messages

Current System Time in Cold Fusion

Hi,
I am getting the current system Date as below:
<cfset todaydate = CreateODBCDate(now())/>
How to get current system time in coldfusion in a similar way
and what is the syntax for it.
<cfset currenttime = XXXXXXXXXXX/> which should be of
24 hrs time format
Could anyone please help me on this
Thanks,
Cold Fusion Beginner

<cfset currenttime = XXXXXXXXXXX/> which should be of
24 hrs time format
<cfset currenttime = now()>
That will be a date-time object of the current time. If you
would like
that formated in a standard 24 hour format:
<cfset currenttime = timeFormat(now(), "HH:mm:ss")>
The 'HH' time format mask is for hours in the 24 hour clock;
'hh' will
give you hours in a 12 hour format.

What sqlite version is used in the current AIR versions?

What sqlite version is used in the current Adobe AIR versions? Is there a possibility to get the sqlite version number which is used in current adobe air version?
I want to know if sqlite supports "locking" in Adobe AIR. I want to use one sqlite database file on a server and multiple clients should have access to the file (INSERT, UPDATE, DELETE).

http://forums.adobe.com/message/3586411
2.6 use 3.6.16. It's not visible in the public doc

Which SQL function to use to get previous month's data?

Hi
The reporting need: Display of two month's payroll run results....current and previous (based on the parameter passed) in Oracle Discoverer.
Data source: A table in which run result values are stored. Of course to be linked to number of other tables.
Can somebody guide me on which SQL function to use to get the data for previous month?
Secondly, as Discoverer does not support parameters, I cannot put parameter in the query itself. I'll be applying parameter later while generating my report.
Please advice.
Thanks and regards,
Aparna

It's not very clear in my head... but you can try :
SQL> select * from test;
ENAM        SAL DT
TOTO       1000 30/05/06
TOTO       1001 20/04/06
TOTO       1002 11/03/06
TATA       2000 30/05/06
TATA       1500 20/04/06
TUTU       3500 30/05/06
6 rows selected.
SQL> select ename, dt, sal currmonth,
            case when trunc(lag(dt,1,dt) over (partition by ename order by dt),'MM') = trunc(add_months(dt,-1),'MM')
                 then lag(sal,1,sal) over (partition by ename order by dt)
                 else null end prevmonth
     from   test
SQL> /
ENAM DT        CURRMONTH PREVMONTH
TATA 20/04/06       1500
TATA 30/05/06       2000       1500
TOTO 11/03/06       1002
TOTO 20/04/06       1001       1002
TOTO 30/05/06       1000       1001
TUTU 30/05/06       3500
6 rows selected.
SQL>
SQL> Nicolas.
Just an additional question : do the previous month is current month-1, or is there hole in month suite (e.g. the previous month can be current month-2) ?
Message was edited by:
N. Gasparotto

What api would I use to get the number of chars in string?

What api would I use to get the number of chars in string?

Assuming that you really mean that you want the number of charaters in a String (not string), that would be documented in java.lang.String
The method is length()

What are function modules used in alv,and its explanation

what are function modules used in alv,and its explanation

hi..
The important function modules are
Reuse_alv_fieldcatalog_merge
Reuse_alv_list_display
Reuse_alv_events_get
Reuse_alv_grid_display
Reuse_alv_commentary_write.
REUSE_ALV_FIELDCATALOG_MERGE
 This function module is used to populate a field catalog which is essential to display the data in ALV.
 If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter (I_structure_name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
Note : Fieldcatalog can be filled manually also by filling up all the required details into the internal table
The important parameters are:
 1. Export:
 a. I_program_name : report id
 b. I_internal_tabname : the internal output table
 c. I_inclname : include or the report name where all
 the dynamic forms are handled.
 2. Changing
 ct_fieldcat : an internal table with the type
 SLIS_T_FIELDCAT_ALV which is declared in the
 type pool SLIS.
REUSE_ALV_LIST_DISPLAY
This is the function module which prints the data.
The important parameters are:
1. Export:
 I_callback_program : report id
 I_bypassing_buffer : X
 I_buffer_active :
 I_callback_pf_status_set : routine where a user can set
 his own pf status or change the
 functionality of the existing pf status.
 I_callback_user_command : routine where the function codes are
 handled.
 I_structure name : name of the dictionary table
 Is_Layout : structure to set the layout of the report
 It_fieldcat : internal table with the list of all fields and their
 attributes which are to be printed (this table
 can be populated automatically by the function
 REUSE_ALV_FIELDCATALOG_MERGE
 It_events : internal table with a list of all possible events
 of ALV and their corresponding form names.
2. Tables:
 a. t_outtab : internal table with the data to be output
REUSE_ALV_EVENTS_GET: 
 Returns table of possible events for a a list type
1. Import:
 Et_Events :
 The event table is returned with all possible CALLBACK events for the specified list type (column NAME). For events to be processed by the Callback, their FORM field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field FORM filled and the entry modified using constants from the type pool SLIS.
2. Export:
 I_list_type:
 0 = simple list REUSE_ALV_LIST_DISPLAY
 1 = hierarchical-sequential list
 REUSE_ALV_HIERSEQ_LIST_DISPLAY
 2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
 3 = hierarchical-sequential block list
 REUSE_ALV_BLOCK_LIST_HS_APPEND
REUSE_ALV_GRID_DISPLAY
A new function from 4.6 version, to display the results in grid rather than a
preview.
Parameters : same as reuse_alv_list_display
REUSE_ALV_COMMENTARY_WRITE
This is used in the Top-of-page event to print the headings and other
comments for the list.
It_list_commentary : Internal table with the headings of the type
 slis_t_listheader.
 This internal table has three fields:
 Typ : H - header, S - selection, A - action
 Key : only when typ is S.
 Info : the text to be printed
plz reward pts if helpful.
regards
vijay.

I get an "install failed" message. "Recovery system can't be created-click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

I get an "install failed" message. "Recovery system can't be created—click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

The first time I attempted to install ML was on a late 2011 MBP. It ran for three minutes then gave me the error message: Could not install OSX due to an unexpected error. I was using the original ML install app, not a USB or other drive.
After a couple of restarts wiht the same result I saw a message to the effect that the install was trying to close open apps. I closed apps manually a few times to no avail. I shut down instead of restarting then booted into Safe mode (hold down the shift key when starting) and that did it. The install went smoothly after that.
I since installed ML in two iMacs using a cloned copy of the install app on a USB drive. This time I shut down the computers and booted into Safe Mode first and there were no problems.
I don't know if this issue is the one causing you these problems but it is a simple enough solution to try.
Jay

Function Module for getting the System time.

Hello All,
Which is the Function Module used in APO to get the system time?
Thanks for your response in advance.
Regards, Chirag

Hi Chirag,
Please try the following function modules
1) /SAPAPO/CRES_GET_TIMESTREAM_BT
2) /SAPAPO/OM_TIME_GET
The field name for system time is UZEIT under
structure SYST
Also try
3) CALENDAR_GET_TIMESTAMP
4) SAL_CSM_RECEIVER
I guess the third one will have your required data
Regards
R. Senthil Mareeswaran.

How cost;ly it is to get the current system time

I am using this call "System.currentTimeMillis()" to get the current system time. I need to now how costly it is to get the current system time.

Why don't you time it -:) Run it 10000 times and print the first and last result. The difference is the time it took.

How to fetch current system time in milliseconds using AppleScript?

I need to write the actual systemtime hh:mm:ss.msc into a field of FileMaker by using AppleScript (as FileMaker does still not support TimeStamps down to milli seconds) - now, how to realize that?
Any help is welcome - Thanx

Hi Mathur,
kindly help me in mapping a field in which I have to map current system time.
I think there is no standard function for time like the date so do i write a UDF for the same or any other way an in case a UDF than please help in that.
Mathur no need to write UDF for that..
Use standard function Current date-------> In that (Target Format) u have to specify the time i.e: HHmmss
Thats it..... Noe use this function as u like...
Satya Kumar

How to pass Current System time in the target field?

Hi Experts
kindly help me in mapping a field in which I have to map current system time.
I think there is no standard function for time like the date so do i write a UDF for the same or any other way an in case a UDF than please help in that.
Thanks
Aprajita

Hi Mathur,
kindly help me in mapping a field in which I have to map current system time.
I think there is no standard function for time like the date so do i write a UDF for the same or any other way an in case a UDF than please help in that.
Mathur no need to write UDF for that..
Use standard function Current date-------> In that (Target Format) u have to specify the time i.e: HHmmss
Thats it..... Noe use this function as u like...
Satya Kumar

To get the system time in milliseconds

i want to get the system time in milliseconds
eventhough the MLS(milliseconds) is given in the select statement as follows,
sql>select to_char(sysdate,'MON:DD:YYYY.HH:HH:MI:SS:MLS') "NOW" from dual;
does not seem to work.
it throws the error that
ORA-01821: date format not recognized
please give a solution
thanks in advance
null

Hi,
Yes, any of Oracle tools could not provide the milliseconds.
Then why cant not use external procedures (RPC) and get a time string from OS.
These are steps:
1. Create a C shared library.
(Some times U have to go for OCI programs.)
Milliseconds provision is there in C. ( use tm struct). Make a string as ur format by using any string functions in C or sprintf(). By using return, return this string.
Here error may come, if u are using pure C. Better to go for OCI call back methods.
2. Create oracle library and attach this shared libary with it.
3. Create external procedure/function and connect this.
If u want code, I can post it here.
with regards,
Boby Jose Thekkanth,
Dharma Computers(P) Ltd.
Bangalore-India.
www.dharma.com.
null

Getting accurate System time to milliseconds

I have written a program which needs to do following two things
1. make current thread sleep by some value in range 1 to 100 milliseconds
2. Get current system, acurate to maximum accurate value in miliseconds
as Java on Windows does not gurantee that Thread will sleep for the specified milliseconds and system time is also approximate, I need a solution that provides the guranteed accuracy for above two cases.
Please help!!!
Thanks in advance

I have created a udp client/server. I am able to regulate the rate of packets (approx) on server, but the client time is shifting(slowing down).
The basic function of client is to put set a variable client recieve time to the time on client and send packet back to server (to calculate delay on n/w).
The server is sending data at correct timing (approximate), but the recieve time at client is shifting down slowly.
I reduced the load on client by just discarding currrent packet and goto recieve next, but the delay is still there.
The data captured is this (SS is Server Send time, CR is Client Recieve time)
SS: 1108653459464 CR: 1108653447161
SS: 1108653460464 CR: 1108653448161
SS: 1108653461464 CR: 1108653449161
SS: 1108653462464 CR: 1108653450161
SS: 1108653463464 CR: 1108653451161
SS: 1108653464464 CR: 1108653452161
SS: 1108653465464 CR: 1108653453160
SS: 1108653466464 CR: 1108653454160
SS: 1108653467464 CR: 1108653455160
SS: 1108653468464 CR: 1108653456160
SS: 1108653469464 CR: 1108653457160
SS: 1108653470464 CR: 1108653458160
SS: 1108653471463 CR: 1108653459160
SS: 1108653472479 CR: 1108653460145
SS: 1108653473463 CR: 1108653461129
// server time reduced by just 1 millisecond but client got mad
SS: 1108653474463 CR: 1108653462129
SS: 1108653475463 CR: 1108653463129
SS: 1108653476463 CR: 1108653464129
SS: 1108653477463 CR: 1108653465129
SS: 1108653478463 CR: 1108653466145
SS: 1108653479463 CR: 1108653467145
SS: 1108653480479 CR: 1108653468145
SS: 1108653481463 CR: 1108653469129
SS: 1108653482463 CR: 1108653470129
SS: 1108653483463 CR: 1108653471129
SS: 1108653484463 CR: 1108653472129
SS: 1108653485463 CR: 1108653473129
SS: 1108653486463 CR: 1108653474129
SS: 1108653487463 CR: 1108653475129
SS: 1108653488479 CR: 1108653476129
SS: 1108653489463 CR: 1108653477113
SS: 1108653490463 CR: 1108653478129
SS: 1108653491463 CR: 1108653479129
SS: 1108653492463 CR: 1108653480129

How can i get the System Time from the other host

I want to get the System Time from the other host in the LAN,How can I get the Time using Java.
Such as I am in WIN 2000 and I have a Unix host in LAN, I want to get unix host System time, How can I do it.

Open a socket to port 13 and read a string with the time.
-or-
Open a socket to port 27 and read 4 bytes that are a network order timestamp
Assuming that your UNIX machine has those services running, most do

How to compare the current system time with two timing?

want to get the current system time and compare with the two different timing example startwindow time as 2:00:00AM and endWindowTime as 6:00:00AM. if my current system time falls between these window i have to execute my rest of the code.
my below code works for fine for JAVA 1.6 version when i do the same code with JAVA 1.4 i am getting different date and time
String starTime=(String) NightlyvendorStatus[0].getPropertyValue("startTime");
String endTime=(String) NightlyvendorStatus[0].getPropertyValue("endTime");
Date windowStarttime = new SimpleDateFormat("HH:mm:ss").parse(starTime);
Date windowEndtime = new SimpleDateFormat("HH:mm:ss").parse(endTime);
Date systemdate = new Date();
SimpleDateFormat parser = new SimpleDateFormat("HH:mm:ss");
String systemTime=parser.format(systemdate);
Date currentTime = new SimpleDateFormat("HH:mm:ss").parse(systemTime);
if (currentTime.after(windowStarttime) && currentTime.before(windowEndtime)){
--- rest logic here---}
the output from JAVA 1.4 IS Thu Jan 01 02:00:00 GMT 1970 Thu Jan 01 06:00:00 GMT 1970 Thu Jan 01 03:23:00 GMT 1970
HOW TO DO this logic..

Hi,
You can try converting dates into timestamp and compare just like as comparing two integers variables.
Regards,
Anshul

What SAP function is used to get current system time?

Similar Messages

Maybe you are looking for