When i try to reload the same data what will happen in my ods?

Hi all,
Someone has already loaded the data from flat file into the respective ods.
for instance:
customer number customer name cust address
   10001          xav          123
   10002          xac           234
And this has been loaded by some one else.
If i am going to load the same data in the ods. will it create 2 entries nor just going to be only one entry.
i meant will it be like this
customer number customer name cust address
   10001          xav           123
   10002          xac           234
   10001          xav           123
   10002          xac           234
nor like this
customer number customer name cust address
   10001          xav          123
   10002          xac           234.
Thanxs
Haritha

Hi,
If two Records of same key combination is there then over writing will happn in ODS. Within the request overwriting is done in the updation(from change log table to active data table). Within different request overwriting is done during activation(new data table to change log table) Zero record mode is doing this.
read this along with other replies
Thanks and regards
Obily

Similar Messages

  • 2 EJB same data what will happen.

    Lets use the good old bank example...
    There is an account with 100$... 2 clients connect and withdraw 70$ each what will happen?
    What should I set the transaction properties for the bean?
    Thanks

    "There is an account with 100$... 2 clients connect and withdraw 70$ each what will happen?"
    One client will grab the bean, perhaps perform some validation (amount can't be negative, etc), deducts the $70, then returns. When the transaction which encompassed the entity access terminates (or when the method returns if there is no transaction), the next client will be able to pull the entity bean.
    "What should I set the transaction properties for the bean?"
    Probably TX_REQUIRED, or TX_MANDATORY, depending on what you're doing. Really doesn't have anything to do with the first part of your post, though.

  • Hi.  I recently purchased 2 ringtones from itunes store.  When l asked the sysem provider to transfer my data from old phone to the new iphone 5, it gets override.  When i try to download the same ringtones, it asked for me to purchase again.  Pls help

    Hi. l recently purchased 2 ringtones from itunes store. When l asked the system provider to transfer my data from old phone to the new iphone 5, it gets override.  When i try to downloa the same ringtone again, l was asked to purchase it again. Please help tks

    You only get one download.
    Did you fail to save your ringtones to your computer?

  • Just upgraded to Mavericks and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported.  Is there a way to use my HP6100 Printer with Mavericks?

    Just upgraded my 2009 iMac (3.06 Ghz, core 2 duo $GB 1067 Mhz DDR3) to Mavericks OSX 10.9.5 and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported.  Printer says the software was improperly installed. Is there a way to use my HP6100 Printer with Mavericks or do I need to go back to Mountain Lion or Snow Leopard? 

    It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
    I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
    http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
    Alternatively ou could try Gutenprint (open source software):
    http://gimp-print.sourceforge.net/MacOSX.php
    I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you.

  • I want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

    i want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

    Oliver,
    Are you getting activation errors? As Ned stated , it is easier to troubleshoot if we have the specific type of error and error detail that you are getting.
    Here is some help on activation if this is the issue:
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Pattie

  • After trying to restore from time capsule, I get the following message when I try to access the folder "data." The folder "Data" can't be opened because you don't have permission to see its contents.  Any ideas?

    after trying to restore from time capsule, I get the following message when I try to access the folder "data": "The folder “Data” can’t be opened because you don’t have permission to see its contents."  Any ideas?

    Are you restoring from a TM backup??
    Check the methods Pondini outlines to do restore.
    Q14-17
    http://pondini.org/TM/FAQ.html

  • TS1702 When I try to reload The Sims FreePlay (sister deleted accidentally) from Apps Store I keep getting an error message "There is not enough avaiable storage to download "The Sims FreePlay". I check my settings and I do have enough available storage.

    When i try to reload The Sims FreePlay (sister accidentally deleted) from App Store I keep getting error message. There is not enough available storage on my device but there actually is enought storage. Not sure why I cannot get App to reload. I have synced to my computer. Help!

    To download/install an app directly to the iPod you need available storage equal to about three times the file download size. Syncing the app to the iPod requires a lot less. Thus you either have to free up more storage or sync the app from your computer.

  • My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?

    My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?

    I never used icloud before so there is no data to back up from. I just spoke  to the apple store and they said that if I do plug it in, all the data will be swiped....is there a program I can use to transfer my data from my phone to computer without loosing it all ???
    Renee

  • How the data is stored in Info cube...in the back end what will happen???

    Hi Experts,
    How the data is stored in Info cube and DSO...in the back end what will happen???
    I mean  Cube contain Fact table and Dimension tables How the data will store and what will happen in the backend???
    Regards,
    Swetha.

    Hi,
    Please check :
    How is data stored in DSO and Infocube
    InfoCubes are made up of a number of InfoObjects. All InfoObjects (characteristics and key figures) are available independent of the InfoCube. Characteristics refer to master data with their attributes and text descriptions.
    An InfoCube consists of several InfoObjects and is structured according to the star schema. This means there is a (large) fact table that contains the key figures for the InfoCube, as well as several (smaller) dimension tables which surround it. The characteristics of the InfoCube are stored in these dimensions.
    An InfoCube fact table only contains key figures, in contrast to a DataStore object, whose data part can also contain characteristics. The characteristics of an InfoCube are stored in its dimensions.
    The dimensions and the fact table are linked to one another using abstract identification numbers (dimension IDs) which are contained in the key part of the particular database table. As a result, the key figures of the InfoCube relate to the characteristics of the dimension. The characteristics determine the granularity (the degree of detail) at which the key figures are stored in the InfoCube.
    Characteristics that logically belong together (for example, district and area belong to the regional dimension) are grouped together in a dimension. By adhering to this design criterion, dimensions are to a large extent independent of each other, and dimension tables remain small with regards to data volume. This is beneficial in terms of performance. This InfoCube structure is optimized for data analysis.
    The fact table and dimension tables are both relational database tables.
    Characteristics refer to the master data with their attributes and text descriptions. All InfoObjects (characteristics with their master data as well as key figures) are available for all InfoCubes, unlike dimensions, which represent the specific organizational form of characteristics in one InfoCube.
    http://help.sap.com/saphelp_nw04s/helpdata/en/4c/89dc37c7f2d67ae10000009b38f889/frameset.htm
    Check the threads below:
    Re: about Star Schema
    Differences between Star Schema and extended Star Schem
    What is the difference between Fact tables F & E?
    Invalid characters erros
    -Vikram

  • Can someone please help me figure out why I keep getting the "can not reach server" when I try to download the ebook? This is happening with Adobe Digital Editions.

    When I try to download the ebook I bough, the Adobe Digital Reader shows the following message: "can not reach server".  Can someone please help me with this?
    TO be precise, it says "licensee server communication problem"
    Thank you

    The thread running through your explanation has to do with connectivity to your server. (iCloud out of the blue asking for password, unable to message your boyfriend, unable to access e-mail). You said that you boyfriend restart his device and then the two of you were able to then imessage. My best advice for you would be to go to settings to reset to reset network settings. Once this has been done you then will need to enter the name and password of your wifi. ONce this is done you then can attempt to check to see that all passwords are enter correctly.
    Good luck.

  • When i try to instal the up date it always tell me i have another copy opened of firefox even after resterting the computer

    lately when new update appeard on my computer for firefox
    when i try to activate firefox message appears try to download the new up date when finishing a new message appears telling me that there is another copy of firefox is still running and the update failed to instal the message tels me to close all fire fox coppies and try to reinstal the update again i restarted my computer but the same problim exists.

    All keys reset... quite a job... there is a lot of them!!!
    But nope, Firefox still forbids to install any add-ons at all.
    I am quite at a lost here. It just happened overnight probably following an update or something 'cause it was working fine and I had no trouble installing anything. Then one day, all my add-ons were gone and I cannot install back any of them.
    It's a shame because the strength of Firefox is actually the possibility to customize it with add-ons... If a solution is not found, I will have no choice but to pick another browser, I guess.

  • My shared iTunes library shows up fine on my Apple TV, but when I try to access the same library on my iPad to view the shared TV Shows everything jumbled and all over the place. There does not seem to be any order and many shows are missing.

    When trying to access the shared iTunes library of my Macbook Pro on my iPad(iOS 5.1) the TV Shows are all mixed up. Some shows are not even displayed. The same library display normally via my Apple TV. It appears that iPad using iOS 5 has lost the ability to recoginize that TV Shows have a main show title followed by a number of episodes eg., 'Top Gear', Season 17, Episode 1 to 6, and 'Modern Marvels', Vol lll, Episodes 1 to 16. This has to be a glitch with iOS 5 as it was working fine in previous OS versions.
    Does anyone know if Apple is aware of this anomally or is there a work-around? Thanks

    Perhaps you should ask over in the iPad community, you may get better answers there.
    It's actually my fault that psoon ended up here ... s/he intially posted over at Home Sharing, and I tried a relocate request to Apple TV rather than iPad.
    psoon, here's a link to the iPad community:
    Using iPad

  • I can load my Numbers "My Templates" onto my ipad Air running ios 8 using iCloud, but when I try to do the same thing with my iphone 5s also running ios8, I get an error message and they do not load. What to do?

    I am referring to the "My Templates" folder where I have designed my own specific templates. It loaded fine for iPad Air but confusingly, once it is on iCloud it does not seem to be accessible by my iPhone. So I tried the same process which entails finding the com.apple.numbers file and emailing the files; selecting them on iPhone then telling them to be opened by Numbers. Numbers will ask if you want them to be added to Templates. I said yes and after a brief attempt it returns the message that it cannot load the templates, an error occurred, but there is no reference as to what that error might be nor how to fix it.

    To anyone who has viewed this post and is having similar difficulties, the answer came on a different forum: I dragged & dropped the files from Mail to iCloud Drive. Opened them on my MB Air, they were saved in Templates and are now accessible across all my devices.
    Answer came from SGIll: Numbers templateshttps://discussions.apple.com/message/27505880#27505880Numbers templates

  • My iCloud password is correctly typed in iPad and in the MacBookPro; so why when I try to type the same password in my iPhone4s it won't verify it?

    I am trying to change the settings in my iPhone 4s, specifically the iCloud account.  I type the correct password and ID but it won't verify it.  I test the password on the computer and on the iPad mini and it verifies and lets me see my account.  Why can this be? 
    I have similar problems with the iTunes using the same ID -- the password would work in some devices but not in others, especially after every software update, and after a week or so it just starts accepting the password (as long as I resist the urge to reset the password).

    You have 2 versions of Pages on your Mac and are alternately opening one or the other.
    Pages 5.5.1 is in your Applications folder.
    Pages '08/'09 is in your Applications/iWork folder.
    Pages'08/'09 can not open Pages 5.5.1 files and Pages 5.5.1 alters Pages '09 files.
    Right click open to chose the correct version of Pages for your files.
    Pages 5.5.1 is a supposed "upgrade" but has over 100 features missing. I am surprised you didn't notice the huge difference in the User Interface as well.
    If you are unhappy about all this mess, say so by rating/reviewing Pages 5.5.1 in the App Store.
    Peter

  • After I updated to ios5 my calendar did not bring in dates and when I began re-entering dates after one or two it froze up and after I got it going again it will not populate an end time on the same date and will not save the appointment as a consequence.

    After I updated my Ipad2 to IOS5 my calendar lost all appointments.  After re-entering a couple of appointments it froze.  After getting it going again, the calendar will not populate an end date for the current day and consequently I can't save the appointment.  Is this a common problem as I have just purchased this ipad and the calendar function is very important to me.

    Hmm... It looks like they are gone forever now then. I can't think of any other way of getting them back apart from restoring from an iTunes or iCloud backup. Somebody else might be able to help but I think they're gone forever. I don't know why they were wiped from your iPod but it could be something to do with security. In the future I would recommend syncing to iTunes or iCloud to prevent it from happening again. You can always make a reservation at the Genius Bar and see what those guys can do because it seems that they are still there, they are just 'hidden' from view. http://concierge.apple.com/reservation/gb/en/techsupport/
    Cheers,
    Khal
    P.S I'm sorry for the late reply

Maybe you are looking for

  • How to add a value set in a custom form in query_find screen in R12 please

    Hello,I need to add a value set fileld found in the fnd_flex_value_set table in a query find screen . How do I proceed please ? Do I create a record group followed by a 'LOV' ? Thanks.

  • Flat file to idoc mapping issue

    Hi Gurus, i had a flat file format in sender side as below: H_ID     TYP_CODE    line_elemet      Quantity 5896  STANDARD                       1.transmitter    1 5896                  STANDARD       2.xxxxxxxxx           1 5896                   STA

  • Authorized Users for J2EE's Deploytool and HttpSession queries!!

    Hi guys,      i need some information about HttpSession, and J2EE's deploytool. First, i know how to use deploytool from the J2EE tutorial and it a good one but my assignment requireds more than that. I would like to know how to allow only authorized

  • Changing Keyboard on selection of Language Programatically

    Hello All,          Sub: Changing Keyboard on selection of Language Programatically. Note: Correction to earlier post Here we had a requirement on change keyboard on language selection, There is a list of languages in a dropdown based on the selectio

  • Seeking User Feedback on Future Direction for WebLogic Server Tools

    My apologies for cross-posting, but I wanted to make sure that as many of WebLogic Server Tools users as possible see this blog posting and get a chance to express their opinions. http://dev2dev.bea.com/blog/kosta/archive/2007/09/seeking_user_feedbac