When i use the macbook pro at home, do i need to use the charger or the battery, which is good to the battery?
when i use the macbook pro at home, do i need to use the charger or the battery, which is good to the battery?
I Personaly would use the Charger
see Threads
http://www.apple.com/batteries/
and
http://www.apple.com/batteries/notebooks.html
and
http://support.apple.com/kb/HT1446#Troubleshooting
Similar Messages
-
I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Mavericks for everything but the dictation software. I'm a newbie to apple
To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work. -
I know that the built in iSight camera records video. I want to set up a Canon 5D video camera and feed the Canon's video output into the MacBook Pro so that I can use the vectorscope in Final Cut Pro to adjust the exposure of the Canon 5D. Basically I don't want to buy a vectorscope to have on set to make sure the picture is properly exposed and color balance is correct. (In your response it doesn't have to be the full scenario I've described. If you can just tell me if there's a way to feed live video into the MacBook and display it on the screen and possibly record it, then I'll figure out the rest.)
Dear Ben,
Thanks for your help. Apple and I dealt with this. It was an FCP, NOT Motion problem. As It seems you understand, we simply trashed my FCP prefs. Problem went right away.
Thanks. Do you live near Hammond? Played in a rugby tournment down there once. I was transformed.
MS -
i have formatte the macbook pro 13 as it was slow and with boot camp,at the time of format sesstion stopped at 61% and was asking 6 hours to
complete.this was for 24 hrs on condtion so i skipped and now i find only 150 gb reserved for boot camp,where 350 allocated for mac is missing
pl advise the solution
i wish to install maverick so i started this on my 10.6.8 verstion macbook
thaks and regards
Dr srinivasUse the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
Can I use my macbook pro mid 2012 as an external display using thunderbolt port
Hi,
I want to use my macbook pro (mid 2012) screen as an external display for a raspberry pi using a HDMI to Thunderbolt cable, via the thunderbolt port on the macbook pro. Would this be possible? Can the macbook pro's thunder bolt port act as an input and is any additional software required?
I look forward to hearing from you.
Thanks in advance!Welcome to Apple Support Communities
You are referring to Target Display mode. Target Display mode can only be used in 27-inch iMacs and iMacs with Thunderbolt, not MacBooks Pro > http://support.apple.com/kb/PH11302
Unfortunately, you can't use the MacBook Pro as a display. It doesn't support the monitor mode -
I have inherited an ICloud account from one of my employers when transferring from old MacBook Pro (which belonged to them) to new MacMini and need to separate from this, presumably by setting up a new ICloud account. How do I do this ? And is there any danger, in doing so, that I might delete any of her ICloud information ?
Sign out in System Preferences>iCloud. This will remove any synced data such as Calendars, emails and Contacts from your Mac, but will have no effect on the data on the server - so that other devices logged into it will continue to see the data.
-
I am planning to change my Macbook pro and due to office network structure i need a macbook with ethernet port. It seems that the only option i have is the 13 inch macbook pro non retina.. I just wanted to confirm that will the basic non retina model of macbook pro will also come with HASWELL processors or not..? (After the 22 oct 2013 apple event)
13-in remains unchanged since early 2013 update. Source: http://www.engadget.com/2013/10/22/apple-unveils-haswell-based-macbook-pros-with -retina-display/
-
This is the error message:
Interval Since Last Panic Report: 40328 sec
Panics Since Last Report: 1
Anonymous UUID: 5E889A13-BFD5-45E1-B98C-5F3F1FB23C33
Tue Feb 4 20:52:34 2014
panic(cpu 3 caller 0xa01c9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0x7fa45000 0x0a5480a2, D0, P3/4
Backtrace (CPU 3), Frame : Return Address (4 potential args on stack)
0x5c85a458 : 0x21b837 (0x5dd7fc 0x5c85a48c 0x223ce1 0x0)
0x5c85a4a8 : 0xa01c9b (0xc1728c 0xc87800 0xc25e60 0x0)
0x5c85a548 : 0xb1c608 (0x8c16c04 0x9499004 0x100 0xccff02)
0x5c85a598 : 0xb13601 (0x9499004 0x100 0x5c85a5c8 0x9f1778)
0x5c85a5c8 : 0x16f59a6 (0x9499004 0x100 0x438004ee 0x0)
0x5c85a708 : 0xb3b2b5 (0x9499004 0x912f004 0x0 0x0)
0x5c85a748 : 0xa0ae7c (0x9499004 0x912f004 0x0 0x0)
0x5c85a7e8 : 0xa0755b (0x0 0x9 0x0 0x0)
0x5c85a998 : 0xa08af9 (0x0 0x600d600d 0x704a 0x5c85a9c8)
0x5c85aa68 : 0xcbd8ff (0x5c85aa88 0x0 0x98 0xee79b00)
0x5c85ab28 : 0xcc31bb (0x9648c04 0x0 0x5c85ab58 0x504ded)
0x5c85ab68 : 0xcdf4e0 (0x9648c04 0xf6078e8 0xef72dc0 0x506ad1)
0x5c85ab88 : 0xcd1b7f (0xef72640 0xef61800 0xf3f6a04 0xcad5f6)
0x5c85abb8 : 0x56deb8 (0x463cc000 0x15 0x5c85abe0 0x5c85abe4)
0x5c85ac38 : 0x56e272 (0xd29900 0x463cc000 0x9f7dc88 0x1)
0x5c85ac88 : 0x56eb59 (0x463cc000 0x1e 0x5c85acd0 0x0)
0x5c85ada8 : 0x286638 (0x463cc000 0x1e 0x9f7dc88 0x1)
0x5c85be58 : 0x21dbe5 (0x9f7dc60 0xf83f5a0 0x1fb588 0xb603)
0x5c85be98 : 0x210a86 (0x9f7dc00 0x0 0x9cc3f50 0xe44e8c0)
0x5c85bef8 : 0x216f84 (0x9f7dc00 0x0 0x0 0x0)
0x5c85bf78 : 0x295c57 (0xdf90208 0x0 0x0 0x0)
0x5c85bfc8 : 0x2a256d (0xdf90204 0x0 0x10 0x8ea8284)
Kernel Extensions in backtrace (with dependencies):
com.apple.GeForce(6.4.0)@0xc89000->0xd3ffff
dependency: com.apple.NVDAResman(6.4.0)@0x99b000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x98e000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x955000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x96c000
com.apple.nvidia.nv50hal(6.4.0)@0x15bf000->0x19d3fff
dependency: com.apple.NVDAResman(6.4.0)@0x99b000
com.apple.NVDAResman(6.4.0)@0x99b000->0xc88fff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x955000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x98e000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x96c000
BSD process name corresponding to current thread: plugin-container
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 1520850684298
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.2.0 (addr 0x145a000, size 0x65536) - last unloaded 159943879609
loaded kexts:
at.obdev.nke.LittleSnitch 2.3.09
com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 17673840711
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AudioAUUC 1.57
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleIntelHDGraphics 6.4.0
com.apple.driver.AppleIntelHDGraphicsFB 6.4.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.GeForce 6.4.0
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.driver.AppleLPC 1.5.1
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.driver.AppleSMC 3.1.0d5
com.apple.nvidia.nv50hal 6.4.0
com.apple.NVDAResman 6.4.0
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.8 GHz, 4 GB, SMC 1.58f17
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000BPKX-00HPJT0, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 6
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3Your MBP is actually a mid-2010, not a 2008. That's what the 6,2 model indicates.There's an issue with the graphics module on that machine. There was a program in place to replace the motherboard within 3 years of purchase, but you're probably outside of that. Some folks have supposedly gotten theirs changed outside of that period, so you can try.
http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US
What you can do to use it is download gfxstatus from http:gfx.io and force the graphics to Intel. That would affect your work with Final Cut, but at least you might be able to use the machine. -
Using the MacBook Pro with external Monitor and Keyboard
This may be a dumb question, but here it goes anyway:
Can I use the MacBook Pro with an external monitor and a bluetooth keyboard and mouse without having it opened all of the time ?
I am planning to buy a MacBook for my wife and most of the time she will be using it at her home office.
I don't want her to use the computer opened all of the time when she is actually looking at the separate screen and using a separate keyboard. Having the laptop opened will only accumulate dust and reduce the lifetime of the built in screen.
What I would actually need is a kind of "docking station", but Apple doesn't make that - I know.
So can the MacBook at least be operated without the internal screen powered on while it is closed?
Thanks for your help
Martin
Message was edited by: mdoppYes - it's called clamshell mode:
http://support.apple.com/kb/HT3131 -
How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now. Mail will no longer download on the MacBook Pro and keeps asking for my password.
Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem. -
Mobile Video Editing on the Macbook Pro 13'' - Some questions...
This is my first time visiting this forum, and I just wanted to get some thoughts on a mobile video editing setup I am looking to create... Here's what I'd like to do:
- Use a Macbook Pro 13'' as my primary editing machine using Final Cut Studio for relatively small, but important projects.
- I want to be able to edit as speedily as possible, but on a moderate budget. I know that keeping FCS on the MBP's main HD and editing video on an external drive is the best way to go. Also, because the fastest interface option on a MBP is Firewire 800, I am thinking of using a G-Raid Mini 500GB drive in Raid 0 for both maximum speed and portability. But I also want to be able to easily backup any video edited on the external drive. I am weary of the fact that MBP only has 1 Firewire port (and in this scenario, I need to connect a G-Raid drive, a DV camera, and yet another external drive for backing up the G-Raid Mini)
Oh what a pain.
First, something I can't seem to find out is... if I want to load video to the G-Raid drive, I'm going to have to daisy chain my DV camera to it. If the DV camera is Firewire 400, will this lower the Firewire 800's port on the MBP down to 400 as well, thus kind of crippling the idea of speedy Raid 0?
And second, assuming I can hook up both the G-Raid and the DV camera to the Firewire 800 port without degrading speed... what would the best way be to go for backing up the G-Raid? I am thinking of using a USB 2.0 500GB drive, and using some sort of backup automation software. Any suggestions there?
What I'm looking for is mobility, functionality, secure backup for everything I shoot. I should have gone for a MBP 17'' with a Express slot, which would solve these potential issues... but again, I'm on a budget - and can't break the bank on this right now.
Any responses or suggestions are greatly appreciated!
ZacThanks for the response.
But a couple things... the reason I'm going with the 13'' is purely out of circumstance. I have a friend who just didn't want it anymore, and is selling it to me insanely cheap. Also, I already have extra monitors
I think what I am going to do is this:
G-RAID 500GB running in Raid-0 connected to the FW800 port. From there, when I need to capture, I will daisy chain the DVX-100 to the G-RAID... which will cut the FW down 400 from what I have read. After my video is captured, I will disconnect the DVX100, so I can get the FW800 G-RAID back up to proper speed during actual editing. When I want to do backups, I will connect a regular 500GB G-DRIVE and run a clone of the G-RAID everynight after I finish editing.
This solves a few problems, but it doesn't solve the issue of an external TV for native viewing while editing. Personally, I don't think I will always need this, but my DVX100 does do passthrough. (anytime I do it though, it will bump my FW speed back down to 400) So I can either do that, or I can look into S-Video USB options (which I haven't researched yet)
It won't be the most ideal setup in the world, but it seems like a lot of people with these newer Macbook Pro's are suffering the same kinds of issues. Hopefully I will manage.
If anyone has any further suggestions, please let me know. Anyone else with a Macbook Pro 13''? What kind of mobile setups have you come up with?
Zac -
When I updated my macbook Pro to Maverick, I lost I Photo. How do I get it back to manage my pics?
When I updated my Macbook Pro to Maverick, I lost I Photo. It seems as if my pics are still on the laptop, but I have a really hard time finding them. I no longer have I Photo. Can anyone help me in getting that application back and putting my pics back in it? I loved the faces feature. Thank you!
Run the >software update>iPhoto
If you have a legit copy of of iPhoto you are eligable for the Mavericks compatible version. Look for it in your applications folder along side the older versions.
If not purchase it on the AppStore to regain access to your iphoto library as you knew it. -
What is so "Pro" about the MacBook Pro?
"Pro" is short for professional and the Apple brand has been synonymous with creative professionals for at least 20 years... I know, asI am one of them.
Now, the MAC PRO (tower) is no doubt, a professional grade machine. With 4 hard drives, 2 DVD drives, 4 expansion bays, 5 USB ports and 4 Firewire ports, and a whopping 128GB RAM, I'd say it lives up to the name "Pro". This machine IS the industry standard in film editing, recording studios, graphic design, ect... The one catch, is that it's not portable...
In come the MAC BOOK PRO. It's lightweight and has excellent battery life which is ideal for portability.
Now here's what I'm getting at: When you're on the road, at a meeting, or working in the field, you're probably not going to need all of the hardware of the Mac Pro, but only 2 USB ports? That sounds like a joke to me!
Say you meet someone at a cafe and you decide to transferring some files from your USB drive to his... That's it, you're done for USB ports. You can't even can't grab a charge for your phone, your ipad, plug in a digital camera or whatever because it only has 2 USB ports. And it really annoys me when I see these PC guys with laptops half the price of a MacBook and they're sitting there with all kinds of stuff plugged in. Notebooks like the Inspiron's and ASUS have 5 USB ports... FIVE!!!
So I ask you, "what's so pro about the MacBook Pro?" Having to constantly plug and unplug peripherals is quite amateur to me.Melophage wrote:
rick268,
the “Pro” in MacBook Pro was in comparison to the “Pro-less” MacBook. If the two USB ports on a MacBook Pro don’t suffice for your needs, then you can either bring along a powered USB hub, or you can simply not get a MacBook Pro — get one of its competitors instead, which has the number of USB ports which you need.
I know I can get a USB hub, or better yet, I've been looking into a thunderbolt hub- I just wish I didn't have to sacrifice ports in Apple's conquest to make the thinnest laptop in existance. -
Hey
Is the version of Front Row shipped in Macbook Pro the same as the one in the new Intel MacMini? The Front row description in the apple site http://www.apple.com/macmini/frontrow.html talks about "Let Mac mini and Front Row entertain you by playing songs, slideshows, and videos from other computers in the house"
The reason i am asking is becoz i want to know if one can use the FrontRow In the MacBook Pro to see my Photos, Music, videos that is stored in my PPC MacMini instead of porting the whole collection from the Macmini to the Macbook Pro?
Ranjit
Mac Mini Mac OS X (10.3.8)
Mac Mini Mac OS X (10.3.8)I don't have my MBP yet but from what I gathered the versions are the same and include Bonjour that allows you to share media and files from one OS X machine to another without actually have to copy the files from one computer to another. It should 'just work' as Apple says.
-
When you buy a macbook pro, do you get iDvd installed?
when you buy a macbook pro, do you get iDvd installed? or do you have to buy it?
shldr2thewheel wrote:
The newer boxed set of iLife '11 does not include iDVD.
AFAIK, there is no suich thing. There is no listing for iLife in Apple's online store. iPhoto, GarageBand & iMovie can only be obtained through the Mac app store.
Maybe you are looking for
-
Save link as not the same as Save target as in IE. How do I get svat target as in firfox?
I am new to Firefox. Downloaded FF4. It is excellent except for I thing, I download files from rapidshare, etc, and Firefox is missing the "save target as" of IE. I tried "save link as", but it does not work correctly - at least not the same as IE. I
-
When I try to install I receive this message: "Firefox has stopped working A problem caused the program to stop working correctly. Windows will clsoe the program and notify you if a solution is available." This happens when I select RUN to install Fi
-
Sending mail to internal mailadres to external smtp
Hi, I must have 1 email address from my email-domain (intern and external) that always send the mails to the external smtp-server. example: mail domain is novellrocks.com email address create is [email protected] So when we send internal our external
-
Not receiving forwarded emails on Exchange and some attchments
Hi All, This is not only happening to me, but everyone in my entire organization every sine iOS 8.0 came out, and the issue continued with 8.0.1, 8.0.2, and 8.1. The issue is pretty persistent as well. When someone forwards an email to us, we are not
-
OSB Delete Entire Node (SOAP:header) in Proxy service
Hi I am wanting to delete the SOAP:header node in the response in the SOAP proxy service. I am using the Delete action with the following settings Xpath: . In Variable: header All this is doing is deleting the contents of the "Header" node when I wan