When I start de application, I get two messages at once. The first one tells me that there are two upgraded elements and the second one tells me that a customer of mine has made some online changes on the website. Then I can do nothing more.

Beste forum,
Ik heb een groot probleem met Muse.
Als ik het programma opstart en een bestaande website open, krijg ik twee meldingen te zien: de eerste zegt dat er twee geupsamplede bestanden zijn. De tweede dat er online een wijziging heeft plaatsgevonden. Beide vensters zijn vervolgens niet aan te klikken en het programma doet niets meer.@

The message tells that published version of the site includes some changes which you can synch to your Muse file, is that after sync Muse hangs ? is it with a specific file or any file ?
If you try to undo the changes , are you able to open the site and work ?
Thanks,
Sanjit

Similar Messages

When i start I tunes i get this message , The registry settings used by Itunes drivers for importing and burning CD'S and DVD's are missing

when i start I tunes i get this message , The registry settings used by Itunes drivers for importing and burning CD'S and DVD's are missing please reinstall..ive reinstalled 5 times ,all 5 clean installs ...still dont work with Iphone 3 ..

Same problem as me. No answers though. Also I can't access the itunes store. There is something missing in the registry but what? Seeing as your post was sometime ago it looks like there is no help.

Using the App Store, it shows that there are two upgrades. When itap upgrades, nothing comes up.

Using the App Store, it shows that there are two upgrades. When itap upgrades, nothing comes up.

I'm sorry that you ran into trouble with syncing fonts to your Creative Cloud application. Please try these troubleshooting steps:
http://help.typekit.com/customer/portal/articles/1649149
If that doesn't help, send the log files mentioned in that page to [email protected] and we will look into it further. Thank you,
-- liz

When I start my PC I get a message that ApplePhotoStreame.exe has stopped working. How do I fix this?

Upon starting my PC I get a message that ApplePhotoStream.exe has stopped working. Windows will close the program and advise if a solution is found. Nothing happens and I can no longeer send photos from my ipad2 to my computer using PhotoStream. Please, any assistance would be greatly appreciated!
Thank you

You are on pc or mac? I think pc. Below is a link that gives the steps, and it suggests you need to down load a controller, and then it tells you how to set it up. See if this helps any.
http://www.gottabemobile.com/2011/10/12/icloud-photo-stream-on-windows-pc/
Within the write up is a link to the apple site where the download is available, for free!

I bougt a new Macbook pro in 02/26/2013, in 11/25/ 2013, my trackpad become bulging, they exchange the trackpad, but not the bulging battery. I went there yesterday, with different problem, and they said one screw came off from the truckpad again!

I bought a new Macbook pro in 02/26/2013 from Apple Canadian Ices -003. Than I could not use it, because my cursor uncontrollably was jumping around the screen, I was resumed my trackpad become bulging, Than on11/25/ 2013 they changed my trackpad for free, because was manufactoring defect, but not the bulging battery. They said that is do not needed. Since that my cursor is quiet often quivering, I think my Macbook has serious manufacturing defect. But they said no, during a year period I went to the genius bar at least 15 times, with this and similar problems. I went there yesterday, with different problems, and they said one of the screws came off from my truck pad, therefore they need to fix it and change it. I said: - What, how, what is the real problem? A screw does not comes off just like that? They will change my trackpad again, but not the battery. They said has to rebuild the operation system, I'm saving all of my data right now! I would like to exchange the battery too, or maybe get a new Macbook. My Macbook is 2010 China model. How long I would have this trackpad problem? What are you suggesting?

If it's a 2010 as you say towards the end of your post, it's out of warranty. The battery isn't covered in that case. Why don't you just buy a new battery if that's your concern? If it's a 2013 as you say up at the top, it shouldn't have a bulging battery. How do you know it does? If it really does, ask for the store manager and explain the problem.

When I start my laptop I get a message saying,AppleSyncNotifier.exe Entry point not found error.It saysentry pointsqlite3_wal_checkpointcould not be located in the dynamic link library.

I go to my common files but cannot locate sqlite3dll. Can someone help me its become annoying not being able to resolve it.

Hi, I get the same error EVERY time iTunes updates.
I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
My Question:
Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
Thank You,
Steve

When I start MacBook OSX I get a message

I am stuck....Everytime I start my MacBook OS X 10.4.6 I get the message
Panic(cpu O caller 0X003AB787) unable to find driver for this platform "ACPI"
I have tried to to start with the install disc but get back to the same message.... Thanks for your help

Well I really am not sure what your problem is. Sorry. I do think when ever you get your problem fixed you should upgrade from 10.4.6 to 10.4.10. It seams that you don't do the software updates to often. Having your Mac up-to-date ensures the best performance of your model. Simply go up to the left corner of you computer and click the Apple logo. Then click on Software Update Install everything there is to. It might take a wile and slow down your computer so start updating right before you go to bed or work.

There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report

When run as a batch program, (currently this is the case), or withT-Code ZJPVCS303 the selection screen is unchanged (except for additional sales area above)
- When run as T-Code ZJPVCS303_UL (UL stands for Upload) the selection screen is changed. The unix file option is no longer available, and the user is able to upload a local file (in the same format as the current unix file, but tab delimited) to the program for processing.
Requirements:
There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report.
->When ZJPVCS303 Transaction is executed, the file is uploaded from the Application
server to SAP R/3. The selection screen parameters would be:
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
->When ZJPVCS303_US Transaction is executed, the file is uploaded from the Presentation Server
to SAP R/3. When this transaction is executed, it should not have the 'Logical
Filename' parameter anymore on the selection-screen. Instead it should only have
Local File name on the presentation server:
Sales Organization:
Distribution Channel:
Division:
    The same thing is applicable for the other transaction ZJPVCS303. When transaction ZJPVCS303
is executed, it should not have the 'Local Filename' parameter anymore on the selection-screen. Instead it should only have
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
So how should I make these parameters invisible depending on the transaction codes execution.
I have an idea of using MODIF ID, LOOPING AT SCREEN...MODIFY SCREEN.
I have an idea of using SY-TCODE.
EX:
AT SELECTION-SCREEN OUTPUT.
IF SY-TCODE = 'ZJPVCS303'.
LOOP AT SCREEN.
IF SCREEN-GROUPID = 'GRP'.
   SCREEN-INPUT   = 0.
   SCREEN-INVISIBLE = 1.
   MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF SY-TCODE = 'ZJPVCS303_US'.
LOOP AT SCREEN.
IF .....
ENDLOOP.
ENDIF.
ENDIF.
But I am not able to get the output which I require. Please help me out.

Hello Rani
Basically the transaction determines whether upload starts from application server (AS) or presentation server (PC). Thus, you will have the following parameter:
PARAMETERS:
p_as_fil          TYPE filename   MODIF ID unx, " e.g. Unix server
p_pc_fil          TYPE filename   MODIF ID wnd. " e.g. Windows PC
AT SELECTION-SCREEN OUTPUT.
CASE syst-tcode.
*   transaction(s) for upload from server (AS)
    WHEN 'ZJPVCS303.
      LOOP AT screen.
        IF ( screen-group1 = 'UNX' ).
          screen-input = 0.
          screen-invisible = 1.
          MODIFY screen.
        ENDIF.
      ENDLOOP.
*   transaction(s) for upload from local PC (PC)
    WHEN 'ZJPVCS303_US.
      LOOP AT screen.
        IF ( screen-group1 = 'WND' ).
          screen-input = 0.
          screen-invisible = 1.
          MODIFY screen.
        ENDIF.
      ENDLOOP.
   WHEN others.
   ENDCASE.
Regards
Uwe

I get an error message: R6034 -An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information. I just finished backing up my iphone on my hp laptop when I got this message.

When I finished backing up my iphone 5 to my hp pavilion laptop I got an error message R6034. Itunes shut down and I have not been able to reinstall it. The error message says an application has made an attempt to load the C runtime library incorrectly. My computer is more than 5 years old and I have never had this problem before. I tried unsuccessfully to reinstall itunes. Any ideas?
bdaumen

Hello iTunes_Bad_Update,
The following article provides information and troubleshooting steps that can help get iTunes back up and running.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

When trying to open itoons I get an error message: Program C\program files (x86) R6034 An application has made an attempt to load the C runtime library incorrectly.

when trying to open itoons I get an error message: Program C\program files (x86) R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more infomation.

Hello Michwilltwo,
It sounds like you are unble to open iTunes after a recent update. I would recommend the troubleshooting steps from the article named:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Be sure to follow the instructions as outlined by the links in the article as there is a specific order in which to uninstall iTunes and its associated programs.
Thank you for using Apple Support Communities.
Cheers,
Sterling

HT1926 When I try to open ITUNES I get the following messages: Runtime Error R6034 - "An application has made an attempt to load the C runtime library incorrectly" . I have 15,000 songs in my library. Will I lose them if I uninstall as suggested by Apple?

When I try to open ITUNES I get the following messages: Runtime Error R6034 - "An application has made an attempt to load the C runtime library incorrectly" . I have 15,000 songs in my library. Will I lose them if I uninstall as suggested by Apple??

Exactly the same problem. But it gets worse. iTunes has now disappeared from my list of installed programs so I can't uninstall anyway. Appalling problem. This update clearly didn't get proper testing before release.
In answer to your question about your song library, I seem to remember uninstalling and reinstalling iTunes a few years ago and the uninstall didn't remove the library then - I can't see why it would. Of course there have been a lot of updates since then, so it is definitely worth asking the question. Personally, I would be inclined to make a copy (if you have the space) of the iTunes folder just to be sure.
I certainly hope they get this fixed soon. I use iTunes mainly for podcasts on my iPod and I can't download anything right now.

When upgrading to the most current version of iTunes I get the following error message "An application has made an attempt to load the C runtime library incorrectly" How do I fix this?

When upgrading iTunes I recieve the following error message "An application has made an attempt to load the C runtime library incorrectly".
Program:C:\Program Files\iTunes.exe

See Troubleshooting issues with iTunes for Windows updates.
tt2

I get this error message when trying to start Itunes - "Runtime Error! Program: C:\Program Files\iTunes\iTunes.exe R6034 Anapplication has made an attempt to load the C runtime library incorrectly. I have tried to have iTunes re-install and correct.

I get this message when I try to start iTunes
Runtime Error!
Program: C:\Program Files\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime Library incorrectly.
I have tried to have iTunes re-install but still get the error.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh

After Upgrade to latest iTunes, it will not open.Uninstall and reinstall did not help Getting this error message '' Runtime Error R6034 '' An application has made an attempt to load the C runtime library incorrectly''. 3 windows PCs.1 vista, 2 windows7 7

I upgraded to the latest iTunes 11.1.4, after a prompt from the iTunes store. But will not open after the upgrade. One of three error messages told me to reinstall. I did. Restarted and scanned. But no help there. So I unistalled and re installed from Apples' website. The installation was okay as usual but still will not open. Keep getting the same error messages. '' Runtime Error R6034, '' '' An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.'' That's the error messages I get when I try to open the New installed iTunes 11.1.4. Right now there is no iTunes on any of my PCs. Installed but will not open. Please Help.Thanks.
Jonas.
3 Windows PCs. Safari 5.1.5 ( One Laptop with Vista. Two Windows 7 64 bit on All in One Sony desktop PCs. )

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

When I start de application, I get two messages at once. The first one tells me that there are two upgraded elements and the second one tells me that a customer of mine has made some online changes on the website. Then I can do nothing more.

Similar Messages

Maybe you are looking for