When item category is changed demand is removed from Md04

Hi All,
I have a requirement in which when the item category is changed in Va02 they want to make the schedule line item category constant, and when this is done the demand is removed from MD04.What has to be made to remain in MD04.
Thanks & Regards,
Amarnath.

Hi,
This may be a configuration issue.
Check the settings for the old and new Item categories and which Schedule Line Categories are assigned to each.

Similar Messages

How to update Item level shipping data when item category is changed

Hi All,
My requirement is when user changes a sales quoatation item category value and presses 'Enter' then based on item category's value the corresponding item and it's sub-items' shipping data(delivery status) should be modified.
To achieve the same, i tried implementing the BADI CRM_ORDERADM_I_BADI which gets triggered when user makes changes in sales quoatation item level and presses enter. Now my query is within this implementation i am not able to use CRM_ORDER_MAINTAIN as it throws "Recursive_call" error so how can i update item level shipping within this implementation?
Regards,
Bharathy.

Hi Shwetha!
I have never used this FM....but i have had a look and u hace to update the structure:
PRODUCTS STRUCTURE BAPIBUS20001_PRODUCTS
In this structure: BAPIBUS20001_PRODUCTS-SHORT_TEXT.
Regards,
Mon

Change Purchase Requisition Document Type when item category is D

Hi experts,
i have problem, when i put servis number in to the servis line i havent change Purchase Requisition Document Type. Account
Assignment Category is K and Item Category is D. It is standard of Purchase Requisition? When i set that i can change document type when item category is D.
When i putting only material i can change Purchase Requisition Document.
Thx for your answer.
Laco

Hi,
One thing please note that once you select the document type and draft the PR and save the PR, you will get the doc number.
Once you get the document number you cannot change the PR document type .
The reason is document type is linked with number range so it cannot be changed because different seriers of document number is assined to differentdocument type.
And moreover document type is linked with the screen settings also. So I would request you to check the settings for each doc. type

A month ago my iPhone was stolen, I turned on Activation Lock but it never came out BUT an hour ago somehow my apple ID was changed and someone removed from the account both iPhone and iPad and the iPad was also removely wiped. Can Apple help me somehow?

A month ago my iPhone was stolen, I turned on Activation Lock but it never came out BUT an hour ago somehow my apple ID was changed and someone removed from the account both my iPhone and iPad and the iPad was also remotely wiped. As soon as I saw it I recover the password and return the access to my iPad. But iPhone is not registered for my apple ID any longer. Can Apple help me somehow? I have all the documents and the iPhone box. Will they lock the iPhone and return me access to it. I'm sure it's been attached to another apple ID.
PS. the apple ID I'm using on the discussons is not the hacked one.

Try contacting the Apple account security team and ask: http://support.apple.com/kb/HT5699.

Problem when I tried to change weblogic listen port from 7001 to 80

HI! I have problem when I tried to change weblogic listen port from 7001 to 80. When I changed from 7001 to 7777 then all works ok! But why not on 80? With apache all works ok on 80 too.
I restart my weblogic server and then I have following errors.
<2009.1.4 16:02:13 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to STARTING>
2009.1.4 16:02:14 oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkPr
oviderClass
INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.
framework.wls.spi.JMXFrameworkProviderImpl"
2009.1.4 16:02:15 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
<2009.1.4 16:02:22 EEST> <Notice> <Log Management> <BEA-170027> <The Server has
established connection with the Domain level Diagnostic Service successfully.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to ADMIN>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to RESUMING>
<2009.1.4 16:02:22 EEST> <Emergency> <Security> <BEA-090087> <Server failed to b
ind to the configured Admin port. The port may already be used by another proces
s.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default". The address 85.254.224.235 might be
incorrect or another process is using port 80: java.net.BindException: Address
already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Critical> <WebLogicServer> <BEA-000362> <Server failed
. Reason: Server failed to bind to any usable port. See preceeding log message f
or details.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[2]". The address 127.0.0.1 might be i
ncorrect or another process is using port 80: java.net.BindException: Address al
ready in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[1]". The address 192.168.0.102 might
be incorrect or another process is using port 80: java.net.BindException: Addres
s already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FAILED>
<2009.1.4 16:02:22 EEST> <Error> <WebLogicServer> <BEA-000383> <A critical servi
ce failed. The server will shut itself down>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FORCE_SHUTTING_DOWN>
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
Best regards!

Debuger,
It does not matter which WLS version I am using (although I'm using 10.3, the one that comes with JDev 11g).
The problem is that SOME OTHER PROCESS on your machine is listening on port 80. Guess you need to go to the Microsoft forums to find out how you can tell what that OTHER, NOT WLS process is.
John

VBU-FKSAA field not updated when the item category is changed

Hi,
The sales order is created with the item category ZZZZ which is not relevant for billing. So the VBUP-FKSAA value is blank which means not relevant for billing.
Now in the change mode, the item catg is changed to XXXX. this is relevant for billing. But even after changing the item catg the billing status is not changed. so the sales order can not be billed.
Please let me know if anyone has come across this problem and also the soution.

Thank You Vincent. It works for finish goods that currently have cost in the sap-bo (taking std or avg) . Do you what should I do when the item is receiving the first-transation and it is an inventory entry coming from DTW ? Because when I test this conditions, the field "price" is ignored and when I check the inventory entry sent using dtw the recorded cost is "cero".
Thank a lot
Salomon Ponce

SO Delivery date change when item category is modified

Hi expert,
When i change the item category on my SO, the delivery date change.
Can you please give me the configuration, or exit to check how the delivery date is calculated?
Regards.

- Set a breakpoint at function module SD_SCHEDULING
- Change your item category
- This should trigger your breakpoint (if SD_SCHEDULING is changing the delivery date)
- Post screenshot of call stack back here.
Looking at the call stack will give us an idea of why a new scheduling is triggered.
If SD_SCHEDULING is not called, then I assume it must be a user exit causing the issue - check your coding in the SD user exits of include MV45AFZZ.

Item category not change able after saving

Hi guys,
I have a problem (ECC 6.0).
After saving a sales order, I'm not able to change the item category for the added item after saving the document. It's some kind of service material (DIEN) to charge labour to the customer.
I found that if I maintain the MRP3 view with the strategy group 10, I'm able to change the category after saving. But as the MRP views are disabled for service materials (DIEN) and there's no need for MRP for service materials, I don't get rid of the problem.
Please help me to solve that problem.
Best Regards,
Florian

Normally If it is open sales order then you can able to change the item category provided manual item categories available in T Code - VOV4, if there are any subsequent documents are there then you are no longer to change the same.

Item category determination during Purchase Requisition creation from APO

Im creating a SNP Purchase Requisition in APO and when it is published to R/3, a Purchase Requisition document is created in R/3.
When this PR is created in R/3, I want the Item Category to be determined based on the Material master Special Procurement Type. ( eg: Id like the Item category to be L if the Material master Special Procurement Type = 30 (Subcontracting) ). But by standard, this field is coming as Blank and this field could only be populated during the creation from APO.
I found a user exit ( CIFPUR02 : Enhancement of Purchase Order Interface (Inbound) ) on R/3 where I tried to populate the Item Category, but when I do this, all the purchase order related data is getting deleted and hence no PRs are getting created in R/3.
Could anyone please tell me if this could be resolved using configuration and if not any tips to do this technically would be very helpful.
Thanks,
Harsha

Hi Karun,
This is the code i'm using...
select single * from marc into lit_marc
where matnr = c_eban-matnr
and    werks = c_eban-werks.
append lit_marc.
read table lit_marc with key matnr = c_eban-matnr
                             werks = c_eban-werks
                             sobsl = 30.
if sy-subrc = 0.
c_eban-pstyp = '3'.
endif.
Here sobsl = 30 is the Special procurement type
But when i try to populate c_eban-pstyp = '3', during the creation of Purchase Requisitions in R/3, in the program SAPLEMPI -> LMEPIF01
this condition is encountered which deletes all the data in the tables that is used to create Purchase requisitions.
<i>* get rsnum in the case of subcontracting
      IF XEBAN-PSTYP EQ PSTYP-LOHN AND                      "RB240999
         EXITFLAG_ORDID IS INITIAL.                         "RB240999
refresh all component tables
        CALL FUNCTION 'ME_COMPONENTS_REFRESH'
             EXCEPTIONS
                  OTHERS = 1.</i>
Could you please suggest me anything to get around this.
Thanks,
Harsha

All Settings Suddenly Changed - All Info Removed from Iphone

This morning I went to sync as usual and got an error message saying "not enough space on my iPhone".. which has never happened before.... As I started to investigate, (using the iTunes inteface) it looks like all my music was removed from my phone. Now, when I look at the bar diagram of my iPhone 90% of my space is filled with "Other"......
I have done nothing different to my iPhone or to my computer, and wondered why all my settings got wacked?
Am I crazy (like it says on my bracelet?) or have others ran into this issue?

What happened was some part of your last sync was corrupted and, subsequently, your information was garbled. Since the iPhone can't read the garbled information, it reports it as other.
You need to restore the phone from iTunes and the problem will be corrected.

When do surfaces get uploaded to VRAM / removed from VRAM?

Hello! I'm aware of the differences of cacheAsBitmap and cacheAsBitmapMatrix and when to use them. However, can someone answer me the following questions?
1. If I set cacheAsBitmap=true - when does the DisplayObject get rendered into a bitmap? at the next screen update or when the object is next time actually visible on the stage?
2. same question for VRAM upload. If i set cacheAsBitmap=true - at what moment does the bitmap get uploaded to the GPU? right after it got rendered or only when it next time appears on the screen?
3. if I set cacheAsBitmap=false - does the texture get removed from VRAM instantly?
4. what happens if a DisplayObject that has cacheAsBitmap=true is set to visible=false. Will the texture persist in VRAM memory?
of course the questions apply when GPU rendering is used.
Thanks!

No one?
it'd be really great to know something about the internal workings in order to optimize performance.
Also - at what point do BitmapData's get uploaded and removed to/from VRAM?

When importing, de-select images I want removed from disk. After import they are still there?

When I take all the raw images from my card and put in a new folder on my desktop. I then move folder to my pictures folder on a MAC/lightroom 4.Then open up LR and select onlyy images I am interested in and (remove from disk) ones I don't want. Then import to lightroon, for some reason they are still in folder in pictures?

It is not very clear what you are exactly doing.
Did you import them all and want to delete after importing , then :
The choice you get is:
Remove ( from Lightroom) and
Delete from Disk, it is only the latter that will delete them from your disk.
During import you can not delete not selected files.
Frans

Production order removal from MD04

Hi All,
I have set the deletion flag in the production order.Itis link to the Sales order which is open.Both the sales order and production order is showing in the MD04.How to remove the Production order only from MD04.
Please help me.
Thanks
Srini

Dear Srini,
I would suggest two ways to this:
1. Mark technically complete for the production order
Goto CO02, after entering the prod. order
-> Functions -> restrict processing -> technically complete
Save
2. Set rejection code in the sales order
Goto VA02, in the item overview, double your item
In Tab 'Status', enter the 'Reason for rejection'
Feedback whether it helps or not.
Ken

Change log needed when item Text is changed via a customised tab in PO

Hi all,
In ME21N, ME22N and ME23N we have added a tab CUSTOMERDATA which contains input to enter no. of batches. When ever we enter something, say 1 in the field for no. of batches, this will trigger a FM which will create a batch and update the TEXTS tab at item level with the batch created. This functionality is achieved using the exit EXIT_SAPMM06E_013.
Now the requirement is whenever the TEXTS tab is updated by means of CUSTOMERDATA tab, I can see that some text is added to the TEXTS tab. Now I want to see this in the change log at item level that text is updated.
I can see the change log when i manually go to TEXTS tab and change/add something but not when i do it via the CUSTOMERDATA tab.
Could you please help me how to achieve this.
Thanks in advance!
BR,
Aravind.

Ok, looks like you haven't received good replies yet, so here's what you need to do. The difference is that CHANGEDOCUMENT_TEXT_CASE is being called for the application transaction entry but not for your exit-based entry of the texts inside EINKBELEG_WRITE_DOCUMENT. This means that UPD_ICDTXT_EINKBELEG was not set - you need to make sure the field value is set to 'U' for the call.

Lr Mobile. Working with various Catalogs. Picture on portal are erased when Catalogs Backed to external HD and removed from MacBook.

So I work with various Catalogs on my MacBook. I believe most everyone has the same workflow. Creating Catalogs are a great way to improve the performance of Lr and a great tool for archiving.
The problem is the following: When backing up these Catalogs to an external HD and removing the Catalog from the MacBook. All of the pictures synched to Lr Mobile from these Catalogs are erased.
This is uncool. I think Lr Mobile at the very least should display a low quality JPG as Lr Desktop application does.
Here is a toke, I noticed on my iPhone that even though the pictures are gone, my used memory remains high. I tried clearing cache but it didn't move the needle.
So it seems as Lr Mobile knows there were some pictures synched, and recognizes that these pictures are no longer present, but fails to erase them from memory.
1) Need Low quality JPGs on Lr Mobile to show pictures of your synched catalogs that are not longer the catalogs been worked on.
2) Lr Mobile (iPhone?) memory issues.
Thanks,
Daniel

So I work with various Catalogs on my MacBook. I believe most everyone has the same workflow. Creating Catalogs are a great way to improve the performance of Lr and a great tool for archiving.
The problem is the following: When backing up these Catalogs to an external HD and removing the Catalog from the MacBook. All of the pictures synched to Lr Mobile from these Catalogs are erased.
This is uncool. I think Lr Mobile at the very least should display a low quality JPG as Lr Desktop application does.
Here is a toke, I noticed on my iPhone that even though the pictures are gone, my used memory remains high. I tried clearing cache but it didn't move the needle.
So it seems as Lr Mobile knows there were some pictures synched, and recognizes that these pictures are no longer present, but fails to erase them from memory.
1) Need Low quality JPGs on Lr Mobile to show pictures of your synched catalogs that are not longer the catalogs been worked on.
2) Lr Mobile (iPhone?) memory issues.
Thanks,
Daniel

When item category is changed demand is removed from Md04

Similar Messages

Maybe you are looking for