WHEN AVID MBOX 3 PROTOOLS EXPRESS GO WORK WITH MAVERICKS OR YOSEMITE ???
WHEN AVID MBOX 3 PROTOOLS EXPRESS GO WORK WITH MAVERICKS OR YOSEMITE ???
PLEASE HELP US AND SHOW ONE RESOLUTION.
Apple wouldn't know Avid's development cycle.
And for that matter, neither would us users.
You'd have to ask Avid when they are going to fix it.
Similar Messages
-
I installed Porsche's 911 Screensaver on my 2011 MBP when it had Mountain Lion. It still works after upgrades up to Yosemite. I attempted to install the same on my late 2013 MBP Retina (Mavericks and Yosemite) and though it installs, I get the message that the screensaver isn't compatible with this version of OS X. How can a piece of software work on one MBP and not another? The 2011 is 15", quad-core i7 and the 2013 is about as powerful but 13" and all SSD. This is confusing
Thanks for the helpso return it for another one if its within the 14 day return policy. If not, bring it in for repair.
-
When EOS Utilities will be able to work with Mavericks
I´ll try to open EOS utilities for CANON but itsays " Cannot be used with this version" , can you guys help me?
Milapoly wrote:
Where I can get any answers when it will work?
Unfortunately it's not possible to get such answers. You just have to wait until Apple announces an update. -
I downloaded and installed Airport Express Utility 5.6 to get my old Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility. What's up?
It is likely that you downloaded AirPort Utility 5.6.1. If you checked the requirements, this only runs on Leopard or Snow Leopard Macs.
You have Lion, so you need AirPort Utility 5.6 for Mac OS X Lion -
Can't Get Airport Express To Work With ATT's Uverse
For years, AE worked just fine with my 2Wire portal streaming music to my stereo. Went to Uverse 2 months ago, and AE quit working. I am not using an Airport base station, just the Uverse modem and I need help getting it to work.
There is nothing in this forum when I search for uverse, so I post this in hope someone can help me.
I reset AE it and it finally appeared in Airport utility with a yellow light. I click configure and when I choose to join my current network, it sets up it's own Apple network, removing it from Airport utility and changing Airport status in Network to yellow.
No matter what I do or how I try, I just can't get AE to work with the stock 2Wire modem.
Has anyone been able to get AE to work with just the 2wire router & not have to buy an airport base station.
Any help is REALLY appreciated, as I wanna hear my Christmas music, and it's turning me into a Grinch!
Thanks!
Message was edited by: Chris Winkler1+However, it asks for the security and all I see is WEP in the Home Network set up, I don't know if it's 40 or 128+
AT&T set this up, so only they can tell you for sure. My guess would be WEP 128 since this type of security is stronger than WEP 40.
+And it asks for a wireless password. I entered the one from the router & it did not work. Tried the Key and it did not work.+
This is the same wireless password that you would use if you were logging on to your wireless network with your computer. But, unless you first have the exact, correct security setting for your 2wire router, the password will not work.
+Has anyone out there successfully got their Airport Express to work with Uverse????+
I don't provide instructions to anyone on the forum unless I've first done it myself. I'm providing you with the same instructions that I used to help a neighbor with his 2wire Uverse setup last week. It works fine.
But, he called AT&T to ask them what security setting they used on his 2wire router. Otherwise, we would have had to try each possible setting to see if we could make it work.
AT&T also told him that his password should be 13 characters, all lower case letters with no spaces. That is what the neighbor said he used. I cannot confirm this as he did not share his password with me.
AT&T may have set up the password criteria differently on your router. You need to confirm with them on this.
+What password goes in the Base station tab, Key or Password?+
Any password you want. This is a separate password simply to be able to access the settings on the device in the future when you are using AirPort Utility. You could use your wireless network password if you want.
Please post back on your progress. -
Airport express not working with apple products
We have been trying to get airport express to work with a macbook pro, ipad2, iphone, laptop, htc wildfire - havent even tried the air music or printer yet!
We have a green light on the airport express which is connected to an ntl cable modem(virgin media network).
Currently the only thing that will connecy is the laptop and my htc phone. All the apple products will not connect?
We went to the apple store today and it worked grand when it was plugged in - the apple products all worked.
The network comes up on ipad2 but when you press connect it says 'unable to connect'
can anyone help us please?
thank youI have the same issue. Mine fixed itself for a bit and now it's broken again. I'm thinking it's going to be intermittently broken. I've tried turning both devices off and on again but that did not help.
-
Airport Express not working with HughsNet
After ditching Comcast and signing up with HughsNet and Dirct TV, our Internet Access is very intermittent. We are requested to 'restart the device' when we access internet with both of our Macs at the same time. Only one or the other Macs works at any one time.
Hello!
Have you set up your Express to work with your new modem? See here: https://www.apple.com/airport-express/#setup -
ESATA express card does not work with Mavericks. Any suggestions?
This is an Apiotek II 300 Express Adapter. I went out to Apiotek.com and it appears the domain is for sale. Is there any way to get a software update or do I have to buy a new Express Card that allows eSATA drives to work with Mavericks. I did a backup before I upgraded using X 10.7.5 and everything worked fine. The eSATA drive is not seen using Disk Utility either.
Thanks for any help or suggestions.The driver has to come from the manufacturer of the card, so your two options are to get another card or to use your full backup to go back to 10.7.5. That assumes it's a clone backup and not Time Machine.
-
Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..
A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
Regards. -
I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?
The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step. -
I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?
Hello Hornet12,
Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
Using AirPlay
http://support.apple.com/kb/HT4437
AirPlay requirements and capabilities
To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
Stream content from
Requirement
Notes
iPad
iOS 4.3 or later.1
From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
iPhone (3GS or later)
iPod touch
(2nd generation or later)
Computer
iTunes 10.2 or later.
Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
Apple TV
Apple TV software version 5.1 or later.
Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
Cheers,
Allen -
Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time
Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?
My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks -
help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete
According to Roaring Apps, there is a version of Protools compatible with Lion. But you may need Snow Leopard 10.6.8 to buy either Lion or ML on MAS. It looks like you need to get up-to-date with your OS and the apps too.
http://roaringapps.com/apps:table/tags/_t/index_tags/_t/p/2
http://roaringapps.com/apps:table/tags/_p/index_tags/_p/p/3 -
I am currently using the Airport Express to work with a Bose Wave radio. 3.5 MM jack out of the Express and phono connectors into Bose. Is there a way to hook to a new Bose Wave which does not have phono input plugs?
The latest Bose Wave SoundTouch music system still uses a single 3.5 mm analog Aux port. You would connect the two using an analog audio cable with 3.5 mm stereo jacks on either end.
An example cable would be located here. -
After downloading Maverick on the MacBook Pro that I bought in 2011, I am unable to open iPhoto. The message says "You can't use this version of the application "iPhoto" with this version of OS X. You have "iPhoto" 9.2.3" What??? That is ridiculous. Why doesn't Maverick download everything? I've tried the "fixes" I found on this forum, but none of them work for me, because there is no workaround via the library. I can't access the library.
I have an old iPhoto version and it still works with Mavericks, the version before yours, that is puzzling.
Maybe you are looking for
-
How to capture PLSQL package error and show the same in OAF Page.?
Hi all, I am having the requirement to capture the error from a PL/SQL package and show the error in OAF page with meaning full error. Assume i am having the create and review page. The create page having the employeeLOV input field (non mandatory fi
-
Bought dock adapter for classic 160GB and it doesn't fit
Came in 3 pack, but all three are completely identical and all of them are too big. Product number ma126g/a. What do I do?
-
How do you use the "copy style" clipboard and "paste style" glue bottle?
I just know that it will seem obvious when somebody tells me, but I'm having no luck finding out how to use these tools. I keep thinking/hoping that they will work like a formatting paintbrush (in microsoft word or google docs) but that's not the ca
-
Brtool getting failed after kernel upgrade
Dear Guru's After doing kernel upgrade i tried to schedule check database from db13 and am getting this error Please can any one guide me in resolving this issue Job started Step 001 started (program RSDBAJOB, variant &0000000000079, user ID BASIS) E
-
I currently have an ipad and would like to exchange it for an ipad 2. Is this possible?
Does anyone know how to make this work? Would the apple store honor this exchange??