When recording all other channels come up with a w...
This has only started since the second stage digital changeover, I have tried re-booting the system and unplugging the ariel to enable a fresh update of all channels but it's made no difference. Previously after the first stage changeover the blocking problems and weak signal warnings that started occuring evry couple of days were cleared by powering down and then switching back on.
Hi moggie1965 and welcome
I too had issues after my area went through the dso
I upgraded my aerial but more importantly the aerial cable to satellite quality cable
This may also help you, have a read - http://community.bt.com/t5/BT-Vision/RG6-or-PF100/m-p/265615#M20679
-+-No longer a forum member-+-
Similar Messages
-
How to program to trigger off a channel then recording all other channels?
I am converting my program from Visual C++ 6.0 to .NET (yup we are kind of slow so that we can use the new NIDAQ driver with M card. Now I have some trouble converting the data acqusition routine. I am trying to trigger off a channel then record data from all the channels. I was told that I will have to have an extra circuit to wire the channel to TTL line. Is this true? I never had to do this in the older software. I basically set the pretrigger and use SWAnalog and that is it. The following is the code from the older software. Right now in my .NET evenvironment, I basically monitor the voltage from the trigger channel then once the voltage exceed the level, I went into my buffer to grab the pretrigger and post trigger data. It was fine except that the buffer is kindda huge and it slows down the data acq process by far since we still have older PC that is slow. I attached the code of the new way (in .NET) that I am doing with this message as well. Sorry for a long message and I hope someone can help me out!! Thanks, Yajai.
//// Older way
void CWinTFSView:tartDaq()
COleVariant vOptional((long) DISP_E_PARAMNOTFOUND, VT_ERROR);
CString ScanChannels[9];
int Device;
long Scans;
float SampleRate;
float ScanRate;
long PreTriggerScans;
Device = 1;
Scans = int (m_ActualPointPerRecord) *m_TotalChannel;
SampleRate = (int) (1000000/(m_TimePerPoint));
ScanRate = SampleRate;
PreTriggerScans = m_TriggerDelay/m_TimePerPoint;
m_CWAI.GetChannels().RemoveAll();
// InsertChannel
ScanChannels[1].Insert(0, "0");
ScanChannels[2].Insert(0, "1");
ScanChannels[3].Insert(0, "2");
ScanChannels[4].Insert(0, "3");
ScanChannels[5].Insert(0, "4");
ScanChannels[6].Insert(0, "5");
ScanChannels[7].Insert(0, "6");
ScanChannels[8].Insert(0, "7");
CString Ch ="";
bool First = TRUE;
for(int i = 1; i< 9; i++)
if(m_Ch[i] == TRUE)
switch (m_NiGain[i]) {
case 1:
m_CWAI.GetChannels().Add(ScanChannels[i],CNiVariant(10),CNiVariant(-10), vOptional, vOptional);
break;
case 2:
m_CWAI.GetChannels().Add(ScanChannels[i],CNiVariant(5),CNiVariant(-5), vOptional, vOptional);
break;
case 4:
m_CWAI.GetChannels().Add(ScanChannels[i],CNiVariant(2.5),CNiVariant(-2.5), vOptional, vOptional);
break;
m_CWAI.SetDevice(Device);
char temp[10];
int RealTriggerCh = m_TriggerChannel - 1;
itoa(RealTriggerCh, temp, 10);
m_CWAI.GetStopCondition().SetType(cwaiSWAnalog);
m_CWAI.GetStopCondition().SetLevel(m_TriggerLevel);
m_CWAI.GetStopCondition().SetSource(temp);
m_CWAI.GetStopCondition().SetPreTriggerScans(PreTriggerScans);
m_CWAI.GetStopCondition().SetMode(cwaiFalling);
m_CWAI.SetNScans(Scans);
m_CWAI.GetScanClock().SetFrequency(ScanRate);
m_CWAI.GetStopCondition().SetHysteresis(float (0.05));
m_AcquireMode = true;
m_CWAI.Configure();
//delay function
int k;
for(i = 1; i<= m_TIME_DELAY; i++)
k = 1;
m_CWAI.Start();
Attachments:
code.txt 4 KBHello DrObb,
I'm not sure I know exactly what you are trying to do, but I'd like to offer some suggestions. First, it looks like you are trying to use some sort of software analog triggering? Depending on your M Series device, you might be able to use hardware analog triggering. The 625x and 628x families have hardware analog triggering capabilities. You can use an analog trigger on any one of the analog input channels or the APFI line. Additionally, all M Series have digital triggering support. So it should not be necessary to use external circuitry unless you have a 622x device and you need analog triggering.
As far as the .NET programming, I suggest looking at some existing shipping examples. If you included .NET support when you installed NI-DAQmx, you should have a bunch of .NET examples in the following directory (regardless of whether or not you have measurement studio): C:\Program Files\National Instruments\MeasurementStudioVS2003\DotNET\Examples\DAQmx\Analog In\Measure Voltage
It looks like you probably want to use an analog reference trigger (if you want pre and post trigger data). So you might have to take pieces of a couple examples, like the analog start trigger example and the digital reference trigger example. Good luck, re-post if you have additional questions!
-Alan A. -
When connecting to Itunes it asks to review. When I review and put in all details it comes up with red writing to contact support. Why and how?
We are fellow users, we won't know why. You can contact iTunes Support via this link : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
Has anyone heard if and when they r going to come out with i-pod touch 5th generation
Has anyone hear if and when they r going to come out with i-pod touch 5th generation?
Apple has made no announcement about any future models of iPod, and until they do there's nothing anyone here can tell you. We'll all just have to wait.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question. -
I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
Thanks in advance.Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium -
When I open Muse it comes up with a 'new version is available' and when I click on 'install now' it takes me to the adobe muse website where I click on the 'Download' button. It will then come up with 'Muse is downloading now'. It will then take me back to the Muse app again with the same 'install now' message. The new version has not installed, could some one please let me know the reason why it isn't installing.
Hi Jeff I have uninstalled Muse from my applications and have tried to download the new version but it displays a message 'file not found'. I have included a screenshot.
-
My iTunes card won't redeem and when I try to it comes up with this "The gift certificate or prepaid card code you entered has not been properly activated. Please contact iTunes Store costumer support for assistance" can anyone help me?
Is the store that you bought the card from nearby so that you can try going back and asking if they can activate the card properly ? If it's not, or if they can't/won't activate, then you will need to do as the message says and contact iTunes Support (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes (you will probably need to give them images of the front and back of the card, and possibly its receipt)
-
How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.
Photos that were synced from a computer won't show for copying to a computer. If you want to copy them back then you will need a third-party app on your phone such as Simple Transfer which can copy them off via your wifi network. But photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer (e.g. their dimensions might be different and their colours may look a bit different).
-
my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do
Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen -
After downloading ios7 when someone texts me it comes up with their email address and no number??
After downloading the new ios7 when someone texts me it comes up with their email address and no number how do i get it just the number and no email address?
The sending person needs to go their settings go to Messages go to send & receive and select your phone #
-
Can't print a photo. When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh. Uploaded latest update but it still doesn't work. Was going to try and load the software again but can't find the source as a download.
Cheers,
PapasailorYOu need to reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
When will the iPod Touch come out with more gb?
When will the iPod Touch come out with more gb?
Right now there is 32gb, when will the 60gb come out?The [Terms of Use (Section 2.1.1)|http://discussions.apple.com/help.jspa#terms] for these forums forbid us to speculate on future Apple products. No one here knows, and those who do are under a non-disclosure agreement.
Regards. -
I updated my iPhone 4S weeks ago and today it said I needed to update it again, so I did. Now when I send iMessage it comes up with my email address and not my number. How do I fix this?
The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 or 10.8 is part of the 10.6.6 update.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0 -
Since upgrading to iOS 7.0, my friend can no longer text me. I get all other people's texts with no problem. I can text her, she can't text me. It bounces back to her phone as "message undeliverable". Does anyone know what to do about that?
your number can remain on the imessage server for some time
-
Every time I turn my computer on and open iTunes all my music is gone, if comes up with the scan media page, all my playlists have been deleted. All my music is still on the computer and in the files. I don't know why it keeps doing this, it's really annoying as I have loads of music and then have to do my playlists again just to sync my phone. Can someone please help??
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied and renamed asiTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device. Even if you have the media you can use selected steps from the tip to ensure that you don't lose settings and data from the device as a result of switching libraries.
A large number of users with this issue have been using AVG Anti-Virus which appears to be implicated in the problem. AVG have released a patch which might help, so if you use AVG then I would update that first. I'd also be interested to know which AV you use in case others may cause similar issues. I recommend excluding the iTunes folder from any real-time and scheduled AV scanning process. Another possible cause could be automatic backup tools.
tt2
Maybe you are looking for
-
Installing the patch to make adobe photoshop elements 9 work with windows 7 computer
Adobe Photoshop Elements 9 has been installed in our new computer with windows 7.However, we can not get pictures to download from our digital camera into the new computer. A computer tech tried to do this several times and each time it said the "pat
-
Tried to open my old MacBook. Couldn't remember password. Followed suggestion to reinstall hardware. Now startup disk is stuck in computer and it won't turn on. I keep getting a message saying I need to restart the computer. When I hold down pow
-
How to remove virus, malware from mac?
please help i used an website that later that had phishing activity and virus , today my friends said they received emails with files on it HOW DO I REMOVE THIS VIRUSES FROM MY COMPUTER ???? PLEASE HELP
-
Display Showing Negative Colors From Mini?
I helped my mom buy a Mini a few years ago... 1.25 GHz PPC G4. Anyway, she has started to have LCD display issues where colors are reversed like photo negatives, such as she describes that the screen is mostly orange, icons are black, and email windo
-
Hi, Can anybody tell me how to change the background colour of my tooltips. Thanks Jim