What trigger to use when wanting to form commit information

Want to commit information from form to database.
Only appears I can use when button push
The on validate record does not facilitate form commit
In previous forms versions used a post update trigger
however this one is not valid/recommended anymore.
THX IN ADVANCE

Thank you Sanjay for your response. I am currently using When Validate Trigger. It works for all the scenarios except when order line is cancelled.
When line cancelled I should rewrite the order quantity to 0 and save then only DFF's are updating to 0's.
Thanks,

Similar Messages

What will you use when forms is gone?

Looks like forms is coming to end in a few years.
If you company is like mine and uses forms a lot (our ERP is all forms), you should be already think alternatives to it.
The big problem is that rewrite all the code is very, very expensive.
So I ask. Have you think about it?
Did you know what you going to do?
I was thinking about ADF and APEX. Wich one will be, for say, the "Forms Replacement"?
Does Oracle has a plan for customers like us?
In short, what is your opinion on this?

As Thomas mentioned, everything must come to an end eventually. However for Oracle Forms, my expectation is that it will remain supported for many more years. And I plan to be on the top of the list of cheerleaders to encourage Oracle to keep it going and improving it. I encourage anyone wanting to see this or any product continue on, to make your feedback known. It is often customer feedback that helps a company determine what direction they will go next with a particular product.
Making statements like "it's going away" or "it is dead" does nothing more than create unnecessary panic. This is especially true when you are just speculating. Or are you? What would make you say
"Looks like forms is coming to end in a few years"How do you know this? Did someone in Oracle tell you this - who? It cannot be denied that the product has not seen much in the way of significant gui enhancements over the passed few years, but that means nothing relative to its life. With each new release, new features are included and many bugs fixes compared to previous versions are included. Generally, making significant changes to this very mature and mostly stable product are avoided in order to ensure its stability. Decisions to include new features or enhancements are carefully reviewed. If a requested new feature is something that is overwhelmingly desired by the customer community and it will not put the stability of the product at risk, it will be considered. However, the most likely new features to be included would be those which permit Forms to better integrate with other Oracle products or technolgies. For example Oracle recently added OAM support.
So, again... I encourage anyone who may be developing new Forms applications, maintaining existing ones, or completing a long running project with Forms to make yourself known. Help Oracle to understand why you use and want Oracle Forms rather than some other product or technology. Is it cost, ease of use, ability to create applications quickly, your comfort zone, or something else. Talk to your account managers and sales reps and tell them your likes, dislikes, and wish lists.
The views expressed in this posting are my own and do not necessarily reflect the views of Oracle.
.................................................................................................................................

How do I determine what URL to use when launching to display a RH10 .htm page?

Hello,
We are implementing RoboHelp 10 for our online documentation and are sourcing it from Framemaker 11. I am trying to determine exactly what URL information the developers need to build for the launch to the specific IBM System i screen. Is anyone launching RoboHelp from a backend ERP system? If so, how did you determine what level to use when building the URL for that page? Thanks for any assistance you can provide.

It depends on whether you just want to open the help at the default topic or open context sensitive topics.
Both methods are described in Calling Help on my site and there is more good information at http://www.wvanweelden.eu
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

What do I use when Migration Assistant reads "you might not be able to transfer using firewire on this computer"?

When using Migration Assistant to transfer from one Mac to another Mac, as soon as I get to the point where it says to connect the firewire to each computer, it says "You might not be able to transfer using Firewire on this computer". What do I use then?

firetruckjanet wrote:
The G5 is running osx 10.4.11, but so is the G4.
I don't know if it's the Tiger or the Leopard.
10.4.x is Tiger; 10.5.x is Leopard.
I've not used the Tiger version of Migration Assistant (just Leopard and later), and there's not much in the way of Apple tech articles for it anymore.
Since the message says "might not," I don't see any reason not to give it a try. At worst, it will fail and perhaps leave a partially-transferred user account on the G5. If that happens, we can deal with it.
I'd make sure the connections are snug and secure, and try it.
Good luck, and keep us posted.
I don't have any backups of the G4 and I don't have an external drive and I don't know anyone who has one.
If your data is important to you, invest in one . . . soon, and start making regular backups. They're not very expensive (some as cheap as $50, good ones perhaps $100). Disk drives fail, especially after a few years, other things go wrong, and even the most careful users make mistakes now and then.

What accessory to use when connecting to Harman Kardon AVR

Hi,
we use a Harman Kardon AVR 145 for our audio at home. Please can anyone advise me what accessory to use for connecting the iPad? We have the bridge for our iPod, but that is no good of course. Please advise on a cable to use. Thanx!

Sorry, but you'll have to either wait for someone owning that equipment to show up or for someone to take the time and trouble to look it up and see what sort of connection options are provided on it. Or, if you want to perhaps move the process on a bit more quickly, and seeing as how you have it right there, you could always provide that info.

TS1646 what is issue number when updating my credit card information

What is issue number when updating my credit card information

I had the same problem.
I contacted iTunes Support and they were (eventually) able to help.
https://expresslane.apple.com/Symptoms.do

What trigger can fire when execute_query occurs?

I have a form where the new form instance trigger calls execute_query (parameters bring the query
field info). I need the code in some when-radio-changed triggers to execute when execute_query occurs
as well. What is the easiest way to do this? (I do not find when-new-item-instance firing at execute_query).
forms 11.1.1.4
Is the only way to do this to put each when-radio-changed in its own procedure and call each explicitly?
(since you can't call a when-radio-changed trigger by name with execute_trigger (why?)).
Well since I wrote that I did put the triggers in procedures and call them and that does work.
Seems to me in forms6i the when new item instance trigger would've fired. This is definitely a whole
new ballgame it seems.
Edited by: lake on Jun 16, 2011 12:28 PM

write the code in the POST-QUERY trigger for this purpose.

What compression to use when capturing?

Hi, I have DigiVOX A/D. I want to capture some TV programs. But I'm littel confused which compression (codec) to use and how to configure it.
If I select DVD PAL 4000 kb/s in settings, 10 secconds of video is an 5.4 MB mpeg file.
If I select AVI 2000 kb/s in settings, 10 secconds of video is an 159 MB avi file.
And the same size (about 158 MB avi file) is when I select MPEG4 2000 kb/s.
This is somehow strange. Should'n 2000 kb/s produce smaller file than 4000 kb/s?
What settings do you suggest? What codec, what resolution, bitrate and so on? I want it only for later watching so it doesn't have to be superb quality.
And another question is about audio coding. There are only PCM (with different settings) in audio settings. No MP3 or so. Is that OK?

juso, you need to install the full codec pack, you can get from http://www.free-codecs.com/
K-Lite is a good one. Most are decoder (playback) but it also include encoding (record, encode) packs.
Once you have the codec installed on your system, you can choose more than AVI, MP3 etc.
Depends on your CPU, if you have a powerful one, I'd use DivX or XVID or MPEG4 encoding, and mux with MP3.

What adaptor to use when travelling international

what adartor can I use for international if I need to charge my iphone 4S & ipad air

The iPad charger is international; it's rated 100V to 240V.
It's better to use a 10W/12W charger to charge iPhone and iPad. A 5W charger will get very hot when charging iPad.

What cables to use when connecting Airport Extreme and Windows XP?

I have a DSL modem and Airport Extreme. Right now I am getting Internet with the cable plugged into "Ethernet" and is connected to my computer. If I want to connect my Airport Extreme to my computer, where do I plug in everything?
Thank you for your help - I am a complete wireless newbie!

Jgreene19
You don't seem to be making much sense, please can you clarify your network and your computer.
You have a DSL modem with an Ethernet port?
Do you have an Airport Extreme Base Station?
What computer do you want to connect by Airport, your iMac listed in your profile (or as this is an Airport for Windows forum) a Windows PC?
Does this Windows PC have a wireless card or not?

What trigger to use?

Hello,
where can i put this code?
declare
     v_cnt integer;
begin
     select count (*) into v_cnt from salarii where an=to_number(to_char(sysdate,'YYYY')) and luna=to_number(to_char(sysdate,'MM')) and id_angajat=:angajati.id;
     if v_cnt>0 then set_item_property('control.btn_salariu',enabled,property_false);
     end if;
end;i need some when-navigate-.... trigger, so when navigating into records i wanna execute that code, to check that 'if'.
Thanks

i wanna set a button disabled if that v_cnt>0. this when navigating into records (when moving to the next record). so everytime i change the current record, i wanna that code being executed and if v_cnt > 0 then that button should be disabled.
Regards.

What LAF to use when not using BLAF

If I don't want to use the BLAF LAF with OHW, should I use "simple" or "minimal"?

Either will work with OHW. For information on those LAF options contact the UIX team on the JDeveloper forum or refer to UIX documentation.

What compression to use when Exporting HD video from final cut pro PAL setting

Hi there
I'm trying to export my HD video from Final cut Pro so that I can edit it in DVD studio Pro. I initially exported it on H.264 setting however it then gives me the message 'NTSC assets cannot be imported into PAL projects' It was edited with PAL setting so I think it must be the conversion but i'm not sure which option to use.....been really struggling to get the 1 hour footage under 4.5gb without losing too much quality...
Any advice greatly appreciated!
thanks

Just to add two suggestions.
1) Consider putting your four movies on two disks.
2) Bring your movies into Compressor and duplicate the stock DVD setting. In the Encoding pane of the Inspector, select a CBR and dial it back to around 6.2 to 6.5 Mbs. In Preview mark a small section and submit; you'll get 2 elementary streams, with m2v and AC3 extensions. Bring that into DVDSP and evaluate results. Adjust as necessary. (This is to avoid waiting out very long encodes and then having to start again from scratch if you get disappointing results.)
Russ

What settings to use when exporting HD into QuickTime Movie

This help call goes out to any Mac user with Final Cut. I need help!!!
I have a Mac G5 and use Final Cut Pro V. 5.1.4. I Just bought a Canon XH A1 and filmed a few test shoots. Then downloaded to FC Pro. I have been trying to export using QuickTime Conversion. Every setting I have tried comes out more or less square. HELP!!!!
My Settings:
In Easy Setup - HDV - 1080i60 FireWire Basic
Under Sequence the setting is:
Frame Size - HD (1440X1080) (16:9)
Pixel Aspect Ratio - HD 1440X1080
No check mark in Anamorphic 16:9
Field Dominance- Lower
Editing Timebase - 29.97
QuickTime Video Settings:
Compression - Motion JPEG B
Under Export - using QuickTime Conversion - QuickTime Movie - Options - Video Settings:
I tied:
HDV 1080i60 and 50
Motion JPEG A and B
DVCPRO HD 1080i60
All settings come out squarish!!!

Hi Patrick,
Thanks for the info. But I can not get any setting to come out looking widescreen. All settings come out square looking. I have tried every setting I can think of but all the QuickTime exported movies come looking like (i.e.: 800X854) more box than widescreen. I think it must be some setting I do not know about or some combination or possibly the capture setting (easy setup).
Thanks for your help.

What should I do when see Blue - Basic identity information?

when I want see the certain web site ,i see Blue-basic identity information,and can't open it,but it can open in IE!
so help me to see this web site,pleas

That site seems to require IE:
<blockquote>Golestan system does not work properly on your browser.<br />
Please use Microsoft Internet Explorer version 6 or upper.
</blockquote>
Use an extension like IE Tab or IE View to use the IE rendering engine in Firefox.
* IE Tab 2 (FF 3.6+): https://addons.mozilla.org/firefox/addon/92382
* IE Tab Plus (FF 3.6+): https://addons.mozilla.org/firefox/addon/10909/
* IE View: https://addons.mozilla.org/firefox/addon/35
* IE View Lite: https://addons.mozilla.org/firefox/addon/1429
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r42
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

What trigger to use when wanting to form commit information

Similar Messages

Maybe you are looking for