When/how do the scheduled packages switch status from 'scheduled' to 'ready' in the package Scheduler Status?

Hi,
I've scheduled FX Restatement packages to run each day in two different versions (6 times a day starting at 0615) for a year or so. However when I check out the 'View Package Status' the jobs I set up in the first version doesn't run when they are supposed to. I checked out the 'Package Scheduler Status' and I found that the jobs that DIDN'T run was stuck in a status called 'scheduled' while the jobs running had status 'ready'.
So the question is how can I make sure all the jobs are running? Do I have to or can I do something about this myself? If I try to set up a package in two different versions, can the fact that I set them both to run at 0615 generate a conflict resulting in just one of them running?
Hope someone has answers to these questions, would be so great to get this out of the way. Thanks!
K

Hi Kristoffer,
remember to click on enable schedule when you schedule a package.
To know if a scheduled package is ok you can see first if present in the tblschedule of your appset and also if present in the windows task schedulerif with status "ready".
After you just have to check the view status if you found the package execution completed you're sure it's running. " version at the same time can cause issues also with different packages better to schedule with a sufficient delay to be sure that the first has ended, in your case 1 package is ok.
I would delete the 2 packages from bpc, checking also the windows scheduler to be sure that no packages are running and rebuild one from scratch setting repeat every 4 hours and checking "enable schedule".
Regards
     Roberto

Similar Messages

  • How to read USER1 DIP-switch status of a cRIO chassis from FPGA?

    How can I  read the status of the DIP switches on a cRio chassis from the FPGA?
    I am working with a  cRIO 9022.. My idea is to set the system into a "service" mode by setting the USER1 switch to ON and communicate with the FPGA via the FPGA-GUI(VI) on the host computer instead via the RT module which is used under normal conditions.
    Any ideas? Unfortunately, I do not have an unused channel left ...and (as far as I know) can't use the RS232 from the FPGA.
    Many thanks in advance,
    Luke
    Solved!
    Go to Solution.

    Hi, this is the correct information. You cannot read from the FPGA the DIP switch status. The only thing you could do is to use the Read Switch.vi function located under Functions -> Real Time -> RT utilities  palette
    This is how you probably know only for the RT Host side and not the FPGA.
    Regards Anoj
    Anoj Mubarak
    National Instruments

  • When/how does the UNinstaller get called?

    This simple demo. of using the ExtensionInstallerService
    has me confused..
    http://www.physci.org/jws/application.jnlp
    It behaves as I expect on installation.
    At time of installation, the user is prompted to
    accept a psuedo 'license agreement'.
    If they accept it, the application is launched.
    If they refuse it, it is not launched.
    If they refuse it, they can try again later and
    the EULA dialog will be shown again, and
    will continue to be shown, each launch, as
    many times as the user refuses it.
    But how/when is the uninstall option called?
    In this example, I used the uninstaller option
    simply to thank the user for using the application.
    However, I do not ever see the 'thanks' dialog.
    So far I have tried uninstalling the app. from both
    the Java Control Panel, as well as Windows own
    Add/Remove Programs dialog.
    Does it work for anybody else?
    The source for the installer that I am currently
    using is as follows.
    package test;
    import javax.swing.*;
    // classes of the web-start API, used in this example.
    import javax.jnlp.ExtensionInstallerService;
    import javax.jnlp.ServiceManager;
    import javax.jnlp.UnavailableServiceException;
    class Installer {
      Installer() {
        try {
          ExtensionInstallerService installerService =
            (ExtensionInstallerService)ServiceManager.
              lookup("javax.jnlp.ExtensionInstallerService");
          /* We do not need the progress bar as progress
          is determined by the user accepting the EULA.
          They can consider it as long as they like. */
          installerService.hideProgressBar();
          int result = JOptionPane.showConfirmDialog(null,
            "Do you agree to the EULA?",
            "End User License Agreement",
            JOptionPane.YES_NO_OPTION,
            JOptionPane.QUESTION_MESSAGE );
          boolean agree = (result==JOptionPane.YES_OPTION);
          if (agree) {
            installerService.installSucceeded(false);
          } else {
            JOptionPane.showMessageDialog(null,
              "Perhaps another time..");
            installerService.installFailed();
        } catch (UnavailableServiceException e) {
          e.printStackTrace();
      public static void main(String[] args) {
        if ( args[0].equals("install") ) {
          Installer installer = new Installer();
        } else {
          /* No need to do anything on uninstall,
          but thank the user for their patronage */
          JOptionPane.showMessageDialog(null,
            "Thank you for using (Trivial) Application!");
    }

    I submitted a Bug Report for this, under the title..
    installer-desc UNinstaller never called
    The basic gist of it is..
    Java web start (JWS) offers the installer-desc
    element to identify an installer/uninstaller
    for an application. The intent of the installer
    is to do any application set-up/pull-down that
    can not be handled by the standard JWS behaviour
    of caching the classes/resources at 1st launch,
    and clearing them at uninstall.
    The 'install' side of the installer-desc element
    seems to work as advertised, but as has been noted
    in the web start forum a number of times*, the
    installer is never called at time of 'uninstall'.
    * Though none reported successful resolution of
    the problem, it also seems no one took it through
    to a bug report.
    http://forum.java.sun.com/thread.jspa?forumID=38&threadID=5124101
    (one report)
    http://forum.java.sun.com/thread.jspa?threadID=790898
    (two relatively recent reports)
    http://forum.java.sun.com/thread.jspa?forumID=38&threadID=263691
    (1 report from June 2002)

  • )How can we schedule the info package daily run at 6 AM, with out useing in

    Hi
       Can any one explain 1) what is information broadcasting &how can we use this.
    2)What are the settings we have to do when we use the charts in WAD's
    3)How can we schedule the info package daily run at 6 AM, with out useing in process chains
    Thanks
    Bharath

    Hi,
      Information broadcaster :
          you can precalculate and distribute(thru mail) the query, workbook and webtemplate through online link or html file to the receipents (users).
    have a look at the below link.
         http://help.sap.com/saphelp_nw04/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm
    Infopackage scheduling:
         you can schedule the infopackage daily at your desired time .In the schedule tab ,select the start later in background and in the scheduling option give the date and time and give the period values as daily.
    Regards,
    Siva.

  • How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app?  When I leave the car and return to continue hearing a book, it has switched to iTunes.

    How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app?  When I leave the car and return to continue hearing a book, it has switched to iTunes.

    The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
    The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
    This is designed to be done right away with a new iPhone.
    If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

  • What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

    What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

    You should be able to select Force Quit from the menu beneath the Apple icon in Finder
    and choose to Quit iPhoto from there, without messing up the Mac OS X in the process.
    OS X - Support
    Not sure if rebuilding the iPhoto library would help this issue. However if you had to
    turn off the computer without the correct method (unplug, etc; instead of menu choice)
    the system may have accrued damages and should be checked, maybe repaired by
    use of the Disk Utility in the system. Or restart the computer in Safe Boot mode, then
    run 'repair disk permissions' while it is running in that reduced mode; then restart after.
    •Understanding Safe Mode - tuts+ computer skills tutorial:
    http://computers.tutsplus.com/tutorials/understanding-safe-mode--mac-59897
    •OS X: What is Safe Boot, Safe Mode?
    Suggestions on how to use Safe Mode in article, to resolve issues, may be helpful.
    There likely are other means to rectify troublesome applications, including reinstall.
    Be sure to backup your music, image, video, and other work on an external drive
    or suitable device as a precaution against loss should there be a hard drive failure.
    iPhoto - Mac Apps - Apple Support
    There should be some tips and help information using iPhoto via this tiny Support link.
    Good luck & happy computing!

  • My iPhone has a protective cover on it and I carry it in my pocket a lot.  Quite often when I take it out of my pocket the silent/ring switch is off and I am sure it was on when I put the phone in my pocket.  How can this be happening?

    My iPhone has a protective cover on it and I carry it in my pocket a lot.  Quite often when I take it out of my pocket the silent/ring switch is off and I am sure it was on when I put the phone in my pocket.  How can this be happening?

    Protective cover as in screen protector?  This would have nothing to do with the silent switch.
    If you're referring to an actual case though... take the case off and see if the problem continues.
    It may be as simple as the silent switch being lose, which will require a device replacement to resolve.

  • When you preorder the iphone5, how do you switch your existing number to that phone?

    I have an ATT iphone4 now. If I preorder the iphone5 tomorrow via Apple.com, how do I switch the phonenumber from old phone to new phone once I get it in hand?

    When ordering you will provide your cell phone number and AT&T account info.   When you receive the iPhone and activate it, it will take over that phone number.

  • When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

    When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

    Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
    Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
    Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
    The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
    Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
    They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

  • When I view the summary of content on my iphone5, the status bar at the bottom to the iTunes window shows I have 3.90 Gb's of "other".  What is that about and how can I free up that space?

    when I view the summary of content on my iphone5, the status bar at the bottom to the iTunes window shows I have 3.90 Gb's of "other".  What is that about and how can I free up that space? 

    I simply restored my iPhone from most recent  iCloud  backup.  Poof. Good to go!!!

  • Safari status bar disappears.  I have tried clicking on show status bar and it will only appear when I move the cursor to the top of the screen.  I can not minimize the open page only full screen or close the browser.  Any idea how the rectify this

    Safari status bar disappears. I have tried clicking on show status bar, under the View tab and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page, only full screen or close the browser. Any idea how the rectify this issue?

    One enters and exits full-screen with control+command+F keys. This is on the View menu in Safari. Optionally, the green traffic light in your browser title bar, if you roll over it, has the full-screen control it it. While in full-screen mode with Safari, moving your mouse pointer virtually up, and off-screen reveals the Safari title bar again, and you can click the green traffic light to exit full-screen mode.
    You can hide/show the status bar by simply typing command+/. This too, is on the Safari View menu. and in 10.10.1 — it works reliably for me.

  • How do I hear Garageband in multitask? I am playing guitar in GB using Apogee Jam. Would like to read lyrics in Safari while hearing guitar in background. But I can only hear GB when it is the active program. Sound stops if I switch to another app.

    How do I hear Garageband in multitask? I am playing guitar in GB using Apogee Jam. Would like to read lyrics in Safari while hearing guitar in background. But I can only hear GB when it is the active program. Sound stops if I switch to another app.

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • How can i initialize a button (Switch when pressed) to be always disabled when i start the programm.

    Hello
    How can i initialize a button (Switch when pressed) to be always disabled when i start the programm. My problem is that the state of the button is always the state in which it finihed last time.
    Thanks
    Lukas

    A button is either true or false. "Disabled" is a property that determines if the button can be operated or not.
    It seems from the rest of your question that you actually want to ensure that it is set to false, but remain enabled. This is easiest done with a local variable as already mentioned by becktho.
    If you want to disable the button, use a property node.
    LabVIEW Champion . Do more with less code and in less time .

  • HT201436 I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

    I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

    Voicemail is a carrier feature, not a phone feature. This has to be fixed by your carrier, so contact them, as obviously, voicemail is not properly provisioned on your account.

  • How to find the ME29N 'USER EXIT' when our save the release PO after.

    How to find the ME29N 'USER EXIT' when our save the release PO after.
    which user exit will be used?
    thanks.
    alex.

    Hi,
      process :
        go to tranx code :   ME29N ,
           System---->Status , here copy the program name (SAPLMEGUI),
         go to abap editor and specify the program name SAPLMEGUI and find the package "ME".
         tranx code : CMOD ,  Utilites--->Sap Enanchement,
                                         specify the package name : ME
                                          and execute, displays a list of exits ,
                                 and find out our suitable exit based on requirement.
    check these :   EXIT_SAPMM06E_021
    reg
    Siva

Maybe you are looking for