When I try to change my ringtone my current ring ton has default beside it. How do i get the default to go away?, When I try to change my ringtone my current ring ton has default beside it. How do i get the default to go away?
When I try to change my ringtone there if a Default by it. How can I remove it?
In settings/sounds you can select a ringtone for all callers. IF you want a particular tone for a specific caller you do that in the contacts app. GO there, select a contact and then tap edit. Then tap the ringtone field for that contact and choose something other than the ringtone you have chosen as the default for other cllaers in settings/sounds/ringtones
Similar Messages
-
My ipod has had a previous owner How do I change my ipods email address so that when I try to down load anything it asks for the previous owners password but when I go to my account it says its my email my account but not when I try to download can anyone please help me ????Plus it still has some of the previous owners pictures and videos on it that I want to delete and can't????? Also is there a way to kill the apps that u have used throughout the day the battery doesn't last long at all ??????
- How did you dlete stuff from the iPod? If you have a 1G or 2G iPod and deleted the stuff by going to Settings>Genera.>Reset>Erase aall contents and settings without being connected to a power source, the battery dies before he erase was comleted since it can take hour.
- In any event try the following:
- Connect to a chaging sour for three hours.
- Reset the iPod and then connect to the computer and try to restore va iTunes.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next try placing the iPod in recovery moe and then try to restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Last try DFU made and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
How do I change the Apple ID in the prompt on my iPhone when I want to update an app?
My Apple ID on my iMac's iTunes Store is my current one.
My Apple ID on my iPhone is my former one.
How do I change the one on my iPhone.
Thanks,
TomThank you.
I have not pinpointed the exact dates but I know I changed my Apple ID and downloaded the apps around the same time a few months ago.
My old ID is being used by a family member. I entered the password for that ID and the updates worked.
Next I will have to see what happens when I try to update the apps, she has some of the same, on her iPhone.
Again, thank you,
Tom -
I have a new macbook pro that I wish to sync all my apple devices--ipodclassic,nano,iphone4,touch-- that are currently synced with a 5 year old windows based computer with only 2GB of available hard drive space. How can I do this and maintain all of my info-contacts, songs,photos etc without losing this data< Thanks
you can either update to lion/ios5 and use the cloud to sync or you can plug in said devices and sync them with your MBP instead of your dell via a tethered usb connection.
also, sign into your itunes store account on your mac. -
when i connect my iphone to my laptop and open itunes it shows my iphone has nothing on it(no music, no movies, etc...) then when i try to sync it says iphone is is full and can only put in a selected amount of songs. Take in mind this is my first time to sync with this laptop(HP 15 ENVY) and as well my laptop is just brand new. just got it a week ago. so how do i fix this prob. and also when i open my itunes store and then view my account it says error occurred either debug it through Microsoft visual studio or close program. I tired copying all the .dll files to the itunes folder didn't help
I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535
-
After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thankszepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
The message ~There was a problem connecting to the server “your-447023ae6b”.appears when I try to play music transferred from my PC to my iMac. Files were transferred from my PC by a Genius. How do I sort it? Next appointment with genius is 5 days away!
Hi
Thanks this has helped me solve the problem.
I used the Outlook Anywhere connectivity tester you suggested. Selected Outlook autodiscover.
It told me that it could not resolve things on any of the 4 tests.
I saw that using the last test "Attempting to contact the Autodiscover service using the DNS SRV redirect method", was the only one likely to work in my case.
I had already changed 3 entries in dns to point at my DDNS address but this had not worked, from the errors I could see that it was just the certificate name not matching so I changed the DNS entries for Autodiscover, autoconfig and _autodiscover._tcp
to be webmail.domain.com which is a CNAME to my ddns address for the broadband router, which in turn forwards ports 80 and 443 to the exchange server for owa and activesync access. I got an error message saying that I had an illegal entry in my SRV record
as a CNAME is not allowed, but it saved the change anyway.
I reran the test and it worked.I can now make new outlook clients attach teo exchange.
Thank you, after 8 hours yesterday of trying to reolve this I suddnely got it to work on one laptop but the other still would not and had lost track of what I could have changed so had no idea what actually made it work.
Thank you for your suggestion. -
I purchased a ringtone from iTunes on 3/18/14. It never showed up on my iPhone, however it does show up on my pc and iPad. Ive tried numerous suggestions including a plugging my phone into the PC and syncing, relabeling the tones 1 of 1, trying to sync and transfer purchases multiple times...nothing is working. Does anyone have any suggestions?
Thank you.
GigiI am Gigi,
Welcome to the Support Communities!
Did you purchase the ringtone from your iPhone? The article below will explain what should have happened when you did. If you are still not able to access this purchase, I've included a link to the iTunes Store Support team for you.
The article below will explain where to find the ringtone you purchased on your iPhone and how to assign it to a Contact:
iTunes: Using the iTunes Store for iPhone, iPad, and iPod touch
http://support.apple.com/kb/ht1491
Tones
You can't purchase ringtones and alert tones from your computer, but you can purchase them using your iOS device with iOS 5 or later. You can purchase tones on iPad, iPhone (3GS or later), and iPod touch (4th generation or later).
To locate tones in iTunes on an iOS device:
Tap the iTunes Store app.
Tap Tones. If Tones isn't visible, tap More > Tones.
Browse for tones. Once you purchase a tone, a dialog appears.
Choose to set your new tone as your default ringtone or assign it to a contact. If you don't want to do anything with the tone, tap Done.
Tones you purchase using your iOS device sync to your iTunes library when you connect your device to your computer. You can find tones on your device in Settings > Sounds. In the Sounds and Vibration Patterns section, tap on Ringtone. Then scroll to the top of the list to see your custom ringtones.
If you don't assign a ringtone at the time you purchase it, you can always add it to a contact later:
Set a special ringtone for a contact - Phone - iPhone Basics - Apple Support
http://support.apple.com/kb/TI16
In Contacts, choose a contact, tap Edit, then tap Ringtone. Select the ringtone you'd like to hear when that person calls.
Download past purchases
http://support.apple.com/kb/HT2519
Audiobooks, ringtones, and tones
If you made a backup of these items on your Mac or PC, you can sync the itemsto your iOS device. You can't download these items again from iTunes in the Cloud.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
- Judy -
When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?
Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!! -
My Reminders app will not open. When I try to open it, it quits and gives me an error message: "Reminders quit unexpectedly while using the CalDAV plug-in." My Reminders is synced with my iPod touch, and it is fine on that. How do I fix it?
Also, the Calendar is loading very very slowly, and sometimes it quits and gives me the same error message as above.The problem has been fixed with the most recent OS X software update.
-
I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my photos are stored bridge never gets to where I can work. The message appears "building criteria" and I get an endless loop on the lower left panel. How do I correct?
You correct it by leaving Bridge alone until it finishes rebuilding its cache, overnight if necessary.
-
how can i change the email from previous owner of the computer to mine?
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1a. If you don't own another Mac
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
1b. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
2. Partition and install OS X
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
Launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?
How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.
-
I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
When I try to purchase a gift card I get the message unable to complete purchase now try again later. This has been going on for a week and half. I've called support they say everything is fine, but when I try again same message comes up. How can I get this fix?
Have you tried the on-line iTunes store support staff: http://www.apple.com/emea/support/itunes/contact.html to see if they can resolve this?
Maybe you are looking for
-
Does itunes backup Exchange e-mail
Hi All, I am investigating implementing iPhone 4G with Exchange 2007 for my client. I need to know for sure if iTunes backs up Exchange e-mails (synced via ActiveSync) or not. I will be enforcing certain policies on the iphone via ActiveSync but that
-
Using find my iPhone with two phones
My wife and i share the same apple id. I have a mobile me account and she doesn't, is there any way for her to activate find my iphone on her phone with my apple id and not pull up my mail on her phone as a result?
-
Hi All, We have downloaded IEXRCALL form from AU_TOP to the local machine.We opened that form with the form builder and we have done some code modifications in that form then compiled &saved it.After we closed the form builder.Again we open the same
-
Mass download of employees pictures
Dear All Is there any way to mass download employees pictures without using lsmw ? there is standard program for mass upload but i don't know if there other one for download.
-
Message Variant in R3 , hw is it created
Hi Experts, mine is an idoc to file scenerio, I see in the existing mapping , a perticular field in source idoc structure (MESCOND) is populated with a value , coming from R3. Based on this value some mapping is done. So w