What the hell where are the vocail effec

What heppend to zeus and alien voice that was in older soundblaster software? has creative gone backwards in its awfoul progaming of software?
And why is the x-fi software way worse then 5.

I admit the new cropping style took a little getting used to .... however, I am not ready to see any of the design team run over with a Hummer.
Even though I pre-purchased LRv1 before it's official release, I have not implemented it into my daily workflow yet. I am still testing and learning. I know I will develop a sytem that will save me time and effort if I explore it fully.
There is plenty of work that needs to be done so LR can be brought up to speed for the masses, so it will be a little more compatible with divrese individual workflow needs.
Of the 1400+ post on this forum, I wonder how much complaining there would have been the first few weeks PS1 hit the shelves? PSCS3 is a massive change from the first introduction. I am convinced that it won't take 17 years for LR to explode into the "dream machine" that the devlopers had invisioned it could be.
We're going through some growing pains ... patience will pay dividends.
Careful thought is needed in evaluating any new software, as in purchasing a car, cumputers etc. Some things fit, others don't. Comfort level is important. Belittling the designers instead of requesting a reasonable design change doesn't help.
Just my thoughts ... flame at will.
Butch

Similar Messages

  • What bios and where are they

      i have a K8T NeoFIS2R mother board and updated the bios by live update
    now its set the mem timing to cl 2 they wont run stable at 2 i reset in bios to 2.5 and when pc boots it still says 2 but in bios it says 2.5
    ive read in the forum using live update can give problems with 64bit cpu
    ive typed in K8tNeofis2r in msi site and it brings up my board but when i go to bios i can see red typing saying
    "1.x~2.x BIOS cannot be used on K8T Neo-F (PCB2.0)," this is on all the bios i can see on the site for this board so where can i get bios that are good
    i have
    K8tneofis2r with amd 3200 cpu running xp pro. if i can set mem to cl 2.5 pc runs solid but at cl 2 it wont
    can anyone let me know where i can get bios when i now use live update it says i have latest ver
    i have even used rescue disk to restore old bios but it still wont let me reset to cl2.5 as it use to be 
      i am about to try ver 1.9 if this dont work 
      i think ill put these 2 fingers in the plug socket to get a fresh charge of ideas

      incase anyone is as mad as me and wants to try this here is what i did
    after i updated my bios to 2.2 and had problems
    i found when updating a file was placed on my pc with bios info in
    C:\Program Files\Setup Files\MS-6702 v2.20
    to downgrade bios to earlier version i just went to this file and removed the A6702VMS.220 file and replaced it with A6702VMS.190
    this is ver 1.9 
    i then started live update and chose bios update then clicked next until it said "files already exist overight Y\N" i chose no it then offerd me to browse what file i wanted to put on bios so i clicked the browse buton and went to C:\Program Files\Setup Files\MS-6702 v2.20 and chose the
    A6702VMS.190 file and clicked next, live update then confirmed v9.1 was to be the update i then chose to burn in windows and sat back until finished
    ALLWAYS KEEP A FLOPY HANDY AND BACKUP YOUR BIOS WHEN OFFERD 

  • I have thousands of songs dowloaded from my cds and purchased from itunes that will not play.  It states the file cannot be found.  What happened to them and where are they?

    I have thousands of songs dowloaded from my cds and purchased from itunes that will not play.  It says file cannot be found.  What happened and where are they?

    When songs cannot be found, it's either because they have been moved from the original location that you told iTunes, renamed or deleted.
    So have you:
    renamed songs?
    moved them to a different loaction on your computer since you imported them into itunes?
    deleted them since you imported them?
    stored you iTunes library on an external drive? If so, that drive needs to be on and ready every time before you start iTunes.
    ... or is another programme renaming or even moving them, such as Windows Media Player? (It has been known to if you let it.) Did you previously use Windows Media Player?

  • I updated to Mountain Lion and Mail has lost all my RSS feeds. Where are they?

    I updated to Mountain Lion and now Mail has lost all my RSS feeds. What happened and where are they?

    -------- "Your RSS data is not lost. You can find it in ~/Library/Mail/V2/RSS folder."
    it's just as good as lost, if there is no way to load the info in that folder into a new reader.
    i followed that path, ~/Library/Mail/V2/RSS, and I have almost 40 rss feeds. that means
    there are nearly 40 folders that I would have to go into, one by one, and extract the pertinent
    information, and import, one by one, into a new reader.
    this is a problem that Apple created. I would have never used the mail.app as a reader
    if I knew Apple was going to do this to us. And it makes you wonder what else Apple is
    going to do to screw us loyal customers over. (why would they discontinue a feature, knowing
    that it would mean lost data and a headache to their customers?)
    does anyone have an automated solution to importing these files into a new reader?

  • How do I find out what the charges on my credit card are for? Where is the iTunes account to log into and check?

    How do I find out what the charges are on my credit card are for. Where is the iTunes account to sign in and check?

    Launch iTunes then select iTunes Store from the source list left side of the window.
    Click Sign In on the right side of the window just above Quick Links.
    Now click your account name.
    In the next window click See All to the right of Purchase History.

  • What is virtual file system in sharepoint, where are the site pages stored?

    I came across this paragraph in Inside Microsoft SharePoint 2010; page 126 :-
    When SharePoint Foundation provisions the Proposals document library,it creates a folder named Proposals at the root of the site and then it creates a child folder named Forms.
    Inside the Forms folder, it creates a set of site pages with names such as DispForm.aspx, EditForm.aspx, AllItems.aspx, and Upload.aspx. The reason that SharePoint Foundation creates site pages inside the Forms folder for each
    new list and document library is that these site pages will provide users with the forms they will use to add and manage content.
    My question is that:-
    1) What us the root of the site means? 
    2) Are the pages for edit/add/allitems created in filesystem OR in the content database?
    3)Suppose we create new sitepages, then where are they stored? In filesystem or in content db?

    Hi,
    For All above queries the data and site pages are stored in content database
    Root folder: A folder created for the document library under the web (sub site) and another folder created as child folder named Forms. Site pages are created in SharePoint content database
    SitePages(Add/display/edit): These pages are created in SharePoint content database
    Note: The SharePoint will not create any physical aspx page OR folder in the file system while creating document library.
    Hope this will help you.
    Senthilrajan Kaliyaperumal
    But the book mentions that:-
    When SharePoint Foundation provisions the Proposals document library,it
    creates a folder named Proposals at the root of the site and then it creates a child folder named Forms. 
    Is
    this wrong? Are the folders created in filesystem or content db? If the files are not supposed to go into the filesystem, then why are the folders created?

  • I just purchased and downloaded Logic 9. I had Logic 8 previously installed. What the **** happened to my Logic 8. It's gone along with the sounds and my my G4 mastering Folder. And... where are all these sounds stored on my computer I can't find them?...

    I just purchased and downloaded Logic 9. I had Logic 8 previously installed. What the **** happened to my Logic 8. It's gone along with the sounds and my my G4 mastering Folder. And... where are all these sounds stored on my computer I can't find them?...

    Very many thanks Niel. My problem solved in less than five minutes. I've never had to use that command before. I found the folder and copied it - but I'm still no clearer as to where it was!
    Thanks again

  • I have an iMac, where are the completed print jobs stored on the iMac and what format are they?

    I have an iMac,  where are the completed print jobs stored on the iMac and what format are they?
    My OSX is 10.10.1

    Hi
    If you are using standard system or HP drivers, than the jobs contents are not saved at all.
    You can see the list of completed jobs per printer via this URL: http://127.0.0.1:631/printers/
    If you want to save a print job, you can do it in the print dialog, by selecting an action prom "PDF" popup.
    It allows to save a job (prior or instead to printing it) as PDF or PostScript.

  • Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

    Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

    When you enable photo stream on your Mac, in imports photos currently in your photo stream.  However, photo stream only keeps photos for 30 days, even though up to 1000 photos will remain on your device until you delete them.  When you enable photo stream on your Mac, you will only receive photos added in the last 30 days, as the others are no longer in your photo stream.
    If you want to get all your old photos on your Mac, save them to your camera roll (if they aren't already there) by opening your photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll.  Once they are in your camera roll, import them to your Mac as explained here: http://support.apple.com/kb/HT4083.
    Another option would be to create a shared photo stream containing the older photos and invite yourself (as explained here: http://help.apple.com/icloud/#mmc0cd7e99).  Then check Shared Photo Streams in iPhoto>Preferences>Photo Stream and you will see this shared photo stream on your Mac.

  • Where are the fonts!? What the...

    Hi everyone,
    I've just received my shipment of Adobe CS4 Design Premium for Windows and immediately installed it on my new laptop. The school I attend works a lot with typefaces like Optima, Frutiger, Helvetica etc.
    Here's my problem. Where are these fonts? I was told that they're standard on a Mac, but that Adobe CS4 introduces these specific fonts to Windows. Instead, I have the lame *** assortment of boring and frankly rather useless Windows fonts. I paid a lot of money for this product and I am already irritated because I need these fonts - and they're not here. Or are they? Nowhere on the web was this denied. I got the assurance that these fonts are included. Sounds like BS now...
    If anyone can help me out, this would be great. And what would really be awesome is if someone can perhaps send me these fonts (for Windows) via email. Basically all the fonts that are standard on a MAC (Optima, Helvetica etc.) and were supposed to be included here.
    That would really be great. [email protected]
    Thanks.
    PS: The reason I won't switch over to a Mac is because all my programs are for Windows. Switching over to a Mac will be too costly and I can essentially do the same work on a Windows computer nowadays as a Mac.

    If you buy fonts from Adobe, the standard license allows use on up to 20 computers (you can buy site licensing if you need more) and from the license:
    14.7. Font Software. If the Software includes font software --
    14.7.1 You may use the font software with the Software on Computers as described in Section 2 and output
    the font software to any output device(s) connected to such Computer(s).
    14.7.2 If the Permitted Number of Computers is twenty, you may download the font software to the
    memory (hard disk or RAM) of two output devices connected to at least one of such Computers for the
    purpose of having the font software remain resident in such output device, and of two additional such
    output devices for every multiple of twenty represented by the Permitted Number of Computers.
    14.7.3 You may take a copy of the font(s) you have used for a particular file to a commercial printer or
    other service bureau, and such service bureau may use the font(s) to process your file, provided such
    service bureau has a valid license to use that particular font software.
    14.7.4 You may convert and install the font software into another format for use in other environments,
    subject to the following conditions: A computer on which the converted font software is used or installed
    will be considered as one of your Permitted Number of Computers. Use of the font software you have
    converted will be pursuant to all the terms and conditions of this agreement. Such converted font software
    may be used only for your own customary internal business or personal use and may not be distributed or
    transferred for any purpose, except in accordance with Section 4.4 of this agreement.
    14.7.5 You may embed copies of the font software into your electronic documents for the purpose of
    printing and viewing the document. If the font software you are embedding is identified as "licensed for
    editable embedding" on Adobe’s website at
    http://www.adobe.com/type/browser/legal/embeddingeula.html, you may also embed copies of that font
    software for the additional purpose of editing your electronic documents. No other embedding rights are
    implied or permitted under this license.
    This is actually pretty generous. The standard license from Linotype limits you to 5 workstations, but allows you to transfer the font for output at the printer provided thay don't need to do any editing, in which case they need their own license. Embedding in PDF is also permitted. Modification of the font (including conversion), on the other hand, is completely prohibited. Other foundries and distributors will have their own licensing restictions/requirements, and your license for the same font might vary depending upon where you purchase it. Some licenses prohibit commercial use (this is true of most so-called "free" fonts) unless you upgrade to a more expensive commercial license, making them utterly useless to a professional designer. In short, you need to read the agreement to find out what is and isn't allowed.
    Peter

  • What is the main use of pooled talbe and where are they use?

    Hi gus:
             Can somebody tell me what is the main use of pooled table and where are they use,thanks!
            Regards
             Jerry
    Moderator message - Please search before asking - post locked
    Edited by: Rob Burbank on Sep 1, 2009 9:11 AM

    Hi,
    Table pools are special table types in the ABAP Dictionary. The data from several different tables can be stored together in a table pool or table cluster. Tables assigned to a table pool or table cluster are referred to as pooled tables or cluster tables.
    This table are similar to the CLUSTER table types but these work on "LINEAR SEARCH" while CLUSTER TABLE uses "BINARY SEARCH to retrieve the data from the various tables and thsi is mainly used in the logical databases "LDB's" used in HR or ABAP-HR.
    A table in the database in which all records from the pooled tables assigned to the table pool are stored corresponds to a table pool.
    The definition of a pool consists essentially of two key fields (Tabname and Varkey) and a long argument field (Vardata).
    Table Clusters Several logical data records from different cluster tables can be stored together in one physical 
    record in a table cluster.
    A cluster key consists of a series of freely definable key fields and a field (Pageno) for distinguishing continuation records. A cluster also contains a long field (Vardata) that contains the contents of the data fields of the cluster tables for this key. If the data does not fit into the long field, continuation records are created. Control information on the structure of the data string is still written at the beginning of the Vardata field.
    Regards,
    Samad.

  • Where are my photos located if I use LR CC.  What is stored in the Cloud?

    Where are my photos located if I use LR CC.  What is stored in the Cloud?

    With the desktop version of Lightroom CC, nothing is stored in the cloud, nothing can be accessed directly by Lightroom in the cloud, and the Lightroom CC program is installed locally on your computer. The creative cloud is used as a delivery system to provide you with updates and to validate that you are keeping your creative cloud account current. If you decide to do so, you can create collections of your images and share them in the cloud. And if you have a supported mobile device you can install Lightroom Mobile on that device and work on those images that have been shared in the cloud. But basic operation of Lightroom CC is no different than it has ever been.

  • Just downloaded FF 4 beta 1 and... what the hell am I looking at? What are all these multi-colored buttons all over the top of my screen?

    What is this? I just downloaded FF 4 beta 1, and I make figure out what all of this at the top of my screen is for. I wish I could send you a screen shot! The actual window is cut in half...what the hell?
    == This happened ==
    Every time Firefox opened
    == As soon as it was downloaded and installed

    That's Page Saver, and it's great for taking a snap shot of a webpage. It doesn't capture any of the browser tool bars and such, though, and that's where my problem is. I've got a great splat of toolbar and many many many colored buttons and other random things eating up the top four or more inches of the screen when I open FF4b1, and I can't get rid of it. A screen capture shows the problem well, but something made with Page Saver only shows the web content and none of the browser.
    This is turning out to be far more trouble than it's worth.

  • N8-00 What the hell are you all complaining ...

    I got my phone for 12 days now and is a very happy customer.
    Most of my mates have Htc Desire or Samsung Galaxy or i-phone. Not one of them have a truly perfect phone to do everything. In fact everyone has some gripes and frozen application at one time or another. None of them are using a true multi tasking processor like the current intel chips or amds in current pcs.
    So I accept my phone with the current limitations of mobile phone technology.
    Indeed I am perhaps lucky?
    My phone have not crash since I reinstall using the ovi sync software. Everyone compliments on how good the phone connection is! The web surfing is so easy and attentive to asking which server it should be connected when I am at other unfamiliar places.
    Sure, my N8-00 is never going to impress the kids with imaginative and eye catching animations available only from the i-phone but what the N8-00 does for practicality is truly great. Next time for those with barrages of complaints (real or fakes quite likely from competitors I believe), try competing brand phones in real life situations and places, not just at the shop!  The Nokia is genuinely a very dependable smartphone.
    The only other person I know who also has a Nokia N8-00 is so contended with his phone after getting used to it. Cheers Nokia! 
    Sydney, NSW

    I'm am genuinely really glad to hear that there are in fact happy N8 owners. 
    When my currently dead N8 gets replaced I hope to join you in your words of praise! Until then all I have to go on is my experiences so far & they ain't good. I don't work for any other phone manufacturer & up until now have had no interest in owning either a HTC or iPhone, let s see how i get on with the new unit once it comes off of backorder. If it's good I'll sing it's praises also, if it's bad i'm off else where.
    Hope your experiences continue to be good ones.

  • What dll do I use and where are the .h include files?

    I recently downloaded the wavetek 271 drivers and have found that when imported (Lab View 6.0) that they need to be linked to a dll. But which one? And the includes call for the glib.h and other libraries where are they at. Are they compressed?
    thanks

    Hello-
    There are two versions of this driver one for LabVIEW (NI's graphical language) and one for LabWindows-CVI (NI's text-based language). Be sure to download the proper type of driver.
    In LabVIEW, the driver should be placed in LabVIEW\instr.lib.
    In LabWindows-CVI, it's necessary to Load the driver from the Instrument>>Load... menu. The files should be placed in cvi\instr.
    Randy Solomonson
    Applications Engineer
    National Instruments

Maybe you are looking for