Whats the best workflow with REDCODE Footage?

Hi,
I Go an work on a Red code project. A Music clip shot on the RED ONE. I Was wondering: what is the best way to work with this 4k footage. There are much shoots in 100 frames who i need to ramp. So a fast editing way would be nice...
- Do i need to use the reference quick times from the camera?
- Do i need to trans code al the footage to SD and edit it, then before the compositing relink it to the 4k footage?
What is the best option? This is the first time i work with 4k from the RED ONE.
THANKS!
David Douglas

Well, I'd scan this forum here, for one:
http://www.reduser.net/forum/index.php
#2, don't work with 4K images natively...transcode to another format, like DVCPRO HD or other format and work from those, then conform to 4K when you are done...most likely on another system that can handle them, like SCRATCH.
But that forum is where to look for the answers.
Shane

Similar Messages

  • What the best way with no errors?

    Can anywon point me or tell me the best way of importing a
    flash object to dreaweaver so the seach engine does not find
    errors.
    like <embed> or ALT
    Is it best to use CCS or javascript?
    Any good links or information on how to set this up would be
    appreciated.
    Gary

    > Place your alternate content here? WHERE AND WHERE DO I
    Include a link to
    > <a
    > href="?detectflash=false">
    Ignore it.
    But follow the rest of the recommended procedure.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "ghi572000" <[email protected]> wrote in
    message
    news:[email protected]...
    > Thanks again Murry however I could do with a bit more
    help as I do not
    > fully
    > understand what Im reading as followed?
    >
    > Here is an example of what your embed should look like:
    >
    > <div id="flashcontent">
    > Place your alternate content here and users without the
    Flash plugin
    > or with Javascript turned off will see this.
    > Include a link to <a
    href="?detectflash=false">bypass the detection</a>
    > if you wish.
    > </div>
    > <script type="text/javascript">
    > // <![CDATA[
    > var fo = new FlashObject("fo_tester.swf", "fo_tester",
    "300", "150", 6,
    > "#336699");
    > fo.write("flashcontent");
    > // ]]>
    > </script>
    >
    > OKAY THIS IS WHAT I HAVE SHOWING ON MY WEB PAGE FOR THE
    FLASH <object>
    >
    > <div id="Layer6">
    > <object
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
    > codebase="
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
    > rsion=7,0,19,0" width="900" height="375">
    > <param name="movie"
    value="index_chiltons/chiltons_flash_index.swf" />
    > <param name="quality" value="high" />
    > <embed src="index_chiltons/chiltons_flash_index.swf"
    quality="high"
    > pluginspage="
    http://www.macromedia.com/go/getflashplayer"
    > type="application/x-shockwave-flash" width="900"
    height="375"></embed>
    > </object>
    > <script type="text/javascript"
    src="ieupdate.js"></script>
    > </div>
    >
    > Place your alternate content here? WHERE AND WHERE DO I
    Include a link to
    > <a
    > href="?detectflash=false">
    >
    > Any clarification would be a big help
    >
    > Gary
    >

  • What is the best workflow with SVN and Developer Data Modeler.

    I am workin on strategy to fullfill next tasks with Data Modeler:
    * Posibility to work on paralel branches for model
    * Merging changes from different branches
    * Generating upgrade scripts for changes (from one commit till other)
    * Maintaining posiblity to fast build empty database for any version of model
    What are your ideas?
    Do you use some database for thease operations or you do it only using Modeler?
    Does SVN merge works fine with Modeler?
    How you work with versioned Modeler and many versions of different development DBs.

    Hello,
    We work with SVN and DM too, but do not use branches for DM to prevent merges.
    If multiple developers work on the same design, each developer checks out the design. A lock can be used to prevent the update of the same object by multiple developers (if you want).
    If you commit changes in SVN, the other developers get informed on these changes by the 'Pending changes'. They can decide whether or not they include those changes.
    If you synchronize with the other developer changes, you can create alter or create scripts by importing the target database and generate scripts.
    If you want to build a historical version of the model, you check out a version of the design with a specific revision (you can specifiy this during checkout). You build create scripts based for this version.
    Joop

  • What's the Best Workflow to Add Footage to Existing H.264 files?

    I have some ready-made clips for the Internet already spec'd to H.264 at about 640x480. The audio is AAC. I would like to add bumpers to the beginning and end of these clips. Would you simply import them into FCP, make a 640x480 timeline add the bumpers, render and export? Or, is there a better way?
    I ran a test where I imported the H.264 file into FCP, added my bumpers and re-rendered. The results were not that bad however I'm getting interlacing issues when uploading to Vimeo. I tried using 'Progressive' in Compressor to rid of the of the lines but no luck. Then I took a look at the'De-Interlace' filter in FCP but it appears that the original H.264 file is what contains the lines and the filter doesn't remove them. Any ideas. Here's the result on Vimeo:
    http://vimeo.com/1893904
    In case you're wondering, I no longer have the original, 720x480, SD files. The 640x480, H.264 is all I have to work with.

    Open your main movie and its bumpers in QuickTime Player.
    Make sure the Timeline on your main movie is sitting at frame 1 then click your intro bumper to bring it to the front.
    Press cmd & A keys (select all). Press cmd & C keys (copy). Press Option, cmd and V keys (Add to Movie).
    Move the timeline of your main movie to the last frame then click your outro (is that a word?) bumper to bring it to the front.
    Press cmd & A keys (select all). Press cmd & C keys (copy). Press Option, cmd and V keys (Add to Movie).
    Save As... (makes a new file - better than overwriting the old version.)
    Quick and dirty, but it gets the job done.

  • Why jpeg file exported from Aperture with 300 dpi's it opens with 72 dpi's on PS ( image size)? I've tried several combinations and all give different results. And I am confused on what is the best workflow for me.

    Ok.
    My workflow is
    RAW > Aperture Library > export jpeg high resolution 300 dpi's > one file on PS > edit > Save us jpeg. The I realised that files from PS were being save in a smaller size from the ones exported form Aperture. That is when I went o see <image size> on PS and files were with 72.
    Since ten I've trying different things
    1. Aperture > export as PSD > open on PS > edit > Save us jpeg = small file (around 15 MB)
    2. Aperture > export as jpeg high resolution 300 dpi's > open on PS > CHANGE dpi's to 300 on <image size> edit > Save us jpeg = big file (Huge, actually)
    What am I doing wrong? Would someone give me guidance and tell me what is the best workflow, considering I edit photos to deliver to my clients and I shall give them 300 dpi's.
    Thank you

    This is a known Aperture issue: Problem with Aperture 3.6 preset exports. | Apple Support Communities
    Benjamin

  • What's the best workflow for Home Movie Importing and Enjoying?

    I'm new to iMovie (and the mac) and have started importing all my home movies from my camcorder into iMovie. I quickly realized that movies take a huge amount of disk space and it may or may not be reasonable to import all my movies and keep them on the hard disk in .dv format. At 12GB/Hour I would need 1.2 Terabytes of storage (plus backup). If that is the best workflow, i'm happy to invest in a few terabytes of storage and back up. But before I do that, I want to check to see if there is a different workflow I should follow given my use case.
    Here is my use case:
    I have 100 hours of 8mm and miniDV tapes already and plan to continue creating more.
    I want to import them all into the iMac for ease of organization, searching for the clips of interest, and watch them either on my iMAC and also on my TV (via TIVO).
    I may do some editing, but this is not a big priority for me at this time. I may do more editing in the distant future when I have more time. My editing for now will be limited to rejecting portions of clips I don't want.
    I plan to watch the movies from my iMac on my TV via my TIVO (i've already ordered the Roxio Toast software that I understand I need, per the Tivo web site).
    The final piece of my use case is back-up. I'd prefer to back up my movies on disk this way I maintain any editing i've done in case of a disk failure. Depending on what video format is recommended, this may bump me into a RAID multi-terabyte system as both working and automatic backup?
    Here are my questions:
    Should I maintain my event library in .dv format? (and bite the bullet on the storage)
    Or is the .dv format intended only for temporary editing and users are expected to compress into another format after editing? if so, what format and which tool is recommended? (keeping in mind that I want to view the clips via Tivo and Roxio/Toast).
    If I need to byte the bullet and invest in storage, my quick math suggests I'll need about 2 terabytes for the library and 2 more for back up for a total of 4 terabytes!?. Is a RAID system recommended for this? (I was surprised that the Apple store did not carry such a system, so perhaps that is not the best option). What would you recommend?
    Anyone out there with a similar use case? I know I've asked a lot of questions here. I'd appreciate any recommendations you may have, even if you cant answer all of them.
    Thank you.

    I am in a similar mode, though about half as much existing DV footage.
    +Should I maintain my event library in .dv format? (and bite the bullet on the storage)+
    Short answer, yes; long answer:
    I did "bite the bullet" since 1T drives are at or just over $100. I'm using a MacBook Pro so I bought an 2 port eSATA card for my cardbus slot ($34), and a 1T eSATA/Firewire/USB drive ($119). I don't plan to "back up" as I am not going to get rid of my Mini DV tapes/vhs/analog tapes, etc. Those will be in an off-site dark cool closet elsewhere. I don't want to do RAID or such as it still puts everything in the same drive unit, in the same location. Basically I'm splitting my video import to two different physical drives. So if lightning, thieves, personal incompetence or whatever strikes, there's more chance it'll only affect one of the drives. I've thought about a Drobo, which you might consider. It is unique device that offers a spin on RAID that offers some advantages.
    Everything I read here on these boards suggests that it is best to grab the source video in the original format whenever possible. Since storage is cheap, makes sense to me.
    It is likely you wouldn't compress your video unless you were going to edit it. For example if you wanted to make a video of the kids growing up to give the relatives you'd likely end up compressing to burn them a dvd. You would compress if you were going to use MobileMe, YouTube, etc. to post some footage. Whether you watch the video from home, or output to DVD for others, or post online, at least you'll have the source video in it's best possible original format to work with.
    This is an aside, but might be useful, I imported one tape at a time, let iM09 create a new event and split per each day. THen I renamed every event based on what the content was before doing the next tape. This really helps later on once yo realize you have a hard drive with 50 hours + of everything in your life on it. I included the year in the name in some way, for example, John's wedding 1994, Hawaii 2000, Hawaii 2004. Then I ended up drag/dropping Hawaii to one event.

  • What is the best workflow for Final Cut Pro X across multiple computers?

    I travel on a team that is in a different location every week, so all of our video editing has to be fairly moble. We have 3 macbook pros and would like to use final cut X on all of them. What would be the best workflow for us all to work on the same project and sync it across the computers? (eg, one of us editing the footage, one editing the sound, one working on visual effects?)

    My first question would be how well 5.1 would work with SL. People have reported problems.
    As far as cameras are concerned, I would guess most any tape-based camera would work and so much depends on the kind of projects you work on that I wouldn't want to start guessing at your needs.
    If you want broad access to tapeless and advanced formats try to locate and purchase an upgrade disk to 6 or 7.
    Good luck.
    Russ

  • What are the best sequence presets and settings to use in FCE for the best resolution with the least amount on strain on computer?

    Hello!
    Can someone please help me figure out the best settings to use in order to obtain the best resolution in FCE4 for a television show that is going to be sent out on full size Sony DVcam tapes, with 4:3 aspect ration and audio output at 48kHz? I am currently working with mixed media sources in Final Cut Express, and I am wondering what the best settings (presets and preferences) are, in order to provide the HIGHEST resolution possible, while putting the least amount of strain on my computer system?
    I am importing mini DV-standard definition footage and still photos (from Canon Rebel camera, HD CMOS Canon camcorder that records in 1440x1080 at 48 kHz, and cell phone photos). For voiceovers I use the tools in FCE.
    I use Voltaic (which I use thanks to recommendations from Apple discussion boards, love it!)  to convert the footage from the HD CMOS-Canon HD VIXIA (HG 20) camera, and then I am using print to video to output onto Sony DVcam tapes (full size). This is for delivery for a television network that broadcasts in Standard Definition, so I need to produce the highest resolution and best quality possible that also puts the least amount of stress on my computer system.
    If anyone has any recommendations, help, or sources that can help me answer this question I would be greatly appreciative.
    Thank you!
    Susan Kayne

    This is happening because your video clip properties do not match your sequence settings.  This is always a problem when you try to insert video from multiple camcorders/cameras (that use different video codecs, frame sizes & rates) in a single sequence. 
    It will help a lot if you provide more specifics - what FCE easy setup did you use to create your sequence?  For your DV footage, are you using standard 4:3 DV or anamorphic 16:9 DV clips?
    If you plan to export to standard def (DV/DVCAM) and are mixing DV from a miniDV camcorder, stills, cell phone images and AVCHD then I would suggest that you use the DV NTSC easy setup for your sequence.  Use MPEG Streamclip or similar utility to convert your non-DV video (your AVCHD video) to QuickTime/Apple DV-DVCPRO NTSC.   Then all your video will match your sequence settings.  Yes, you will have to crop the AVCHD footage to 4:3 and you can do that in MPEG Streamclip.

  • Whats the best blu-ray writer to use with final cut pro x

    Whats the best blu-ray writer to use with final cut pro x

    The Sea Tech Blu Ray Writer works great with my Mac.

  • When I'm done with my fcp sequence, whats the best way to get it to dvd?

    When I'm done with my fcp sequence, whats the best way to get it to dvd?

    The advice to go to Compressor left out the part that you may want to convert your audio to AC3 becaus ethe MPEG2 bitrate is probably too high for DVD specs.
    This method is in the DVDSP manual and it's in the Compressor manual, both difficult to locate, but easily searchable.
    Here's what I'd do: Export the timeline form FCP in the native sequence settings, self-contained. Bring that self-contained movie into DVDSP and let DVDSP handle the transcode.
    The advice to go to iDVD is even easier.
    bogiesan

  • Im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

    im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • What's the best way to transfer footage from a Sony miniDVD camcorder?

    What's the best way to transfer footage from a Sony miniDVD camcorder?

    Do not use "mini" DVD's in any slot loading DVD drive.
    Buy a cheap "tray loading" external DVD drive and attach it to your Mac.

  • What is the best way with c or cgi?

    Hi,
    what is the best way with C or CGI(with binary file)
    1. simple data transfer, from C or CGI application(without binary file) to XI for realtime sync?
    2. attached binary file transfer, from C or CGI appliction to XI
    for realtime sync?
    thanks
    venjamin.

    Hi venjamin,
    which adapter do you want to use? What kind of data do you want to send?
    I guess, if you only want to create a sync scenario with a application written in C or CGI, a soap webservice or a call of the http plain adapter would be the best way.
    Regards
    Philipp

  • My business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

    my business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

    MDM  -- moble device management 
    MDMs
    Airwatch, Meraki, MobileIron, Profile Manager on OS X Server, or Zenprise
    For a comparison see this page:
    http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
    Airwatch
      http://www.air-watch.com/
    Meraki -- A free MDM   [ expect lots of email and phone calls about upgrades ]
      http://www.meraki.com/products/systems-manager/
      https://discussions.apple.com/thread/4067210?tstart=0
      Good howto by Sergio Sosa.
      https://discussions.apple.com/thread/2594001?start=15&tstart=0
    MobileIron
      http://www.mobileiron.com/
    Profile Manager by Apple
    Zenprise
      http://www.zenprise.com/

  • What is the best compression for HD footage for online use?

    I have a sequence with the following specs:
    HD (960x720) (16:9), HD 960x720 aspect ratio, DVCPRO HD 720p60 compressor and need to output a 300x250 file for an online banner.
    Was wondering what you think the best looking compression would be for me to use plus whats the best way for me to keep the aspect ratio consistent within the new dimensions.
    Any help would be much appreciated! thanks!

    While a lot of people have Flash, not all of them have the latest version (or even the previous version). Newer versions of the Flash Player support better video codecs. I still encounter people (corporations) that are still only using Flash Player 7…

Maybe you are looking for