When i login to sql plus i get messege "ORACLE not avelibale"

and then i check the the services ,and oracle service
is in status "starting" insted of "start" and the
buttons "start" or "stop" are in gray,
then i stopped oracle process from the task menager,
and went back to the services and what a relief the
button "start" was avaliable ,so i clicked on "start"
and the status had changed to "start",
i went back to logon and happily i loged on succesfully,
but when i close my computer and open it again,
and try to logon the problem returns again....(the status
is "starting")
(i have windows 2000 profesional)

Similar Messages

Can I use username = system when I log into SQL plus?

I am new to Oracle and SQL plus and I have some questions to ask?
I managed to get SQLPlus working using sqlplus system/password
When I installed Oracle I created a database called ORCL and set a password. My question is when I am using SQL Plus is it OK
to use username= system. The problem is that I created 3 tables in this database but when I list the tables I get about 181 tables returned.
It seems that I have logged into the master database.
In fact I just used the password I set when I installed Oracle (not the @asi past)
from:
http://docs.oracle.com/cd/E13212_01/wles/docs42/installadmin/database.html
Configuring an Oracle Policy Database
To configure an Oracle policy database, you must create the policy database, create a security role and a user, and grant the security role and user access.
To configure a policy database, perform the following steps:
Open a command window, run the Oracle SQLPlus utility, and login as user SYSTEM with the password you set for that user account when you installed the Oracle database software.
sqlplus system/password@asi
where: password is the password you set for the system account when you installed the database software and asi is the database instance name.
The name of the database I set up when I installed Oracle was ORCL.
I can set up a data source using WebLogic Server Administration Console using the following data:
Database name:             ORCL
Host name:                      localhost
Port:                                 1521
Database USer Name:   System
Password:                        the password I set when I installed Oracle
This is different form the book I am using where the writer used the database name XE as in the following:
Database name:             XE
Host name:                      localhost
Port:                                 1521
Database USer Name:   OE
Password:                        .......
Confirm Password:        .......
Anyways I managed to create some tables using SQL script. I assume these are in the ORCL database.
SELECT TABLE_NAME FROM USER_TABLES will list all the tables in the database.
Apparently there are a lot more tables in this database (181 tables) than I thought. I have only created 3 tables.
Article
Section
Edition
Is this how it should be?
Also I am trying to create another table Catalog but SQLPlus is not allowing me to do this!
ERROR at line 1:
ORA-00955: name is already used by an existing object
Next I create an EJB project using Eclipse (Oracle Enterprise Pack for Eclipse).   Then
I add a JPA (Java Persistence API) project facet. In this I specify the following:
SID:                         ORCL
Host:                       localhost
Port Number:       1521
User name:            System
Password:               The password I set when I installed Oracle.
Here there is a GUI called Select tables which gives a list of tables I assume the same list of table
I had listed in DOS however there appears to be more tables here.
Anyways, I am just wondering am I on the correct path and would this Database I am using be the
ORCL database. Would all these tables be tables that are in the ORCL database?
Thank you in advance for your help.
Brian.

Hi Shannon,
Thanks for visiting Apple Support Communities.
You can sign in to another iTunes Store account on your Nan's iPad by following the steps in this article:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Best,
Jeremy

Login Error SQL Plus in Oracle9i

I installed completely Oracle9i on my system. I have to make databases, make forms and generate reports for my scool project. I cannot login to sql Plus using scott tiger . I think the problem is with HOST STRING. Can anyone help please.
Thank you
Sharif Vohra

it would help if you post the error message(s), if any, that you are receiving while connecting.
Did you install the database part (or the client tools only), and did you also create a
starter (or customized) database while installing Oracle?

How to find GUI SQL*Plus command tool in Oracle 8i (version 8.1.7)

I had installed Oracel 8i Enterprise Edition (version 8.1.7) on my server machine (Windows NT 4.0), I'd like to use Oracle Navigator (GUI SQL*PLUS command tool), but I can not find it from the menu. I know Oracle Navigator is available in Oracle 7. Can anyone tell me where and how to use GUI SQL*PLUS command tool in Oracle 8i Enterprise Edition (version 8.1.7) ?
thanks a lot.
David Zhu

Hi
Oracle Navigator is part of Personal Oracle7 and Oracle Lite. I don't know is it available in 8i Personal Edition but I am sure that it is not part of Standard and Enterprise Edition.
Regards
null

Which version of SQL*Plus can connect to Oracle 8i Database?

Which version of SQL*Plus can connect to Oracle 8i Database?
I would like to know which version of SQL*Plus can connect to Oracle 8i Database?
Where can I download it?
(I have tried SQL*Plus version 11 and the program said it does not support the connection to Oracle 8i Database)
Thank you very much!

By the way, what's your 8i database release version
SQL> select * from v$version;
Any SQL*Plus of 8i can connect to 8i Database.
Only SQL*Plus of 9.0.1 can connect to 8.1.7 and 8.1.6 Database
Only SQL*Plus of 10.1.0/10.2.0 can connect to 8.1.7 Database
Absolutely NO SQL*Plus of 11g can connect 8i databases
Regards,
Sabdar Syed,

When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.

When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.
== This happened ==
Every time Firefox opened
== I tried to download firefox. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS-RTC LM 8)

When you click the download link on [http://getfirefox.com GetFirefox.com], you should be asked if you wish to Run or Save the file. If the described situation happens when trying to Run the download, try instead to Save it and put the file on your Desktop or a similar place where you are certain that you can find it again.
When the download is complete, try double-clicking the downloaded file in the normal Windows Explorer (browse your way to the file from My Computer). This should start the installation.
If you notice in the Explorer window that the file seems to be lacking the Firefox orange/blue icon, rightclick the file and select Properties. The picture should look somewhat like the attached picture (except that mine's in danish, but that is irrelevant) if saved correctly - if it does NOT look like this, please describe the contents or attach a screenshot of the box. Especially what it says under "File type" - it should be "Program"; if it's not, we'll have to look into what the problem could be here.
Slightly off-topic, your Internet Explorer seems to be quite a bit out of date (IE 6, where current version is IE 8), so I would strongly recommend that you try to run Windows Update to get your system updated. If this is a company system (like a Terminal Server thin client machine), this may not be possible, and your system administrator will most likely have to help you.

Refcursor not returning rows when called from non SQL*Plus IDE or other

Hi all,
I have a very weird problem.
We have recently performed a minor upgrade to our oracle database and are now using:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE    10.2.0.5.0      Production
TNS for Linux: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
5 rows selected.We have a crystal report selecting data from a refcursor returned by a stored procedure.
The stored procedure updates data when called as well as returning the refcursor in question.
Observe the following test scenario executed in SQL*Plus:
SQL> create table testtab (teststr varchar2(100));
Table created.
Elapsed: 00:00:00.00
SQL> insert into testtab values ('X');
1 row created.
Elapsed: 00:00:00.00
SQL> create or replace procedure testtabproc (p_listcur in out sys_refcursor)
2 as
3 begin
4
5     open p_listcur for
6        select *
7          from testtab
8         where teststr = 'X';
9
10
11     update testtab
12        set teststr = 'Y';
13
14        commit;
15
16 end;
17 /
Procedure created.
Elapsed: 00:00:00.00
SQL> declare
2
3 v_list_cur sys_refcursor;
4
5 type t_out_rec is record (teststr varchar2(100) );
6
7
8
9 v_out_rec t_out_rec;
10
11 v_rec_count   number := 0;
12 v_count_limit number := 10000;
13
14 begin
15
16 dbms_output.put_line('about to call proc');
17
18 testtabproc(v_list_cur);
19
20 dbms_output.put_line('about to fetch records');
21
22 fetch v_list_cur into v_out_rec;
23 while v_list_cur%found loop
24     v_rec_count := v_rec_count + 1;
25     if v_rec_count <= v_count_limit then
26       dbms_output.put_line(v_out_rec.teststr);
27     end if;
28 fetch v_list_cur into v_out_rec;
29 end loop;
30 dbms_output.put_line('complete. selected '||v_rec_count||' records.');
31
32
33 end;
34 /
about to call proc
about to fetch records
X
complete. selected 1 records.
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.00
SQL> select * from testtab;
TESTSTR
Y
1 row selected.
Elapsed: 00:00:00.00
SQL> as you can see, the cursor returns data and the table is updated.
now, our problem is with crystal and also when I use the same test case via another IDE like TOAD.
No data is returned from the list but the table is still updated.
We suspect that something is happening that is causing the table to be updated before the refcursor is opened, or at least before the predicates are applied.
has anyone else encountered this problem before?

Tubby wrote:
WhiteHat wrote:
nope - it works from sqlplus itermitantly (i.e. we always get the debug output but the cursor only sometimes fetches the rows).
it is almost as if the commit is being executed before the cursor is opened.
I still havn't been able to reproduce it except with the actual scenario that I am working with...Is the code you are dealing with exactly the same as the skeleton you've posted in your original post? Do you perhaps have a generic exception catcher in there somewhere (perhaps catching and hiding an ORA-01555) when the cursor is being fetched?
Not that i expect it to make any difference, but i'm curious as to why you've declared your cursor as IN / OUT ?
p_listcur in out sys_refcursor
the code structure in the real example is almost identical to that test case I produced - the exception handler is only catering for no_data_found, all other errors should be raised as normal.
edit: sorry I forgot to add - it's in/out because apparently that's what crystal reports needs in order to use the refcursor..... I'm not a crystal guy so I can't be any more specific than that sorry......
Edited by: WhiteHat on Oct 11, 2010 9:34 AM

Special character when changing password in sql plus

Hi i'm having a problem with setting password for user's in sql plus. I get a ORA-00922 whenever I try to change a user's password to contain ! in it. See below. Do I have to escape special characters or something or this a bug?
(Previously I've always used Enterprise Manager for this and can set ! characters for password without issue but we're currently having an issue with it and I need to alter passwords in sql plus while I'm waiting for it to be fixed )
SQL> alter user lbtest identified by oraclesux!;
alter user lbtest identified by oraclesux!
ERROR at line 1:
ORA-00922: missing or invalid option
SQL> alter user lbtest identified by oraclesux;
User altered.
System and O/S details below:
O/S = MS Server 2008 Standard Service Pack 1 64 bit
Oracle 11g Standard Edition (11.1.0.7.0)
SQL> select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8MSWIN1252
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 11.1.0.7.0
20 rows selected.

Found the answer here, must user double quote for exclamation marks but not other characters like #.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:897930000346894755

No task bar/menu bar or icons appear when I login into my main account, however this is not a problem with my guest accout

So was trying to use install disk ! to solve the problem but did not want to reinstall the system because I have not backed up many of my photographs. Then the disk got stuck and would not come out so when I shut down and restarted I could not get past the gray screen. Well I was able to solve the problem and remove the disk, and finally it would load to the login screen, although it took some time to get there. Then when I log in to my main account the desktop will load but the task bar and icons will not its completely blank except for the wall paper. When I login into my guest account there is not a problem everything is there and functional. I've been researching but have had no luck on a solution. Thank you for your help.

Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

SQL Plus command line: Arrow keys not giving previous commands back

As in tittle, I'm using sqlplus on Windows XP and OEL 5.5 and I can use up,down arrows in Windows to select previous command but I can't do it in Linux.
My DB is 11gR2 on OEL 5.5 .

Hi,
Sorry, I don't know anything about Linux. The up-arrow feature on Windows seems to be provided by the operating system, not by Oracle. I would guess it's that way on Linux, too.
In Windows, there's one more thing that affect this: Properties -> Options -> Command History. Perhaps Linux has something similar.
In Windows (not just SQL*Plus or Oracle programs) if you right-click on the title bar at the top of a window, uyou get a small drop-down.
If you select the last item, "Properties", you get a small window with 4 tabs, the 1st of which is "Options".
On that "Options" tab, there are some settings for "Command History", oncluding Buffer Size. That seems to be the number of old ommands it will keep. You can set it to 0, but that seems to still keep 1 old command available via up-arrow.
Sorry I don't know any more.

HT201269 I used iTunes to backup up my iPhone 4 version 7.0.6 bought a new iPhone 5 and when I connect the new phone I get "iTunes could not connect to this iPhone. You do not have permission." How do I fix this issue?

Itunes 11.1.5
Mac OS X 10.7.5
IPhone 4 7.0.6
IPhone 5 7.0.6
Ikeep getting this error when I attach the new phone. After it would not work I did a Icloud back up of my old phone and restored it on the new phone, but I have other music and apps on my Itunes that I would like the option to sync and I like to be able to backup my phone on my Mac. What do I need to do to get the new phone attached back to this itunes?
iTunes could not connect to this iPhone. You do not have permission.

Im having the same problem after installing ios7.1
Checked the usb status and it sees an iphone ( 4s ) attached,
Repaired disc permissions
updated and reset iphone
and itunes
reinstalled mavericks from scratch
phone alert saying " TRUST THIS COMPUTER?"
hit trust
same alert keeps appearing
again and again
itunes keeps wittling on about "iTunes could not connect to this iPhone. You do not have permission."
what the actual F*** is going on and can anybody help ??????

SQL*Plus Worksheet in Personal Oracle 8.1.6

Why does a select query in SQL*Plus Worksheet not return any results, but the same query in SQLPLUS or TOAD does?
I am using the version that comes with Personal Oracle8i for NT (Oracle 8.1.6). Version of Enterprise Manager is 2.1.0.1.0.
Database is Oracle8i Enterprise 8.1.5.

What is the query you have given?
Is it happening for all the queries or only for this one.
Please reply.
Regards
Ravi

HT1349 What to when trying to download an app and get message "could not sign in, An unknown error has occurred"

What do you do when trying to download an app from App Store and get message: "could not sign in, an unknown error has occurred."

Sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try again.

TS1436 When trying to burn a cd I get "disc recording not found" why and what can I do

When trying to burn a cd I get "recording not found". Why and what can I do to change this. I do have Windows Media player loaded tried to to burn on that also but did not work.

I have the same problem as simtagman. Would you mind looking at my diagnostics?
Microsoft Windows 7 Home Premium Edition (Build 7600)
Dell Inc. OptiPlex 745
iTunes 11.0.1.12
QuickTime not available
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00**********DA0
Current user is not an administrator.
The current local date and time is 2013-01-30 20:37:00.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel Corporation, Intel(R) Q965/Q963 Express Chipset Family
Intel Corporation, Intel(R) Q965/Q963 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.1.12 is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D: SONY DVD-ROM DDU1615S, Rev EDS3
Audio CD in drive.
Found 12 songs on CD, playing time 47:22 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:58:33
Track 3, start time 08:07:13
Track 4, start time 11:52:03
Track 5, start time 17:18:13
Track 6, start time 20:39:28
Track 7, start time 23:42:71
Track 8, start time 28:40:61
Track 9, start time 32:44:72
Track 10, start time 37:00:26
Track 11, start time 40:09:35
Track 12, start time 43:05:43
Audio CD reading succeeded.
Get drive speed succeeded.
<Edited by Host>

SQL *PLUS white interface in Oracle 11g XE

I want the white interface of SQL PLUS in Oracle 11g Express Edition. Here is a image link of the SQL PLUS interface.
[SQL *PLUS|http://www.oracle.com/ocom/groups/public/@otn/documents/digitalasset/498689.jpg]
Please help me.
Edited by: user13084595 on Sep 30, 2011 8:19 PM

This is really not the place for windows questions, so try to google it:
http://lmgtfy.com/?q=customize+command+prompt+window+site%3Amicrosoft.com
From Run... or existing command line one could use argument to cmd.exe, or the built-in color command. Example:
C:\Users\Public>cmd /T:F0
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Public>color 0F
C:\Users\Public>color F0
C:\Users\Public>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Sat Oct 1 14:18:57 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL>Edited by: orafad on Oct 1, 2011 9:52 PM

When i login to sql plus i get messege "ORACLE not avelibale"

Similar Messages

Maybe you are looking for