What went wrong after Win 7 updates (X220 i7) ?
Now it takes 60 seconds to boot my X220 I7 after the latest Win7 updates.. Please help I am frustrated what shall I do?
OK, with SSD you've to get the boot time like me. From my point of view (and my expirience too) MS antivir increases the boot time.
As for the folder I've called as Autostat - I'm sorry, I have Windows with GUI not in Enhglish. Look at the Start menu, then find out the Startup folder.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español
Similar Messages
-
After the 2014 update photoshop won't talk to Bridge or Lightroom. What went wrong with the update?
When I try to export images from Lightroom or Bridge to Photoshop now I get a message that Photoshop won't start up when it is already open and running.
Update your graphics driver and/or turn off GPU acceleration in the Performance prefs.
Mylenium -
Something went wrong after an Update.
I Have updated my X7-00 Symbian Belle Refresh. But there is something Bad! Russian language is gone! I can't type anything In russian Becouse The russian language is not on the list of "writing language". I Need this! Can anyone tell me how to get russian language back? (I dont want to flash my phone)
My Product Code Right Now: 059J8D5
Symbian Belle Refresh 111.040.1511
Nokia X7-00
IMEI: 35860904*******THIS will provide the reason 'Why that happened ?' and also the Solution..'What you can do now?'
There is no other way you can install a language pack ... -
I have been using facetime on my iphone5 for a while and after the recent IOS update, I cannot seems to use my facetime any longer. what went wrong?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?
I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
com.oxsemi.driver.OxsemiDeviceType00 Version: 1.28.7
com.rogueamoeba.InstantOn Version: 6.0.2
com.rogueamoeba.InstantOnCore Version: 6.0.2
com.Cycling74.driver.Soundflower Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[not loaded] com.adobe.fpsaud.plist
[not loaded] com.adobe.SwitchBoard.plist
[not loaded] com.bombich.ccc.plist
[not loaded] com.dymo.pnpd.plist
[not loaded] com.intego.BackupManagerPro.daemon.plist
[not loaded] com.micromat.TechToolProDaemon.plist
[not loaded] com.microsoft.office.licensing.helper.plist
[not loaded] com.orbicule.witnessd.plist
[not loaded] com.sierrawireless.SwitchTool.plist
[not loaded] com.stclairsoft.AppTamerAgent.plist
[not loaded] org.macosforge.xquartz.privileged_startx.plist
[not loaded] pcloudd.plist
Launch Agents:
[loaded] com.divx.dms.agent.plist
[loaded] com.divx.update.agent.plist
[loaded] com.epson.epw.agent.plist
[loaded] com.lacie.raidmonitor.daemon.plist
[loaded] com.lacie.safemanager.daemon.plist
[loaded] com.micromat.TechToolProAgent.plist
[loaded] com.orbicule.WitnessUserAgent.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[not loaded] .DS_Store
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
[loaded] com.divx.agent.postinstall.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.propaganda.dejavu.dvmonitor.plist
[loaded] com.valvesoftware.steamclean.plist
[loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
iTunesHelper
Synergy
TomTomHOMERunner
Dropbox
3rd Party Preference Panes:
Déjà Vu
Flash Player
Flip4Mac WMV
GR-55
Paragon NTFS for Mac ® OS X
Perian
Printopia
TechTool Protection
Witness -
I always update my iPad without any problem , but this time it didn't work out . My iPad 4 is still downloading from yesterday and I can not meanwhile open any website or any mail . Can you tell me what went wrong ??
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
Lock symbol appearing before next to the top right power % display after rebooting the ipad. Anyone has answer what went wrong? Thank you for your help.
You have enabled Rotation Lock.
http://support.apple.com/kb/HT4085 -
What went wrong? can someone help?
ok here is a question,i do not know what went wrong,but one day i plug in my ipod,and you know how it say do not disconnect right?Well my will say that untill the battery goes dead, and this here is a problem i have been dealing with for a long time!! I have tried the 5 R and everthing,someone please try to help
The "Do Not Disconnect" message is perfectly normal if your iPod is manually managed, or is set to automatic sync but you have disk use enabled. It's possible some settings have been changed accidentally to give one of these.
To check which you have, connect the iPod, open iTunes, go to edit>preferences>iPod.
If you are manually managing songs you will always need to eject the iPod after each connection by clicking the small icon at the left hand source pane next to the iPod in iTunes.
If on the other hand you are automatically syncing music, uncheck disk use on the preferences page and your iPod will automatically disconnect after each update is complete.
For more information on disconnecting and the "Do Not Disconnect" message, see these:
About the "Do Not Disconnect" and "OK To Disconnect" screens on iPod:
http://docs.info.apple.com/article.html?artnum=61685
Safely Disconnecting the iPod:
http://docs.info.apple.com/article.html?artnum=61135 -
iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
I don't have Apple Care, what to do? Spend more money and buy a new phone?Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
I myself, two days ago purchased a 2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
SHAME ON YOU! -
Dear all,
I`m trying to figure out what went wrong with my database.
During the higher load the users were suddenly getting DBIF_RSQL_SQL_ERROR, no matter what they wanted to do. When checking system I found many messages like:
Database error -1000 at OPC access to table REPOLOAD
> POS(1) Too many lock requests
> Include ??? line 0000.
Run-time error "DBIF_REPO_SQL_ERROR" occurred
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
Database error -1000 at OPC
> POS(1) Too many lock requests
Database error -1000 at OPC
> POS(1) Too many lock requests
Database error -1000 at OPC
> POS(1) Too many lock requests
Database error -1000 at EXE
> POS(1) Too many lock requests
According to documentation I found error -1000:
1000: Too many lock requests
Explanation
There are too many locks or lock requests.
User Request
You can try to repeat the SQL statement at a later time or cancel the transaction. If this situation occurs frequently, then the MAXLOCKS general database parameter is too small and should be increased
Database kernel showed following messages:
2009-12-07 16:04:18 8126 ERR 5 Catalog Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
2009-12-07 16:05:13 8170 ERR 5 Catalog Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
2009-12-07 16:10:13 8182 ERR 5 Catalog Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
2009-12-07 16:15:09 8229 ERR 5 Catalog Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
2009-12-07 16:15:13 8123 ERR 5 Catalog Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
So do you think it is just about MAXLOCKS parameter or also with catalog cache sizing could be wrong ?
Version : MaxDB 7.6.6.7.
Thank you for your comments.
Pavol> Database error -1000 at OPC
> > POS(1) Too many lock requests
> 1000: Too many lock requests
> Explanation
> There are too many locks or lock requests.
> 2009-12-07 16:04:18 8126 ERR 5 Catalog Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
> So do you think it is just about MAXLOCKS parameter or also with catalog cache sizing could be wrong ?
> Version : MaxDB 7.6.6.7.
Hi there,
it's really just about the MAXLOCKS setting.
As you seem the "Catalog update failure"-message also points out error no. -1000.
It's the same "too many lock requests" error as before.
Having a MAXLOCKS value of 1.000.000 or even 3.000.000 is not unusual with MaxDB!
regards,
Lars -
After many years of working with pc's I've just had my first hard crash - ever! This is also the first pc I've ever built.... The rig has been up & running for 2 weeks with zero problems. I run Seti on 2 processor threads using SetiHide, resulting in 100% activity. The CPU has the stock Intel fan & ran real hot (69°) until I upgraded the BIOS from v1.2 to v1.9. Last weekend (17/18th), I played with some overclocking, getting up to 215fsb before dropping back to standard earlier this week.
Can anyone help me diagnose what went wrong please?
CPU temp 59° full load, 40° idle
NB temp 54°
System 38°
HDD 25°
System is PIV 3.2gHz/800 HT mode, BIOS v1.9, FSB set to 201, memory voltage 2.65v. Memory is Kingston approved KVR400X64C3AK2/1g in dual channel mode.
Software: WinXP Pro latest patches, McAfee AV v7.0 Enterprise, Palm Hotsync, MS ISA Firewall, pc linked to Win2k server.
Software running at the time: Outlook 2003, Setihide (2 processor mode), Musicmatch 8.2 (playing music from hdd), 2x IE6, Commence (relational dbase).
I was just working typing something in Outlook & it crashed with no warning. The PC had been on for about 10 hours.
This pc use is normal for me, nothing unusual was being done. The ONLY thing unusual was an hour or so before, I connected my APC UPS to a USB port & therefore running the UPS service. Could that cause the hard crash?
Steps taken: FSB back to 200, memory voltage back to 2.5v, unloaded UPS service & unplugged the UPS cable, unloaded Seti.
Next step: run memtest86
This really messed up my day..
Edited CPU idle temp - because shutting SetiHide doesn't shut the Seti processes!Vango
I got back up & running straight away, thanks.
Running apps are listed in my first post, active windows were:
Quote
Outlook 2003, Setihide (2 processor mode), Musicmatch 8.2 (playing music from hdd), 2x IE6, Commence (relational dbase).
I was using an Outlook new mail window doing a quote for a customer. So I was jumping between IE windows checking prices etc. At the exact point of the crash I was in Outlook typing something. Musicmatch was playing mp3s from my hard drive. Seti was running full blast. Also about an hour previously I had connected an APC 500VA Back-UPS CS to a USB port. This activated the WinXP UPS service, which was not running previously. In fact when I set up computers, I never connect the UPS to the pc - due to problems! -
What went wrong? misuse? abuse?
ive had my iphone for sometime now, bought it back in june of 2009... had some problems, it was replaced the last time...
about a week ago i had been running around from work and other places with no real time to charge my phone, it had gone dead before i got home to charge it, no big deal as this wasnt the first time... i charge it all friday night and didnt use it until sunday, went to use it sunday and it wouldnt power on... i try it again and again, still not working... i call apple support the say its the battery, they send a box and i pay $80 to have this replaced...
i wait 4 days and still hear nothing, the status hasnt been updated online, i call and they say that it wasnt the battery and that it was a hardware issue and they were going to send me a replacement phone, which was ok with me as long as the problem was solved... said the phone would be here the following day...
today i get an email stating this:
Your IPHONE 3GS has been inspected by Apple technicians, who have determined that it has been subjected to accidental damage or misuse, which is not covered by the warranty or an Apple service contract. Therefore your original product is being returned to you unrepaired. You should expect to receive it within two business days along with a letter that gives details of this assessment. Apple will send you a separate email to indicate that this service request is complete and to provide the tracking information for the shipment.
what went wrong is all i want to know, i know i didnt drop this phone at all, i know for sure it was never subject to misuse or abuse, let alone anywhere close to water to have any kind of water damage.. So now im getting my old phone back that will not power on... what am i suppose to do with that?Call iPhone support at 800-myiphone. Let them know you sent your phone in for service and it was returned to you stating it had liquid damage. Tell them you've checked the indicators and they are not tripped. The Advisor on the phone can check the pics that were taken of your phone when it was sent it to confirm this. If this is the case they can note this in the system and override it and you can send it back in for warranty.
If they are tripped you can still send it in and have them check the internal sensors vs. the outer. Apple has recently changed their policy to warranty devices with liquid damage as long as the INTERNAL sensors are not tripped, only the externals. -
What went wrong with Nokia Messaging?
What went wrong with Nokia Messaging?
In the beginning of this year I used Nokia Messaging on E71 and I really loved it!
Since this autumn I am using it on my new N97 and I am confronted with totally different experience:
- the application is very slooooow..
- its unreliable - very ofter emails arrive with hours delay, a sync may take up to minutes
- its very very buggy - truncated icons, diplay randomly jumping up and down, when scrolling.
- very bad HTML display of emails - tiny (unreadable) default font and no wrap to screen when zooming - I thought emails were for reading?
- many, many usability issues
I just cannot believe it - How has Nokia managed to convert once such a good piece of software into such incredible disaster?
Recently an update was published - I tried it immediately... To my big disappointment it contains all the same bugs and introduces new ones..
How is this possible? What is happening at Nokia?Also my N86 as the same problem.
And in global setting Nokia deleted the option to read always in HTML.
And there is not any option to write html Mails -
TS1424 When I made purchase it pop up " your session has time out, pls try again" what went wrong?
When I made purchase it pop up " your session has time out, pls try again" what went wrong?
For me this happened on the 25th of September.
Before lunch I updated a few apps, when I tried in the afternoon I had to answer some security question. And no matter what I got The session timeout message.
I use the new iPad and I have IOS6.
Just tried on my iPhone4 with IOS6 and it worked.
Maybe you are looking for
-
Unexpected database connector error
Hi Team, I am trying to do Dynamic database change for Crystal reports and i 'm struggling with the following error. I am following below code listed in the following link CRJava Modify DB Location Please help me in resolve this issue. I have been st
-
Camera does not work correctly after op system update
UUpdated op system and now camera does not function. Reset pad and made no difference
-
DPM 2012 Agent installation issue
I have SCDPM 2012 RTM installed on my machine and whenever I try to install the agent remotely , DPM services stops and installation stucks at 1 percentage, Mohan Kumar.
-
The User Profile Service failed the logon
Hi Over the last few weeks I have had literally 100's of my customers reporting this problem The usual "The User Profile Service failed the logon" message comes up when they try to login I have been fixing each time by changing the profilelist regist
-
When I hit command-D, the "page bookmarked" window appears as usual, but the area where you normally see a list of bookmark folders is empty. When I look at all my bookmarks (Bookmarks >Organize Bookmarks), the folder called "All Bookmarks" appears a