Whats the correct procedure to installing/updating Audigy 2

Hi all, I am terribly confused with all the updates.
Is this correct?
I install the drivers and software that came with my Audigy 2.
Then I go to Creative site and download all the updates? Or just some? if so, which ones and how do I know which ones I need and which ones I already have or do not need?
Also, how do I install the latest BETA openAL driver? Do I uninstall all Creative software or JUST the driver?
Thanks.

After your original cd has been installed and you have rebooted to your sound working correctly,install the older software updates (the ones before the August '05 ones).
Then install the Nov. '03 Driver using the downloaded setup.
After reboot, extract that driver setup with an extracting tool like Winzip or WinRar.
From the extracted driver folder, run CTZAPP.EXE and choose to overwrite previously installed and shared files.
Reboot twice.
Install the .84.55-R Driver setup.
You shouldn't need to run CTZAPP.EXE over itself this time as this file seems to have fixed the problem of the older releases where the driver files were not completely updated or reported as Microsoft signed in Device Manager. You may want to verify this in Windows Device Manager. Mine updated fine with this setup without needing the additional CTZAPP step. All driver files were the correct version and the "signed" designation icon's were all there.
Now, you may install all the other software updates from August, as well as the latest Audio Console software.
You don't need to install the latest beta driver unless you play newer OpenAL games. Those drivers break some aspects of the Creative software, although you can still control those broken parts of EAX Console through the new Audio Console.
If you want to install those beta's, read the instructions first and do what Creative instructs. I successfully applied everything I told you to do, but have no experience using those beta drivers to this point so can not help you there.

Similar Messages

The correct procedure to install PeopleTools 8.49

Dear Friends,
Hello. I am still not sure the correct procedure to install PeopleTools 8.49. I have done the following:
Step 1: Install Windows Server 2003
Step 2: Install MS SQL Server 2005
Step 3: Install BEA WebLogic 8.1
Step 4: Download 7 disks of PeopleTools 8.49 from Oracle e-delivery site
Step 5: Install PeopleTools 8.49 using setup.exe located in Disk 1.
Step 6: Setup PeopleSoft Database using C:\PeopleTools8.49\setup\PsMpDbInstall\setup.exe
Step 7: Install Tuxedo using C:\PeopleTools8.49\appserv\pstuxinstall.exe
Step 8: Install application server using C:\PeopleTools8.49\appserv\psadmin.exe
Step 9: Install PIA using C:\PeopleTools8.49\setup\PsMpPIAInstall\setup.exe
From Step 1 to Step 6, my system works correctly. But from Step 7 to Step 9, my system is not working correctly. Is the above procedure correct to install PeopleTools 8.49 in Windows Server 2003 ? Thanks.
Lucy

Nicolas,
Thanks a lot for replying to me. I have 3 questions as follows:
First, How many PeopleTools can be installed using 7 disks ?
As I indicated in previous discussed, I have done:
Step 4: Download 7 disks of PeopleTools 8.49 from Oracle e-delivery site and extract them.
Step 5: Install PeopleTools 8.49 using setup.exe located in Disk 1.
Step 6: Setup PeopleSoft Database using C:\PeopleTools8.49\setup\PsMpDbInstall\setup.exe
In step 5, setup.exe in Disk 1 load all of files in 7 Disks into C:\PeopleTools8.49\ and PsMpDbInstall install PeopleSoft Database successfully. I can log into Application Designer and develop my first application successfully in 2-tier mode.
Second, As you said in previous discussion, "Tuxedo is apart from PeopleSoft..." , do you mean I don't need to do Step 7: Install Tuxedo using C:\PeopleTools8.49\appserv\pstuxinstall.exe
Third, I don't understand how to install the rest of PeopleTools using the files in 7 Disks. Are they application Server and PIA ? Thus, we do:
Step 8: Install application server using C:\PeopleTools8.49\appserv\psadmin.exe
Step 9: Install PIA using C:\PeopleTools8.49\setup\PsMpPIAInstall\setup.exe
Lucy

What is the correct procedure to install a TCS application not included in the initial installation?

I can go through the installation procedure to the point when I've switched to the 2nd DVD. Setup resumes and a few seconds later states that no application was installed.
I'm adding Captivate to my initial installation of FM9, Acrobat9 and Photoshop. I'm not uninstalling them first. Should I? Why?
The initial installation was a year ago. The OS is Windows 7.
TIA
Douglas

On 06/01/2011 10:12 PM, Jeff_Coatsworth wrote:
So you already have TCS2 but didn't install the full suite the first time around? So now you just want to add Captivate? I believe in that case you just select it off the list. The installer skips all the ones that you haven't selected and only does the one you have. I think Captivate is on the 2nd DVD (at least it was on the TCS2.5 upgrade one I got), so you may have to start with that one first.
Yes, I just want to add Captivate. I've been successfully doing the canonical installation (DVD1 > setup (autoplay wouldn't work due according to the error message to a Unicode error in the lang.dat file) up to the switch to DVD2.
As far as starting from DVD2 is concerned, there's no setup file on it to launch. So that route is out.
Another option (because some have reported issues with installing from DVD) is to copy the contents of both DVDs to a temp folder on your hard drive and start the install from there.
Copying DVD2 to the HD might be a solution. Unless data is somehow corrupted on DVD2, but in that case, why did the original installation succeed?
Thanks again for your prompt answers.
Best regards,
Douglas

Update my app. What is the correct procedure for updating an app/folio?

I designed a folio in Indesign CS6 and created an app of the folio in adobe dps and succesfully uploaded it to the app store. Now I want to update my app. What is the correct procedure for updating an app/folio?

no, just update your content and recreate the Single Edition App. Your certificate should still be valid so there is not need to recreate these.
... your App ID absolutely need to be the exact same one you used for the first version if you want to make sure this is an update.

What is the correct procedure for upgrading to aperture 3.4

I am working in South Sudan and am shortly going to be in a place where I can download all the updates. The last time I did an update was around 2 weeks ago.
I presume that there will be updates for Mountain Lion, iPhoto and Aperture, plus a whole pile of iOS updates. From the support questions I see that there is a number of people having problems.
I presume that the first thing to do will be to rebuild the library of aperture.
What is the correct procedure after that?

If I do an upgrade through AppStore, and find it does not work, do I uninstall first by removing to trash? What do you mean by revert to an earlier version, and which previous version of Aperture should I use.
Neville,
So you did buy Aperture from the AppStore?
Then move the Aperture application to the Trash, but do not empty it, just in case
Sign into the AppStore and reinstall. In this case you do not need to revert to an earlier version. If the AppStore installer does not find an Aperture in your Applications folder, it will have to make a full install, and no incompatible frameworks should remain, as is the problem with the partial upgrades right now.
Yes, I have a bootable clone,
And have you checked, if you really can boot from your clone? Just being very cautious.
Do you use facebook? Some posters are having problems, even after reinstalling, if the want to publish to Facebook. Post back, if you encounter that problem.
Good Luck
Léonie

HT4623 Trying to install iOS 6 via itunes. Whats the proper procedure to follow?

Trying to install iOS 6 with iTunes, whats the proper procedure to follow?

Connect device to computer. Open iTunes. Select your iPhone under the Devices heading then click on the Summary tab in iTunes' main window. Click on the Update Software button.

What are the correct steps for installing SP1 over Sharepoint 2010

Hi,
I have SharePoint 2010 (Release To Manufacturing) environment and am planning to to upgrade it to SP1. May I please know the correct steps
to install SP1 on to my environment(2WFE + 2APP servers & 64 bit OS).

SP2 provides key updates and fixes across our servers, services and applications including security,
stability, and performance enhancements and provides better compatibility with Windows 8, Internet Explorer 10, Office 2013, and SharePoint 2013.
also your Sharepoint is upto date version, you will get all the functionality which
you will losing since you are prior to SP1.
i.e Site Recycle bin,
Content Deployment fixes, . you can go throw all the kB articles which will tell you what fixes in it.
http://blogs.technet.com/b/stefan_gossner/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

What is the correct procedure to connect and collect events from IPS through SDEE

What is the correct procedure to connect and collect events from IPS through SDEE?
We are a 3rd party application, that needs to collect and analyze the IPS events for a client.
Currently the approach we are following is
1) get a SubscriptionId using the URL below
https://IP_Of_IPS/cgi-bin/sdee-server?action=open&events=evIdsAlert&force=yes
This gets us a subscriptionId which is used in step 2
2) Collect events from the url below
https://IP_Of_IPS/cgi-bin/sdee-server?confirm=yes&action=get&subscriptionId=sub-sample&startTime=1362699903575432000
a few more notes here are
- starttime is current time in nanoseconds
the peculiar problem here is that, even though we specify todays date, SDEE returns us the events from mid Feb (today is march 7)
we did try a few combinations, but are out of ideas.
any help or direction would be appreciated

This is more an application issue than an IPS issue.
Have you compared your app against other apps [IME]?

What are the correct steps for installing Oracle Entitlement Server SSM?

Can somebody explain what are the correct steps to install OES SSM 10.1.4.3? I have installed OES admin 10.1.4.3 and applied the CP2 patch. it is allowing me to open Entitlement Administration, where I can define the policy.
Is it sufficient to have this Entitlement Admin to call the policy from BPM? Do I need a SSM ?
When I try to configure Java SSM using ConfigTool.bat -process myssm_config.properties I am getting the following error
Is Admin in the same BEA-HOME as SSM: [default: Yes]:
Give the location of the Admin: c:\bea\ales32-admin
Enter the identity directory name which will be used: [default: CoESSM_dir]:
Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
Checking if default ARME port is free: 8000
Generating policy files based on templates ...
Checking if SSM instance already present
Checking to see if SSM ARME port is free.
Checking JDBC parameters...
Checking to see if asipassword was run...
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

Yes I have explored this pdf...but it doesn't tell how to use the policy from the BPM. My question is if I want to use the policies from BPM, then do I need to install the SSM ?
If yes, what are the correct steps of installation ?
I am getting the errors while configuring the Java SSM.
Is Admin in the same BEA-HOME as SSM: [default: Yes]:
Give the location of the Admin: c:\bea\ales32-admin
Enter the identity directory name which will be used: [default: CoESSM_dir]:
Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
Checking if default ARME port is free: 8000
Generating policy files based on templates ...
Checking if SSM instance already present
Checking to see if SSM ARME port is free.
Checking JDBC parameters...
Checking to see if asipassword was run...
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

What's the correct order to install OEM Grid Control + DB + AS?

Hi everbody! I'm getting start on OracleAS and Grid Control.
What's the correct order to install:
* Enterprise Manager 10g Grid Control
* Database 10gR2
* Application Server 10gR3
(on RHEL4-Upd2)
or the order is not important?
I need have the environment for each oracle software ($ORACLE_HOME, $ORACLE_BASE)? Or install first one, and change the environment and install, change again and install, etc.. ? :)
Tks!

Hey Rafael! You only have to use the Grid Control CDS, AS, repository database and grid control software are installed automatically, so you dont have to worry about the order u should have to follow.
Anyways if u have already installed a database u can use that one as a repository.
about the enviorment variables i guess u´ll be prompted for just one only directory cause u only need to install the software only one time.
hope u find this interesting!!
Regards, Luis

On my i pad mini what is the correct procedure to LOCK our IPAD MINI for automatic i cloud back up ?

on my i pad mini what is the correct procedure to LOCK our IPAD MINI for automatic i cloud back up ? I am never sure the back up is working. It checked the owner manual but did not find what I need. Can someone give mt the step by step "how to" help so That I know everything is completely backed up to i cloud
thank you
olefuzz0115

Are you plugging in every night, locking the iPad and connected to WiFi? Are you meeting all three requirements?
Well that is what I do and it works for me because I can see the next day that the new backup shows in Settings>iCloud>Storage and Backup>Backup Now. If you look at my screenshot - you will see that I experimented to make sure that it would work. I responded on July 3 at 12:24 PM when you posted. Then I locked the iPad, plugged it in and waited for about 30 minutes before I unlocked the iPad to see if it backed up. The screenshot shows the backup was completed at 12:44 PM on July 3.
I also backup with iTunes and I almost never auto backup. I just initate the back up on my own. But the instructions that I posted are right from the settings. You can read it for yourself in the screenshot.
You do have to wait for at least 24 hours before the next backup will take place, but if you are getting a message that you haven't backed up a week later, I can't explain that.
Dont trust that message. Look and see what the date of the last backup was. That's the only way to know for sure.

VT01N: what is the correct procedure for creating shipment

Hi Gurus ,
Please tellme the correct procedure for creating shipment in VT01N with respect to the Sales order no . there are deliveries and ohter sceens what to do first .
Regards, Jaspal

Hi Jaspal,
Procedure for creating shipment sequence goes as:
<b>Shipping Processing and Analyses</b>
Shipping activities.
Deliveries.
Picking and confirmation.
Packing.
Goods issue.
Collective processing.
Shipment.
Billing.
Sales Information System.
Standard analyses.
Backorder processing.
Sales and distribution documents.
Functional analyses.
Planning.
Pls refer the link:
http://www.sap-img.com/sap-sd.htm for more details.
Regards,
Hemachandra K S

Whats the difference between a combo update and using software update?

I keep my Macbook up to date by checking regularly via software update, so far with no mishaps, but I have seen people on these forums mentioning that a it is better to download the combo updates direct from Apples website. Is this true, if so why, and what is the difference? I am thinking of installing Leopard which would then probably need updating to the current version, so what is the correct way of doing this?

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
More information on using Software Updater here:
http://support.apple.com/kb/HT1338
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

XFI Drivers - Whats the correct way

Considering that after I installed my XFI Extreme music card into my PC and installed the drivers from the CD played games, rebooted and it asks me to reinstall the drivers for the multimedia device.
What is the correct way to install drivers for these cards so that you can reboot your computer without it freaking out?
The only way i've been able to successfully keep the XFI installed is by doing these things in order.
Uninstalling the software
Uninstall the drivers via the CD uninstall tool
Cleaning the registry with aggressi've options (JV 6 power tools)
Using Driver Cleaner Pro and removing all creative audio and Creative audio lite files.
turning the machine off and moving the Sound blaster card to another PCI slot.
Turning back on and using the drivers off the CD.
If i use any other drivers, the Web update 2 or Beta 3, the card will not install.
this is on this system:
AMD Barton CPU 2500+
ASUS A7n8X-x motherboard 00 bios rev
WD800 80 GB hard dri've
Nvidia Geforce 6600 GT vid-card
GB IBM ram

Well this is a strange problem... So what you are essentially saying, is that Windows doen't keep the the records of your newly installed hardware... Or the hardware may be assigned to new resources after restart, which might cause the Installation to commence.
The 2nd can happen pretty often on an ACPI System, or if you change the "Plug and Play OS" section in your BIOS Setup. But even if this happens, Windows should have still kept the Installation Information in its registry, so it wouldn't bother you searching for the drivers.
So I believe it has to lie with your Windows installation...
What exactly do you mean with "the card will not install" with the newer drivers? Are you getting an error message?
Have you tried the?infamous manual installation? (Extract your downloaded drivers, then go to the \Drivers subfolder and execute Setup from there. Select the "...Creative shared files" option.)

Is this the correct procedure ?

Hi experts,
As per my knowledge i am following the following procedure for
extracting Inventory data.Please suggest me whether it is correct
or not:
1.Activate 2Lis_03_bx datasource in rsa5 and run intialization of
setup tables in the tcode MCNB and transport in
rsa6.Replicate datasource into bi system. Create transformations
between datasource and Infocube.Create Info package with
generate Initial status and load the data upto PSA.
Create DTP and set it to Delta With Get data by request and load
data to the info cube.Compress the request with No marker update
not set.( I unchecked the check box and compressed the request ).
the setting Get data by request.
2.Activate 2Lis_03_bf datasource in rsa5 & LBWE fill the setup
tables in the transaction oli1bw and transport in
rsa6.Replicate datasource into bi system. Create transformations
between datasource and DSO.Create Init of delta with data
transfer Info package and load the data upto PSA..
Create DTP and set it to Delta With Get data by request and load
data to the DSO. And then create DTP with Delta with get data by
request between DSO and infocube and load the data into the
same cube in which the 2lis_03_bx was loaded and Compress the
request with No marker update set. ( I checked the check box and
compressed the request ).
3.Activate 2Lis_03_um datasource in rsa5 & LBWE and fill the
setup tables in olizbw and transport
in rsa6.Replicate datasource into bi system. Create
transformations between datasource and DSO ( Same DSO in
which 2lis_03_bf was loaded ). Create Init of delta
with data transfer Info package and load the data upto PSA..
Create DTP and set it to Delta With Get data by request and load
data to the DSO. And then create DTP with Delta with get data by
request between DSO and infocube and load the data into the
same cube in which the 2lis_03_bx & 2lis_03_bf were loaded and
Compress the request with No marker update set. ( I checked the
check box and compressed the request ).
Can anyone please suggest me whether it is the correct procedure
or not and also suggest me what are the standard relevant cubes
and DSO's ( With keyfields ) which are used to load the data from
2lis_03_bx,2lis_03_bf, 2lis_03_um.
Full points will be assigned.
Thanks & Regards,
V N.

Dear VN,
the way you are extracting is correct and while loading to the cube and doing the compression especially for inventory please follow the steps as follows.
2lis_03_BX = Stock initialization, (first we have to do this and check no marker update and compress)
2lis_03_BF = Material Moments, (do the loadu2026and donu2019t do compression)
2lis_03_UM = Revaluations, (after this load also completed do compression on both the loads normally)
NOTE: if you want to see for which request the no marker update option is set and for which request the option is not used, go to the log file of each compression and if you see messages like REF POINT UPDATE then the marker was not updated in this compression.
Please assign points if it helps...
still you need any further calirify please let us know..
Thanks,
Ashok

Whats the correct procedure to installing/updating Audigy 2

Similar Messages

Maybe you are looking for