When i run labview6.1 on my pc with windows the "DAQ Solution " was gary doesn't work i don't know why ?i don't have a daq board card is that a reason? i want to know what should i have to use labview in data acquisition?

i am using a platform windows 98 ,and labview 6.1
thanks in advance

With the NI-DAQ driver, you can build VIs, but you can not acquire data until you have a Data Acquisition card. You can get these from National Instruments over the web or by calling.
J.R. Allen

Similar Messages

When I plug my iPod into speakers or earphones, the left speaker or earphone doesn't work

When I plug it into speakers, the left speaker doesn't play anything at all. When I plug it into my earphones, the left earphone plays really low music, static, and REALLY loud bass. My speakers and earphones both work fine with other devices. Any advice?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

When Firefox tried to recover my two crashed windows, the first one was fine, but the second one only shows blank tabs, though their number is correct.

Just as it says in the description. I've looked through solutions for similar issues, but to no avail.
A funny thing is that in the "restore tabs" window that appeared after I tried to start Firefox again, it listed a number of my tabs among other blank tabs (of course they were not originally blank). None of these actually showed up, however. Confusing.

HI toothandclaw,
When you restored the window and clicked on the tabs that were blank, did the page show up? It could be that you have the do not load tabs until selected preference on. This can be changed in the Options/Preferences Menu.
However since the session is blank, it could also be that Firefox did not close properly because of a crash or a force quit. How did you quit Firefox before the session looked like this? Could you also show a screenshot?

HT202157 With Netflix I get a message that content requires HDCP for playback. What should I do

On Apple TV using Netflix I get a message that content requires HDCP for playback. What should I do

Are you using an HDMI to HDMI lead or some kind of adapter for HDMI?
Try a different HDMI lead or socket.
Unplug and restart the AppleTV and also power the TV on/off.
HDCP is a digital copy protection system - AppleTV doesn't like some aspect of the connection so is refusing to play - the lead/socket could be dodgy or AppleTV/TV circuitry.
AC

I recently bought an ipad 2 and wanted to use all the apps on my iphone4 on my ipad but have been charged when I use my apple id. What should I have done to share the apps?

I recently bought an ipad 2 and wanted to use all the apps on my iphone4 on my ipad but have been charged for the first app I downloaded when I use the same apple id. What should I have done to share the apps and should I have been charged? 2 months ago when I got a new iphone, i was told in order to get all my apps back as I hadn't backed up my files, if I used the same apple id I would 'purchase' the app, but then would not be charged as apple would recognise that I have already purchased the app. That worked, but when I did the same thing on my ipad 2 using the same apple Id, I was charged... what should I have done and is this right as I thought the whole point of having multiple apple devices was I could share apps between devices. please help! thanks.

Using the same Apple id and Password you should be able to download purchased apps without being charged again.
I download to an iPad/iPad2/iPhone3 & iPhone4 with no problem.

Hi I need help. Does anyone knows joel brotonel? I bought an iPhone from him because he said he is working in apple warehouse. He tricked me. I just want to ask what should I do to get my money back?

Hi I need help. Does anyone knows joel brotonel? I bought an iPhone from him because he said he is working in apple warehouse. He tricked me. I just want to ask what should I do to get my money back?

thanks for advice but my problem is im far from him, i just met him online he has gained my trust. i dont know where can i complain. or to whom should i complain.

So someone took my ipod 4g and who ever took it turned it off and i dont know how to find it and i really want it back, what should i do?

so someone took my ipod 4g and who ever took it turned it off and i dont know how to find it and i really want it back, what should i do?

lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

I want to open a folder in a separate window by clicking on it. For some reason when I click on a folder it just replaces the one I was just in. I want them both to be open at the same time without having to go through several steps.

I want to open a folder in a separate window by clicking on it. For some reason when I click on a folder it just replaces the one I was just in. I want them both to be open at the same time without having to go through several steps. Old apple operating systems made it easy to have several folders open at one time.

Eric, thanks that works but seems like an extra added step also to do it that way. I've got to move and organize a ton of files and I'm looking for a easy way to get this done. I could also open the folder into a separate tab and then drag the tab out so it becomes an open window but thats a lot of fussing around also with extra steps. Not sure why these newer operating system seems more confusing and less user friendly than what they used to. In the past I could just click on any folder and it would open in a separate window making it really easy to copy or move files from one place to the other just by simply dragging them from one window to the other. Seems like I'm going through several extra steps now to do a simple task.

I have i phone 5 Model number is MD298B/A i want to know what its have features like 4G Supports.

i have i phone 5 Model number is MD298B/A i want to know what its have features like 4G Supports.

Your model is A1429 GSM, covering LTE bands 1, 3, and 5. The only carrier in Sri Lanka that has LTE that Apple supports is Dialog. Check with them if it's compatible.

Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I have a problem with Safari: when it opens and I go on google, it opens a page that says: PLEASE UPDATE INTERNET EXPLORERE. What should I do?

I have a problem with Safari: when it opens and I go on google, it opens a page that says: please update internet explorer!
What should I do?

It's a scam. Have a look at this thread:
https://discussions.apple.com/thread/6058094?tstart=0

I should have said in my previous message that the iphoto program I am using is for an ipad 2. I simply want to know how to delete an edited album which contains one photo that I do not want taking up space.

I should have said in my previous message that the iphoto program I am using is for an ipad 2. I simply want to know how to delete an edited album which contains one photo that I do not want taking up space.

OK....I'm stumped. The message you are seeing is typically there to protect someone from syncing with a different computer/iTunes account. Is there any way anyone else has used your iPad and possibly connected it to their computer?

When I try to open my Address Book from Finder, it says :You can't use this version with this version of Mac OS x. I have Address Book 5.0.3 and Mac OS X 10.7.5 What should I do to get my Address Book back???

When I try to open my Address Book from Finder, it says :You can't use this version with this version of Mac OS x. I have Address Book 5.0.3 and Mac OS X 10.7.5 What should I do to get my Address Book back???

Unless you deleted Address Book 6, or restored from a backup made before you upgraded to Lion, Address Book 6 should be on your disk somewhere. Try to find it with spotlight or by browsing likely folders with Finder. Also check Trash. If you find other Address Books, using Quick View or Get Info in Finder should show the version number.
Have you ever moved Address Book out of the Applications folder, either before or after you upgraded to Lion?
If you can't figure out how this happened in the first place, I would be worried that other OS X utilities are similarly affected.

I have a macbook pro 13" with intel i5 2.3GHz processor. I want to know if my mac will be able to handle Battlefield 3 smoothly. I just want to play without any lag (I'll use Windows vista on parallels)

I have a macbook pro 13" with intel i5 2.3GHz processor. I want to know if my mac will be able to handle Battlefield 3 smoothly. I just want to play without any lag (I'll use Windows vista on parallels). I don't exactly know how turbo boost 2.0 works either. Or if it'll help.

Recommended system requirements for Battlefield 3
OS: Windows 7 64-bit
Processor: Quad-core Intel or AMD CPU
RAM: 4GB
Graphics card: DirectX 11 Nvidia or AMD ATI card, GeForce GTX 460, Radeon Radeon HD 6850
Graphics card memory: 1 GB
Hard drive: 15 GB for disc version or 10 GB for digital version
Minimum requirements for Battlefield 3
OS: Windows Vista or Windows 7
Processor: Core 2 Duo @ 2.0GHz
RAM: 2GB
Graphic card: DirectX 10 or 11 compatible Nvidia or AMD ATI card.
Graphics card memory: 512 MB
Hard drive: 15 GB for disc version or 10 GB for digital version
You only have 384 MB of GPU Memory....
Processor class
Intel Core i5
Processor model
Sandy Bridge
Processor speed
2300 MHz
Number of Cores
2
Cache size
3 MB
Graphics
Graphics Type
Integrated
Integrated Graphics Chipset
Intel
Integrated Graphics Chipset Model Number
3000
Graphics Memory
384 MB
Memory
Installed memory
4 GB
Maximum memory
8 GB
Memory technology
DDR3
Memory Speed
1333 MHz
I don't think your mac can handle it... but like the dude above you said... trial and error is usually the best way to find out. Hope this helps!

When I try to open files in with CS4 I get application was unable to open correctly. Reasons?

When I try to open files in with CS4 I get application was unable to open correctly. Reasons?

Well, it seems to be fine now. I down loaded updates to bridge and CS4 (and various other applications). This seems to have negated the issue.
Just to answer; yes it was happening with all file types. No I don't believe it ever worked before as I would always just open files in camera raw.

When i run labview6.1 on my pc with windows the "DAQ Solution " was gary doesn't work i don't know why ?i don't have a daq board card is that a reason? i want to know what should i have to use labview in data acquisitio​n?

Similar Messages

Maybe you are looking for

When i run labview6.1 on my pc with windows the "DAQ Solution " was gary doesn't work i don't know why ?i don't have a daq board card is that a reason? i want to know what should i have to use labview in data acquisition?