When I bookmark a new page, Firefox gives me a bookmarks menu which has only thfe first four o my directories listed (plus "unsorted bookmarks" and "choose" ).
When I select "choose" I get only "unsorted bookmarks" and "bookmarks toolbar" to choose from. I am able to bookmark the page under "unsorted bookmarks" and then later copy it to the directory of my choice, but this is a round-about-way. How can I get the complete list of my directories to appear when I want to place a new bookmark in the proper category, without having to first file it in the "unsorted bookmarks" directory?
If you do not see the Bookmarks Menu folder where the other bookmark folders reside then you may have a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
Similar Messages
-
I used to be able to click "File" and "close tab" to close a page without closing a website. For a few weeks after the last Firefox update, I had to hit "exit" and that worked the same, but now it closes everything. Very irritating and time-consuming.
How do I close just the one page/pdf/document that I am looking at without closing out the website or my browser altogether?See this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
See also http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]
[[How to set the home page]]: Firefox supports multiple home pages separated by '|' symbols -
i duplicate current pages by create new windows on a very frequent basis;
to do this, i go to the top of the page that i want to duplicate and right-click and click on Open Link in New Window;
I specifically want to duplicate the page i am on in another Window, not a new tab;
Because
Duplicating the current page to Open Link in New Tab, gives tabs on the top of my screen;
Duplicating the current page to Open Link in New Window, gives 'tabs' on the bottom of my screen;
I want 'tabs' to show on the bottom of my screen and to do that i have to Open Link in New Window;
My question and What is happening, is that firefox is yanking me back to the page that i have just duplicated by right-clicking at the top of the page and clicking on Open Link in New Window;
When i create the new Window, firefox yanks me back to the page that i just duplicated and i dont want to be yanked back to that page;
I want to stay on the page that i just duplicated.
I have tried changing the way tabs work in Options but nothing checked or unchecked results in the specific way i want to have new Windows open and STAY on that newly created Window and not be YANKED back to the window i duplicated.The original window did not have a Flash object, but does the window that hides itself contain a Flash object? That is the usual pattern for this bug in the plugin's protected mode feature.
If you have not already tried disabling it, the following pages/posts provide different ways to do that:
* Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
* Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078
Flash needs to completely unload from memory (restarting Firefox might help) before this would take effect.
More history: [https://support.mozilla.org/questions/955659 Opening New Windows and Shockwave Flash] -
When I load Firefox, the default search engine goes to AVG Search. I'd like to change it so that the default search engine on the search bar is Google. In addition, when I one a new page, the new page home page defaults to AVG Search. I'd like opening a new page to default to Google. My initial home page goes to the Wall Street Journal, which I want to keep, but want to change for the search bar and when a new page is opened to Google.
See:
* https://support.mozilla.org/en-US/questions/810780#answer-185599 -
When I create a new tab, firefox shows a new window.
When I create a new tab, Firefox shows a new window. Please tell me to solve this problem.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You should update your outdated Shockwave Flash 10.3 r181 plugin.
*https://www.mozilla.org/plugincheck/
You can find the latest Flash player versions for Firefox on this page:
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html -
When I use the new Pages app. On my IPod to type documents, I can't open them on my new computer. It sends me a message that I have to download a newer version of pages to see the Pages document. When I try to do that it tells me all my apps are up to date and will not allow me to upgrade the pages on my iMac.
Any suggestions?What level of OS X is installed on your Mac (your profile is incomplete)?
Barry -
InDesign CC crashes when i adding a new page
Hi together!
When I adding a new page InDesgin CC crashed. I tested it on two PC with Windows 7 and Windows 8. I also created a new document. Always the same problem when adding a new page. Can anyone help me?
Regards
ChristianHaving similar problem for second time (different files, different content) in the past two months.
Using IDCC2014 (10.2.0.69) on Mac OS 10.10.3.
When inserting a new frame (whether a newly placed image or an empty frame) with text wrap, text reflows (as expected) but InDesign quits (no warning or error, it just quits).
Inserting a new page and reflowing text also causes ID to quit.
Finding earliest page in document where the problem begins (similar to above reply; in my two cases that is p. 2 and p. 23) and deleting the text frame on that page causes ID to quit.
I work on quite a few books with many elements, but the files in question are just straight text with page numbers (not even running heads) and some illustrations to be inserted.
Saving as IDML does not resolve the issue. Trashing preference does not resolve the issue.
Dragging pages to a new file does not resolve the issue. But if text is copied-and-pasted into a new file then that new file will work fine.
The problem is consistent at various work stations across three different locations/networks.
The only fix has been to delete ALL of the document pages from the affected area on and do the work again, i.e., redraw new pages and apply the chapter opening master pages again. Deleting just the first page where problem is found or the first two pages where problem is found or first four pages where problem is found, etc., causes ID to quit.
In the case of this second file (I don't have the first file onhand right now), it does not have a long save history; it's not from a legacy template file or something like that. Cracking open the IDML file confirms only four saves beyond the initial creation and all in IDCC2014.
Anyone else coming across this problem? Any suggestions? -
I have a site published that i need to change, but when i publish the new pages it dosen't change the old site.
See if this helps you any further :
The concept of Sites in iWeb
Also, clear the browser cache and reload the page(s). -
I do not want to have to choose these two controls or tools in InDesign each time I open a new page or doc. How can I make them open automatically?
With nothing open, try pressing the tab key, and/or resetting the workspace.
-
how do I stop the sound (bong) when i receive a new email even though my settings are set to vibrate only?
Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.
You can check the properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Command+B on Mac).
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
Make sure that "Load this bookmark in the sidebar" is not selected. -
When i load a web page it some times says sorry fire fox has stoped workin
when i open a web page some times it says that fire fox has stopped work and i have to close the web page and it happens over and over again even if i restart my computer or shut it down it works on your sit though please help
stop use it. 1st. if it only happens to some one or two specific website, don't go there with firefox, maybe I.E.7/8/9, or try another 3rd party web browser like google chrome 10.x
-
I got my computer reset and my iTunes deleted. I still have everything on my iPod Touch but when I downloaded a new iTunes on my computer everything was deleted. How do I get everything in my iPod back to my iTunes and into my computer?
I just need everything back in my iTunes library on my computer. Help! Please!See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.
Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"
*Select : [X] "Remember search and form history"
See also:
*https://support.mozilla.org/kb/Form+autocomplete
<i>[locking thread due to the age]</i>
If you have further questions then please start a new thread.
*[[/questions/new start a new thread]] -
I am trying to create a panorama. When I enter FILE > NEW > the Photomere panorama option does not appear. the only options are Blank file and file from clipboard. This is in Elements 11 on Windows 8.1 OS. How do I get Photomerge Panorama to appear.
Since PSE11, you access the photomerge option in the 'Enhance' menu, last option. Or you can use the organizer (menu Edit / Photomerge).
-
On click of lov new jsp page which has only text area for adding comment
hi all ,
please help me to do this task. on click of lov new jsp page should be opend which has only text area for adding comment and upon clicking submit on the jsp page the value entered on the textarea should fall on the text field of lov.
with regards
prabhakaran.pThe only reason I see for such a requirement is "Notes" require more space for entering a detailed note and would be inconvenient to write it in small single-line text input box. But, still in this case, getting the entered text back to the page and displaying it will have the same inconvenience of reading it from that field. And, I still think that removing one amongst the two (text field or image link) would be good, design wise.
Anyway, did u try the following:
1. Add a flow layout to the table bean
2. Add text input and image item to the flow layout.
3. Attach the notes page as the destination uri for the image.
Did u start the working on it, let us know how far did u reach so that we can guide you through from that point.
Maybe you are looking for
-
My books are no longer in the iTunes library on my MacBook Pro. They are not in my iBooks, either. I had over 200 books in my iTunes library, all synced to my iPad 2. I deleted them from the iPad as I read them, knowing I still had them in iTunes. Th
-
Vendor Master and Customer Master for FI AP/AR
hi FICO Gurus, I am Sapna here and I have questions regarding the Mandatory fields for Vendor Master and Customer Master which would be mandatory for Running FI AP and AR. I am basically a MM Consultant but I have been asked to perform this role of M
-
Remove custom label in maveriks contacts
I did some custom labels on iPhone. And now I cannot delete them, not on iphone (ios 7), not on macbook (mavericks) and even iCloud web interface could not help me.
-
Can I remove process version warning in LR4?
I work in a studio where we use a DNG workflow - delivering DNG files to prepress. We are currently upgrading to LR4 to support some new cameras. Long story short, our prepress provider is using PSCS5 (and ACR 6.7) which means we'll need to keep our
-
Photo Syncing [iPhone 3GS iOS4]
Can anybody please help me on my problem? Before I upgraded to iOS 4, my photos are sorted by file name.. (Actually, I like it this way) But now, since updating my iTunes/iPhone OS, it seems that my photos are sorted by "date taken"... (I dont like t