Item category not change able after saving

Hi guys,
I have a problem (ECC 6.0).
After saving a sales order, I'm not able to change the item category for the added item after saving the document. It's some kind of service material (DIEN) to charge labour to the customer.
I found that if I maintain the MRP3 view with the strategy group 10, I'm able to change the category after saving. But as the MRP views are disabled for service materials (DIEN) and there's no need for MRP for service materials, I don't get rid of the problem.
Please help me to solve that problem.
Best Regards,
Florian

Normally If it is open sales order then you can able to change the item category provided manual item categories available in T Code - VOV4, if there are any subsequent documents are there then you are no longer to change the same.

Similar Messages

FXG does not change image after saving.

I have installed the fxg plugin. I can make edits and save, however, in Catalyst the image does not change. I have follwed the instructions to the letter, but no changes are made. I refreshed the artboard but that didn't help either. What am I missing?

I also encounter the same issue.

BED not changing value after Qty change in MIGO

Hi,
When we are doing MIGO, a message is coming - Ensure that you can receive more quantity on the same excise invoice..after that we can't save the document.
Scenario:
First i do J1IEX, there Excise Invoice Quantity was 1216 and BED was 684.61 on it.
But when we do MIGO, We are just changing the Qty from 1216 to 1000. BED should calculate automatically after change the Qty but not changing.
After that when we are going to post the document, above mentioned message coming and document not saved.
Please guide..
Anil

Solved myself..
Solution is maintain the Excise Group with below path: -
SPRO--> Logistics General --> Tax on Goods movement --> India --> Basic Settings --> Maintain Excise Group.
Now db click on suitable Excise Group. There, check on EI capture under MIGO Settings window.
After done that at the time of MIGO, BED rate should calculate automatically.
Thanks all....

Item category not available in the table T184

Hi Gurus,
When the PP consultant is trying to Create Individual Items using MD81, it is giving the error " Item category not available in the table T184" But from the SD side, I have assigned the item category to the sales document type. also the field for item category ( PSTYV ) is present in the table T184. What can be the problem? is this any issue related to SD?
Thanks & Regards
Kaushik Ghosh

Check the material master for the material for which you are trying to create the Independent Requirements. The Item Category group mentioned should be be wrong there, as by message i am understanding that system is not able to determine the Item Category for your concerned material.
Item category determination is done in T184 table with the combination Sales Document Type/Item Category group/Item Usage/Item Category of Higher level item/ Default Item Category.
Hope this helps.
Regards,
Vivek Sahni

TO confirmation error - item category not defined

Hi experts,
We have a HU/WM setup in our warehouse. While i try to confirm the TO i am getting an error 'item category not defined'?
I am able to confirm the TO's for other orders, this is happenning for a specific group of orders which have a different item category in delivery.
Any hints when this error will appear?
Is there any config where we assign the delivery item category with the warehose or any other setting?
Thanks,
Harish
Edited by: Harish RJ on Jan 24, 2011 7:02 AM

I suggest have a look at OSS note 1464539 - your settings in table T184L might be wrong.
Is it possible that the batch is determined via WM, during picking? If different batches have been determined for one item, it will cause batch split in your delivery - if settings in T184L are wrong, system cannot cope with it and may throw error message VL324.
(sorry for duplicate, I was slow a little bit and "Sap: IN" said the same in the meanwhile)
Edited by: Csaba Szommer on Jan 24, 2011 8:29 AM

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

Item category not defined in batch split in vl02n

HI GUrus,
cna anybody please helpe me with this. We have to send 3 differnt batches of parts to the vendor via returns PO. when i go to vl02n and click on batch split to send out batch A - 5 EA, Batch B - 5 ea and Batch C - 5 ea. the system is throwing eerror messages like item category not defined. please help me with this
thanks
anusha

I can't understand what are you doing...
1. You already asked this question - it was answered
2. Link is pasted in my previous message.
Please read your previous question (that was the same) - please read the answer too. That's all.

When item category is changed demand is removed from Md04

Hi All,
I have a requirement in which when the item category is changed in Va02 they want to make the schedule line item category constant, and when this is done the demand is removed from MD04.What has to be made to remain in MD04.
Thanks & Regards,
Amarnath.

Hi,
This may be a configuration issue.
Check the settings for the old and new Item categories and which Schedule Line Categories are assigned to each.

VBU-FKSAA field not updated when the item category is changed

Hi,
The sales order is created with the item category ZZZZ which is not relevant for billing. So the VBUP-FKSAA value is blank which means not relevant for billing.
Now in the change mode, the item catg is changed to XXXX. this is relevant for billing. But even after changing the item catg the billing status is not changed. so the sales order can not be billed.
Please let me know if anyone has come across this problem and also the soution.

Thank You Vincent. It works for finish goods that currently have cost in the sap-bo (taking std or avg) . Do you what should I do when the item is receiving the first-transation and it is an inventory entry coming from DTW ? Because when I test this conditions, the field "price" is ignored and when I check the inventory entry sent using dtw the recorded cost is "cero".
Thank a lot
Salomon Ponce

Item Category - Not editable

Hi, can anyone advise why some item category cannot be saved once the SO is saved? E.g Make to Order scenario. Is there a way to make this item category editable even after SO has been saved before?
Thanks
Peter

Hi peter
In general the item category gets grayed out and if it should not get grayed out you need to integrate with the ABAP'ers
One alternative is as you have saved the sales order , go to VA02 and and enter the same material again and then only you can change the item category manually , provided you have maintained manual item categories in VOV4.
Regards
Srinath

Sharepoint Designer - Two step List Workflow task item is not changing the status from not started to Complete

Hi
Using SPD i am creating list workflow.
Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected".
Problem is "Assign a to do item" is assigning the task to manager. But after manager approves the status in the task list not changed to "Completed". Still it is showing "Not started". I dont want to manually complete the task.
Please help me for automatic process.
What i should do to change the status to "Complete" automatically after manager approval
Regards
Jhanani
Janani.R

Hi Janani,
From your description, you would like to create an approval workflow for a list. When an employee submit a request to the list, an approval task should be assigned to manager, then manager could approve or reject the request. From the request list,
we should be able to see the Approval task’s status.
Not understand the reason of designing the workflow to two steps, an approval action should be enough from my understanding. For producing, I create a list named Request list, then customize it in InfoPath form to add a Request field for stating request
content. Then add a workflow to list named Approval task, add the action of Start an approval process with administrator and make the workflow automatically start when item is added.
The image below shows the status of Adding items, Approving and Rejecting. Please check if it could meet your requirement.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Item Category not Defined Error message when deleting a batch item in Deliv

Hi,
I am trying with a Intercompany transfer . So after creating Interco. Transfer we have followed with a delivery document.
Now,we would like to delete the delivery document. For your info. Del. doc is still open. We haven't gone for Goods issue or anything else.
So,we tried removing the batch line item in batchsplit tab of the delivery and then deleting the delivery document.
But we get the error message "Item catgeory Not defined". but we could see entries for Item category Determination with the particular Delivery typeItem Category Group from Material MasterItem Usage+Item Category.
Why does system throw "Item catgeory Not defined". when there are entries for particular determination available .
And this seems to be Syste
Thanks,
Dhilipan

Hello Sandy,
Thanks for ur update. But its ticked already.. We checked it.
But we still face this issue. And we are not able to replicate the same issue in QA..What cud be the reason.
But Config..seems exactly similar to Pro. and QA
Thanks,
Dhilipan

Item category not changeable in sales order

Hi
I have a material where the item category is not changeable in the sales order after you have pressed 'enter' after the material number. It is a bundle material number, with a BOM (structure scope 'A') - does this mean that the item category is greyed out for change?
It is causing a problem because to select the manual item category in item category assignment, you have to change it before you press enter (and when you do that it only gives you a full list of item categories rather than the ones you can select for the assignment table).
Jon

this is standard sap !
the reason is that if you change something that has relations with other object then problems can raise.
You cannot do anything for this but you can make a user exit at your own risk that 'opens' up the field:
the exit looks like this:
MV45AFZZ
FORM userexit_field_modification.
CASE screen-group2.
    WHEN 'LOO'.
      IF screen-name = YourItemCategory AND xvbup-gbsta = ' '.
        screen-input = 1.
        MODIFY SCREEN.
      ENDIF.
ENDCASE.
ENDFORM.                    "USEREXIT_FIELD_MODIFICATION
ROberto

How to update Item level shipping data when item category is changed

Hi All,
My requirement is when user changes a sales quoatation item category value and presses 'Enter' then based on item category's value the corresponding item and it's sub-items' shipping data(delivery status) should be modified.
To achieve the same, i tried implementing the BADI CRM_ORDERADM_I_BADI which gets triggered when user makes changes in sales quoatation item level and presses enter. Now my query is within this implementation i am not able to use CRM_ORDER_MAINTAIN as it throws "Recursive_call" error so how can i update item level shipping within this implementation?
Regards,
Bharathy.

Hi Shwetha!
I have never used this FM....but i have had a look and u hace to update the structure:
PRODUCTS STRUCTURE BAPIBUS20001_PRODUCTS
In this structure: BAPIBUS20001_PRODUCTS-SHORT_TEXT.
Regards,
Mon

Why some items can not change issue method in Production Order?

Hi,
I have a Production Order which had been released.
As some reason, I need to change issue method on some items in this Production Order, but I found that some items can be changed with a dropdown list, and some items can not be changed without dropdown list.
Why they are different?
What should I do to meet my users' request?
Thanks.

Hai wilson,
sorry i visits forum after long time .. item category means , when create item group there are two option Service / Material if u select service , inventory come under that group only in "Back flush" other wise u can select "Manual / Back flush"
Regards
Janeesh

Item category not change able after saving

Similar Messages

Maybe you are looking for