When chane the clip speed it's jitter and shakes

hi
i want to ask about speed change
i use final cut 7 and when i change speed the clip it jitters and shakes
but the same clip i change the speed finat cut 6 it does not jitter
can anybody help me
i tried all known methods but i can not resolve the problem
i use hd 1920*1080 i apple proress 422 hq codec and my sequence settings and clips the same codec. even i take the clip to a blank sequence fcp asks me this is not match. changege sequence settings to match the clip settings? i sayt it ok and now my sequence and clips are same codecs. however the clips when i play them revers or slow it jitter.
field dominance is none. not upper or lower and sequence filed dominance is none too. i tried to change video processing options and render options but the same result.

Well, you haven't answered any of my questions. It's certainly not an issue with codec or format, so you've wasted a lot of time there.
As I have no idea what you mean when you say jitter, it's impossible for me to say what is causing it. Are you using Frame blending? What is the source of this video? Refer to my last post and see if you can answer some of the questions.
Patrick

Similar Messages

How can I adjust the clip speed in the editing window of Premiere Elements 11?

In former versions of Premiere Elements I could change the function while pushing the corner of a clip in the editing window: it was not cutting only, but I could also use it to adjust the speed of a clip (clicked the clock icon, after that the speed of a clip was adjusted perfectly).
But in Premiere Elements 11 this funktion seems to have gone: Now the timeline in the editing window seems to have the cutting function only!
Yes, I still can use the function "prolong time" (or whatever it is called in English, I use the German version), but in this I just can guess what percentage would fit and it's a very hard "try & error" part to get it right. In the former version the speed was adjusted "automatically" to fit the duration the clip needs – that was way more comfortable.
So, is this function really gone? I couldn't emagine why! Or how is this done now?
Couldn't find any post or video, explaning how to do that now.
No: The new "time zone" feature is not the same: it's not adjusting the needed speed rate automatically.
And by the way: There is a bug in that fuction: When I once added a new time zone, I can't remove it – clicking "set back" (or reset) doesn't do anything, the time zone stays where it is and is not deleted at all! I'm using a Windows 7 Ultimate system (64 bit) ...
I really would appreceate if someone could tell me how to adjust the clip speed perfectly to the needed duration of a clip!
Thanks in advance!

SG
An interesting point that you point out
"However, the drag-to-size method of adjusting Time Stretch has indeed been removed from version 11."
I am assuming that you are referring to an earlier version of Premiere Elements, having a Time Stretch icon (clock icon) above the Timeline to select, and then perhaps, with the mouse cursor, dragging on the end of the video clip to increase its duration. The keyboard shortcut to select the "clock icon" in thar instance is X. If you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Windows/Timeline Window/, you will mysteriously find "Time Stretch Tool" command with a keyboard shortcut X. And, if you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Applications/Time Stretch, you will find "Time Stretch" with a keyboard shortcut Ctrl+R. Bottom line: I have not gotten the keyboard shortcut X to work in Premiere Elements 11 in this regard, but the Ctrl+R does to bring up the Time Stretch dialog to do the job.
In accord with this business of what is and what isn't...the good old Razor Tool. That disappeared from sight a long time ago. Yet users were able to use that in later versions using the keyboard shortcut C. Now for me that "C" does not work to change the mouse cursor to a razor for clip splitting at the Timeline level in Premiere Elements 11 in spite of the fact that Edit Menu/Keyboard Customization/Windows/Timeline Window continues to show Razor Tool command with keyboard shortcut C.
On the good news side of things, if one trims a clip in the Preview Window, one is still able to drag that trimmed clip to the Timeline (Expert view) and drag it out on either of its edges with the mouse cursor to recover the whole clip. And, the mouse cursor is still going to be that red ] with a double edged black horizontal arrow going through it.
ATR

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

I am trying to convert a video clip so that i can slow down the clip speed, but i keep getting an error -34. any ideas?

I am trying to convert a video clip, already in imovie so that I can slow down the clip speed, but I keep getting an error -34. Any ideas?
Thanks!

Hi Russ,
Thanks for your response. I am not an experienced user of FC or other video editing software but if its that hit and miss I think I will go to the trouble of finding some better software - I have a busy enough life as is, I don;t want to get into second guessing what a software problem might be!
I have just successfully exported my video to a master file using one of the Apple codec options so it looks like it could be to do with the H.264 codec. I am wondering if Apples Compressor software would solve this problem - the only way to try this it to buy it, there is not trial for the compressor app. Any ideas?
Thanks
Gerry

When downloading from my PD 150 to the event window in my iMac the clips are out of order and split into many subclips ac iMac the clips in the

when downloading from my PD 150 to the event window in my iMovie the clips are out of order and split into many subclips. Very frustrating

Nevermind, somehow it's magically back in order.

Iphone 4: while talking, phone automatically switches onto facetime and at other times when talking the sound "beep beep" is heard and disconnects from call?

Iphone 4: while talking, phone automatically switches onto facetime and at other times when talking the sound "beep beep" is heard and disconnects from call? Anyone know what is happening??

Basic troubleshooting from the User's Guide is reset, restart, restore. Has any of this been tried?

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

When approving the Agreement or Organizer, nothing happens and screen re-appears

When approving the Agreement or Organizer, nothing happens and screen re-appears

Are you getting any error message, or does it says : This program has stopped working' (if you are using win 7)
Please try this link: troubleshoot system errors,freezes
Thanks and regards
Harshit yadav

Video is normal until I drag the clips down into Sequence 01, and then they are severely cropped.

Video is normal until I drag the clips down into Sequence 01, and then they are severely cropped on all sides. What setting do I have wrong?

Hi Brenda44,
Please right click on the clip in the project panel and select new sequence from clip option to create a sequence according to your clips.
Regards,
Vinay

Confused why my video exports at 640x480 when all the clips are 1280x720

All of my clips are from a canon 7d shot at 1280 60fps mostly surfing so I can slow it down. I added one clip which is at 640 to the project and when I exported the project in H.264 or any other setting it is only at 640. So I went back removed the clip and tryed to export again and it still only does 640 even though all the clips are now at 1280. I would hate to have to edit all over again. Thanks for any help.

Thanks I realized I can click the wrench at the bottum right of the inspector box and change the properties back to 1280 so that helped but I couldn't change the FPS they are stuck on 30 not the end of the world. I think I must have accidently put a 640 clip as the first clip when I dropped into the timeline and even though I deleted it, it kept everything at that setting . It would be nice if you could change the properties after the fact.

Does Airport Express really communicate the same speed to both Mac and non-Mac devices?

Okay, so to fully understand my situation, here's a briefing: Our old Netgear router was not pushing nearly the speeds we were paying for (we pay for 30 and were getting 10-15 max, usually much less). I recently got an iMac which means that all of my devices are now Apple made, so I decided to get an Airport Express to hopefully improve our wireless speeds. I set it up with the modem going in the WAN port and the old router attached to the LAN port so that it could still act as an ethernet hub for the few hard-wired devices knocking around. I set up both a network and a guest network, with our original one still active through the Netgear router.
I get 45 Mbps from the new network on my iMac, but my roommate is only getting around 9. If he connects to the old one, he caps out at about 25. Is the wireless card in his PC just not capable of receiving more than that? He insists that since it's an Apple router it is not as compatable with non-Apple products. Interestingly, I get faster speeds on my iPhone from the guest network than I can from either the new or old main networks in our house.
I know this is a really long question, but has anyone had this same problem? Any help would be greatly appreciated.
Also: isn't the wireless speed of the old Netgear router still basically being pushed through the Airport Express, as it's the only thing connected directly to the modem? Are there any settings I can change to make everything run smoothly? If the PC, Android phones, etc can connect to the new network at the same speed as my Apple products, then we can eliminate the old network altogether if that will help.

I think I answered my own question. I found this on the web:
http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
Seems to suggest that using this third party exe to format it instead of windows inbuilt one will allow for partitions greater than 32GB. So this looks the way to go. And the 2GB limit per file is just for FAT16 not FAT32 apparently, but even if it is I only have a few iso/video files bigger than 2 gig so will just use a splitter on them.
Hope this is useful to someone else

"Error When Creating the form" in "Salary Statement"-Benefits and Payments

hi
When I enter the option "Salary Statement" (in "Benefits and Payment") shows me the error "Error When Creating the form"
http://img571.imageshack.us/img571/9986/payroll1.jpg (in "Salary Statement")
http://img153.imageshack.us/img153/3007/payroll2.jpg (My Error - "Error When Creating the form")
but, my sap system has Payroll customized, check it entered this tcode RPCEDTE0 I also put the appropriate values to obtain a good result.
http://img716.imageshack.us/img716/2544/payroll5.jpg (screen RPCEDTE0)
http://img541.imageshack.us/img541/1593/payroll6.jpg (result RPCEDTE0, Remuneration Statement correctly)
What I must customize addition to Payroll(back-end) to run this option of "Salary Statement"?
I hope for posts and helps,
Ivan

hi Sandip
I clear the temporary files, but the error persist.
I think so, my error is because otherwise customizing the salary statement is seen in ERP (Back-End) but I can not see through the sap portal (Error: Salary Statement http://img153.imageshack.us/img153/3007/payroll2.jpg)
thanks for your post and helps,
Ivan

Isssue when collecting the transport request for a query and its elements

Dear All,
When collecting a query and its elements, only the query is getting collected in to the request and not the elements and I an error is getting displayed as You can not use request xxxxx and elements could not be saved. This is in bw 3.5.
Can anyone suggest?
Regards,
Ram

Hi,
In the transport connection make sure that all the elements for the query which you need are manually checked.
Just drop down the menu and see the elements of the query and check if they all are selected or not.
Here you can also see if the elements are already present in some other TR.
Just delete all those TR's before creating this new TR.So that these objects are unlocked or it will not added to your new TR niether it will give an error.
Also make sure that all the elements have same data package and none of the query elements are assigned to temp package or any other package.
Once you are sure that all the elements are checked and above told issues are corrected then only create the transport and release them.
Thanks
Ajeet

When minimizing the Firefox window, it totally disappears and can't be maximized again.

After a unknown crash of Firefox, I restarted Firefox.
The button appeared in the tasbar, but the window was never to be found.
Clicking the button didn't help.
I used the windows taskmanager to maximize the window, which worked OK, but.........
When clicking the "size down" button (top right middle button), the window again disappeared and could not be resurrected again in a normal way.
So at the moment I am stuck with a maximaized window, and I can't resize and move it anymore....
Sincerly hope you have a solution....
Best regards,
Lody J. Claessen

* Use Restore or Maximize in the right-click context menu of the Taskbar icon to set focus to the Firefox application if you do not see the Firefox window.
* Open the system menu of that Firefox window via Alt+Space and see if you can move and resize that window (use the keyboard cursor keys).
If that works then first close all other open Firefox windows and then close Firefox via "File > Exit/Quit" to save that setting.
If the above didn't help then see:
* http://kb.mozillazine.org/Corrupt_localstore.rdf

Macbook pro not turning on after SMC reset. I have the following problem. Yesterday I noticed that my mbp 2011does not sleep when closing the screen. smc due loud fan and an X on battery symbol

Yesterday I noticed that my mbp 2011 dos not sleep when closing the screen cover. Today I Turner my laptop in. However the fan was working loudly and stayed loud. After Start I noticed an X on Battery symbol. Clicking on it, it showed 'no battery.' I found out that a potential solution for this problem was SMC reset. I also noticed that the leds on magsafe was not lightning. Despite this I tried to execute the smc reset as described on apple support site. Switching off, plugin the magsafe connector, pushed the buttons shift + alt+ ctrl + power. Then i pushed the power button, but my mbp is not turning on. I pushed several times on the power button but nothing works. The magsafe is also dark meaning the leds not lightning. Can anyone here help me on this ?

Problem solved by my own. But do not how :) magsafe again working and the laptop tooo

When chane the clip speed it's jitter and shakes

Similar Messages

Maybe you are looking for