When i plug my headphones in i can barley hear the singing?

When i plug my headphones in i can barely hear the singing? And ive tried resoring my ipod and everything.

Some questions for you:
Have you made sure that the headphone jack is fully inserted into the iPod Touch socket?
Presumably the volume control is set properly?
What make are the headphones?
Have they worked before with the iPod?
Do they work on any other devices?
Have you tried any other set of headphones with the iPod Touch?

Similar Messages

My balance sounds horrible when is at the center ... it only happen when I plug my Headphones... if a move the balance to the left/right i have a mono sound in my headphonesleft/right

My balance sounds horrible when is at the center ... it only happen when I plug my Headphones... if I move the balance to the left/right i have a mono sound in my headphones left/right

I too am experiencing this issue after upgrading to Mavericks. Headphone audio balance seems to always stick to the far right. When moved to the center, it still only outputs sound to the right side. I have to constantly adjust the setting a little to the left of center for both sides to output sound equally.

I have an IPhone 4S and am using the Phonak Icom with my hearing aids. All works well except for when I get an incoming call I can't hear the ringing/ringtone in my aids. Any solution?

I have an IPhone 4S and am using the Phonak Icom with my hearing aids. All works well except for when I get an incoming call I can't hear the ringing/ringtone in my aids. Any solution?

Did you get any answers?

I have an ipod touch 4th genereation and have problems when i record you can barley hear the voices and sounds recording i don't know what the problem is?

i have an ipod touch 4th genereation and have problems when i record you can barley hear the voices and sounds recording i don't know what the problem is?

sounds like ur ipod's mic is blocked with something check the back on the ipod near the back camera

There is no picture in Premiere Elements 10 when I am in editing mood, I can only hear the sound.

I have been edeting in Photoshop & Premiere Elements 10 for a long time. Now, today there is now picture in Premiere!!! I can not solve this, I have tryed everything. (Windows 7/64, Intel Core i7-2600 k/3.40 GHz, NVIDIA GeForce GTX 570)
What is the problem?

The only problem with your assertion is that Adobe released PrE 10, which worked with the nVidia (and ATI) drivers, 3+ years ago. It was only with a recent nVidia driver release, that problems were noted. Since PrE 10 has been out of development for some time, they are not likely to rewrite things, to accommodate a newer, but flawed nVidia driver. I only hope that nVidia is able to discover what the issue is, with their new driver, and correct that, with a later release.
Similar happened about 4 years ago, but the issues were not just with a version of one Adobe program, but most Adobe programs, across the board. It took about a month to track down the problem, and in that time, a second "problem" nVidia driver was released. By the time that both the cause and the fix were worked out, nVidia had a third driver release, that fixed things. Back then, the issue was two 3D nVidia modules, that were being turned ON, with the default installation. With the release of the third successive driver, nVidia set those to OFF - which was also the "fix" with the two previous drivers - turn those modules OFF.
I was only pointing out that using a simple player's capability vs an editing program's, is not as iron-clad a test, as it might seem at first. There are major differences in how those program types interface with the video driver.
Hunt

Sound is messed up. I can't hear the singing well at all.

The beats and instrumentals come in well but everything else, especially the vocals, are not coming in right at all.
If anyone has any tips or information I would really appreciate the help.
Thanks.

The exact same thing has just happened to me last night. The earphones work, the EQ does nothing, the music is fine on the computer and I have been the whole way through the 5 Rs.
J

Upgraded to IOS 7 when I put my headphones in it gets all crackly and I can't hear the voice but without headphones it works just fine

When I put my headphones in it gets all crackly and I can't hear the singing but when there's no headphones in it works perfectly fine

It could be bad headphones. Try another pair. It could be gunk in the headphone jack. Try cleaning it out. It could be a bad headphone jack. Make an appointment at the Genius Bar at your local Apple Store.

I cannot hear the caller's voice when I receive a call. I can only hear them when I turn on speaker phone. What can I do?

Even if I have a good signal on my iphone 4 I cannot hear any sound when I answer a call. I can only hear the caller's voice when I press the speaker phone button. Please help as have fiddled with setttings to no avail and taken out SIM card and restarted. No joy. Thanks.

I have the same problem.. I am seeing any solution in other forums.. But lot of people seem to have the same problem

When i make calls, all i can hear is static, and when i plug in headphones or turn the speaker on, it still doesnt work. but facetime, music, an apps sound still work. help? iphone 5

when i make calls, all i can hear is static, and when i plug in headphones or turn the speaker on, it still doesnt work. but facetime, music, an apps sound still work. help? iphone 5

Hello Delaney1130,
It sounds like you are getting static on both the receiver and the speaker when you make a call. I would use the troubleshooting from the following article to help resolve the issue named:
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling

I have an iphone 4, when I plug in headphones I can pick up music and only background sounds, but no voices. It happens on every video or movie I see, but music works perfectly fine. Did anyone else have this problem or was it just me?

I have an iphone 4, when I plug in headphones I can pick up music and only background sounds, but no voices. It happens on every video or movie I see, but music works perfectly fine. Did anyone else have this problem or was it just me? If not can anyone help me?

Hey there Srkupo,
It sounds like your vocal audio is not working with your headphones connected to your iPhone. I would start with the troubleshooting from the following article to help troubleshoot them named:
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/ts2634
Update your software
Install the latest version of iOS. You can see which version is on your iPhone by going to the About screen.
If the device doesn't update successfully, the issue might be with your device and not the accessory. Learn how to check your iPhone, iPad, or iPod touch.
Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
If this does not resolve the issue could you elaborate on where you are listening to this content from to help isolate the issue?
Thank you for using Apple Support Communities.
All the very best,
Sterling

Why does my 3rd Gen iPod Touch still play through the speaker when I plug my headphones in?

When I plug my headphones into my iPod, it plays through them, but it also continues to play through the built in speaker. Does anyone know how this can be fixed? Thanks

- First see if it woks OK with another pair of headphones.
- next, to rule out a software probem:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup
- Restore the iPod to factory defaults/new iPod
If still problem you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order. It is liklely a problem with the headphone jack i the iPod. There are third-party places that will replace he jack.
DigiExpress.us - The iPad Repair Professionals

Suddnely when I plug my headphones in, there's no output aound

I don't know what's happened, as one minute it was working, and the next it wasn't, but now when I plug my headphones into my computer, there's no sound coming through. I hadn't changed anything beforehand. I have subsequently gone through system pref's to see if anything has changed, but can't seem to find the source of the issue. Also, my mouse suddenly stops working in itunes to scroll through track lists etc. HELP!

have you tried more then one pair of headphones? Is the headphone connector the correct size 3.5mm (1/8 inch)?

When I plug my headphones into my Ipod touch and listen to music, the volume automatically reduces slowly so I cant hear anything.

When i plug my headphones into my Ipod touch and listen to music, the volume automatically reduces slowly so I can't hear anything. Please help.

Thank you. That is good information.
Does this mean that there is nothing I can do about the delay? When I think of a delay, I think of maybe 10 seconds. I am having to wait for a minute or more for my audio to switch. While I wait, I have no audio and any audio program hangs. Is there a setting I can change? It seems rather ridiculous that I have to wait so long just to switch from internal speakers to headphones.
It is like this on other Mac machines? Or it is just my iMac? I hate to compare Mac to Windows, but on Windows or Linux computers the switch is instantaneous.

Email noises when I plug my headphones in??

When I plug my headphones into my Macbook Air the laptop starts making noises like emails are coming through. If I shut down my Outlook and iTunes and any other things that are open then it usually stops. Any ideas???

i have the same or similar problem, iam really not sure about this - sounds stupid but it feels more like it plays the same "melody" when i plugin the headphones after some time (hours/days). like 4 times "new mail" 2 times "sent mail" + 1 "new mail". Very strange. I can not reproduce the sounds by unpluggin and pluggin the headphones again even if i get or send mails in between.
MacBook Pro 15", 2,1GHz Core2Duo
Mac OS X 10.7.3

When I plug my headphones in the my laptop I still have sound from my speakers and headphones

Hello, I'm having trouble with the sound on
my laptop and it's only just started to happen.
When I plug my headphones in the my laptop my speakers don't get muted, So I
have sound from my speakers and headphones at the same time.
I've reinstalled the drivers and this didn't work, So I'll hoping you can help me.
HP Pavilion g6 Notebook PC, Product number A8M62EA Windows 7 64-bit

Here's the trick (and it's been verified on 3 other Win 7 systems):
1) R click on your speaker icon, select 'Recording Devices' (if you have the sounds dialog up, it's the 2nd tab 'Recording')
2) R click in the white space, be sure that BOTH "show disabled devices" AND "show disconnected devices" are checked.
3) **Now this step is going to take a little bit of thought for each computer being used: on my laptop (HP Elitebook) I get a device "Stereo Mix", ENABLE this device.
4) Click on Properties, go to the tab 'Listen'
5) Check the box "Listen to this device", also change the drop-down box below "Playback through this device" to be your second audio device
-- To verify that you've done this correctly, go back to the Sound dialog tab Playback, you should now see both of your audio devices showing the little green graphs moving.
Here are the specific settings that I have on my laptop, maybe this will help with your settings:
Speakers- GN9350 (Default Communications Device)
Speakers- SoundMAX Integrated Digital HD Audio (Default Device)
Stereo Mix- 'Listen' feature points this device to my GN9350 headset.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

When i plug my headphones in i can barley hear the singing?

Similar Messages

Maybe you are looking for