When calling my mobile number, it makes the 'no such number' tone?!

My phone (iPhone 5s) currently states 'No Service'. I've turned it off, turned it on, put it in airplane mode, taken it out, but still got 'no service'. I currently have a wifi connection, but no wifi-calling. Have tried calling 151 just to 'test' it, nothing. Have now called my mobile from a landline, but just get a 'no such number' tone, whereas I should be re-directed to the voicemail... I am on a EE Sim only contract, with a contract end date of 13/09/14, but that I haven't cancelled. Money has just been debited from my account for July, so I assume this would cover me until 13/08/15. Anyone have any ideas of what's going on?! Everyone else in the office on EE has a signal, and I don't think it's the signal that's the problem, or the phone would just go straight to voicemail instead of a constant 'no such number' tone...

Hi ,
Thanks for joining the Community.
Please get in touch with customer service so we can help.
Click here for contact details.
Thanks
James

Similar Messages

Why won't my Razr Maxx ring when called from my home phone or the other cell phone (I-phone) on my Verizon account?

Why won't my Razr Maxx ring when called from my home phone or the other cell phone (I-phone) on my Verizon account?

Hi Ruth:
Thanks for reaching out to me about this issue.
This has been happening since I got the phone a couple of years ago.
I did not realize that my home land line and my wife's cell phone
always go straight to voice mail until my wife pointed it out to me
several months ago. Is there a setting I can adjust?
Yes, I can make calls to our home land line and to her cell phone
without being diverted to voice mail.
Any advice you might have would be most welcome.
Thanks.
Greg Bostwick
On 12/22/14, Verizon Wireless Customer Support

FaceTime freezes when same room has no problems. The picture is high resolution. There are no freezes when calling my daughter's iPad but the picture is lower resolution. Can I troubleshoot this?

FaceTime freezes when I call my son's iPad. Calling his iPhone in the same room has no problems. The picture is high resolution. There are no freezes when calling my daughter's iPad but the picture is lower resolution. Can I troubleshoot this?

Thanks Mario, but I tried everything there before posting my question. I may not have been clear in my question since I accidently recorded the whole question as the title and tried to edit. In brief: I have no trouble connecting with my daughter's iPad or my son's iPhone. However, his iPad is sending much higher resolution pictures and we disconnect after about a minute. Oddly, he can hear and see me while my screen first freezes, then goes black and gives me a message of "reconnecting" until it quits trying and shows the buttons to end or redial. The picture quality difference is what is leading me to believe it is bandwidth related. However, I get anywhere from 5 to 10 MB download speeds; usually closer to 10. Last summer, I had 4 granddaughters on their iPads, a grandson on his gaming device and me on cell phone or pc, all using the bandwidth at once with no complaints. If there is a way to lower his outgoing resolution, I think that would help.

Every Shipping point has corresponding number range for the HU box number?

Hi,
Every Shipping point has corresponding number range for the HU box number assignment?
For example, we are doing packing, then a Handling Unit number has been generated. So where to define this number range of the HU number??
Is it from the SPRO or controled by programs.
Thanks.

Hi,
Please find good stuff on Handling Units Below:
HANDLING UNITS CONFIGURATION:
A Step by Step Guide to the SAP Handling Unit Management Configurations
The SAP Handling Unit Management system allows you to manage the entire movement of the handling units and the materials they contain rather than tracking each material individually.
This paper is for the HUM Delivery although some of the contents is related to Inventory under the Logistics General modules.
Table of Contents
Objective
IMG Menu The Starting Point
Handling Unit Management Overview
Start of HUM Outbound Deliveries Manual Packing Configuration
Define Number Ranges for Handling Units
Define Packaging Material Types
Define Material Group for Packaging Materials
Define Allowed Packaging Materials
Use Handling Unit Supplements
Maintain Goods Movements for Handling Unit Stock-Posting
Define User Status Profile
Set QM Check and Delivery Type for Each Movement Type
HU Requirement for Storage Locations and Default Values for Deliveries
Packing Control By Item Category
Define Requirements for Packing in the Delivery
Delivery Type Determination
Set Unique Number Assignment for HU Identification
Number Range Maintenance for HU Identification
Define Number Assignment for Each Packaging Material Type
Delivery Output type for Packing List
Maintain the Delivery Output Determination Procedure
What else to maintain after the Manual Handling Units Configurations?
Start of the Automatic Packaging Configuration
Define Number Ranges for Packing Instructions
Define Determination Type for Packing Instructions
Define Number Ranges for Packing Instruction Determination Records
What else to maintain after the necessary Automatic Packaging Configurations?
Appendix A: How to do Manual Packing for Non-Assigned Handlings Units?
Appendix B: Scenario 1 How to do Manual Packing by Delivery Item?
Appendix C: Scenario 2 How to Manual Pack the Materials into Pallets?
Appendix D: How to do Automatic Packing?
Appendix E: How to do Goods Movement for Handling Unit Material?
Appendix F: How to Unpack the Handling Unit Material?
A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
Handling units can be nested, meaning that you can also create new handling units from several handling units as often as you like.
Handling units have unique, scannable identification numbers that can be formed according to standards such as EAN 128 or SSCC.
Figure 1: Handling unit example
Structure
The handling unit object contains the following attributes:
     Identification number
     Dimensions
     Weight
     Volume
     Status
     Materials and quantities
     Packaging materials
     Packing instructions
A handling unit consists of a handling unit header and handling unit items. For identification purposes, it is given a unique number.
Handling unit header
The header data of a handling unit is divided in the following way:
     Weight/Volume/Dimensions
     General data
     Means-of-transport data
     Additional data
     Output determination procedure
For more information about each of these detailed points, see Editing detailed data for handling units.
Status
The handling unit is linked to general status management. In this way, the various physical states (planned or implemented) and other attributes (weighed, loaded, blocked or posted goods issue) of handling units can be documented.
You can use the HU_ST_INIT user parameter when you create handling units without object reference to set which initial status the handling unit is to have when it is created.
If you want to implement a status of your own, you can define a user-specific procedure for the packaging material type (see also Define Packaging Material Types).
Handling unit item
The items of a handling unit can consist of material items, packaging materials or other handling units that appear in an overview. For more information about this overview, see the Contents section of Editing detailed data for handling units.
To access the item data of an individual handling unit, select the handling unit concerned and choose Goto  Detailed HU data  Contents.
Integration
Handling units can be used in all processes within the supply chain.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Make the Skype phone number that I purchased appea...

The only option I have is to have my mobile phone number appear EVEN THOUGH I purchased a regular Skype phone number. How can you make this phone number appear?
Thanks so much in advance

MADinS wrote:
The only option I have is to have my mobile phone number appear EVEN THOUGH I purchased a regular Skype phone number. How can you make this phone number appear?
Thanks so much in advance
Not all of Skype's Online Numbers can be used as Caller ID, appearing on the displays of phones you call from Skype. Online Numbers from a few countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US) can be used this way, where the others are not permitted to be used in this way. If your Online Number is not from one of the countries I listed above, then the only option would be to use the two-step verification process so that a mobile number (or a landline number that can receive SMS messages) is your Caller ID number when calling from Skype.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

How to cause them to associate my Case Number 185689167 with the real phone number I need to be called at:

I purchased a one year subscription to Acrobat Pro, and after installation on my MacBook, in the LaunchPad (aside from the normal Adobe Acrobat Pro, Acrobat Distiller, and Forms Central for Acrobat) a folder containing two icons. The first was (I forgot the name) and the second entitled AAMLauncherUtil. Shortly after installation I ran the AAMLauncher Util, and it downloaded and "updated" Acrobat Pro and installed Creative Cloud. I was told by some person in Tech Support that I didn't need these two additional icons in LaunchPad, and I could just drag them to the trash.
The folder would not go in the Trash, so I dragged them out of the folder and then the one whose name I don't remember was able to go to the Trash, but not the AAMLauncherUtil icon.
I called Tech Support again, and got a technician whose name I will withhold, but although he tried to solve the problem, basically he was clueless and I could hear him asking other people in the background what to do and they were giving him suggestions, mucking around my library and deleting anything that sounded like it was associated with AAMLaucher, and in the end all he succeeded in doing was making my Creative Cloud not work anymore and produce messages that it was corrupted and had to be removed and reinstalled. Finally he gave up and said that he was referring my Case 185689167 to the next level higher of tech support, who would call me within 24 hours. Of course they never did that so I called Apple Support and a representative there went way beyond what he needed to do and we were able to uninstall and reinstall Creative Cloud and make it work again, although the AAMLaucherUtil icon remains there. Currently, it doesn't update anything like it did the first time I ran it, or act like it is trying to update anything, but it does open Creative Cloud if you have closed it.
Several days later (not the promised 24 hours) I got an email from my Voicemail Service with a transcribed message from Adobe Tech Support saying that they had tried to call me... at the number listed in my subscription payment details... NOT at the number I had told them to call me at, and since I am 7000 miles away from my billing number I didn't get the call. The message requested me to call them back. I did so, and the message on the VRU said I would have to wait approximately 30 minutes. Two and one half hours later (not 30 minutes) someone answered who was not Second Level Tech Support, and reiterated that it was not possible to transfer me to them, and he would note that I had called back and they would call me within 24 hours.... yeah right. By then after waiting all that time to speak to someone I was so mad that I forgot to mention the correct number to call me at... although I had mentioned it previously. Several days later (not 24 hours) they called the wrong number again, and when I didn't answer it then sent me an email that they were considering the case solved and closing it, and I could reopen it within 14 days.
I then called back and this time waiting 3 hours on hold, and the person who I spoke with (whose name I withhold for now) said he would reopen the case and they would call me within 24 hours... again he couldn't transfer me to them. Again I forgot to reiterate the correct phone number that I had told them the first time since I was so mad about waiting 3 hours on hold.
The next day, I realized that I had not reiterated the correct phone number, and I went into my account settings and changed the phone number in both places it exists, and then tried calling back to make sure they would call the correct phone number. This time I waited on hold for 4 hours, and finally gave up without ever being able to speak to a person.
The next day... still no call even to the wrong number since my Voice Mail would have informed me it there was a call.... I called Sales since that seemed to be the only way to talk to a real person, and screamed at them about this issue and was informed they couldn't do anything about Tech Support, or about associating my phone number with my case number, but he would put me in the queue for tech support since nobody was in the queue so they should call me back right away.
I did get a call in a few minutes, which said "If Valued Customer is available, press 1" so I pressed 1 and it went to music. I then waited for 15 minutes of music with no answer, after which I got an email from my Voicemail Service transcribing the message saying:
"Reschedule this call back for a later time press three to cancel this call back press nine. Your response was not recognized. Please try again. When valued customer is on the line press one to speak to a support specialist. If you need time to get valued customer on the line press two. To reschedule this call back for a later time press three to cancel this call back press nine. Your response was not recognized. Please try again. When valued customer is on the line press one to speak to a support specialist. If you need time to get valued customer on the line press two. To reschedule this call back for a later time press three to cancel this call back press nine."
... more. Please listen to your voicemail for the remainder of this message.
They can't recognize me pressing 1????? So who know... I was listening to music but did that mean I was really ever going to reach a real person, or was the Voicemail message correct and I would be listening to music forever?
So this morning I tried calling again only to receive message the the Tech Support Telephone Lines were down for scheduled maintenance until August 10th... I tried chatting... that is offline also.
Is there a way to associate my actual phone number with my case number... maybe somebody from Adobe actually reads these diatribes? I need to be called at or after 17:00 Pacific time.... I was told the hours are on Pacific Time.... although one representative who I was trying to coordinate the timing of the call with was very confused about the time zones. He was trying to tell me that the current time was 09:00 Pacific Time, which I knew to be wrong, and he finally admitted, after I challenged him to look on www.timeanddate.com, that it was 09:00 in Bangalore, and Pacific time was 20:00.

Thanks for your answer TSN!
I did try Chat yesterday and it didn't work.... said unavailable. I'll will try it again.
I do understand that this is a Community Forum, but it appears that some Adobe staff persons do read and respond to some messages, so since all other avenues of contact seem to not work, I thought I would try this just in case somebody from Adobe happened to read it and could do something.
A secondary reason I posted the whole explanation is that I thought maybe somebody else had experienced this issue as well and might comment on it.
As for it being a problem or not, maybe it is not. Adobe did work when I installed it. When I invoked that icon "AAMLauncherUtil" the first time, it updated Acrobat Pro and Installed Creative Cloud (which the original trial subscription had not installed).
I then noticed that these two icons didn't seem to do anything useful. The first time I called and was able to connect to support, the rather poor attitude person who answered just said to delete both icons in the folder... that they weren't needed. When I found that one of them could be deleted and not the other one "AAMLauncherUtil" could not be deleted, and since the tech support person had suggested deleting them both, I called back.
The next rather clueless person in tech support spent a lot of time trying to help get rid of it, but couldn't. When he was mucking around in the "Library" he deleted everything named "AAMLauncherUtil" from the Library (but left some stuff I would have imagined could have been deleted like references to my previous trial subscription.
After he got done, Creative Cloud no longer worked and he couldn't figure out how to fix it... we were getting messages the Creative Cloud was corrupted and needed to be uninstalled. He said he was going to refer the problem to a higher level tech support, and that he couldn't transfer me there... they would have to call me which would be in 24 hours.
The next day (since the higher level tech support failed to call back) I called Apple Support, and they helped me find a Creative Cloud Uninstaller and we ran that and re-downloaded and installed Creative Cloud again.
I would expect from the name "AAMLauncherUtil" that this icon would Launch Adobe Application Manager and perhaps try to update my product(s) like it did the first time, OR report that my software is up to date... as most other software update attempts would do. However what it really does now when I invoke the "AAMLauncherUtil" icon is just to open Creative Cloud just as if I had clicked on the icon in the top menu bar of my Apple Menu Bar. The Apple person suggested that MAYBE it is supposed to do that if you have shut down Creative Cloud for some reason, and want to start it up again without restarting the computer. Maybe that is so, but if it is, then I would have expected that they would have renamed the icon to Creative Cloud or something more descriptive of what it is supposed to do.
As is is now, I am not sure if it is a leftover remnant of my original updated installation that should have gone away when I updated and it installed Creative Cloud, or if everyone else running Adobe Acrobat Pro XI has this icon in their Launchpad as well and it is supposed to be there for some unknown reason to perform some unknown function.
After all that happened, I did update Creative Cloud, but that was within Creative Cloud itself when it reported having an update available, and not using the "AAMLauncherUtil" icon at all, so that would appear to negate it's possible update functionality wouldn't it?
Assuming you are using a Mac, do you have such an icon in LaunchPad?
Thanks for your help!

My video freezes when calling to mobile

I've discovered the pattern that every time I have a video call between my Windows 7 laptop and a mobile phone on the other side, my video freezes after a few seconds (the other party only sees the last frame/photo then on their mobile, whereas I see the video stream normally).
Is this some weird "feature"? Is there any way to fix it?
Video-calls between mobiles as well as between computers work fine.

Have they done the Quicktime setting ?
It should match his and your download speeds respectively for best results.
When in a chat Open the Connection Doctor from the Video menu and tells us if the incoming Video bar has dropped to zero.
This will mean that the other end is not sending properly (Or does not have the conection speed to do so)
Both of yopu should also check iChat > Preferences > Video section > Bandwidth Limit drop down. This should be set to NONE
11:03 PM Saturday; November 11, 2006

Port in my number to overwrite the current verizon number

Let's say I opened a line with Verizon to test it out and signed a 2-year contract, and got phone number AAA-AAA-AAAA. After a couple of months when I think everything is great, can I port my number BBB-BBB-BBBB from another provider to my account, and overwrite the AAA-AAA-AAAA number? Or would it be considered as terminating the AAA-AAA-AAAA line and add the BBB-BBB-BBBB line, thus I will be charged with ETF?

Hello happy community members,
This seems to be a trending topic since the tiered data pricing was implemented. The information that I'm about to provide will be based on the information given and not on an actual account. Keep in mind if you have specific account related questions about an intended account change then the best way to receive a customized answer would be to send me a private message.
When a mobile number is being replaced with a port in number then the original service agreement and the grandfathered feature remains in place. Although the mobile number will change, other information related to the service when it was initially activated will not change. Some examples of this information are the customer agreement, MIN (mobile identification number) associated with the service, MEID, etc. Internally, the activation date and grandfathered feature can easily be traced systematically back to the original date in which service was initiated. As far as the grandfathered feature then there are some changes that can determine if it will be retained. Some examples are as follows.
1. Deactivating a smartphone and activating a basic phone to the mobile number will lose the grandfathered data plan.
2. Features changes made on My Verizon or by phone that requires current data pricing. (Usually done by mistake)
3. Disconnecting a mobile number and then reactivating service. (New service will be based on current available services)
So GTIMKV, if the situations above aren't applicable to your situation then you will continue with your service agreement as it was originally initiated and enjoy your unlimited data if you already have it.
Thank you...

HT1349 I don't have a MAC, I have an HP pavilion a706n so I don't know what the serial number is. The HP serial number was accepted and neither was my itunes serial number. Does anyone know where to find the serial number?

I am trying to find the serial number that is required by itunes for troubleshooting. But the trouble is, I don't know what it is.
My computer is a HP (not a MAC). I have the itunes serial number. Before loosing my almost 5000 songs I was using an
older version of itunes. I thought if I upgraded to the new version that I would get my itunes back. When I noticed the songs
were gone was when I was taking saved items from my documents into a new 500G hard drive I bought yesterday. After
loading a bunch of stuff it (not any itunes) I went into itunes and ALL of my songs were gone. What happened? What should
I do? & Where is that serial number they are talking about?

Hi Susan,
Not sure why your post ended up in the Apple Server section but here goes.
By default your music should be located in one of the following locations
which you can see by clicking on My Computer
Windows XP - C:\ - Documents & Settings - Username (your name or your login name) - My Music - iTunes
Windows Vista/7 - C:\ - Users - Username - My Music - iTunes
it's unlikely your music has been wiped and more likely that iTunes can't find the library file that tells it what music is in your collection and where it's located. This can happen if you renamed or moved one of the folders above to something/somewhere else. Another idea is to do a search and look for files in a format used by iTunes such as .mp3 or .aac which might show you where they are.
Hope that helps
Beatle

Spool - Page Number Adds to the same spool number

Hi Gurus,
I have a scenario here. Whenever I print an invoice (Using Output Types) the total page of that number adds up to only a single spool number.
For example I printed the invoice number1 and it generated spool number 00001 with 1 pages. And then I printed another invoice lets say number2 having two pages. when i look my own spool requests, the spool number 00001 now has 3 pages.
Is this normal?
Regards,
Andre

Hi,
Will it not must create two spool numbers for the two Invoices?
Regards,
Andre

My AppleCare protection plan wont register. I enter the number given and the correct serial number for my macbook but it wont work.

I have entered the correct registration number for protection plan and the correct serail number but it fails. I am outside calling hours (as I dont have protectionplan lol) and am eager to get it up and running.

Call AppleCare during regular hours and they'll register it for you. In the meantime, there is nothing for you to "get up and running" except your computer, and you don't need to register AppleCare to do that.

Material document number to match the FI document number

Hello MM Gurus,
May I know if anyone here has encountered a requirement where the material document NUMBER generated from goods movement (GR, GI) should have the same NUMBER with the FI accounting document generated with it? I tried to match the number ranges initially but this would only apply to 1 company code.
Are there user exits here that I can use?
Regards,
Marvin

Hi
You can create Number ranges for each year in OMBT transaction.
regards
Srinivas

Error when calling a web service in PLSQL, "the page could not be displayed

Hi, I have a simple web service based on a function returning the name of the employee, I tested it against the standalone oc4j instance and it's working fine, but when I try to call it from PLSQL the error "the page could not be displayed" appears.
What am I doing wrong?
CREATE OR REPLACE package body p_call_ws is
function f_query_ws( pIp varchar2 default '100') return varchar2 is
v_wsresponse varchar2(2000) := null;
begin
utl_http.set_proxy('pccproxy', NULL);
select utl_http.request( 'http://localhost:8888/ws/wsemp?invoke=pNombre&pId='||pIp)
into v_wsresponse
from dual;
return(v_wsresponse);
end f_query_ws;
procedure p_call is
v_wsresponse varchar2(2000) := null;
begin
v_wsresponse := f_query_ws('100');
dbms_output.put_line(v_wsresponse);
end p_call;
end p_call_ws;
=====================
Whe I call the function in SQLPLUS> select p_call_ws.f_query_ws from dual;
The output generated is
Problem-->The page cannot be displayed

Sorry I cannot help with this utility. What is your database version? In 10.1 and later, the recommended way is using JPublisher. Download JPublisher 10.2 and the webservice callout utility.
http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/index.html
http://www.oracle.com/technology/sample_code/tech/java/jsp/dbwebservices.html

I received a $25 iTunes gift card when cashing in my Air Miles points and when removing the label on the back or the card (which had tape over top of it) there is a number missing from the 16 digit number. What do I do?

I received a $ 25 iTunes gift card - when I cashed in some air miles points. Unfortunately the label on the back was covered in tape and when I tried to remove the tape and the label I found that there were only 15 numbers out of the sixteen. How can I find out what the number/letter is that is missing? If I provide you with the GCA # will that help?
Please get back to me,

Consult this handy guide: iTunes Store: Invalid, inactive, or illegible codes

When I use Firefox for Yahoo mail the tabs such as sign out, search email, help seem to be disabled. How do I make them work? Works in Internet Explorer

There are a number of tabs at top of my inbox such as sign out, search email, help, etc. They do not work. For example cannot insert a name for search email- will not give me the curser to do this. When I use internet explorer these tabs do work so not a problem with Yahoo mail- must be problem with Firefox. Recently updated Firefox.

SafeBrowser posted Recently, the Yahoo Toolbar and the Babylon extension have been reported to cause that problem. They seem to overlap invisibly over the top of the web page display. If you have either or both, uninstall or disable them/it, or see if an update is available that solves the problem.
See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
I disabled the Babylon extension and Yahoo Mail works now.
Thank you SafeBrowser

When calling my mobile number, it makes the 'no such number' tone?!

Similar Messages

Maybe you are looking for