When i went install the recent update, my IPAD froze in the picture of the plug in and i tunes on it
When i tried to download the latest update on my IPAD, it froze showing a picture of the power plug and the i tunes emblem
Your iPad went into recovery mode and must be restored now. Read this for more information and the instructions as to how to restore.
If you can't update or restore your iOS device - Apple Support
Similar Messages
-
Please help
Mac OS 10.6 Snow Leopard came out in July of 2009 and became obsolete in July of 2011 when 10.7 Lion was introduced. Unlike earlier Operating Systems which were removed from the Apple Store when a new OS came out Apple kept Snow Leopard around for a year until 10.8 Mountain Lion came out. When Mountain Lion came out they removed Snow Leopard and Lion from the online store.
The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.
The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0 -
my friend gave me ipod touch with all his accounts, i created new accounts but when i went on the appstore and tried to update apps installed by him,i was asked his account's password! i dont know his password.how can i use my account to update apps?
You can't. Apps and really all content purchased/downloaded through one Apple ID is forever tied to that Apple ID. In the case of Apps they will always request that Apple ID to update as they are licensed to that Apple ID.
In reality, the Apps were licensed to that Apple ID by the developer. And cannot simply be given away to you for you to use.
He should have wiped the iPod clean so you could set it up for your use without any of his accounts or purchased content as you are not really licensed to any of those Apps.
Your friend should have followed this support document before giving the iPod to you:
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support -
Tried to open a file I created in Numbers a while ago, which I modified on 11/4/13, and got a message that I needed a newer version of Numbers. When I went to the Mac App Store it shows that the new version is already installed and there doesn't seem to be a way to reinstall it. When I checked "About Numbers" on my MacBook it shows "Numbers '09 version 2.3". Any suggestions as to how I can get the new version installed?
Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.
-
I have the original iPad- about 18 mod old. I tried to download an etool program and it required iflashplayer. My iPad wouldn't do it. I went to the apple store and they told me to update my software to iOS 5.1.1 which I did . Now none of the apps I had installed prior to this work. The icons are still on my screen but when you touch them, it just blinks and nothing happens..like the screen is frozen. How do I restore all of these apps and favorites that I had on prior to this update? Please speak in very non- tech terms if possible. I am VERY low tech unfortunately!
Welcome to Apple Communities
You must use iTunes. Connect your device to your computer, open iTunes, select your device in the sidebar and press Restore. Then, you can restore your device from a backup, and sync the device with iTunes to transfer your files to it pressing Sync button -
so i bought the 9.99 a month photoshop (with lightroom) and then installed CC when i went to the app tab both PS and LR said "try" instead of install is that how setup usually goes? or well it ask me later for serial numbers?
Oscarf16161909 for information on how to resolve the connection error preventing the active membership from authorizing please see Sign in, activation, or connection errors | CS5.5 and later. If you have any questions regarding the steps listed in the document you are welcome to update this discussion.
-
I recently updated my ipad to ios7 last night and today it asked for my passcode but when i went to input it it would not take and is now disabled. How do i unlock it?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
I recently updated my iPad and when I went back to read a book that I had purchased I'm getting error messages and whole chapters are missing. I tried re-syncing with my mac book and nothing changed. Any help to restore my book completely?
Try a system reset. It's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, you'll need to do a time-consuming "Restore." -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
I recently updated my iPad to iOS 8 and still checking on the settings. When I happened to swipe on my screen for too long, it zoomed and I can no longer see what's on it. I can not even unlock it. I can not use my iPad anymore. What shall I do?
Try double tapping with three fingers and see if that reduces the screen image. If it does, unlock the iPad and go to Settings>General>Accessibility>zoom>Off. If double tapping with three fingers doesn't work, try triple tapping the home button instead.
-
I am getting an error when trying to install the current updates.
Why don't you try telling us what the error is...
Check this document for troubleshooting information: http://support.apple.com/kb/ts3694 -
When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I just installed the latest version of iTunes, but when I went to open iTunes I got a message saying registry settings used to for importing and burning CDs and DVDs are missing and I should reinstall iTunes. Really?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I have just updated my i phone 4s with the new ios 6 software and most of my apps have disapeared when i got to the app store and search for an app i cant find i click on it and it says the app is installed. but i cant find it in my apps if i double click on it it opens. Any ideas?
Thanks PeteI have the same problem. Some of my purchased songs are missing also.
-
I accidentally deleted Candy Crush off my phone, and when I went to reinstall it, it reinstalled but has now disappeared from my screen. I went to the app store and it says there that it is still installed. How do I get it back?
You may have accidentally put it in a folder instead of deleting it. Check all your folders to see if it is in one.
Maybe you are looking for
-
Hi! i am using alv grid and i got the output. In the list i want to display the total number of records in the alv grid list. thanks.....
-
HI can anyone please share the user table documentation. Thanks
-
Field lables changes in ESS iView not reflected on portal
Hi All, I am trying to customize the SAP ESS Address DC (webdynpro Java) for South Africa region as per the SAP OSS note (No: 1428933). In order to incorporate the changes I have imported the ess/za/addr DC into NWDS. I have changed the label text as
-
BAPI_REQUISITION_CREATE Problem with COMMIT WORK AND WAIT
I ran into an issue and wanted to get your opinions about what might be happening. This is my original code that did not work correctly using COMMIT WORK AND WAIT. After the select statement, lv_count was zero even though there were PR items that had
-
Tracking the execution of Function Modules
Hi there, for ABAP reports there is an enhancement S38MREP1 'Exit at Start report' in transaction CMOD available which could be used e. g. to track the execution at least of executable programs (TRDIR-SUBC = 1); limitation: it is executed before the