When attempting to use the spot healing brush in Lightroom 5 the visualisation section does not sho

dont seem to get this to show and yes i am using raw files

Hit the T key to get the toolbar to show up. The "Visualize Spots" feature works on all type of files, not just RAW.

Similar Messages

HT4111 I have an IPAD updated with iSO 7. Recently I purchased a logitech wireless keyboard and I went to pair the two up and the IPAD shows that the keyboard is paired or connected but when I type using the keyboard it does not transfer to the pad scene.

I have an IPAD updated with iSo 7. Recently I purchased a logitech wireless keyboard.
I went to pair the two up and the IPAD recognizes the keyboard and cites that it is connected.
But I proceed to type the words do not transfer to the screen.
Any suggestions? Techs at Best Buy state that the iSO 7 is not yet compatible with the keyboard manufacturers?
How long before they are?

The BestBuy guys are clueless. I use a Logitech BT Tablet keyboard with my iPad 4 - used it before with iOS 6 and use it now with iOS 7 and it works just fine.
A simply thing to try is to remove the BT pairing, reset your iPad (hold the on/off/sleep button and the home button at the same time until the Apple boot logo appears), then try repairing them. You may have to force the keyboard back into pairing mode (on mine, there is a button on the underside, near the on/off switch, that I would press and hold for second or two to force pairing mode).

Blue screen when attempting to use the dedicated video card

I keep getting a blue screen when attempting to use the dedicated video card.
I managed to install the AMD driver for it but without the other components like the Catalyst Control Center as it blue screened on startup when attempting to load the Catalyst Control Center.
The OS loads fine. Any applications that don't use the dedicated video card runs fine. All other drivers install fine as well.
Applications like games and Photoshop that switch to the dedicated video card on startup automatically crashes, the OS freezes then a blue screen appears.
What could be causing the problem? This problem just recently appeared. Two weeks ago.

boogs wrote:
I tried installing the drivers for my laptop from HP's support site. Still the same result.
This problem only appeared a few weeks ago. Before that, the same drivers from the HP site installed and functioned normally.
Could this be a problem with the graphics card itself?
Note sure but if we can know the system P/N others can look to see what drivers it has for the graphics to know what is there.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

I've a new account on iMac. When composing an email the contact list does not show up on the bar. WWhen I start keying in a name, it comes up with the address. How do I engage the contact list from the email?

I've a new account on iMac. When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email. When I start keying in a name in the email, it comes up with the person's address, which shows it is synced. How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

With the New Message window open, go to the View menu and select "Customize Toolbar...".
In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
That item should be then added to the Toolbar for the New Message window.
Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

Why when i buy books on my ipad, when i log onto the store it does not show that i have purchased them?

Why when i buy books on my ipad, when i log onto the store it does not show that i have purchased them?
how many books and songs were therefore lost when i had to wipe my ipad?
this is SHOCKING from Apple... this is not in my domain of settings!!!

In the iBooks application on the Mac, there is a checkbox to sync highlights and notes across devices.
I don't see a similar setting in the iBooks app on my iPad. It may require iBooks on the Mac as a mediator.
Also:
Can I highlight text and make notes?
Yes, iBooks includes built-in Highlight and Note features. Highlight any word or passage of text within a book. You can also create a Note from your highlighted selection. Review your Highlights and Notes by tapping the Table of Contents button and then tapping Bookmarks. Highlights and Notes appear in their own section under Bookmarks.

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up during start-up and stays there for ten minutes. Then, the ipad will start up properly.

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD It does not shoe in p[layback on the computer. I understand there isd some file I need to delete and reboot the imovie to co

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD. The digital breakup does not show in playback on the computer. I understand there is a file I need to delete and reboot the computer and imovie will rebuild the file in the program. Help!

My method is to use the DAW in standard recording mode, and set up the camcorder entirely separately. After recording, I automate the audio mix with fader moves and effects, then export ("bounce to disk") a full-fidelity AIFF, 16-bit 48 kHz stereo file (most videos use 48, not 44.1). I use iMovie '11 to import the video from the camera, then import the stereo audio file and match it up to the camera audio by dragging it into the iMovie Project. Make the waveforms visible, it's not too hard to align.
Then, use iMovie's "Export as Quicktime" feature. Here, by going through the menus and options, you can control the audio compression (for example, 256k instead of 128, although 128 seems to be enough for YouTube).
AppleMan1958 posted a YouTube video about controlling iMovie's export options that may help:
http://www.youtube.com/watch?feature=player_embedded&v=vJg-909lx2s#!

When save as pdf, the dialog windows does not open. What is wrong?

Working in illustrator, when saving time choose save as and click pdf, what is expect is, "the dialog box that enable me to choose the quailty in pdf" but it (the dialog box) does not appeared today. It still works yesterday. What went wrong? Please help.

Your Mail is not gone. The problem you are having following the upgrade to Leopard (10.5.6) from Tiger, is probably what has been covered by the support document at the link below:
http://support.apple.com/kb/TS2537
If you also find any files named to include MessageSorting (which would mean you once have upgraded from a version of OSX earlier than 10.4), remove those, also, but never restore those.
To find the correct location for the Mail folder, open a Finder window, click on the icon of a house in the Sidebar (this is known often as "Home"), click on Library in that Home user directory, and then to open the Mail folder found there.
Ernie

I installed 4.0 version but when I click on the icon it does not pull up the web page?

I deleted the older version of foxfire and install the 4.0 version. When I double click on the program it does not engage the web page.

ErinGillaim wrote:
The audio format or the codec may not be recognized by the iTunes
It is else it would not have been able to be selected to import.
The simple fact that it shows up in iTunes Search means it is in the iTune library.
It is a bug where some imports do not show up in the iTunes library (but they usually show up in Recently Imported playlist) until a restart of iTunes, which usually fixes it.

When trying to Forward, the addresses column does not appear

When trying to 'forward' a message, the 'addressees' column does not appear and I cannot select recipients. This suddenly happened a short time ago and I can't figue out why.

When you have a Write window open you toggle the Contact Sidebar on and off with the F9 key.

When downloading uptodate software the icloud icon does not appear

trying to setup icloud on imac. i already have it on macbook and iphone. when load up to date software the icloud icon does not appear in setting.

Open System Preference>View> add it to the list or customize

Getting file... does not exit error msg when attempting to use the setXSLT method

I am attempting to use a PL/SQL procedure to generate HTML by using the DBMS_XMLQuery.setXSLT and DBMS_XMLQuery.getXML methods. When running the procedure, the following line
DBMS_XMLQuery.SETXSLT(xsuQry, 'hmwebserver/Series47/Modules/Results_View/hmRVTemplateStyle.xsl');
throws an ORA-29532 error with the message '... File... .xsl does not exit'. What does this actually mean, and more importantly, what can I do to correct the issue?
Thanks in advance for any help.

Hi
In the dimension/Measure definition, you can select the table. Find the below screenshot.
If you still getting the issue…Can you please share your screenshot, for better understanding the issue?

I installed Acrobat X Pro on a Windows 7 Laptop. I get error 1602 when attempting to update the product. Does anyone have any suggestions to fix it?

I installed Acrobat X Pro on a Windows 7 laptop and get error code 1602 when attempting to update it. I have tried the Repair Acrobat installation function in the help menu.

Hey fdciii,
Please try renaming the ARM folder at this location:
C:\ProgramData\Adobe\ARM
Now try updating Acrobat from the Help menu.
You can also try installing updates from the following link:
http://www.adobe.com/downloads/updates.html
Regards,
Anubha

I downloaded Firefox but when I try ro use the site it does not do anything, just ask the question, do you want to restore the last session, what do you suggest I try?

I have repeated the download trying to solve the problem but I get the same results. I used to have Firefox and used it all the time, I do not know how I lost it, but one day the browser just quit. The bookark, favorite works just not the browser.

On the second issue, please see this thread on how to determine the cause of the JavaScript error: [https://support.mozilla.org/en-US/questions/729606 Javascript pop errors stating: TypeError: Components.classes[cid] is undefined | Firefox Support Forum | Firefox Help]
On the first issue, I haven't associated single letters with sites, so I'm not sure how that feature works. I usually type a few letters then arrow down or click on the one I want.

Multiple operation using the same port does not work

I am trying to have multiple operations on both ports
here is my wsdl snapshot
     <portType name="CommonAlerter">
          <operation name="initiate">
               <input message="client:CommonAlerterRequestInitMessage"/>
          </operation>
          <operation name="StartWait">
               <input message="client:CommonAlerterRequestInitMessage2"/>
          </operation>
          <operation name="StopWait">
               <input message="client:CommonAlerterRequestInitMessage3"/>
          </operation>
     </portType>
     <portType name="CommonAlerterCallback">
          <operation name="onResult">
               <input message="client:CommonAlerterResponseMessage"/>
          </operation>
     </portType>
I just added two new methods "StartWait" and "StopWait" to the default async. template that got generated when I created a new BPEL Project "CommonAlerter"
Now I call this BPEL process from another BPEL project
The three methods I call "initiate", "StartWait" and finally "StopWait" are at different stages in my calling BPEL processes. Although "initiate" gets called first.
When I debug the calling process instance I get an error on the call to "StopWait" which gets called after "StartWait".
Here is the error message
Exception not handled by the Collaxa Cube system.
An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "ORABPEL-08010
Failed get operation definition.
Failed to get the WSDL operation definition of "StopWait" in portType "{http://xmlns.oracle.com/CommonAlerter}CommonAlerter".
Please verify that operation "StopWait" is defined in portType "{http://xmlns.oracle.com/CommonAlerter}CommonAlerter".
Now I do have this method in my WSDL
Can some one help.
My Message part XSD is
     <element name="CommonAlerterProcessInitRequest">
          <complexType>
               <sequence>
                    <element name="initializeparam" type="string"/>
               </sequence>
          </complexType>
     </element>
     <element name="CommonAlerterProcessResponse">
          <complexType>
               <sequence>
                    <element name="result" type="string"/>
               </sequence>
          </complexType>
     </element>
     <element name="CommonAlerterProcessRequest2">
          <complexType>
               <sequence>
                    <element name="waittime" type="duration"/>
               </sequence>
          </complexType>
     </element>
     <element name="CommonAlerterProcessRequest3">
          <complexType>
               <sequence>
                    <element name="stopargument1" type="string"/>
<element name="stopargument2" type="string"/>
               </sequence>
          </complexType>
     </element>

Here are the steps for multi operation synchronous BPEL process :
1.     Create a new BPEL process and delete request and response activities.
2.     Now add the porttype/operation in the BPEL process wsdl.
3.     Start the Process with a Pick activity and click on Create Instance checkbox. Remove the onAlarm branch as we do not need this. In the onMessage branch specify the name of the operation.
4. Now add onMessage branches to match the number of operations. The flow for each onMessage branch is different. Just make sure that you create a reply activity at the end with the correct operation chosen. So you might end up having multiple return activities.
Sometimes, a wsdl with multiple operations might not work as expected if the process version is 1.0. So try changing the process version in case you are not getting the expected results.
Hitesh

When attempting to use the spot healing brush in Lightroom 5 the visualisation section does not sho

Similar Messages

Maybe you are looking for