As an exchange acct user, why am I copied when I reply to all? This didn't happen until upgraded to 5.

Is anyone having difficulties with reply to all? When I receive a message and reply to all, I am cc'd. It's a pain because it creates an extra email to myself that I just have to delete. It was not happening with my iphone 3GS and began when I purchased the iphone 5. Interestingly, it is only happening with my work email which I use Microsoft Exchange and not my personal email.
Went to Apple Store. They seemed unfamiliar with it and suggested I delete and add my email acct back in. I did this, but it did not solve the problem. Right now, I'm just deleting myself in the cc before I hit sent with reply to all.
Any help would be great? Thanks

Never mind... after thinking about it, my initial reply was incorrect.
Message was edited by: diesel vdub

Similar Messages

Why do i get a copy of an e-mail when i reply to all using the iPhone?

why do i get a copy of an e-mail when i reply to all using the iPhone? I don't want to be included on the e-mail that I am sending out.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
 Cheers, Tom

On my ipad and iphone email when I reply to all it goes to main screen. It lets me reply to all from a PC. Does anyone know why?

On my ipad and iphone email when I reply to all it goes to main screen. It lets me reply to all from a PC. Does anyone know why?

I actually figured this out. One of the people I work with has an Android phone. My ipad and iphone will not let me respond to his email when sent from his phone. Don't know why but that is what is going on. I am going to experiment and see if I can find anyone else with an android that I can't respond to.

IPhone Users Email Account Settings Change Somehow and Reply to All CC's themselves

I have an odd one here for sure.
I am an exchange administrator for a organization and we believe that since getting iPhone 6's two of my execs have had
an issue where their iphone AND their ipad have issues. It is reported that a reply to all will cc themselves on every email and we found that when looking at the mail account settings the username actually changes from [email protected] to [email protected]
We see this on both of the devices (iphone and ipad) and we feel that it began when they two execs got their iPhone 6's.
I will also add that we do not have any way for these devices to communicate with our internal network other than just ActiveSync. There is no internal wifi network or anything like that. We have updated the device to the latest version of iOS
and we just migrated their mailboxes to Exchange 2013. I will add that this happened on 2010 as well and the migration just happened to be occurring during the time that we were trying to resolve it. It has been going on for quite a while, but
is starting to make a scene internally.
We have since found that some of our regular users have this issue as well, but no one in our IT staff has seen this. I am an Android user, but the rest of my staff are iOS users.
Anyone seen this before? Any ideas? How could this just flip the account settings like this?

Sounds very similar to this:
https://support.microsoft.com/en-us/kb/3012580
Here are some more issues with EAS and devices as well in case this isn't it.
https://support.microsoft.com/en-us/kb/2563324?wa=wsignin1.0
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

How do we avoid users keeping a local copy when forwarding on NMS4.15? I saw the answer for iMS...

You should be able to set up forwarding and then unselect all delivery options for the user's account through Console.

Users steal ownership of Wiki Articles in Profile Activity -- Is this bug still happening?

Is anyone seeing this Wiki/Profile bug still happening (not just the results of how it happened last year):
Users steal ownership of Wiki Articles in Profile Activity
This is where the wrong person gets credit for the article (they were an editor but not the author) in the Profile Activity tab and thus, they get the Author points.
Still happening?
Meaning that the bug starts happening this year (and not just the issues with it last year).
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

You have a macbook pro too (as noted), does this happen with yours? If apple changed things and it's normal, like as you stated that it was lite so you'd know you're computer is 'on' but I'd like to know for sure if that's what it's supposed to be doing. (nip it in the bud if there's a problem)
I know it isn't sleeping (not pulsing) but since the light is on (steady), it is something I noticed right away. For example, right now as I type this, with the MBP on my desk w/ the cinema display plugged in (w/ a keyboard) and the lid is closed on the MBP, the light is ON right now. Not pulsing, but a steady light. Doesn't seem like it should be, to me. (at least in my view)
Thanks for your reply Josh.

Recently whenever I start a youtube vid , the IDM 'download this' bar always shows 2 MB file size . I think the videos are streaming in 2 MB partitions - which explains why vids start buffering every now and then . This does not happen on ubuntu . Help!

Firefox Version : 4
Os : Win XP , Ubuntu ( Dual boot )
P.S. - tried updating and reinstalling , no luck

Hello kmanthie,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
I worked on behalf of HP.

Why the HTML copy when creating Flash?

Just started working with Flash and I noticed when I publish
a page that I'm working on Flash creates a HTML version as well.
What I am working on will be placed within an existing site which
is all html. Not sure the reason for the additional html page and
what to do with it. Sorry if I'm a bit dense about this but ya
gotta start somewhere.

as to what would be used for? the HTML? It provides the tags
for proper display of the SWF. From the
help docs:
To display a SWF file in a web browser, an HTML document must
use the object and embed tags with the
proper parameters.
Playing Flash content in a web browser requires an HTML
document that activates the SWF file and
specifies browser settings. The Publish command automatically
generates this document, from HTML
parameters in a template document.
The template document can be any text file that contains the
appropriate template
variablesâincluding a plain HTML file, a
file that includes code for special interpreters such as
ColdFusion or Active Server Pages (ASP), or a template
included with Flash.
To manually enter HTML parameters for Flash or customize a
builtâin template, use an HTML editor.
HTML parameters determine where the content appears in the
window, the background color, the size of
the SWF file, and so on, and set attributes for the object
and embed tags. Change these and other
settings in the HTML panel of the Publish Settings dialog
box. Changing these settings overrides
options youâve set in the SWF file.
just search help docs (F1) for "Using object and embed tags"
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
westlight wrote:
> Thanks. Still reading on as to what it would be used
for. Just for positioning and layout info?
>
> Back to the tutorials, and the Flash for Dummies book.

Prepping New Child Domain for Exchange so Users can use it

I have a new Child Domain that needs a "prep" for Exchange 2010 User objects. Instructions don't indicate on which DC this "prep" needs to be made.
Anyone done this before? Thank you!!
Charlie

Hi ,
You can prefer anyone of the domain controller in the child domain for preparing the domain .
Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTermsReference link : http://technet.microsoft.com/en-us/library/bb125224(v=exchg.150).aspxOn that above link please refer the topic "Let me choose which Active Directory domains I want to prepare"RegardsS.Nithyanandham
Thanks & Regards S.Nithyanandham

Why can i not buy music from itunes store,this only happened recently

Why can i not buy music from itunes store,this has only happened recently ?

O.K. Everything seems to be in order now!
I don't know what happened but this is the results....
After attempting to edit change the information on my iTunesMS account at least 7 times, I posted the above question, logged out of iTunes, closed down all my apps and turned off my computer.
A few hours later, I thought I would give it one more try and when I turned on iTunes, went to the Music Store and then 'reviewed' my account... it had my old American address on it with the country listed as Sweden... I just left it alone, as it didn't have my credit card info listed at all... Curiously, I'm clueless about that (though I did send this same complaint to Apple during the first posting... did that have anything to do with it?) When I clicked the continue button (without changing any info) it prompted me that I was finished setting up my iTunes Music Store account and I was immediately able to download some songs....(using the iTunes Music card--- I have not tried my MasterCard!)
So basically, I did nothing except close iTunes, turn off my computer and later rebooted it and opened iTunes! Strange... does that seem like a fix or what?

Exchange 2007: User getting meeting invitations from 3 meeting rooms

Hi,
Hope someone can help. I have an Exchange 2007 server with various room mailboxes. One user is getting meeting room invitations from 3 meeting rooms. He is not a delegate on these meeting rooms, nor does he seem to have special permissions on their
calendars. I checked a couple of persons who ARE delegates, to see if he was a delegate on them in case there was some weird looping thing going on but nothing. I also checked transport rules and there was nothing that could cause this behavior.
Anyone have any ideas, because I don't?
Thanks.

Not sure that I follow this completely. My understanding of this issue is that there are 3 or so resource mailboxes who I assume are setup to auto-process incoming meeting request. For each received meeting request, another user is receiving
a copy of the meeting request, even though he is not listed as a delegate nor are there any rules configured to send to this user.
So my understanding of the question was, why is this user receiving meeting notifications for these calendars/resource mailboxes?
But now it sounds like there is a 3rd person involved.
Are there any calendar folder permissions or settings specifically defined in any of these 3 locations (resource mailbox, user1, colleague)?
Completely remove delegates from all 3 resources & apply the change. Test to see if the problem still occurs. If not, re-add all of the users who should be delegates and test again. If they get the message again once delegates are added,
then one of those delegates might be the cause.
For PublicDelegates, open ADSIEdit and look at the Active Directory properties of each users. These are attributes on the AD object. Just open ADSIEDIT.msc, select the defaults in the Connect To window, go to the OU where the users
reside, and view the properties of the users.

Cannot migrate exchange 2013 user to another database through EMC, only powershell works?

Hi Everyone,
I'm trying to migrate a few mailboxes from a database called "primary" to "archive". I can migrate a single user through powershell, however I cannot migrate users through the GUI. When the "syncing" starts, it reverts the total
from "2" to "0" and makes it appear as though I never added any users to the batch job. The job then completes "successfully"
I can see the users in the job before I hit start. Any idea why my job goes blank?
I'm running exchange 2013 CU6

Hi ,
Thank you for your question.
We could refer to the following steps to troubleshoot:
Restart IIS to check if the issue persist.
End up of the user job to check if the issue persist.
Create a new account to check if the issue persist.
We could check relevant application log, then we could check if EAC and EMS connect to same domain controller, then we could check sync between Exchange server and domain controller.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Exchange Online users logging into OWA On Premises.

Greetings!
We are implementing hybrid Exchange Online with Exchange 2013, and we face the following situation:
When an Exchange Online user tries to access through OWA on-premises, a page appears with a link to the Exchange Online OWA.
Is it supposed to be this way?
Why the redirection is not automatic?
Seems so obvious that the redirect should be automatic that if it is to be this way (the user having to click the link), there must be some technical justification. Can anyone refer me some article about it? For to convince the top brass of the company here
that it has to be like that!
Thanks in advance !!!
Fabio Martins MCDST/MCSA Brasil!!!

Hi
As per the information and details provided by you, to solve the problem of Exchange online users logging into OWA on Premises, please follow these steps: -
The user will be able to use the
OWA URL points to the on-premises Exchange 2013 server. On the redirection page, you can choose to
save the new URL to his browser favorites and click on the URL.
When clicking on the URL, the user will be taken through the authentication process. For OWA, that means that you can try to access his mailbox in Exchange Online &
Exchange online will redirect the user to “login.microsogtonline.com”, where
you can enter UPN.
Once the UPN is entered and you switches to the password field, Office 365 will detect that the UPN domain is federation with an Office 365 tenant. This result in a redirect
to the on-premises federation endpoint (in this case sts.clouduser.dk) and depending on whether the user is domain joined and domain-connected or uses an external client, you will get
single sign-on (SSO) or be required to enter your UPN and password.
Because of the organizational relationship that was set up between Exchange Online and Exchange on-premises during the Exchange hybrid configuration lookups when booking
meetings, mail tips, etc. also work as expected from Exchange Online to Exchange on-premises and vice versa.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

When I tap the mail icon on my iPhone 4s, the menu of email servers pops up. I already have a me acct that I check all the time, no problem. So I choose iCloud, sign in and it tells me that I already have an acct-.so why can't I get to my emails then?

When I tap the mail icon on my iPhone 4s, the menu of email servers pops up. I already have a me acct that I check all the time, no problem. So I choose iCloud, sign in and it tells me that I already have an acct….so why can't I get to my emails then? I've turned the phone off and on twice....that has fixed it in the past but not this time....

all fixed ha

Exchange OWA does not load OWA for Exchange 2010 users

I have recently installed Exchange 2013 SP1 CU4 in my existing Exchange 2010 SP3 environment but when I use Exchange 2013 OWA to login Exchange 2010 users (it should automatically take the user to Exchange 2010 OWA) but I get this error message "Forbidden
403- Access is denied". However exchange 2010 users can login to their /ecp directory from exchange 2013. Exchange 2010 users can use OWA using their exchange2010/owa URL without any problems. We do not have any http or https redirection enabled
on any of the server. Also I have tried to uncheck the "Required SSL" settings for default web site on both Exchange servers but error is still same. Any help will be highly appreciated.

Hi,
According to your description, your Exchange 2013 cannot proxy OWA request to Exchange 2010 server, but ECP　request　can work properly.
In this case, Ｉ'd like to confirm OWA and ECP settings on Exchange 2013 and 2010 servers before going further:
Get-OWAvituraldirectory |fl identify,*url,*authentication
Get-ECPvituraldirectory |fl identify,*url,*authentication
Thanks,
Angela Shi
TechNet Community Support

As an exchange acct user, why am I copied when I reply to all? This didn't happen until upgraded to 5.

Similar Messages

Maybe you are looking for