What will happen if i load transaction data first?

HI,
With out master data if i load transactional data , what will happen?
While loading master data then only SID will be created, If i load Transactional data first means when will SID will be create?
-Arun.M.D

Hi,
We can upload the transaction data even we have not yet uploaded the master data. But the upload of Transaction data will take more time in case if the Master data has not yet been uploaded.
So for performance point of view,it is recommended to upload the master data as first upload.
With rgds,
Anil Kumar Sharma .P

Similar Messages

What will happen when I refresh transaction page?

Hi Friends,
I am getting the credit card details and other user info using JSP front end. I am passing these values to payment gateway page. What will happen when I keep on refreshing the payment gatway page when transaction is happening?
regards,
sampath

the request will keep being reposted

I support a very large school district currently running Firefox 3.6. What will happen at end of life date? We're in the middle of online testing this week.

I run the test center for a very large school district with over 120k students. We've got a current deployed base of 54k client machines using Firefox 3.6. We haven't upgraded due to multiple reasons, the most important of which is removing the possibility of using In Private Browsing from the students, and dealing with plugin-updates for the non digital natives (read dumber than a bag of hammers users) that make up the majority of the client base.
We're testing ESR now, but just found out that end of life for 3.6 is tomorrow, 4/24. We are currently in the middle of statewide online testing. The question is, what will happen tomorrow when the browser goes end of life. The ESR wiki mentions that "an update to the current version of Desktop Firefox will be offered through the Application Update Service"
So the main question is, are my students/teachers going to get a popup telling them they have to update the browser if we have the updates already turned off? If so, can I turn it off remotely using SCCM, because it will cause all kinds of havoc.
Please advise asap, and thanks in advance.

We had to do some serious gymnastics to remove at least most of the ability to use IPB. We removed it from the gui, but unfortunately, if they know the hotkey, they can still bring it up. Security has some serious headaches with this, as by law they have to be able to track where students go, and going with private browsing removes their ability to do forensic work they're required to be able to do. Not a very well thought out feature from Mozilla in my opinion, but it is what it is. Successive versions have made it even more difficult to remove even the gui portion.
We do plan to release ESR due to the aforementioned security issues, but testing has been slow.
But thanks for the reply. I think we can turn off the updates if it isn't already done.

What will happen to my unlimited 3G data plan if VZW gives me the Samsung Droid Charge 4G phone?

I currently have the Samsung Fascinate and the unlimited data plan, with a 20% corporate
discount . The 2-year contract started when I bought the Fascinate in November 2010.
If I'm not mistaken, my unlimited plan is grandfathered in, even after Verizon changed the
2GB limit for data plans.
There is no 4G service in my part of the state. There won't be 4G for at least 2 years,
according to the Verizon corporate store manager. My part of the state was the second
to last to get 3G on the east coast.
If I take Verizon's offer and accept the Samsung Droid Charge 4G as a replacement phone,
what will happento my existing unlimited 3G data plan? Can they activate the 4G phone
on a 3G data plan?
Will the 4G phone pick up 4G signal when I travel to a major city with 4G service? (nearest
city with 4G is 230 miles away)

SFObrien wrote:
If I understand their policy correct you will continue your current unlimited 3G plan and have access to 4G in coverage areas as long as you DON'T change your plan. If you change your plan new rates will apply.
Can one of the Verizon guys here verify this?
Consider it verified, Steve!

What will Happen if I add two dates

Hello experts
I tried adding Dates like July 1 + 1 = July 2
but I havent tried adding Dates with different months, Im wondering what will the results be,
example. February 15, 2006 + July 1, 2006
what the result would be?
and what if I tried to add dates woth different year like
March 15, 2004 + December 30 2006, what the outcome shoukd be?
what FM could I used in doing so???
Regards and Thanks,
Christopher

HI
GOOD
CHECK OUT THIS REPORT,IT MAY HELP YOU TO SOLVE YOUR PROBLEM,
Data: v_date(8).
V_date = '20030102'.
VAL_DATE <DATE> <FORMAT> <-- Passing Parameters
val_date v_date 'YYYYMMDD'.
if sy-subrc = 0.
    write: 'Valid Date' .
elseif sy-subrc = 1.
    write: 'Invalid Date' .
elseif sy-subrc = 2.
    write: 'Invalid Date Format' .
endif.
                  END OF REPORT                    *
To use the macro "VAL_DATE" GLOBALLY, Insert the *
below 2 macros in table TRMAC using Txn SM30.     *
Sytax :                                            *
VAL_DATA <Date> <Date format>.                     *
It return sy-subrc.                                *
      0 => Valid date - as per the specified format*
      1 => Invalid date                            *
      2 => Invalid date format                     *
<Date format> :                                    *
You can pass the following date formats            *
DDMMYYYY MMDDYYYY YYYYMMDD YYYYDDMM             *
              Macro    VAL-DATE                    *
This macro validate Date according to the specified*
format.                                            *
           Created by Abhishek Kumar               *
           [email protected]                        *
define val-dat.
clear: %_date1, %_date2.
%_date1(4)   = &1. "Year
%_date1+4(2) = &2. "Month
%_date1+6(2) = &3. "Date
%_date2 = %_date1 - 1.
%_date2 = %_date2 + 1.
if %_date1 <> %_date2.
    sy-subrc = 1.
else.
    sy-subrc = 0.
endif.
end-of-definition.
              Macro    VAL_DATE                    *
           Created by Abhishek Kumar               *
           [email protected]                        *
define val_date.
data %_date1 like sy-datum.
data %_date2 like sy-datum.
data %_date3(8).
case &2.
    when 'DDMMYYYY'.
      val-date &14(4) &12(2) &1+0(2).
    when 'MMDDYYYY'.
      val-date &14(4) &10(2) &1+2(2).
    when 'YYYYMMDD'.
      val-date &10(4) &14(2) &1+6(2).
    when 'MMYYYYDD'.
      val-date &12(4) &10(2) &1+6(2).
    when others.
      sy-subrc = 2.
endcase.
end-of-definition.
THANKS
MRUTYUN

I have an old Ipod which I loaded music many years ago. . .I no longer have the itunes which I originally loaded, however, I have a new itune account with songs loaded. . what will happen if I load these songs onto my ipod today?

I have an older ipod which many years ago I loaded my music from Itunes on another computer. . .that computer crashed. . .I now have a new Itunes account and music loaded on another computer. . I would like to add songs onto my ipod. . .can this be done?

Not without erasing what is currently on the iPod first, since an iPod can only be synced with one computer/iTunes library at a time.
A better way to go about it, is to copy everything currently on the iPod to your new iTunes library first. Then connect it to iTunes and either choose the Erase and Sync option or restore the device to allow it to start syncing with the new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

What will happen to ongoing transaction in RAC if the node fails?

In my RAC setup with three nodes .....if there are few transactions going on one node and the same node fails what will happen to those ongoing transactions........i mean will they be rollback....or what?????????
Thanx in advance
Gagan

this is an sqlplus feature. If you do not useSQLPLUS, but something like toad or any other client,
it will not work.
But, it gonna work with middleware softwares.well, if sqlplus could do it, another software could do the same. The trick is, you must reexecute the same select and be sure to get the rows in the same order !!!
If you do a fetch, this is ok, there is well a "select cursor" failover, but for a "bulk select", you should restart your query.
>
well, the transaction will be rollback and you willlose contact if you use sqlplus
Not necessarly, if you configured load balance, then,
you wont loose the connection.Will not you? I must try it one day, I just removed RAC from my notebook last week because of the lack of disk space...
>
the select actually reexecutes on the other node insqlplus, but you only "see" the lines comming after
the current ones (but the whole select is
reexecuted)
Exactly, but, user wont realizes this.apart from the time he will have to wait, which can be quite long if the query already returned 90% of the rows...
>
Go through the link which I have provided in my
earlier reply for more understanding on type of
failover and load balance.well, quite unclear actually :
Therefore, with Transparent Application Failover, a client notices no connection loss as long as one instance remains active to serve the application... there is no "connection loss", which does not mean there is no "loss" !
http://download-west.oracle.com/docs/cd/B10501_01/network.920/a96580/advcfg.htm
Active Transactions
Any active transactions are rolled back at the time of failure because TAF cannot preserve active transactions after failover. The application instead receives an error message until a ROLLBACK is submitted.
which means, your application must manually resent the transaction or whatever is appropriate

What will happen if I downloaded the iOS 7 in my ipad mini? What will happen to my data, photo and downloaded apps before (ios6).

What will happen if I downloaded the ios7 in my iPad mini? What will happen to my saved photo, data and otherdownloaded apps in ios6? Will all of that erased?

The advice to back up is good.
And one other thing. If you don't currently use a passcode to use your iPad, I really recommend you set one up before you update. Just make sure you either know what your currently use, or if you set one up, you write it down somewhere safe for future reference.

If a new apple id sign in.what will happen to the old apple id if you erase or reset the phone?

I buy a new iphone 5s and the store open it and put his apple id to download some stuff.. And after that i try to make my own apple id. What will happen if i erase all data and it is in need of apple id.. Will it be the old apple id or my apple id?? I heard that if i erase all data. The apple id of which i buy my iphone will appear and mine will not??

If the store setup the phone with an Apple ID/Password, that is not yours, & turned on Find My Phone, then you will need that Apple ID/Password to re-activate the phone. Called Activation Lock. Read here:
http://support.apple.com/kb/PH13695
So, go back to the store where you got this phone & have them fix things.

What if i load transaction data without loading master data

Hello experts,
What are the consequences if i load transaction data without loading master data?Are there any other factors except the load performance because of SID generations etc and inconsistencies.
<b>What kind of potential inconsistencies will occur?</b>
Problem here is:
when the transaction load starts a new master data such as employee(x) would be have been created in R/3 which does not exist in BW and hence transaction load fails.
Thanks and Regards
Uma Srinivasa rao

Hi Rao,
In case you load the master data after loading the transcation data and if there is any look up at the master data in teh update rules, then you can delete and reconstruct the requests in the ODS/Cube so that the latest master data is pulled in in the data target.
Make sure you do the Apply hier/attr change before doing the delete and reconstruct.
Bye
Dinesh

While loading transaction data into cube what are the tables generats

Hi,
while loading transaction data into cube what are the tables normally generats.

Hi,
Normally datas will be loading to 'F'- Fact tables (/BIC/F****) *** - cube name..
When you do compress the request the data will be moved into E tables.
Regards,
Siva.

I'm worried about what will happen if I delete my recent backup data from the phone I still own? Will I lose any progress in games that was saved in the backup?

I'm worried about what will happen if I delete my recent backup data from the phone I still own? Will I lose any progress in games that was saved in the backup?
I have an iPhone 4S and I keep getting those irritating notifications that tell me I need to upgrade my storage or free up space. I've deleted all I can from my music and photos without losing too many precious memories, but it's come to the point where I think I need to delete backups. However, I'm just worried that I will lose all and any log-in information that I don't remember and app/game progress that was saved to the iCloud. Please Tell me what will happen/what I can do?

If you are asking what happens when you delete an iCloud backup, it only deletes the backup from your account. It won't do anything to the data on your phone or in your iCloud account. If you don't need to backup you can delete it. (If you no longer want to back up your phone to iCloud, turn iCloud backup off in Settings>iCloud>Backup. Then your phone will back up to your computer each time you sync it with iTunes.)

My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?

My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?

I never used icloud before so there is no data to back up from. I just spoke to the apple store and they said that if I do plug it in, all the data will be swiped....is there a program I can use to transfer my data from my phone to computer without loosing it all ???
Renee

What will happen if i mention like load-on-startup -1 /load-on-startup ?

Hi All,
In my web.xml what will happen if i mention like <load-on-startup>
-1</load-on-startup> ?

It's not WebLogic-specific, the load-on-startup web.xml element is a standard common component to all application servers.
As for what it does, then yes, the BEA link explains it well enough. So that explanation applies to WAS too.

How the data is stored in Info cube...in the back end what will happen???

Hi Experts,
How the data is stored in Info cube and DSO...in the back end what will happen???
I mean Cube contain Fact table and Dimension tables How the data will store and what will happen in the backend???
Regards,
Swetha.

Hi,
Please check :
How is data stored in DSO and Infocube
InfoCubes are made up of a number of InfoObjects. All InfoObjects (characteristics and key figures) are available independent of the InfoCube. Characteristics refer to master data with their attributes and text descriptions.
An InfoCube consists of several InfoObjects and is structured according to the star schema. This means there is a (large) fact table that contains the key figures for the InfoCube, as well as several (smaller) dimension tables which surround it. The characteristics of the InfoCube are stored in these dimensions.
An InfoCube fact table only contains key figures, in contrast to a DataStore object, whose data part can also contain characteristics. The characteristics of an InfoCube are stored in its dimensions.
The dimensions and the fact table are linked to one another using abstract identification numbers (dimension IDs) which are contained in the key part of the particular database table. As a result, the key figures of the InfoCube relate to the characteristics of the dimension. The characteristics determine the granularity (the degree of detail) at which the key figures are stored in the InfoCube.
Characteristics that logically belong together (for example, district and area belong to the regional dimension) are grouped together in a dimension. By adhering to this design criterion, dimensions are to a large extent independent of each other, and dimension tables remain small with regards to data volume. This is beneficial in terms of performance. This InfoCube structure is optimized for data analysis.
The fact table and dimension tables are both relational database tables.
Characteristics refer to the master data with their attributes and text descriptions. All InfoObjects (characteristics with their master data as well as key figures) are available for all InfoCubes, unlike dimensions, which represent the specific organizational form of characteristics in one InfoCube.
http://help.sap.com/saphelp_nw04s/helpdata/en/4c/89dc37c7f2d67ae10000009b38f889/frameset.htm
Check the threads below:
Re: about Star Schema
Differences between Star Schema and extended Star Schem
What is the difference between Fact tables F & E?
Invalid characters erros
-Vikram

What will happen if i load transaction data first?

Similar Messages

Maybe you are looking for