What should be specified in object reference field in the first step of sequence file in test stand

Test stand object Reference field- <The expression cannot be empty>
It is showing an error like "The .Net property can not be accessible
Object Reference not set to an instance of an object".
How it can be resolved?
Attachments:
ex1.jpg ‏2305 KB

I am
using Singleton Class in .Net. So I need not create object in TestStand. The Get
property of the class will return its own class object. So the Class Reference
should be empty only.
When I
choose the property manually, I am getting this error. This I am getting only
when I create this step through C# TestStand APIs. Please help me to remove this
error in the Class Reference field using TestStand
APIs.
Attachments:
ex2.jpg ‏24 KB

Similar Messages

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

To pass parameter values to the object reference of action step in sequence file of teststand programatically using C#.

//Initialize the Engine
            EngineClass myEngine = new EngineClass();
            myEngine.LoadTypePaletteFilesEx(TypeConflictHandlerTypes.ConflictHandler_Prompt, 0);
            Step myStep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname,StepTypes.StepType_Action);
            myStep.Name = "object";
            DotNetModule dotnetmodule = myStep.Module as DotNetModule;
            dotnetmodule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File,@"C:sequence.dll");
            dotnetmodule.ClassName = "CN";
            dotnetmodule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
            dotnetmodule.MemberName = "ISI";
mySequence.Locals.NewSubProperty("object", PropertyValueTypes.PropValType_Reference, false, "", 0);
Sequence mySequence = myEngine.NewSequence();
            mySequence.Locals.NewSubProperty(varName, PropertyValueTypes.PropValType_Reference, false, String.Empty, 0);
mySequence.InsertStep(myStep, 0, StepGroups.StepGroup_Main);
            SequenceFile seqFile = myEngine.NewSequenceFile();
            seqFile.InsertSequence(mySequence);
seqFile.Save("C:\\mySeq.seq");
I have done this,dynamically creating a sequence file in teststand programatically through c#.
Problem is
1.I created an action step and object Reference variable for the step, but i am not able to pass parameter values to the objectReference
2.I am not able to load the sequence in to the main Sequence of the sequence file in the teststand. How can I do these two things.

Hi,
have you ever followed on my Links ?!?!?
If not please jump to this one
http://forums.ni.com/ni/board/message?board.id=330&thread.id=26880
and read the the answer from Mannoch
starting with this words:
Anthony -
Currently, functionality for retrieving the Metadata Token for a class constructor or member is not fully provided in the TestStand .NET Adapter API. The DotNetModule.GetConstructorMetadataToken() and DotNetModule.GetMetadataToken() methods only return the correct Metadata Token when the member/constructor prototypes have already been loaded. Thus, in the case of your code, when you call DotNetModule.GetMetadataToken(), the method is returning -1 because the member prototype for the Step you are referring to has not yet been loaded.
That means have to do a workaround for your stuff.
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Reference field in the smartform

hello,
can you help me to specify reference field in smartform.
That means,
i had created the structure in which there is a field VEMNG for which the reference field is VEMEH from reference table VEPO.
Then i had written the program and created the internal table of type that structure and call the functional module which is calling the smartform by passing the internal table.
Now after executing it is giving runtime error as VEMNG is not present in the smartform. That means we have to specify the reference field in the smartform for that field.
i had specify in the smartform-global defination-currency/qty field as
VEMNG VEMEH QUAN as field name, reference field and data type.
But the error has come while doing syntaz check in smartform and the error is :- Global Definitions:Field "BRGEW" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement . . . . . . . . . .
Please help me to resolve this error in the smatform.

Hi ,
If you r passing quantity and currency fields to smartforms then in
Globaldefinitions-> currency fields
u have to specify the fields as well as its uniot field .
For example u r using field erfmg or menge then u have to use
fieldname = it_itab-erfmg and reference field as it_mseg-erfme
field name = it_itab-menge and reference field as it_mseg-meins
and change the data type to curr or quan as required .
Regards

I want to play a song I bought but when I press play it says I need to authorize my PC but when I put in my Apple ID it says its already authorized. What should I do to be able to play the song?

I want to play a song I bought but when I press play it says I need to authorize my PC but when I put in my Apple ID it says its already authorized. What should I do to be able to play the song?

Delete and redownload it if doing so is free in your country.
(94038)

TS1363 My iPod got stolen and I just want to get my visa card off of it. What should I do? I don't have the serial number for my iPod anymore either cause I got it along time ago... I never saw this happening.

My iPod got stolen and I just want to get my visa card off of it. What should I do? I don't have the serial number for my iPod anymore either cause I got it along time ago... I never saw this happening.

Sorry to hear that.
Lost or Stolen

How to make the Reference field in the in Accounting Tab a required field.

Hi,
Can i make the REference field in the Accounting tab required. I want to enter contract number from RE in that field.
Thank you.
Rachelle

Hi,
Goto t.code OVA2 select A-sales header and then click on procedures in the left--> select the procedure in which you want to incolude this field and new entries the table name is VBAK and field is XBLNR for the reference field in the accouting tab and accordingly assign the status 01 or 02 as per your requirement.
Then you need to assign the incompletion procedure to the sales document type in VOV8.
Regards,
Gopal.

TS2771 My ipod touch will not hare no matter what and I've tried many different cables and different ways to charge it. What should I do? If I complain to the Apple store co. will they replace my ipod for free?

My ipod touch will not hare no matter what and I've tried many different cables and different ways to charge it. What should I do? If I complain to the Apple store co. will they replace my ipod for free?

- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

I would like to buy an iPhone for my friend in Iceland. Two questions: will the phone work with complete utility in Iceland, and if so, what should I do to confirgure it while in the USA so that it can have full utility in Iceland?

I would like to buy an iPhone for my friend in Iceland. Two questions: will the phone work with complete utility in Iceland, and if so, what should I do to confirgure it while in the USA so that it can have full utility in Iceland?

Bad idea. There are no supported iPhone carriers in Iceland, thus some features may or may not work. Further, there will be no warranty or support for a US purchased iPhone in Iceland...your friend will be on their own. If you still want to go down this road, make sure you purchase an officially unlocked iPhone(GSM model) directly from Apple.

I have Mac OS X Version 10.6.8 ,I want to buy the updated operating system that puts iMessage and Facetime on my Macbook Pro. What should I search for, and then purchase, in the App Store?

I have Mac OS X Version 10.6.8 ,I want to buy the updated operating system that puts iMessage and Facetime on my Macbook Pro. What should I search for, and then purchase, in the App Store?

FaceTime can run in the version of OS X that you currently have. To get Messageyou need Mountain Lion. The protocol used by Messages is iMeassage.
The question is does your MBP meet the specs for Mountain Lion.
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory
8 GB or more of available space

I just purchased creative cloud. What is the first step I should be taking?

I just purchased creative cloud. What is the first step I should be taking?
I'm unable to download the applications and I'm not sure why. I thought it had something to do with me having the trial prior so I went ahead and deleted it. And I still cannot download the applications. Am I missing a specific step in all of this? I was under the assumption that when I purchased creative cloud, it would be some sort of prompt to install the program (the way adobe normally works) then I would be able to install the applications separately.

Hi Poe7,
Welcome to the Community & thanks for being the Creative cloud member!
The first thing is to download Creative cloud desktop app which will help you to download all the apps available, go to https://creative.adobe.com/products/creative-cloud and download it.
Once downloaded, launch it and select any product to start downloading/installing within the app.
Thanks!
Ankit

HT2905 what should i do if "display duplicate" in the first step does not show up ?

what should i do if "display duplicate" in the first step does not show up ?

If you're using iTunes 11, they've changed where the duplicate option is. You can now find it under the View menu. Note, if you hold Option on that menu, it'll give you the "exact" option.

I'm a newbie to Blackberry - What is the first step to correctly using the instrument ?

I'm a newbie to Blackberry - What is the first step to correctly using the instrument ?
I just acquired my first blackberry phone model-9810. What are the different simple steps or the procedure that I should follow to correctly use this instrument, i.e., telephone features first, internet features later. Your assistance to a newbie is highly appreciated. All the best!
Solved!
Go to Solution.

Yes.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

HT4859 How long should it take to back up iphone for the first time with about 6 gigs?

How long should it take to back up iphone for the first time with about 6 gigs?

Welcome to the Apple Community.
The first back up to iCloud may take some considerable time. Just how long isn't really possible to say without knowing how much is in your back up and your connection speed.
What many people don't realise is that upload speeds are often significantly less than download speeds, so for example a user may have a download speed of 40 Mbps, but only 1 Mbps for uploading. As a rough guide it will take around 2 ¼ hours to upload 1 GB of data at 1 Mbps.

I'm trying to create my icloud account with my apple id but in the first step it tells me to check my e.mail and there is no message in my inbox. What is happening ?

I'm trying to create a icloud account but I can't go on from the first step. The sistem ask me to check my e.mail and when I go to my inbox there is nothing. And it keep saying that I dind't verify my e,mail. What is happening please.

No-one seems to know, or have any idea how to solve the problem!

What should be specified in object reference field in the first step of sequence file in test stand

Similar Messages

Maybe you are looking for