What would be the SQL statement?

What would be the SQL statement to pull data from the current week that the data was queried, regardless of what day of the current week that you queried the data?

WHERE Date_Col >= TRUNC(SYSDATE, 'DY')
Note that the first day of the week depends on national settings:
SQL> alter session set nls_territory = 'AMERICA';
Session altered.
SQL> SELECT TRUNC(SYSDATE, 'DY') FROM DUAL;
TRUNC(SYS
20-JAN-08
SQL> alter session set nls_territory = 'GERMANY';
Session altered.
SQL> SELECT TRUNC(SYSDATE, 'DY') FROM DUAL;
TRUNC(SY
21.01.08Regards,
Dima

Similar Messages

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
Rahul

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
Rahul
Can you post the output of below query
select @@version.
If you are using SQl server express edition ,SQL server agent feature is not available.It seems from errorlog that you can start it but actually you cannot.But first confirm what is version and edition of your SQL server
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Setting the sql statement

http://www.egbolig.dk/drift_bo_syd.rpt (HERE IS THE REPORT)
We are using SAP Crystal Report .NET Runtime files (http://scn.sap.com/docs/DOC-7824 newest version 13.0.9.1312) in our web asp.net application. Everything have been working fine, but we have can into problems when showing the certain kinda reports.
In our code get the reports sql statement using getSQLStatement.
Dim gp As New GroupPath() Dim sql As String = report.ReportClientDocument.RowsetController.GetSQLStatement(gp)
This will get the sql, and we use this sql (getSqlStatement) and attach a sql WHERE clause from the code to only get a certain number of records.
The report Drift_bo_syd.rpt has 5 tables, and the following sql statement.
Database/Show Sql Statement
SELECT "rekvstam"."Sel", "rekvstam"."Afd", "rekvstam"."Levadresse", "rekvstam"."Rekvisition", "rekvstam"."Lejemaal", "rekvstam"."Lejer", "rekvstam"."Udfoertaf", "rekvstam"."Udfoertdato", "rekvstam"."Krit", "Selskab"."Adresse", "Selskab"."Postby", "Selskab"."Tlf", "Selskab"."Fax", "rekvstam"."Kontor", "rekvstam"."Hjemme", "rekvstam"."Rekvdato", "rekvstam"."Aftale", "rekvstam"."InitialRet", "rekvstam"."Arbejde", "kreditor"."Att", "rekvstam"."Konto", "Selskab"."Navn", "Selskab"."Email", "Interessentadresse"."Navn", "Interessentadresse"."Adresse", "Interessentadresse"."Postby", "Interessentadresse"."Email1", "Interessentadresse"."Telefon_Fax", "Interessentadresse"."Type", "Interessentadresse"."Tlf1", "rekvstam"."tlfLejer", "kreditor"."Kred", "Interessentadresse"."Interessentnr" FROM (("Rekvstam" "rekvstam" INNER JOIN "Selskab" "Selskab" ON "rekvstam"."Sel"="Selskab"."Sel") LEFT OUTER JOIN "Kreditor" "kreditor" ON "rekvstam"."Kred"="kreditor"."Kred") INNER JOIN "Interessentadresse" "Interessentadresse" ON "kreditor"."Interessentnr"="Interessentadresse"."Interessentnr" WHERE "Interessentadresse"."Type"='K'
But if we run the report from our asp.net code, we get the following error:
Cannot determine the queries necessary to get data for this report. Failed to retrieve data from the database. Error in File Drift_Bo_Syd {97FED382-1BAC-4DB1-970F-9E098ECE28F1}.rpt: Failed to retrieve data from the database.
After a long time searching for a solution, we found out that if we place the column kred from the kreditor table on the report, the report will work. (field explorer / database fields / kreditor (table) / kred (column)
Very important is that the field "kreditor.kred" is a primary key of the table kreditor, and also used in the linking.!
(We can get the report to work if we call the sql statement with the "kreditor"."kred" in the SELECT statement.
SELECT "kreditor"."kred", "rekvstam"."Sel", "rekvstam"."Afd", "rekvstam"."Levadresse", "rekvstam"."Rekvisition", "rekvstam"."Lejemaal", "rekvstam"."Lejer", "rekvstam"."Udfoertaf", "rekvstam"."Udfoertdato", "rekvstam"."Krit", "Selskab"."Adresse", "Selskab"."Postby", "Selskab"."Tlf", "Selskab"."Fax", "rekvstam"."Kontor", "rekvstam"."Hjemme", "rekvstam"."Rekvdato", "rekvstam"."Aftale", "rekvstam"."InitialRet", "rekvstam"."Arbejde", "kreditor"."Att", "rekvstam"."Konto", "Selskab"."Navn", "Selskab"."Email", "Interessentadresse"."Navn", "Interessentadresse"."Adresse", "Interessentadresse"."Postby", "Interessentadresse"."Email1", "Interessentadresse"."Telefon_Fax", "Interessentadresse"."Type", "Interessentadresse"."Tlf1", "rekvstam"."tlfLejer", "kreditor"."Kred", "Interessentadresse"."Interessentnr" FROM (("Rekvstam" "rekvstam" INNER JOIN "Selskab" "Selskab" ON "rekvstam"."Sel"="Selskab"."Sel") LEFT OUTER JOIN "Kreditor" "kreditor" ON "rekvstam"."Kred"="kreditor"."Kred") INNER JOIN "Interessentadresse" "Interessentadresse" ON "kreditor"."Interessentnr"="Interessentadresse"."Interessentnr" WHERE "Interessentadresse"."Type"='K'
But it should not be necessary to include this field (which is the primary key and used in linking the report) in the sql statement,
BECAUSE it is not used in the report. So maybe this is a bug?
It has not been necessary in RDC Crystal Report or RAS Crystal Report in a classic asp envoriment.
Here is the code we use to set the reports SQL Statement)
Try
Dim conn As New SqlConnection(connString)
conn.Open()
Dim sd As New SqlDataAdapter(New SqlCommand(nySQL, conn))
Dim ds As New Data.DataSet()
Dim navn As String = report.Database.Tables.Item(0).Name
sd.Fill(ds, navn)
report.SetDataSource(ds)
conn.Close()
Catch ex As Exception
Throw
End Try

Hi Jan
I understand your problem completely but we have asked R&D to be able to edit the SQL and they explained due to how the report Engine works it's simply not possible anymore. It would take a complete rewrite in all of our DB drivers and query dll's to be able to allow it. They did that in CR 9 when they rewrote the DB drivers and removed the SQL part of the code into separate dll's and that is when the ability was removed, it's been that way ever since.
One possibility is to get the SQL from the Report and then connect to your DB using a .NET and if the results from the SQL is less than 5K rows and not too many columns you could then set the Report data source to a Dataset.
As long as all of the field names are the same CR will run the report using this work flow.
For data larger than 5K rows, limit is due to memory resources, you could save the DS to an XML file and then set the reports data source to the XML file. We've seen 100meg XML's used so the amount of data should not be a problem, but of course there are limits to everything so test...
This should not affect performance much.
So the work flow would be:
Load the report
Get the SQL Statement
Paste it into a Dataset Query
Something like this should get you started:
//string connString = "Provider=SQLOLEDB;Data Source=MySQLServer;Database=xtreme;User ID=sa;Password=pw";
string connString = "Provider=SQLNCLI10;Server=MySQLServer;Database=xtreme;User ID=sa;Password=pw";
Detail"".""Quantity"" FROM   ""xtreme"".""dbo"".""Orders Detail"" ""Orders Detail""";
string sqlString = @"SELECT top 10* FROM ""xtreme"".""dbo"".""Financials"" ""Financials""";
System.Data.OleDb.OleDbConnection oleConn = new System.Data.OleDb.OleDbConnection(connString);
System.Data.OleDb.OleDbCommand cmd = oleConn.CreateCommand();
cmd.CommandText = sqlString;
System.Data.DataSet ds = new System.Data.DataSet();
OleDbDataAdapter oleAdapter = new OleDbDataAdapter(sqlString, oleConn);
//OleDbDataAdapter oleAdapter2 = new OleDbDataAdapter(sqlString2, oleConn);
DataTable dt1 = new DataTable("Financials");
//DataTable dt2 = new DataTable("Orders Detail");
oleAdapter.Fill(dt1);
//oleAdapter2.Fill(dt2);
ds.Tables.Add(dt1);
//ds.Tables.Add(dt2);
ds.WriteXml("c:\\reports\\sc2.xml", XmlWriteMode.WriteSchema);
// as long as the field names match exactly Cr has no problems setting report to a DS.
try
    rpt.SetDataSource(ds.Tables[0]); // incremtent [0] for more than 1 table.
    rpt.SetDataSource(ds);
catch (Exception ex)
    MessageBox.Show("ERROR: Schema Mismatch. Error reported by CR: " + ex.Message);
//Now check for subreport and set to same DS
foreach (CrystalDecisions.CrystalReports.Engine.Section section in rpt.ReportDefinition.Sections)
    foreach (CrystalDecisions.CrystalReports.Engine.ReportObject reportObject in section.ReportObjects)
        if (reportObject.Kind == ReportObjectKind.SubreportObject)
            CrystalDecisions.CrystalReports.Engine.SubreportObject subReport = (CrystalDecisions.CrystalReports.Engine.SubreportObject)reportObject;
            CrystalDecisions.CrystalReports.Engine.ReportDocument subDocument = subReport.OpenSubreport(subReport.SubreportName);
            subDocument.SetDataSource(ds);
And for XML it would use this part, not above I am saving the data and structure in the XML file so it should match what is in the report:
foreach (CrystalDecisions.CrystalReports.Engine.Table rptTable in rpt.Database.Tables)
    try
        rptTable.Location = btrDataFile.ToString(); // @"D:\Atest\" + rptTable.Location + ".xml";
    catch (Exception ex)
        MessageBox.Show("ERROR: " + ex.Message);
Only issue you may run into is sometimes XML does not have a direct field type and your original data source but you'll get an error if that happens which could be trapped and handled.
If you have a report that only uses 2 tables I do have code that will convert it to use a Command Object. That is the limit the engine is capable of, there is a lot of logic to be able to do this in CRD and the SDK so that is all we could get for now.
I hope that helps
Don

BIDS 2008 DataFlow viewer not showing even though the sql statement returns data

Have a dataflow and trying to see why no rows are being written to the destination. I popped a viewer on the connection, but it doesnt show up when I run. What can I check?
The DataFlow source runs a sql statement and it runs fine and returns a result.

Why would that be if I can execute the sql statement that is being used in the OLEDB Source, and I get a result, yet the destination gets no rows afterwards. Even executing the Dataflow task by itself, no rows are written.
I do have a script task that modifies the connection before the dataflow, but this was working fine yesterday :)
Even so, if there was a problem with the connection, I would get an error. There no no errors, it just sees no rows and the dataviewer is never displayed.
What the heck can I check?

How to monitor the sql statement running?

Hi ,
i need to check the status of the sql script running on the database.
what is the way to chect that?
if the particular query is taking very long time what might be the reason?

Since you are [relatively] new at this ..
the recommended technique will change based on version of Oracle database, the edition of the database, the options of the database and the operating system.
For example, I would normally suggest a newbie with Oracle Database 10g or 11g Enterprise Edition to use the Enterprise Manager Diagnostics Pack. A demo thereof is on the Oracle BY Example site (http://otn.oracle.com) - look for Tutorials towards the top.
As for why ... it's waiting on things. Which things may depend on the database, the operating system, the disk subsystem, the network subsystem, memory allocation, sorting, other load, and even how well or badly the SQL statement was written.

Error when generating the SQL statement while running the Query

Hello SDN Mates,
Am using three cubes in one infoset and build a query on that. Intially it was running fine, but now am getting error generating the SQL statement. Can you please throw some light on this. Your idea would be highly appreciated.
Thanks and Regards
Arun S

Hi Arun
is there any change in the objects (Check also the consistency of infoobject ) included in infoset, just make sure those are active, open the query in designer and check if no error/warning message are present
Thanks
Tripple k

DIsabling printing of the sql statement in command prompt

Hi.
I am connecting to an access database with my java application. Problem is, it prints the connection and the sql statement there. Is there any way to disable it?
Example of what is seen at my command prompt:
connection is dbc:odbc:Inventory System
DB: SELECT * FROM Products WHERE ProductID = 1;

Ah i see where my mistake is now...Gracefully put. Many of the regulars here and in other forums get a little frustrated, either seeing the same basic problems over and over (it's as if Google doesn't work in vast parts of the world) or or the occaisional person who really isn't willing to work or willing to learn - they want "the answer". Sometimes after a bad run of that we get a little sensitive and snarky. Don't feel bad, there's a mountain to learn with JDBC and, personally, I think everyone is entitled to one brain f*rt a week (<snark> although this may count as one-and-a-half </snark>). Good luck.

How to isolate the Sql Statement from Java Code

Hi
I Need to know that can we segregate the Sql Statements and convert them to Stored Procedures so as to isolate the Sql statements from Java Code.
So i have one static web page which uses four select Statements so what i want is to create a stored procedure encapsulating these queries. So that the Java Web Developer will simply call the Stored Procedure instead of using four different SQL Statements.
Suppose the developer has these four Statements
Select ename,empno,sal,job from emp;
select empno,ename,mgr from emp;
select deptno,dname from dept;
select emp.ename,emp.empno,emp.deptno,dept,dname fromemp,dept;
So can i encapsulate these four Sql Statements in one Procedure and the Web developer can call the Store procedure and dont need to write the Sql Statements in his code.
Can Anybody guide me how to write this Stored type of Store procedure.
Thanks

http://www.google.com/search?q=java+windows+registry
Next time, search yourself. It might be beyond your belief, but you're really, really not the first person to wonder about this.

How do i see the sql statements that are run ?

i want to see (in a log file) what are the sql statements that oracle had ran.
how do i do it ? what configurations should i do ? how ?
please help ... thanks

Current SQL statements are viewed in dynamic tables:
SELECT SCHEMANAME, SQL_ADDRESS, SQL_TEXT, last_call_et
FROM V$SESSION, V$SQLAREA
WHERE V$SESSION.SQL_ADDRESS=V$SQLAREA.ADDRESS
A historical log of all SQL statements is recorded in Oracle Archived Logs, and can be viewed using the Oracle Logminer approach. This process requires your database to be in ARCHIVELOG mode, and that Logminer be configured to read the archived logs.

Log for all the sql statement executed

Hi,
I would like to know how to see the log for all the sql statement executed starting from connection to all the database related actions.
Is it something that i need to set it up in the driver?
I'm using Tomcat and JDBC driver.
Please reply.
Thanks,
Anjana

Make your own.
Calendar cal = new GregorianCalendar();
int year = cal.get(Calendar.YEAR);
int month = cal.get(Calendar.MONTH) + 1;
int day = cal.get(Calendar.DAY_OF_MONTH);
//use calendar object to get other infos such as time of query
//append your query string
File f =new File ("c:\\jakarta-tomcat-3.2.4\\webapps\\ASD\\LOGS\\log" + df.format(day) + df.format(month) + year + ".txt");
               if (! f.exists())
                    f.createNewFile();
               FileWriter fw = new FileWriter (f, true);
               // append new log to end of file
               fw.write(buf.toString());
               fw.write("\n");
               fw.flush();
               fw.close();
          catch (IOException ioe)
               System.out.println(ioe.toString());

Find all the sql statements that are executed in a database

Hi
I would like to get all the sql statements that have been executed till now on the database. Also, i need the session and user details who has executed the statement.
I know this can be done after enabling auditing.
I would like to get the details without enabling the auditing option.
I am using oracle 9i and oracle 10g.
Regards,
Vamsi

You can use {noformat}{noformat} tags to preserve the SQL format. Below is an example of how to use it.
<place your code here>\When your do that your code may look like this.select
     substr(sid || ',' || serial#,0,15) sid,
     USERNAME,
     PROGRAM,
     MACHINE,
     OSUSER,
     TERMINAL,
     sql_text Query
from
     v$sqltext,
     v$session
where
     address=sql_address
     and hash_value=sql_hash_value
     and status='ACTIVE'
order by LOGON_TIME,sid,piece
This one is more readable to everyone.

Get an set the SQL statement from a report at runtime

i know there is an opportunity to filter the records by using setRecordSelectionFormula() method...but i wondered if you can anyhow get the whole SQL statement that is in the report. i think it would be very useful for many developers to maipulate the SQL directly like you were able to using the PE-functions in the old CRPE32.DLL...
but in CR XI the CRPE32.DLL is no longer supported. now we have to substitute these functions with the JRC but i am not sure if it provides everything we had in the CRPE32.DLL...
after all i do not understand why the CRPE32.DLL is still delivered but not supported. in my CR XI R2 installtion i found this file signed with version 11.5.3.438
by the way it is a question of performance...a query would be faster if you could directly query the database by changing the reports sql statement instead of allowing the report to retrieve all data and then performing the filtering.
so please, for the next version of the JRC give us the opportunity to get an set the sql statement of a report directly!

Not an option. crpe32 is proprietory and the SQL we generate is to complex to assume it will be done correctly. Which is why the ability was removed

Toplink generate the SQL statement correctly but it does not return any row

Hi
I faced an strange problem when using Toplink as JPA provider. Following snippet shows how I create and execute a query using Toplink JPA:
q = em.createQuery("SELECT B FROM Branch B WHERE B.street LIKE :street");
q.setParameter("street", "'%a%'");
List<Branch> l = q.getResultList();
System.out.println("List Size: " + l.size());The SQL statement resulted by this query is as follow (according to the generated log file)
SELECT ID, STREET FROM BRANCH WHERE (STREET LIKE CAST (? AS VARCHAR(32672) ))
bind => [%a%]Problem is that List size is always 0, independent of what I provide as parameter. I tried and executed the generated SQL statement in the SQL manager and I got some tens of record as the result. The SQL statement i tested in the SQL manager is like:
SELECT ID, STREET FROM BRANCH WHERE (STREET LIKE CAST ('%a%' AS VARCHAR(32672) ))Can someone please let me know what I am missing and how I can fix this problem?
Thanks.

Hi,
Thank you for reply.
All data are stored in lower case so, the case sensitivity is not a problem. I am wondering how the generated query works fine when I execute it in the sql manager but it return no result when it is executed by the JPA.
Thanks for looking into my problem.

Limits to the SQL Statement when creating External Dictionaries

Limits to the SQL Statement when creating External Dictionaries
Does RC not provide the ability to concatenate multiple db columns into a single dictionary field? When trying a query like: SELECT Col1 + Col2 AS NewCol1 FROM Tbl1 we get an error("Unknown internal error") after clicking to save/create the new dictionary. This is on version 2008.3

What if you created a buffer table in your external database, that is populated by your field-merging query, and then invoke that from Newscale? The temporary table would be updatable by newscale (although, presumably, you wouldn't actually have newscale update it), so then it'd accept that connection.
For example, I think you could do something like that by creating a View in MS SQL Server. Likewise, in other database brands you could create a Trigger that would update the buffer table each time data in the real tables are changed.

Executing the SQL statement is not allowed - Error

I am getting "Executing the SQL statement is not allowed" for an INSERT cfquery that I'm running. I checked the usual suspects:
- DSN allows INSERT
- I've seen reports online where certain field names or values are considered key words, so for protection CF blocks the query in this way (it would be nice if there was a different error message when it gets blocked this way vs. the DSN doesn't allow INSERT error message). The field names and values were all benign strings, so it didn't seem like that.
I took the same string for the query and ran it on another page and it ran fine (same DSN, too).

SOLVED: I decided to enter this in here, just to get it into web searches for others since I couldn't find anything.
- I was calling a function for one of the values in the query: get_db_status_code("initialize") Apparently CF parses the query to see if it's allowed BEFORE it runs the CFML in it, so something in that function name, or the parameter "initialize" was a key word that CF doesn't allow. I moved the function call outside of the query and loaded a temp variable for use in the query and it then worked.

What would be the SQL statement?

Similar Messages

Maybe you are looking for