What techniques are used to create these images?

The artist who created the pictures shown on the links below uses Photoshop. Does anyone know what tools are used for this?
http://www.chrisjordan.com/gallery/rtn/#plastic-bottles
http://www.chrisjordan.com/gallery/rtn/#cell-phones

Did you click on each of those images to see them reach full size in Flash animation?
Here are crops from the bottles and cell phones at 100% resolution:
The Flash zoom-out and zoom-in animation is done in programming the code of the web page, as you can see by "Inspecting the Element" on the web browser page:
I cannot give you any further information or assistance, as I don't deal with web programming.
As far as I can tell, the "technique" used here is pretty straight forward:
Take a picture with a digital camera, then program the web page to repeat the image a bunch of times and display the zooming in and out in Flash animation.

Similar Messages

What resources are used for "create index" ?

In the context of creating an index on a heavily loaded table....
What Oracle resources are consumed>? Any caches or buffers? Sort files? Temp Tables?
(trying to speed up an index create)

Like any other read/write database activities, CREATE INDEX uses blocks in the buffer cache. If your table is large, I would recommend increase your buffer cache.
No temporary tables is used as far as I know. There are no sort files in Oracle. Temporary tablespace may be used because sorting is generally needed when creating an index, but I am not sure about that.
When creating a index, Oracle creates a temporary segment in your permanent tablespace: if the CREATE INDEX fails, the temporary segment is removed. If the CREATE INDEX succeeds, the temporary segment is made permanent.
Message was edited by:
Pierre Forstmann

What PDF settings are used when creating DPS articles?

When you create a PDF file using Acrobat Distiller or InDesign you can modify settings such as font subsets, image down-sampling and compression which will have an impact on the final file size. Does anyone know what settings are used when articles are rendered in PDF format in DPS and can the settings be modified? Specifically, what type of compression is applied to images? If I were to place two images on a page, a png and a jpg with medium quality, would they be embedded in the PDF as is or re-compressed in another format and/or level of quality?

Thanks for your help.
So images placed in an InDesign retain their original file format and are unzipped when the article is loaded in the app.
I'm assuming that if compression is applied to the original image files it can have an impact on performance. If you were to use jpeg files in a document they would need to be unzipped and decompressed. I've read other forum posts that suggest the iOS jpeg decompression engine is too slow to present a fluid user experience in a DPS app. The combined processing time of unzipping and decompressing jpegs files may steer me towards the png format.

What port numbers are used when creating temporary queues

Using the following code as an example, what port(s) are used when creating temporary queues? Is it a range of ports? Is it random? And is it configurable? If you have any insight on this, please let me know. Thanks.
QueueConnection con = connectionFactory.createQueueConnection();
QueueSession session = con.createQueueSession(true, Session.AUTO_ACKNOWLEDGE);
TemporaryQueue replyQueue = session.createTemporaryQueue();

The only ports I know about are the defaults ports:
JMS 7676
IIOP 3700
Are these the only ports that are used, even for temporary queues?

What is the use of creating proxy services using WSDL.

Hi
Am a beginner in ALSB and i have a basic question. Business services are created using WSDL,thats sounds logical as we need to invoke the actual backend services .
Proxy services are connected to business services and what is the need that it can be e created using WSDL.
What is the use of creating proxy services using WSDL.

Hi,
I beleive you are confused because of the apparent inclusion of transport information in WSDL (that is the host:port/endpoint where the service is hosted). However, if you refer to the w3c specification of WSDL1.0 ([url http://www.w3.org/TR/wsdl]www.w3.org/TR/wsdl), you will find that WSDL has three separate sections:
1. The schema information that describes data element(s): specified in types
2. The message information ie message and port sections that specify the parameters and the operations
3. The service section that specify the actual protocol and endpoint binding.
Ideally, a WSDL can be broken down into these three separate components. Any WSDL containing the first two is called an abstract WSDL and is used for a top-down approcah for web services, and if the third part is used, then you get a concrete WSDL, containing invocation end-point also.
Comming back to your question one can typically use an Abstract WSDL for creating proxy service. This way, the service requester and integration can go on two separate threads where the common denominator or agreement between these two parties in terms of operation name and data element are imposed using the WSDL.
Thanks and Regards
Vivek Nandey
BEA Certified Developer for Integration Solutions

What is the use for CREATING VIEW WITH CHECK OPTION?

Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
Karthik

Hi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables.

What can I use to create a photo banner/collage that is free formed. I'll need background colors and ability to place 5 or more pics in a horizontal row? Does adobe have a product i can use to create this?

what can I use to create a photo banner/collage that is free formed. I'll need background colors and ability to place 5 or more pics in a horizontal row? Does adobe have a product i can use to create this? I'm not looking for templates when creating.
thanks
tracy

You can select 5 (or more images) and place them by dragging in Adobe InDesign. After creating document go to File > Place, navigate to images and select them. In InDesign start dragging and press right arrow key couple of times then release mouse button. You can export file as PDF, JPG, PNG image from File > Export.

What reports are used to send PO, Conf and Inv from MM to SUS?

Hi dudes
What reports are used to send PO, Conf and Inv from MM to SUS?
Regards
Raj Kumar

Hi Raj kumar,
First implemting MM-SUS or EBP-SUS XI is mandatory. For sending a PO, it 's standard process. You have to define partner profile and once you create a PO system geneartes an IDOC with orders02 and send to XI from there goes to SUS.
For confirmation you have to run the report rpoddelvery report . this reports sends all the GR's to SUS.
Please follow the config doc and follow below links
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/2a/38fd37dcc4e34ce10000009b38f842/content.htm
Please let me know if any problem
Thnaks
Ravi

Best computer to use to create an image

We use netboot as a diagnostic tool. Traditionally when a new model computer comes out, it wont netboot, so I would recreate the image using the computer. This has worked fine until the intels which dont seem as backwards compatible as the PPCs were. Currently the netboot image we use was made off an imac ( I use system image utility to make the image) and it works fine to boot everything but the 1.83GHz Core2Duo Macbooks. They freeze after a couple of minutes. MacPros with 2 video cards also fail to netboot.
So my question is- what is the best computer to use to create an image that is compatible with all prior computers?

You need separate images for intel and PPC Macs.

What settings are used to convert to pdf?

what settings are used to convert to pdf?

Hi geoffc39307434,
Are you asking what settings Adobe PDF Pack uses when you create a PDF file, or what settings you should choose in Acrobat when you create a PDF?
Best,
Sara

What Universe was used to create a report?

Is there any way to tell what Universe was used to create a specific report, Also is there anyway to tell what Universe connection a specific Universe is using?
Thanks
jeff

Hey Ted,
Thanks but I got an error when I tried to do this. Here is the query that I used. Any thoughts?
Select * from CI_APPOBJECTS WHere SI_KIND='Universe' And SI_CUID='<ASBJCyAKjL1FhG1pNAMsor4>'.
and here is the error
A potentially dangerous Request.Form value was detected from the client (sqlStmt="... SI_CUID='<ASBJCyAKjL1FhG1pNAM...").
Description: Request Validation has detected a potentially dangerous client input value, and processing of the request has been aborted. This value may indicate an attempt to compromise the security of your application, such as a cross-site scripting attack. You can disable request validation by setting validateRequest=false in the Page directive or in the configuration section. However, it is strongly recommended that your application explicitly check all inputs in this case.
Exception Details: System.Web.HttpRequestValidationException: A potentially dangerous Request.Form value was detected from the client (sqlStmt="... SI_CUID='<ASBJCyAKjL1FhG1pNAM...").
Thank you!
jeff

What program was used to create the Firefox intro video? Really good!

I downloaded Firefox for the first time and watched the overview video. It is very engaging - I'd like to know what programs were used to create it. Camtasia, Captivate, Flash for example.
Thank you,
Jennifer

My understanding is the TechNet library is a custom ASP.NET application and doesn't use SharePoint at all.
The response headers reveal the following information:
Server:
Microsoft-IIS/8.0
X-AspNet-Version:
4.0.30319
X-AspNetMvc-Version:
5.1
X-Powered-By:
ASP.NET
X-Powered-By:
ARR/2.5
X-Powered-By:
ASP.NET
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

When dragging photos to desktop, what settings are used?

When a photo is dragged out of iPhoto and dropped anywhere in the Finder, what settings are used for that implicit export? E.g., what JPEG quality? It seems to export the full size.
Can't seem to find this documented anywhere!

In tests Old Toad reckoned that it was equivalent to about 8 on Photoshop's scale of 12.
Typically when I export via the file menu I select the highest quality. If iPhoto uses something less than that, then I'll stop dragging and return to the file menu export.
Doesn't quite work like that.
If you have an edited photo then there is a single generation of compression applied. If you export at any setting other than Maximum the file will be smaller. At maximum the file will quite likely be larger - less compression applied to the data.
As to which is best to use? Depends on what you're using this jpeg for - but remember this, exporting via dragging gets none of the metadata you've added in iPhoto (Keywords, Location, titles, descriptions etc)
Regards
TD

Isn't there an app that can track what apps are using up your resources?

There really ought to be! My battery time stinks, I have to recharge my phone all the time, it's I took it off the charger at 8:15 and it's down to 84% and I barely used my phone today. I've tried every suggestion I found on here and it hasn't helped. The one thing that COULD help is if there was some kind of task manager like in windows that showed you what apps are using which resources so at least I could tell if there's something running that is constantly using up all the resources and milking my battery. This is really frustrating. I just checked and my battery is now at 83% and it's been locked this whole time. I'm sorry but that is not normal.

another symptom--after doing nothing but some light texting, she sent 30 mb of data in an hour. That strikes me as being way out of line.

What do you use to create distributable packages with ARD?

What do you use to create distribution packages for ARD?
I.E. a package for installing the new Oracle Java 7.21 on all our machines.
Or, a package for installing Micosoft Office 14.3.2 udapters?
Specifically for 10.7 and 10.8 users.
Install Ease?
Jamf Composer?
Packages?
xCode PackageMaker?
Which one should I put my time into using?
Thanks.

Nicolas, Have you been able to get the Adobe Update to work? I get stopped at the first step, putting in the command-line to install the AUS2.0. I think we have a support Contract, i should probably just ask Adobe for assistance.
Does noboby create their own distributable packages? Maybe i'm looking at this wrong.
I see that even Microsoft puts their updates into a .pkg file that is pushable through ARD. Maybe most everyone else does?
I was able to get an Adobe Flash Player Distributable installer, from Adobe, you have to fill out a form asking for permission for the distributable installer, and they send you a link to the files.. ugh. but fine. I have the .pkg installer for Flash, and that works pushing out over ARD.
http://www.adobe.com/products/players/flash-player-distribution.html
I guess my life would be great, if i can just get a Updater source for CS5.5 and CS6.
I did create the Adobe Package distribution for actually installing the CS6 over ARD. That works.
I have a licensing glitch on deploying new machine off a build that has CS6 on it. I'm able to get around the licensing glitch by using the Adobe Serialization tool, that's fine.
I guess i'm just looking for a CS6 Updates tool. I'm fine creating a CS6 updater package using InstallEase or something. I'm wondering what the best one is.
IF most everything already comes as a .pkg file nowadays, and it's just Adobe that's difficult. I guess there's not really a need to create .pkg files for anyone? So nobody really uses them?

What techniques are used to create these images?

Similar Messages

Maybe you are looking for