What to make the finished product?

Hello
I am shooting in HD and need to submit some of my films as previews on websites. When all the edit is finished, what would be the best file type to use for web viewing. I want to keep the quality of the video as high as possible without making the file too large - it doesnt matter if the video takes a few minutes to load. . .
So, any ideas?
Thanks

Hi(Bonjour)!
This forum is full of topics about compression and delivery format.
There are many ways and paths to follow. It's always a good idea to test by yourself what does fit your specific needs.
One simple workaround is to use export with quicktime conversion for iPod...
You'll get a relatively small and not so bad quality in H.264 format. Just change the extension for ".mov" instead of M4V. Beware of frame size, there is a difference between iTune 7 and 6, to accomodate the video for 5th generation iPod rev. october 2006, see
http://discussions.apple.com/thread.jspa?messageID=3148749&#3148749.
Look at Ken Stone FCP web site: it's a rich informations source, like:
http://www.kenstone.net/fcphomepage/video_to_ipodstone.html
http://www.kenstone.net/fcphomepage/qt_movies_fromfcp.html

Similar Messages

Stocking Level- Two levels below the finished product

Hi all,
I want to maintain stock two levels below the finished product in MTO environment...How can i acheive this in SAP...Also i want to maintain forecast one level below the finished product..Please give ur expert opinion in order to achieve this requirement..
Actually scenario is Packed liquid is my finished material and forecast is given at liquid level and both these levels are not produced until a sales order arrives...i am taking liquid as SFG, please suggest otherwise if i m not moving in right direction.
Thx
Shah

Hi,
Kindly follow the steps mentioned below, I hope it addresses your query.
Warm regards,
Umesh
Process Scenario & the BOM structure
Level 1: ZURP_PKG_LIQUID <Sales order received here>
Level 2: ZURP_LIQUID < Forecast done here to plan lower level materials, this material is planned on the receipt of sale order at higher level>
Level 3: ZURP_RM_LIQUID < Procured/Produced and kept in inventory>
Step no 1: OMP0  use Requirement class u2018103u2019 or create a copy u2018Z70u2019
Step no 2: OMP1  create a new requirement type u2018Z70u2019 and assign the Requirement class u2018103u2019 to it.
Step no 3: SPRO  define a new strategy u20187Tu2019 and assign requirement type u2018Z70u2019
Step 4: SPRO  create strategy group u20187Tu2019 & assign the strategy u20187Tu2019
Step 5: MM02 u2013 MRP3 view  Assign this strategy to material code ZURP_LIQUID at which forecast is done
In MRP4 view leave the individual/collective indicator blank
For Material ZURP_PKG_LIQUID  maintain strategy group as u201820u2019
For Material ZURP_RM_LIQUID  maintain strategy group as u201810u2019 & individual/collective indicator as u20182u2019
Step 6: MD61  Create Planned independent requirement for ZURP_LIQUID
Step 7: MD02  Execute MRP for ZURP_LIQUID
Note: Planned orders for ZURP_LIQUID are created, but they cannot be converted into Production order, but this triggers requirement down the line triggering procurement/production for material ZURP_RM_LIQUID
Step 8: VA01  Create a sales order for ZURP_PKG_LIQUID
MD02  Execute MRP for ZURP_PKG_LIQUID
Note: The MRP run triggers the procurement proposal for ZURP_LIQUID, which can be converted to production order & simultaneously reduces the created PIR

What can make the iPod 4G battery damage?

What can make the iPod 4G battery damage?

Leaving it plugged in all the time can damage it, it needs to be cycled every now anda again. It keeps its internal resistanc from building up too much.
Obviously, dropping it, getting it wet, lighting it on fire ect will also damage it.

What can make the battery damage?

What can make the battery damage?

Heat, sun, not use the iPod for a long time.
If you don't go to use it for more than 1 month, recharge up to 50%

Average Costs of the Finished Products

Hi,
We are using the process order concept and we are calculating the costs of each FG seperately and our finished products are different kind of sizes and types.
And the requirement here is that if we want to calculate the average cost of the two FG how we can do this ?
For Example
Product 1 is manufactured and the arrived cost is $ 30
Porduct 2 is manufactured and the arrived cost is $ 10
And if we use the ratios of 60 and 40 and we determine the avergae cost of (3060%+1040%)/100= $ 22
And we adjust this $ 22 with Product cost of A and Product B.

What is FG?

How to make the 'Finish Date' field Editable in Project server 2013

Hi All,
In Project server 2013 on premises deployment, When I try to create a new enterprise project [Also in case of new custom project type], Only the 'Start Date' field is available. The 'Finish Date' field is by default taking the value of the 'start Date' itself.
I am unable to make this 'Finish Date' field editable.
Any pointers on this would be very helpful,
Thanks
Shanky

Shanky --
When you create a new project in either Microsoft Project Professional or Project Online, the system does not allow you to enter both a Start date and a Finish date for the project. Here is how the software works:
You enter the Start date of the project.
You completely plan the project with tasks, task dependencies, task Durations, and assigning resources to tasks.
Based on the Start date you provide, plus all of the task information, the software calculates the Finish date of the project for you. So, you cannot provide both the Start date and the Finish date, nor is they any way to force the system to allow
you to do this. Hope this helps.
Dale A. Howard [MVP]

Creative makes the worst Products E

I've owned my Audigy 4 Pro for some time now and I gave up trying to get the remote working at all about a week after I first installed the A4P. I've decided to revisit this because I'd really like to get it working.
I noticed I did a custom install when originally installing the Creative Software and I did not install the Creative Entertainment Center. So, I got out the CD and installed it. Still the remote did not function at all. I even downloaded and installed the latest Entertainment Center. The default was not set to RM-500 so I switched it in the new Entertainment Center Remote Control tab. Still, the break-out box is not receiving a signal from the remote. Any time I press a remote button, there are not lights that light up or anything.
What could I possibly be doing wrong? I know the battery is installed correctly and everything is hooked up properly between the break-out box and the sound card. Perhaps it's either a faulty remote or faulty receiver in the break-out box?
I'm running Windows XP Pro.
This should be working
!!! I paid way to much money on this card for ther remote to not work!
Moderator note: Changed offensi've subject header.Message Edited by Jason-CL on 08-5-2005 03:34 PM

Is the battery installed properly. AND IS IT A GOOD BATTERY.
<Yes, the battery is installed correctly. I don't know if it's a good battery. If it isn't, it should be. It was brand new out of the box.
The remotes use 3v lithium batteries. There are two ways to check if they're good. Use a voltimeter, or, lick your lips and put them on the top and bottom of the battery (-/+). If you taste wierd metalness, it's good. If the battery is good, make sure it's in properly.
<FONT color=#ff3300>I don't have a voltimeter, so I tried the licking the lips thing. I didn't taste anything like metal or any tingling or anything like that. Perhaps, even though it's new, it's a bad battery?!
There's a credit card sized IR tester available in some radioshacks. Ask the clerks if you can point your remote at it. A working remote makes the card turn red.
Point ANY IR remote at the shaded IR reciever. If the LED above it blinks RED rapidly, the remote is faulty. Send it back, get a creative RMA.
If the remote is working properly, and no remote makes the red led blink, the breakout box is faulty.
<I pointed a different IR remote at the Creative Breakout box and did not get any blinking lights. Does this mean the break-out box is faulty?
<
<Thanks for your help!

HT5067 When using a Keynote Widget with iBooks Author, do the transitions and builds between Keynote slides appear in the iPad preview version of the iBook, or only in the finished product?

I'm using the Keynote Widget in iBooks Author, and the Keynote presentation uses the Magic move transition between slides. When I preview the iBook on a new iPad, the Magic move transitions don't show up (i.e. the transition from slide to slide is standard, not Magic move). Any suggestions?

Hyperlinks and magic move should work but don't. However I found the following as a workaround for me. Use three slides instead of two to generate the magic move effect in Keynote presentations on Ibooks using hyperlinks only. As an example
Supose an object on slide 1 was set as a hyperlink to go to a slide which then had a magic move effect to a third slide. For some reason it works on the mac, but not on ibooks. However you can create the magic move transition effect by simply adding a "dummy slide" as follows. Suppose an object on slide 1 had an object which would hyperlink to slide 4. Duplicate Slide 4, and make the duplicate slide 5. Then set Slide 4 to automatically transition (with no effect) to the next slide (i.e. slide 5) after .5 seconds. Have Slide 5 set to transition to Slide 6 using magic move automatically after .5 seconds. By having the hyperlink point to slide 4 the magic move effect from Slide 5 to Slide 6 works fine (with a brief 1 sec delay). IF the hyperlink pointed directly to Slide 5, the magic move transition to slide 6 would not work.
For some reason having an extra slide makes magic move work even though it is not needed on the mac. I hpe this helps.

How to make the new products on SLD to show on the PI?

We have a PI7.0 connected to a remote centralized SLD.
Whenever there is a new product on the SLD , we want to have it show up at the PI7.0.
We do not know how to make it happen.
What we know is (perhaps) once a new product is installed on the PI, SE70 will inform SLD about this.
Please help. Thanks!

Hi Ashley,
As you are mentioning that SLD has been connected to PI7.0 No special mechanism is requred to access products .Every thing that is created in SLD will be in synchronised automaticaly and you will be able to see them in IR(ex.Import ing sofware compnent from SLd).
Thanks,
Ram.

What program makes the DVD Studio Pro 4 Templates? Motion?

I was wondering what software the designers used to make some of the beautiful templates. Please let me know of some suggestions, or on how to make motion menu screens. Does everyone use motion here?

Hey George, sure thing
(by the way, if you don't mind, giving a helpful rating to a
response gives my forum profile a boost, if you take a moment
to mark a response as helpful or solved...)
anyhoo, here's two approached for doing your own
take on a Template you like (One Long, one short)
1) Take a screenshot of the DVDSP Template you like using
the free Mac OSX Utility app "Grab" or an app like Snapz ProX
2) In Photoshop or a program like it, do a mockup of
that Template throwing in your own design ideas,
using layers help.
3) Create a separate layer in the Photoshop doc that
simply creates shapes (best if they're square/rectangular)
that act as the size/placeholders of the buttons
4) Do into DVDSP and simply create a New Menu,
choose Overlay and bring this Photoshop mockup as
a background, bringing in all Layers (not flattening it) including the Normal state of the buttons and the separate layer with the shapes
(Normal = the buttons the DVD user 1st sees when they go
to the Menu and before they make a selection)
5) Then simply assign the Overlay to your Photoshop layer
that has the shapes (note: these are different than the
normal states of the buttons as they actually tell DVDSP
to treat the overlay (aka functionality) to these shapes
voila, you have your own custom-made menu
A shorter approach would be to apply a Template in DVDSP
and start re-arranging certain elements, although there's
not as much control if you were to start from scratch
with your own Photoshop
keep in mind, there is also the option to do
a Layered Menu as opposed to an Overlay Menu,
which is cool in that it acts more like a website menu
(e.g. you hit a hyperlink that automatically updates
a line of text or image on the very same page) but
Layered Menus react slower for the DVD user and cannot
have Audio or Video in them
hope that gives you a running start
cheers

Prod. Order Confirmation does not make my finished product (Staging)

Gurus,
I got my components from Warehouse to Storage Type 100 (default) using Staging. Now I confirmed my Production Order. So the Storage Type 100 should show my final product and 0 stock of components right?
It still shows all the components in Storage Type 100 and no FINAL Product.
Look forward to your replies
Regards,
Vikas

Hi
The storage location is correct there.
Can you please verify if I am conceptually on the right track.
1. First I checked the quantity in Storage Type 100, there was some component stock here. (lx03)
2. Then I confirmed Prod. Order
3. Now I do lx03 for Storage Type 100 again. It still shows the same component stock and no final material there. Whereas it should show reduced or 0 quantity of component stock and some quantity of final material.
Is there another step between 2 & 3 above??
Regards,
Vikas

What happens to the UC320 Product Line with Announcement of Linksys Sale?

Does it stay with CISCO proper or does product strategy keep it more aligned with Linksys?
http://arstechnica.com/information-technology/2012/12/cisco-to-sell-off-linksys-division/

Hi Dean;
I cannot speak on the announcement as there is no official communications from Cisco, and basically because I don't know.
I can however comment that UC300 product line is entirely independent from Linksys. This has been the case since 2008.
Regards;
Alberto

I burned a slideshow with iDVD, professional quality selected, 16:9 aspect ratio selected. The quality of the finished product is much below that seen on my computer. I have watched slideshows made by other imac users which look great.

I have burned a slideshow from an iphoto album through iDVD, with "pro quality and 16:9 aspect ratio" selected on a double layer dvd. When viewed, the picture quality is much inferior to that of the photos on my computer. I have viewed slideshows made others with mac software and the pictures are much better. My tv is HD 1080 wide screen and disc player is new. What am I missing?

That's more an iDVD problem and you should ask your question there: iDVD.
The resident expert there, Bengt Wärleby, will be able to give you suggestions on how to proceed. He's very, very good.
OT

What will make the picture from FCP studdering from the HDMI output, but not from the firewire output ?

I have a Mac Mini 2010, 8G ram,running on Snow Leopard. I'm playing some video clips from FinalCut Pro 7.0.3. When I'm using the HDMI output,the picture will be studdering on a horizontal panning picture. This problem does not happen when I'm using the firewirw output, which I can't use anymore with my new playback system..
Is there any setup I can use to fix this studdering?

Sorry about that, have had no need for pasting output so far as I was using Ubuntu/Mint/Sabayon so could work most things out myself. Thanks for letting me know Also, please mark this post SOLVED as well as STUPID lol. I removed Pulseaudio and went over my Alsamixer settings with a LOT more careful attention, discovered that something vital was not unmuted. Doh!! Have to say, Arch is the best learning experience ever, though

Previewed book on iPad2 appears smaller on my bookshelf beside the others that I actually purchased. Is this anomaly corrected when a book is actually published, or is there a way of sizing the finished product while building it in iBooks Author?

Previewed book on iPad2 appears smaller on my Bookshelf beside the others that I actually purchased. Is this anomaly corrected when a book is actually published, or is there a way of normalizing the book's final dimensions for the Bookshelf while building it in iBooks Author?

When you submit to the store via iTunes Producer, you'll have a chance to choose a cover.

What to make the finished product?

Similar Messages

Maybe you are looking for