When is loaded the SID Table?

Hi,
I thought that the SID table is filled when a Cube is loaded or when the Masted Data Attribute is loaded.
But we are facing a problem with the InfoObject 0ACTIONREAS (it has the 0ACTIONTYPE as compounding).
When we load the cube it says "No SID found for value 'Z317 ' of characteristic 0ACTIONREAS".
This InfoObject has a datasource to load the Text but not the Attribute (althoug it has checked the Master data attribute).
What could it be happening?
Regards, Federico

This is a data quality issue, it appears. You state that the message being thrown is:
"No SID found for value 'Z317 ' of characteristic 0ACTIONREAS".
If you notice, the value has a space at the end, which SAP BW chokes on, and therefore cannot generate a SID for that value if one doesn't exist. You're going to need to modify the transformational logic for the target of this Characteristic by changing it to a Formula and using the R_TRIM function, to trim the space off of the value. SAP BW doesn't allow values to have a space at the beginning or ending of a Characteristic and will throw this error when it's encountered.

Similar Messages

"Could not load the system tables" when installing the MAXDB DB instance

Hello,
We have an error when we are installing the MAXDB 7.5 for Netweaver 04's Unicode Kernel.
The central instance is installed, but when we launch the DB Server, in the step 14/25 Activating the DB, the follow error ocurrs.
"ERROR 2007-03-12 11:44:21
MDB-07048 Could not load the system tables. Check the files 'dbm.prt' and 'dbm.ins' in the run directory of the database (search fo
r "load_systab") or call the Support Center."
the file dbm.ins is not found, but the file dbm.prt have:
2007-03-12 11:44:14 0x00000a94              0 DBM      command load_systab
2007-03-12 11:44:14 0x00000a94 ERR     -24964 DBM      ERR_EXECUTE: error in program execution
                    0x00000a94 ERR     -24964 DBM      256,/sapdb/XIP/db/bin/x_python /sapdb/XIP/db/env/lsystab.py -R /sapdb/XIP/db
-d XIP -u SUPERDBA,*.
I search information in OSS, but we can't found solutions.
Best Regards, Alberto.

Hello Alberto,
if you're an SAP customer, can you open a message about this error, and enter a service connection into the MAXDB server?
Thanks,
Ashwath

Adjusting the SID table for master data infoobject

Hai
Im trying to activate one master data infoobject. But it says the error like below
The SID Table /BI0/SBBP_DELREF must be converted incompatibly with an activation of characteristic 0BBP_DELREF (changes to the key in the table). Table /BI0/SBBP_DELREF contains data. Parts of this data were lost in the conversion.
or
Undo the changes that led to the incompatible conversion (the changes in the key) or delete all data from table /BI0/SBBP_DELREF.
So how can i adjust the SID table for this .
pls tell me
kumar

Hi,
you'll have to delete ALL the master data for this IObj. Therfore you'll have to
delete all data in ALL the IObjs using 0BBP_DELREF (ODS, CUbes and characteristics).
Then activate your IObj. You will go through some step which I explained in the
following thread
Re: Urgent...Company Code lenght has been changed
Extract:
1. Delete 0COMP_CODE master data.
- get objects list using 0COMP_CODE with loaded data: I suggest to delete
master data via AWB (right click the characteristic). If it can't be deleted because
it is used display the deletion log (via AWB or tx SLG1 / RSDMD, MD_DEL).
- delete loaded data for the list above.
This should not be too much since you are in DEV.
2. change 0COMP_CODE length
- change the length to 4;
*- Activate your IObj. You'll get a popup log, validate. Activate despite warning and
errors. You will get An error message, validate.
You should get an horizontal pane with the activation log. Read it for your personal culture but if you don't have time then don't...
- Next the system will prompt to convert the tables: answer YES. The system will ask to schedule the table conv. in the background, go4it.
- next is the SE14 screen for the P table: Hit Activate and adjust (Direct
execution, or in the back as you wish). Answer yes to the mass processing
question and yes (again) for request adjust online. Your table should be converted successfully.
- go back twice from this screen (leaving SE14 tx and return to RSD1). reread the update log if you wish.
- repeat from the *- above... it will perform the very same for all other P tables of IObj using 0COMP_CODE and the 0COMP_CODE S table.
Your IObj is reactivated again. So should your ODS/DSO objects (check activate for example). Cube didn't need to convert tables since the MDID is note posted in any table of a cube.
Please note that once your IObj is in revised version you can perform the same via the menu extras / database table / convert all (see my previous post).
Now you have to evaluate the task. Of course that is a work to fix the mistake.
Depending on when it has be changed it may be worth to restore your DEV sys with a backup (loose work performed from the backup until now).
hope this helps... otherwise, revert.
Olivier.

DIM IDu0092s are polluted only when we load the Master data and SIDu0092s

DIM IDs are polluted only when we load the Master data and SIDs are polluted only when load the retraction data. System automatically performs the reconciliation of DIM and SIDs when we delete the transaction and master data.
a. True
b. False

Hi,
You can use the mapping section of the transformation file for this purpose. It should be something like:
*COL(5) + *Str(_) + *COL(1)
I am considering that the 5th column of your file is the property. The 1st column is the ID.
Please take a look at the below link for more information:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/5d/9a3fba600e4de29e2d165644d67bd1/content.htm
Hope this helps.

How Bex flageffects internally effects the SID table entries for Master Dat

Hi Every one,
I do understand how the Bex flag setting works in relation to reporting like y we set the flag or y we dont set the flag when we do reporting or not on ODS.. My question here is, i dont understand, how the SID tables or the master data tables or ODS tables get effected with this flag. Can some one explain me what kind of changes in the tables takes place with this flag setting and how it is used in the reporting.. How this thing is different with respect to Cube reporting process.. I do understand that ODS doesnt have Dimensions.. so i am just looking for conceptual clarification and not any forum links related to the Bex falg.. i have already gone through many links in the forum, but they didnt help me to clarify this process at table level which i am looking for... ANy help will be highly appreciated in SDN way..
regards,
kishore

Thanks Durgesh but I have tried every master data test in RSRV. I think because these document number characteristics don't have master data tables most of the tests return a message that the test does not apply to the characteristic. These characteristics only have a sid table.

Error when i fetch the external table in oracle 9i ?

External table is created.
But, when i select the external table , it is thrwing the following error.
I have given READ and WRITE permission to the oracle directory.
And, i having the flat file with comma delimited data.
SQL> create table mohan_ext (
2 EMPNO NUMBER(5) ,
3 JOB VARCHAR2(15),
4 SALARY NUMBER(8,2),
5 MGR NUMBER(5) ,
6 HIREDATE DATE,
7 DEPTNO NUMBER(5)
8 )
9 organization external
10 (type oracle_loader
11 default directory ext_dir
12 access parameters (records delimited by newline
13 fields terminated by ','
14 missing field values are null
15 (
16 EMPNO NUMBER(5:5) ,
17 JOB VARCHAR2(15:15),
18 SALARY NUMBER(8,2:8,2),
19 MGR NUMBER(5:5) ,
20 HIREDATE DATE,
21 DEPTNO NUMBER(5:5)
22 )
23 )
24 LOCATION('flat.txt'));
Table created.
SQL> select * from mohan_ext;
select * from mohan_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "identifier": expecting one of: "comma, char, date, defaultif,
decimal, double, float, integer, (, nullif, oracle_date, oracle_number, position, raw, recnum, ),
unsigned, varrawc, varchar, varraw, varcharc, zoned"
KUP-01008: the bad identifier was: NUMBER
KUP-01007: at line 5 column 11
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
SQL>

You may need to scrub some of the data prior to using it as an external table. For instance, ensure that you do not have any extra commas lingering around somewhere within the data as this could cause mapping issues with the data. I've used this process hundreds of times, and more often than not there is an extra comma somewhere that is causing the issue.

I just bought a Macbook Air and a usb super dive. How do I install MS Office 2003 on it? It won't launch the install when I load the disk in the superdrive.

I just bought a Macbook Air and a usb super dive. How do I install MS Office 2003 on it? It won't launch the install when I load the disk in the superdrive.

A 2003 MS office sounds like a Windows version. A 2004 MS Office that was Mac compatible can not be run natively on a new MBA since the Lions do not run PPC applications. You will have to get a newer edition of MS Office that is compatible with your new MBA.
Ciao.

I have a new Linksys router. When I load the accompanying CD it informs me that it supports OS 10.5.8 or later, OS 10.6.1 or later, and OS 10.7 or later. I am running 10.9.2, which apparently isn't supported by this Router. Any suggestions?

I have a new Linksys router. When I load the accompanying CD it informs me that it supports OS 10.5.8 or later, OS 10.6.1 or later, and OS 10.7 or later. I am running 10.9.2, which apparently isn't supported by this Router. Any suggestions?

No they should be agnostic about what is behind them, but as to support for IP6, or whether any computers or tablets can use AC... and hasn't Apple's own units sometimes stop being supported with new Mac and new versions of OS X? seems so.
I said above, why would anyone install any kind of software to use a router? although Netgear's GEnie is or was installed on my systems that adds a nice way to log in and manage the router, so I have to take that back a notch.
Support for modems and ISPs is a concern, my modem is not certified fully with DOCSIS 3.0 or FIOS.
Look around and you can find routers having trouble with some network services like Airplay, printing and scanning, the software bundled with router.
However, ethernet chips, and the driver, can be a factor. Problems with Intel networking chip and high bandwidth streaming and not being able to handle the load when used by wifi euipment like notebooks and other devices.
I have only seen the LARGE number of complaints on MacBook forums about wifi issues to suspect something is wrong but not sure what. And those are people that depend on wifi I assume, though some could use their Thunderbolt equipped Mac to use ethernet to get around the problems. And I am seeing the same thing with some Windows users and maybe they all have common Intel chips???
MacBook Pro constantly losing wireless connectivity
I use Windows 8.1 primarily. I also don't know enough or as much to know "Why is the sky blue" either.
Just pass along this example:
If you're setting up a new PC for the first time, check if your router is fully compatible with Windows. Because of the new networking features in Windows (8.1), some older network routers aren't fully compatible and can cause problems. For a list of routers that are compatible with Windows 8.1 and Windows RT 8.1, go to the Windows Compatibility Center.
Anyone remember when 10.4.0 had so many issues with LAN that it could not be used, work on fix was going on and wasn't complete until 10.4.2/4.3 (and first time we got a new full 10.4.3 DVD because customers needed a reliable system.

When I tried to back up my computer, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old files, the folders are there, but NONE of the files are.

I haven't backed up my computer in over a year. When I tried to back it up today, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old photos and documents (including all the pictures from the year I studied abroad/traveled a bunch), the folders are there, but NONE of the files are.
Does anyone have any idea what the problem might be, or how I could fix it? I really don't want to lose all those photos

So you were doing a time machine backup to another partition on the same hard drive? Just trying to gather some information so i can provide a helpful response.

PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the

PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the apps back?

adobeamatuer
Thanks for the reply.
Although the security of Windows XP SP3 32 bit is compromised by Microsoft no longer supporting XP, if Windows XP was restored as claimed, you should still be able to install/uninstall Premiere Elements versions of it that you did before the Microsoft support removal.
I think a revisit to the Geeks would be in order. It may be that they could not restore Windows XP because of the Microsoft non support. I would take along the Premiere Elements installation disks so that you do not leave there without actually seeing Premiere Elements (or a non Adobe program) running on your restored Windows XP. What was the other software that you tried to use that did not work?
Please update us on your progress when you get a chance.
Best wishes
Thanks.
ATR
Add On...spelling correct 12 03 2014.

I'll ask this again. I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to LR (Facebook OK),

I'll ask this again. I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to Flickr (Facebook OK), now I can't get it to authorize, I loaded 3rd party JR plug in and still get can't authorize. Can anybody help? Basically LR is useless, it has been nothing but problems.

It would probably be better to continue your previous thread on the same question than to start a new one.

I have followed every forum's direction and continue to get an error 100 when I load the adobe installer assistant and try to sign in to complete the download of Adobe Pro XI trial.

I have followed every forum's direction and continue to get an error 100 when I load the adobe installer assistant and try to sign in to complete the download of Adobe Pro XI trial.

Hi Stacy ,
Please refer to the following link to get details and solutions about Adobe Download Assistant .Please see if that fixes the issue.
https://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
Regards
Sukrit Dhingra

Icloud download is incomplete. When I load the control panel it only partially loads. I do not get the page that offers feature

icloud download is incomplete. When I load the control panel it only partially loads. I do not get the page that offers features. Also when I look in my Windows Programs it shows that the icloud program has loaded 80MB vs 42MB. Can someone pelase help

Uninstall iCloud and reinstall it (reboot in between)

When I loaded the new ios7 software I found that now the kindle app will not sync my "furthest page read" from iPad, or vice versa. Can someone help me?

When I loaded the new ios7 software on my ipad, I found that I could not sync my iPad with the kindle app. I hesitate to delete the app and reload it in fear I will lose all my books. Can anyone help me?

Ask in the kindle forums.
Isn't all your kindle stuff archived by amazon, so that you can't lose it by deleting the app? In any case, nothing to do with Apple.

I tried to play candy crush, but when i launch, app closed. I tried all (reset, restart, reload, etc.) I have the app on my pc, but even if i try to sync, the app do not apply on my iphone. When i load the app direct on my iphone, same proplem, can t open

i tried to play candy crush, but when i launch, app closed. I tried all (reset, restart, reload, etc.) I have the app on my pc, but even if i try to sync, the app do not apply on my iphone. When i load the app direct on my iphone, same proplem, can t open

Thank you for your help are you aware of any apps that will work the iso 4.2.1 system that will let you watch movies on the phone. Also I tried to down load something else the other day and got message that Safari wont let you open this is ther any to see if i have the latest safari on my phone?

When is loaded the SID Table?

Similar Messages

Maybe you are looking for