When booting on alt, only my external HD (ccc backup) shows on screen. I can't select my windows partition nor my OSX partition. But when booting normally osx boots perfectly.

when booting on alt, only my external HD (ccc backup) shows on screen. I can't select my windows partition nor my OSX partition. But when booting normally osx boots perfectly.
In osx, all three partitions show when i go to preferences-... (osx is selected as default boot disk)
i don't dare to select windows as osx doesn't show on boot with alt
thanks for your help.
eric

Try a PRAM reset:
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Similar Messages

HT3275 I am using an external drive for backup. I am now getting a message that the drive needs a disk repair, but when I run disk repair it just seems to freeze.

I am using an external drive for back up. Yesterday the backup failed and I received a message that the external drive( a passport drive) needed a 'disk repair", when I ran disk repair nothing happened it seemed to freeze. Suggestions? should i simply erase the external drive and start over-my computer is fine.

Get a different drive for backup.
In the meantime, once you are backed up some drive safe, then you can attempt to repair the backup drive using the repair the directory link.

HT204053 I use my sisters iTunes to sync only music onto my phone. I have my own apple ID and have it set up in my settings but when there's an update to be done, my sisters apple ID appears and I can't change it. Any ideas?

I use my sisters iTunes to sync only music onto my phone. I have my own apple ID and have it set up in my settings but when there's an update to be done, my sisters apple ID appears and I can't change it. Any ideas?

You may have inadvertently synced an app to your phone that was purchased with her ID. That would trigger a prompt for her ID password when updating. If that's the case, you would need to delete it from your phone.

When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. pleas

When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. please re install of repair the application and try again. I have done this and it's still not working

anomaly jade,
You only need to use the serial number during installation.
Have you, at least seemingly, been able to install, and then you are unable to start up?
If that is the case, you could try to reinstall using the full three step way:
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

In System Prefereneces, when I am in Desktop and Screen Saver, I am unable to remove folders. I can click the "-" and the folder appears to be gone, but when I close and then reopen System Preferences, and open Desktop and Screen Saver, the folder reappea

In System Prefereneces, when I am in Desktop and Screen Saver, I am unable to remove folders. I can click the "-" and the folder appears to be gone, but when I close and then reopen System Preferences, and open Desktop and Screen Saver, the folder reappears in the list. I have tried deleting preferences "plist" but I am totally unable to remove the folders.

I've seen one other report like yours, and I think the issue is caused by a bug, but I don't know what triggers it.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?

My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?

Try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, try restoring on another computer.

When i go to new sms typing their is always show a text, how can solve this problem?

when i go to new sms typing their is always show a text, how can solve this problem?

Delete them and then download them from the desired Apple ID. This may require repurchasing paid applications.
(95675)

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

If you right mouse and select Get info it will show you the Apple ID used to purchase these songs.
Usually the name of an apple id is based on the email. So knowing that you may have forgotten the Apple ID password.
You can request a new password here http://www.apple.com/support/appleid/

Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes. I have downloaded new Extension Manager for CS5. and still c

Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes. I have downloaded new Extension Manager for CS5. and still crashes. Anybody else experience this? email:[email protected]

Hi bigd_bud,
Can you see if the solutions in this post help?
Re: Adobe Extension Manager crashes on mac 10.8
Thanks,
Preran

I have Windows XP / bootcamp and can connect to the internet via Wi Fi (Apple Express) but when I try to open Int. Explorer I get a message "cannot connect". I checked to make sure IE is not off line. Any suggestions please?

I have Windows XP / bootcamp and can connect to the internet via Wi Fi (Apple Express) but when I try to open Int. Explorer I get a message "cannot connect" yet my computer is connected with a strong signal. I checked to make sure IE is not off line. Any suggestions please?

Try using a different browser as a test.

I can sign on to the iTunes store using my ID but when I want to check my billing information (to change the existing info) it wont accept my password? What do I do?

I can sign on to the iTunes store using my ID but when I want to check my billing information (to change the existing info) it wont accept my password? What do I do?

Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296

HT201210 iPhone 4s will not turn on, a screen shows up telling me to connect to iTunes to restore and update to iOs7, but when I try to restore error 2001 comes up and will not let me restore. I still cannot turn my phone on. None of the troubleshooting t

iPhone 4s will not turn on, a screen shows up telling me to connect to iTunes to restore and update to iOs7, but when I try to restore error 2001 comes up and will not let me restore. I still cannot turn my phone on. None of the troubleshooting tips work, help??

Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process.
FollowTroubleshooting security software issues to resolve this issue.
In rare cases, these errors may be a hardware issue.
If the errors persist on another computer, the device may need service.

Why when i try to open youtube videos on facebook they don't work, I receieve a message (an error occurred, please try again later) but when i open the videos at youtube they works ???

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/791508]''
why when i try to open youtube videos on facebook they don't work, I receieve a message (an error occurred, please try again later) but when i open the videos at youtube they works ???

Can you open up your Real Player and tell me what version you have? I think Real Player 15.0.6 is supposed to fix this problem. There was a conflict between Real Player and Flash this whole summer that broke Flash videos. Real Player released a update that might help in your case.
If that doesn't help, I think a addon might be to blame here. So do this:
<br> '''Firefox button <img src=https://support.mozilla.org/media/uploads/images/2012-03-27-09-22-48-1204f1.png> > Help > Troubleshooting Information'''
<br> (or '''Tools > Help > Troubleshooting Information''')
Then click the "Copy all to clipboard" button then paste it here. It will tell us what addons you have installed and I can see which one might be causing problems.

HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

Why select data from Function directly (SE37) got data , but when use funct

why select data from Function directly (SE37) got data , but when use function in program donot found data
i use function
CS_BOM_EXPL_MAT_V2
when i run function directly at SE37 .
i found data.
but when i use same function in program .
system not found.
please see my attachment.
help me please.
[http://www.quickfilepost.com/download.do?get=c974356a498b3a4d369aa0c50622e50b]
http://www.quickfilepost.com/download.do?get=c974356a498b3a4d369aa0c50622e50b

I know why U get empty data.
In Program U should follow the rules:
U'd better data a variant typed the function parameters's type.
for example:
in your program the parameter: stlal = '1'
U'd better like follow:
Data l_stlal type STKO-STLAL
l_stlal = '01'. *Attention: '1' <> '01'.
stlal = l_stlal.
in this way U may have less mistake
and the parameter MTNRV
U should use material convernt : "CONVERSION_EXIT_MATN1_INPUT" to change material into internal types before U put into function's parameter.
why se37 has no problem? because In se37, the data you filled was be processed before use

When booting on alt, only my external HD (ccc backup) shows on screen. I can't select my windows partition nor my OSX partition. But when booting normally osx boots perfectly.

Similar Messages

Maybe you are looking for